lights MAZDA MODEL 6 2015 Smart Start Guide (in English)

9
SHIFT POSITION
INDICATOR LIGHT SPEEDOMETER
Instrument Cluster
TACHOMETERAMBIENT
TEMPERATURE
TYPE A & B CLUSTER GLOSSARY WARNING AND INDICATOR LIGHTS
NOTE:
See Owner’s Manual for more details and explanations.
Type A cluster is
shown. Type B
cluster is similar,
but with warning
lights in different
locations.
The instrument cluster has a dimmer function that can be
cancelled to make the illumination brighter during the day
when the headlights are on. If the illumination
is too dim during the day, push the knob,
or if the illumination does not dim when
turning on the headlights at night,
push the knob. When dimmed,
rotate the knob to adjust the
brightness of the illumination.
Lan e Departure Warning
System On ( AMBER)/
Lane Detected ( GREEN) ( p . 17 )
AFS
OFF

Ad
aptive Front Lighting System
(AFS) OFF ( p. 14)
Tr action Control System (TCS)/
Dynamic Stability Control (DSC) On: TCS/DSC malfunction
Flashing: TCS/DSC operating
BSM OFF

BS
M OFF (Blind Spot
Monitoring) (pp. 25-26)
OFF
Dy
namic Stability Control

(DSC) Off Indicator Light SPORT Mode On ( p. 19)
Lights On (Exterior) ( p . 11)
High Beam Control On ( p. 13)
Headlight High Beams On
Air Bag/Front Seat Belt
P
retensioner System
Malfunction
Ch eck Engine Light
Se at Belt Unbuckled/
Malfunction
Tu rn Signals/Hazard

Warning Indicator Lights
Ti re Pressure Monitoring System
(TPMS) Warning Light* ( p. 18) On/ Warning Beep: Low tire pressure in one
or more tires. Flashing: TPMS Malfunction
Cr uise Main Indicator Light

On ( AMBER )/Cruise Set
Indicator Light On ( GREEN)

Mazda Radar Cruise Control Wa
rning Light On ( AMBER)

Se

t Indicator ( GREEN)
(pp. 15-16)
ABS (Antilock Brake
S ystem) Malfunction
Sh ift Position Indicator Light
Sec urity Indicator Light
*TPMS NOTE:
Low ambient temperature and/or high altitude causes tire pressures to drop
and may turn the TPMS warning light on. If the warning light comes on, check the tire pressure
and fill the tires as soon as possible, preferably before moving the vehicle and warming up
the tires. Initialize system (p. 16). Tire pressure should be checked when the tires are cold.
1660320_15b_Mazda6_SSG_021714.indd 92/17/14 11:12 AM

10
DASHBOARD ILLUMINATION/
DIMMER1/TRIP METER2
1 • Rotate the knob to adjust the brightness of the
instrument cluster and other dashboard illuminations.
2 • Push to toggle between trip meter (A & B). • When a trip meter is selected, push and hold
to r
eset to zero.
www.MazdaUSA.com
Br ake Warning Light
Parking brake on/low brake
fluid/malfunction
Master Warning Light
Low Fuel Level
TYPE B INSTRUMENT CLUSTER
WARNING LIGHTS ONLY.
These warnings are displayed as text in the Type
A Information display.
Lo w Engine Oil Pressure
Po wer Steering Malfunction
Au tomatic Transaxle

Warning Light
Cha rging System
Malfunction
Doo r/Trunk Ajar
Lo w Washer Fluid Level
Warning Light
KEY Warning Light RED
KE Y Indicator Light GREEN
Check Fuel Cap
P erform Maintenance FUEL
GAUGE
ODOMETER/

TRIP METER
ENGINE COOLANT TEMP LIGHTS Since this vehicle does not use an
engine coolant temperature gauge, red
and blue engine coolant temperature
lights are used to indicate high
and low coolant temperature.
Red Coolant Temp Light Flashing: Engine is starting
to run hot. Drive slowly to
reduce engine load.
On: E

ngine is overheating. Safely pull
over to the side of the road and turn
the engine off. Refer to the Owner’s
Manual for more information.
Blue Coolant Temp Light On: Engine coolant is cold
and no warm air is available
for heater/defroster.
Of

f: Engine coolant is warm and
warm air is available for heater/
defroster. The light may stay on for a
few minutes after start-up when the
engine is cold, but the vehicle can
be driven with the light on or off.
INFORMATION D I S P L AY
See page 6 or the
Owner’s Manual for
further information.
TYPE B CLUSTER
INFORMATION D I S P L AY
1660320_15b_Mazda6_SSG_021714.indd 102/17/14 11:12 AM

11
Lights
LIGHTING CONTROL/TURN SIGNAL LEVER
: Turns tail, parking, dashboard,
a nd headlights on.
: Turns tail,
p
arking, and
dashboard
lights on.
Pull
to Flash
High BeamsPush for

High Beams
NOTE: The DRL (Daytime Running Lights) automatically turn on when the ignition is
switched ON. To disable/enable this feature see your Authorized Mazda Dealer.
AUTO: The light sensor
automatically determines
when to turn the headlights
on or off.: Turns fog lights
on
only when
headlights
are on.
Smart Turn: To signal a lane
change, push the turn signal lever
up or down halfway and release.
After releasing the lever, the turn
signal indicator will flash three times.
(Refer to page 6 or Owner’s Manual
for “Personalization Features”)
1660320_15b_Mazda6_SSG_021714.indd 112/17/14 11:12 AM

13
High Beam Control
1. Turn the headlight
switch to the
AUTO position.
2. Pus

h the headlight
lever forward to the
High Beam position.
When the HBC system is on, the HBC indicator light in the instrument
cluster will illuminate (
GREEN). The High Beam indicator light will turn On
(BLUE) when the HBC system switches to high beam and will turn Off when
the HBC system switches to low beam.
HIGH BEAM CONTROL (HBC) (if equipped)
While driving the vehicle at speeds above 18 mph (30 km/h), the headlights
are switched to high beams when there are no vehicles in front of your
vehicle or approaching in the opposite direction.
The HBC system switches to low beam when:
•
The

system detects a vehicle or the headlights/lights of a vehicle
approaching in the opposite direction.
•
Dr

iving on roads lined with street lights or well-lit cities and towns.
•
At s

peeds of 12 mph (20 km/h) or lower.
OPERATIONAUTO
FORWARD
1660320_15b_Mazda6_SSG_021714.indd 132/17/14 11:12 AM

14
NOTE:
• With AFS, it is normal to see the headlights move and hear the sound of the
h
eadlight leveling motors at the front of the vehicle when the ignition is ON.
•
Th

e system will need to be reset if the vehicle battery has been disconnected
or the system fuse has been replaced. Please refer to your Owner’s Manual
for easy to follow resetting instructions.
Headlightswww.MazdaUSA.com
With AFS
Without AFS
ADAPTIVE FRONT-LIGHTING SYSTEM (AFS) (if equipped)
The adaptive front-lighting system (AFS) automatically turns the
headlight beam to the right or left in conjunction with the direction of
the steering wheel.
The AFS improves the direction of headlight illumination while cornering, and
only works when the vehicle is moving.
Push AFS OFF to turn system off or on. When off,
AFS OFF illuminates in the instrument panel.
1660320_15b_Mazda6_SSG_021714.indd 142/17/14 11:12 AM

17
LDWS
LANE DEPARTURE WARNING SYSTEM (LDWS) (if equipped)
The Lane Departure Warning System (LDWS) recognizes painted lane
lines on a road using the forward sensing camera (FSC) installed to the
windshield. If the vehicle deviates from its lane at speeds of 37 mph
or higher, the system alerts the driver of the lane departure using the
following indicator lights and warning sound.
NOTE: Any driver input (e.g., turn signal,
steering or acceleration) will cancel warning.
Indicator Light Multi-Information Display Condition
The painted lane lines
on the road are not
recognized or the vehicle
speed is less than 37 mph
The painted lane
lines are recognized
at vehicle speeds of 37 mph or more
Flashes +
warning sound OR
Warning is triggered
when vehicle deviates from its lane
No indicator light
LDWS OFF
WARNING: LDWS is only a
supplementary system for the prevention
of a lane departure, however the LDWS
functions have limitations. Do not rely
solely on the LDWS. Relying solely on
the LDWS may cause an unexpected
accident resulting in death or serious
injury. Always make lane corrections
using the steering wheel and drive safely.
Use the LDWS switch to
turn system ON or OFF
1660320_15b_Mazda6_SSG_021714.indd 172/17/14 11:12 AM

25
Blind Spot Monitoring System
BLIND SPOT MONITORING (BSM) (if equipped)
The Blind Spot Monitoring (BSM) system is designed to assist the driver
by monitoring blind spots on both sides of the vehicle to the rear in
certain situations such as when changing lanes on roads and freeways or
reversing the vehicle from a parking garage.
The Blind Spot Monitoring (BSM) System consists of the Blind Spot Moni\
toring
(BSM) and Rear Cross Traffic Alert (RCTA).
Turning BSM System Off
Turning the BSM system off will turn off both the light and sound
indicators. To manually turn the BSM system off, push the BSM
OFF switch on the dash. The BSM OFF indicator will illuminate
in the instrument cluster when the BSM system is off. The BSM
system will automatically turn on the next time the vehicle is started.
•
If y

our vehicle speed is 6.7 mph (10.8 km/h) or more, the BSM will warn
you of vehicles in the detection area by illuminating the BSM warning
lights located on the left and right door mirrors.
•
If y

ou operate a turn signal in the direction of an illuminated BSM warning
light, the system will also warn you with a beep and warning light flash.
•
BS

M sensors are located under the left and right rear bumper areas.
The BSM system may not operate properly if the rear bumper gets too
dirty, so keep the rear bumper area clean.
Your Vehicle
Detection Areas
Please refer to
your Owner’s
Manual for
complete details.
NOTE: Do not rely completely on the BSM system and be sure to look
over your shoulder before changing lanes:
•
Th

e BSM can assist the driver in confirming the safety of the surroundings,
but is not a complete substitute.
•
The

driver is responsible for ensuring safe lane changes and other maneuvers.
•
Al

ways pay attention to the direction in which the vehicle is traveling and the
vehicle’s surroundings.
•
Th

e BSM does not operate when the vehicle speed is lower than about 6.7
mph (10.8 km/h).
1660320_15b_Mazda6_SSG_021714.indd 252/17/14 11:12 AM

Keyless Entry ..............................1-2
• Advanced Keyless Entry* • Do
or Request Switch*
Starting the Engine
.....................3-4
• Push Button Start System •
Accelerated Warm-Up System (AWS)
• Em

ergency Vehicle Entry/
Engi

ne Start/Stop
Seats ..............................................5
Inf ormation Display ......................6
• Personalization Features*
Driver’s View ...............................7- 8
• Location of Switches and Controls
Instrument Cluster ...................9 -10
• Review of Warning and Indicator
L
ight Function and Location
Lights ............................................11
Wiper/Washer
...............................12
High Beam Control ......................13
Ad aptive Front

Lighting System (AFS)* ...............14
Mazda Radar Cruise Control* ..15 -16
Forward Obstruction Warning* ..16
L ane Departure

Warning System (LDWS) ...............17
Tire Pressure Monitor System ...18
• Initialize TPMS before delivery
Transmission ............................19 -20
Rear View Monitor* ......................21
Customer Deliver y Checklist
Commander Switch* ...................22
i -ELOOP ........................................23
Smart City Brake Support* .........24
Bl ind Spot Monitoring* ................25
Rear Cross Traffic Alert* .............26
Climate Control ........................2 7-2 8
• Manual • Au
tomatic*

Audio Controls .........................29-32
• Bluetooth Audio*
Se t Clock ......................................30

Bluetooth®* ...............................33-34
• Pair Phone • To l
l - F r e e • Ma
ke/Receive Cu stomer Service Ca

ll 800-430-0153
Navigation System* .................35-36
• SD Card •
Pl anning a Route
USB & AUX Input ..........................37
SCHEDULED MAINTENANCE When replacing or topping off engine
oil, use Mazda Genuine oil. For optimal
engine performance, use SAE 0W-20
engine oil. Please consult an Authorized
Mazda Dealer for additional information.
*if equipped
SALES CONSULTANT
DAT ECUSTOMER DAT E
All items in the Customer Deliver y Checklist have been reviewed with the
customer and the first maintenance appointment has been scheduled:
Signed copy must be placed in dealer jacket
VEHICLE PRESENTATION:
Refer to the Smart Start Guide during presentation
1660320_15b_Mazda6_SSG_021714.indd 392/17/14 11:13 AM