traction control MAZDA MODEL 6 2015 Smart Start Guide (in English)

35
Navigation System
TO REMOVE OR INSERT THE MAP SD CARD:
1 Tur

n the vehicle ignition OFF.
2 Lo

cate the sliding door on the lower left side
of t

he dash (see page 5) and slide it open (right).
• Re

move card: Push the card once, then pull it out.
• In

sert card: Push the card in (label-side up), then slide door closed (left).
NOTE:
• Visit www.mazdausa.com/navigation within 60 days of vehicle delivery and
download the most recent map available for your device for free. In order
to download or upgrade your map, the TomTom Home software must be
downloaded. Please refer to the Navigation System Owners Manual section of
www.mazdausa.com/navigation for additional information.
• Only use your MAP SD card for operating and updating your navigation system.
Do not insert the MAP SD card into another vehicle or into any other device such
as a camera.
• If your vehicle is not equipped with a factory navigation system, your audio system
can be upgraded to include navigation. Contact your Authorized Mazda Dealer for
more details.
SD Card
PLANNING A ROUTE USING THE TOUCH-SCREEN
To plan a route on your Navigation system,
do the following:
1


Pu
sh the NAV button to access the Navigation System.
2 T

ap the screen (above) to open the MAIN MENU (below).



3 To u

c h Navigate to .
4 To

u c h Address .
NOTE: Factory Navigation System is available if the vehicle is equipped with the
5.8” LCD screen. Contact your Authorized Mazda Dealer for more details.
NOTE: You can change the country or state
setting by touching the flag before you select
a city.
Navigation SystemI M P O R TA N T:
• In the interest of safety and to reduce
distractions while you are driving, you should
always plan a route before you start driving.
• Navigation route controls are disabled while
driving. Voice Commands can be
used to navigate while driving.
1660320_15b_Mazda6_SSG_021714.indd 352/17/14 11:13 AM