display MAZDA MODEL 6 2016 Quick Guide (in English)

When Driving
Advanced Smart City Brake Support (Advanced SCBS)/ Smart City Brake
Support [Forward] (SCBS F)/ Smart City Brake Support [Reverse] (SCBS R)
Advanced Smart City Brake Support (Advanced SCBS) (Except Indonesia,
Malaysia, and Taiwan)
The Smart City Brake Support [Reverse] (SCBS R) is a system which is designed to reduce
damage in the event of a collision by operating the brake control (SCBS brake) when the
system’s ultrasonic sensors detect an obstruction at the rear of the vehicle while driving at a
speed of about 2 to 8 km/h (2 to 4 mph) and the system determines that a collision is
unavoidable. In addition, when the driver depresses the brake pedal while the system is in
the operation range at a vehicle speed of about 2 to 8 km/h (2 to 4 mph), the brakes are
applied firmly and quickly to provide assistance. (Brake Assist (SCBS brake assist))
Smart City Brake Support [Reverse] (SCBS R)
The Advanced Smart City Brake Support (Advanced SCBS) alerts the driver of a possible
collision using the display and a warning sound when the Forward Sensing Camera (FSC) detects
a vehicle ahead or pedestrian and determines that a collision with the object is unavoidable while
the vehicle is driven at a vehicle speed of about 4 to 80 km/h (2 to 50 mph) if the object is a
vehicle ahead and about 10 to 80 km/h (6.2 to 50 mph) if the object is a pedestrian.
Smart City Brake Support [Forward] (SCBS F) (Indonesia, Malaysia, and Taiwan)
The Smart City Brake Support [Forward] (SCBS F) system alerts the driver of a possible
collision using an indication in the display and a warning sound when the Forward
Sensing Camera (FSC) detects a vehicle ahead and determines that a collision with a
vehicle ahead is unavoidable while the vehicle is being driven at a vehicle speed of about
4 to 80 km/h (2 to 50 mph). In addition, the system reduces damage in the event of a
collision by operating the brake control (SCBS brake) when the system determines that a
collision is unavoidable while the vehicle is being driven at a vehicle speed of about 4 to
30 km/h (2 to 18 mph). It may also be possible to avoid a collision if the relative speed
between your vehicle and the vehicle in front of you is less than about 20 km/h (12 mph).
• The system is only designed to reduce damage in the event of a collision. Over reliance
on the system leading to the accelerator pedal or brake pedal being mistakenly
operated could result in an accident.
• (Advanced Smart City Brake Support (Advanced SCBS)) Do not rely completely on the system:
WARNING
The Advanced Smart City Brake Support (Advanced SCBS) system operates
in response to a vehicle ahead or a pedestrian. The system does not operate
in response to obstructions such as a wall, 2-wheeled vehicles, or animals.
• (Smart City Brake Support [Forward] (SCBS F))
The Advanced Smart City Brake Support (Advanced SCBS) is a system
which operates in response to a vehicle ahead. The system may not be able
to detect or react to 2-wheeled vehicles or pedestrians.
25For details, refer to Section 4, “i-ACTIVSENSE”.


When Driving
26
NOTE
Advanced Smart City Brake Support (Advanced SCBS)Advanced Smart City Brake Support (Advanced SCBS)/
Smart City Brake
Support [Forward] (SCBS F)/ Smart City Brake Support [Reverse] (SCBS R)
• The Advanced Smart City Brake Support (Advanced SCBS) system is not
turned off. • The engine is running.
The vehicle speed is between about 4 to 80 km/h (2 to 50 mph).
Smart City Brake Support [Forward] (SCBS F)
The Smart City Brake Support [Forward] (SCBS F) system will operate under
the following conditions.
•
The engine is running.
• The Smart Brake Support/Smart City Brake Support (SBS/SCBS) system
warning light (amber) does not illuminate.
• “SCBS Not Available” is not displayed in the multi-information display. (with
multi-information display)
• (Rear-end collision warning)
Smart City Brake Support [Reverse] (SCBS R)
• The change lever (manual transaxle vehicle) or the selector lever (automatic
transaxle vehicle) is in the R (reverse) position.
• “Reverse Smart City Brake Support Malfunction” is not displayed in the multi-
information display.
• The vehicle speed is between about 2 to 8 km/h (2 to 4 mph).
• The Smart City Brake Support [Reverse] (SCBS R) is not turned off.
• The DSC is not malfunctioning. The Advanced Smart City Brake Support (Advanced SCBS) system will
operate under the following conditions.
• The Smart City Brake Support (SCBS) warning light (amber) does not
illuminate.
• (Object is vehicle ahead)
• (Object is a pedestrian)
The vehicle speed is between about 10 to 80 km/h (6.2 to 50 mph).
The vehicle speed is about 4 to 80 km/h (2 to 50 mph).
• (Brake control (SCBS brake))
The vehicle speed is about 4 to 30 km/h (2 to 18 mph).
• The Smart City Brake Support [Forward] (SCBS F) system is not turned off.
The Smart City Brake Support [Reverse] (SCBS R) system will operate under
the following conditions.
• The engine is running.
For details, refer to Section 4, “i-ACTIVSENSE”.


When Driving
Smart Brake Support (SBS)
The Smart Brake Support (SBS) system alerts the driver of a possible collision
using a display and warning sound if the radar sensor (front) and the Forward
Sensing Camera (FSC) determine that there is the possibility of a collision with a
vehicle ahead while the vehicle is being driven at about 15 km/h or faster (10
mph or faster). Furthermore, if the radar sensor (front) and the Forward Sensing
Camera (FSC) determines that a collision is unavoidable, the automatic brake
control is performed to reduce damage in the event of a collision.
Do not rely completely on the Smart Brake Support (SBS) system and always
drive carefully:
The Smart Brake Support (SBS) is designed to reduce damage in the event of a
collision, not avoid an accident. The ability to detect an obstruction is limited
depending on the obstruction, weather conditions, or traffic conditions. Therefore, if
the accelerator pedal or brake pedal is mistakenly operated it could result in an
accident. Always verify the safety of the surrounding area and depress the brake pedal
or accelerator pedal while keeping a safer distance from vehicles ahead or on-coming
vehicles.
WARNING
In addition, when the driver depresses the brake pedal, the brakes are applied
firmly and quickly to assist. (Brake Assist (SBS brake assist)).
27For details, refer to Section 4, “i-ACTIVSENSE”.


28
When Driving
Multi-information Display
Active Driving DisplayIf there is the possibility of a collision with a
vehicle or obstruction ahead, the beep sounds
continuously and a warning is indicated in the
display.
Collision Warning
The Smart Brake Support (SBS) system may not operate under the following
conditions:
• If the vehicle is accelerated rapidly and it comes close to a vehicle ahead.
Although the objects which activate the system are four-wheeled vehicles, the
radar sensor (front) could detect the following objects, determine them to be an
obstruction, and operate the Smart Brake Support (SBS) system.
• Objects on the road at the entrance to a curve (including guardrails and
snow banks).
• The vehicle is driven at the same speed as the vehicle ahead.
• The accelerator pedal is depressed.
• A vehicle appears in the opposite lane while cornering or rounding a curve.
• When crossing a narrow bridge.
• When entering an underground parking area.
• Metal objects, bumps, or protruding objects on the road. NOTE
Smart Brake Support (SBS)
• The brake pedal is depressed.
• The steering wheel is being operated.
• The selector lever is being operated.
• The direction indicator is being used.
• When the vehicle ahead is not equipped with tail lights or the tail lights are
turned off.
• When warnings and messages, such as a dirty windscreen, related to the
Forward Sensing Camera (FSC) are being displayed in the multi-
information display.
•
When passing under a low gate or through a tunnel or narrow gate.
• If you suddenly come close to a vehicle ahead.
• When driving in areas where there is high grass or forage.
• Two-wheeled vehicles such as motorbikes or bicycles.
• Pedestrians or non-metallic objects such as standing trees.
For details, refer to Section 4, “i-ACTIVSENSE”.


30
When Driving
i-ELOOP Charging Display
If the vehicle is driven while “i-ELOOP charging”
is displayed, a beep sound is heard. Make sure the
message is no longer displayed before driving.
The i-ELOOP power generating status is displayed in the centre display.
Indication on display
Control Status Display
Control status
Displays the level of electricity generated by
regenerative braking.
Displays the amount of the electricity stored
in the rechargeable battery.
Displays the status of the electricity stored
in the rechargeable battery and being
supplied to the electrical devices (whole
vehicle in display is illuminated
simultaneously).
For details, refer to Section 4, “i-ELOOP” or “Fuel Economy Monitor”.


32
Interior Features
For details, refer to Section 5, “Air-Conditioning System”.
Air-conditioning System (Fully Automatic Type)
Operation of Automatic Air-conditioning
1. Press the AUTO switch. Selection of the airflow mode, air intake selector and
amount of airflow will be automatically controlled.
2. Use the temperature control dial to select a desired temperature.
To turn off the system, press the OFF switch.
Press the DUAL switch or turn the front passenger temperature control dial to
control the set temperature individually for the driver and front passenger.
Airflow displayA/C mode display
Driver temperature control dial
AUTO switch
Mode selector switch
Fan control switch
OFF switch
Windscreen defroster switch
Rear window defogger switch
DUAL switch A/C switch
Mode selector
display Temperature setting display (driver’s s i d e)
Temperature setting display (Passenger’s side) Passenger temperature
control dial Air intake selector
(outside air position)
Air intake selector
(recirculated air position)