stop start MAZDA MODEL CX-3 2016 Quick Guide (in English)

Request switch
Before Driving
Operational Range
The advanced keyless system operates only when the driver is in the vehicle or
within operational range while the key is being carried.
All doors and the liftgate can be locked/unlocked by pressing the request switch on
the front doors while the key is being carried.
Locking, Unlocking with Request Switch
2 For details, refer to Section 3, “Advanced Keyless Entry and Start System”,
“Doors and Locks” or “Steering Wheel”.
Steering Wheel Adjustment
1. Stop the vehicle, and then pull down the lock
release lever under the steering column.
3. Attempt to push the steering wheel up and
down to make sure it's locked before driving. 2. Tilt the steering wheel and/or adjust the
steering column length to the desired positions,
then push the lever up to lock the column. The request switch on the liftgate can only be used to lock all doors and the liftgate.
Liftgate (Lock only)
Exterior aerial
Locking only
Operational range80 cm (31in) 80 cm (31in)
Request switchRequest switchRequest switch
Front doors
Lock release leverLock release lever
%:A((''%A'FKVKQPA3WKEM)WKFGKPFD

When Driving
5
Starting the Engine
For details, refer to Section 4, “Start/Stop Engine”.
1. Make sure the parking brake is on.
2. Continue to press the brake pedal firmly
until the engine has completely started.
3. (Manual transaxle)
Continue to press the clutch pedal firmly
until the engine has completely started.
(Automatic transaxle)
Put the vehicle in park (P). If you must
restart the engine while the vehicle is
moving, shift into neutral (N).
4. Press the push button start after both the KEY indicator
light (green) in the instrument cluster and the push button
start indicator light (green) illuminate.
(SKYACTIV-D 1.5)
• The starter does not rotate until the glow indicator light turns off.
• When starting the engine, do not release the clutch pedal (manual transaxle) or
the brake pedal (automatic transaxle) until the glow indicator light in the
instrument cluster turns off and the engine starts, after pressing the push button
start.
• If the clutch pedal (manual transaxle) or the brake pedal (automatic transaxle) is
released before the engine starts, depress the clutch pedal (manual transaxle) or
the brake pedal (automatic transaxle) again and press the push button start to
start the engine.
• If the ignition is left switched ON for a long period of time without the engine
running after the glow plugs are warmed up, the glow plugs may warm up again
which will illuminate the glow indicator light.
Indicator light
Push button start
%:A((''%A'FKVKQPA3WKEM)WKFGKPFD

6
When Driving
For details, refer to Section 4, “Start/Stop Engine”.
The i-stop function automatically stops the engine when the vehicle is stopped at a
traffic light or stuck in traffic, and then restarts the engine automatically to resume
driving. The system provides improved fuel economy, reduced exhaust gas
emissions, and eliminates idling noise while the engine is stopped.
Engine idle stopping and restarting
NOTE
• The i-stop indicator light (green) turns on under the following conditions:
• When engine idling is stopped.
• The i-stop indicator light (green) turns off when the engine is restarted.
Manual transaxle
2. While depressing the clutch pedal, shift the shift lever to the neutral position.
Engine idling stops after the clutch pedal is released.
3. (SKYACTIV-G 2.0) 1. Stop the vehicle by depressing the brake pedal and then the clutch pedal.
Operation of i-stop Function
Engine idling stop conditions are met while the vehicle is being driven. • (Except European model)
(SKYACTIV-D 1.5)
The engine restarts automatically when the clutch pedal is depressed.
NOTE
The engine restart timing varies depending on the brake pedal depression force.
The engine restarts automatically when you depress the clutch pedal or start to
release it.
%:A((''%A'FKVKQPA3WKEM)WKFGKPFD

7
When Driving
For details, refer to Section 4, “Start/Stop Engine”.
i-stop OFF Switch
By pressing the switch until a beep sounds,
the i-stop function is turned off and the i-stop
warning light (amber) in the instrument
cluster turns on. By pressing the switch again
until the beep sounds, the i-stop function
becomes operational and the i-stop warning
light (amber) turns off.
Automatic transaxle
2. The engine restarts automatically when the brake pedal is released with the
selector lever in the D or M position (not in second gear fixed mode).
3. If the selector lever is in the N or P position, the engine does not restart when
the brake pedal is released. The engine restarts when the brake pedal is
depressed again or the selector lever is shifted to the D, M (not in second gear
fixed mode) or the R position. (For the purposes of safety, always keep the
brake pedal depressed when shifting the selector lever while engine idling is
stopped.) 1. Engine idling stops when the brake pedal is depressed while the vehicle is
driven (except for driving in the R or M position second gear fixed mode) and
the vehicle is stopped.
Operation of i-stop Function
i-stop indicator light (green)/i-stop warning light (amber)
i-stop indicator light (green)
• When the engine idling is stopped.
Engine idling stop conditions are met while the vehicle
is being driven.
• The light turns on when the ignition is switched ON and
turns off when the engine is started. i-stop warning light (amber)
• The light turns on when the i-stop OFF switch is
pressed and the system is turned off. • (Except European model)
%:A((''%A'FKVKQPA3WKEM)WKFGKPFD

When Driving
8
Active Driving Display
Always adjust the display brightness and position with the vehicle stopped:
Adjusting the display brightness and position while driving the vehicle is dangerous
as doing so could distract your attention from the road ahead and lead to an
accident.
WARNING
For details, refer to Section 4, “Start/Stop Engine” or “Instrument Cluster and Display”.
i-stop Warning Beep
If the driver's door is opened while engine idling is stopped, the warning sound
operates to notify the driver that engine idling is stopped. It stops when the driver's
door is closed.
Active driving display
%:A((''%A'FKVKQPA3WKEM)WKFGKPFD

If Trouble Arises
26
If Trouble Arises
• Flat Tyre
If you have a flat tyre, drive slowly to a level spot that is well off the road and
out of the way of traffic to change the tyre.
In the event of a flat tyre, use the emergency flat tyre repair kit to repair the tyre
temporarily or use the temporary spare tyre.
• Overheating
1. Drive safely to the side of the road and park off the right-of-way.
2. Check whether coolant or steam is escaping from the engine compartment.
If steam is coming from the engine compartment:
Do not go near the front of the vehicle. Stop the engine.
Wait until the steam dissipates, then open the bonnet and start the engine.
If neither coolant nor steam is escaping:
Open the bonnet and idle the engine until it cools.
• Towing Description
We recommend that towing be done only by an expert repairer, we recommend
an Authorised Mazda Repairer or a commercial tow-truck service.
• Warning Lights and Warning Sounds
If a warning light illuminates or flashes or a warning sound is heard, check for
details concerning the warning light or sound in this guide. If the problem
cannot be resolved, contact an Authorised Mazda Repairer.
For details, refer to Section 7, “Flat Tyre”, “Overheating”, “Emergency Towing” or
“Warning/Indicator Lights and Warning Sounds”.
%:A((''%A'FKVKQPA3WKEM)WKFGKPFD