ESP MAZDA MODEL CX-3 2018 Smart Start Guide (in English)

4 MAZDAUSA.COM
ADVANCED KEYLESS ENTRY SYSTEM
This system allows you to lock and unlock t\Xhe doors without taking the key out.While Carrying the Advanced Key:•
Unlock the driver’s door by pushing
the driver’s door request switch once.
•
Unlock all doors by pushing the
driver’s door request switch once or twice (depending on personalization
setting, p. 10) OR by pushing the passenger’s door request switch once.
•
Lock all doors (and liftgate) by
pushing any request switch once.
•
To open the liftgate from outside
the vehicle: Open the p\.ower liftgate using the liftgate opener.
NOTE: Only vehicles equipped with th\.e
Advanced Keyless Entry \fystem allow you to lock and unlock \.the doors with the
door request switches (without taking the key out of your purse or pocket).
Vehicles equipped with th\.e Keyless Entry \fystem do not have request switches on the doors/liftgate. To lock and unlock \.the doors, the corresponding
transmitter button must be pushed.
Refer to your Owner’s Manual for additional details about
“Personalization Features”.
Door request switch
Lock
Unlock
Panic
alarm
Liftgate
request switch Liftgate

opener
CAUTION:
The key may not
be detected if
placed in the cup holder or too far
from the \fTART/
\fTOP ENGINE button. If the RED
KEY indicator light illuminates
in the instrument
cluster, the key is not being
detected. Move the key closer to
the \fTART/\fTOP
ENGINE button.
CAUTION:
Make sure the
engine is OFF and take the key with
you when leaving the vehicle.
When locking the doors using
the inside door
switches, be
careful not to leave the key
inside the vehicle
to prevent lock-out.
ADVAN\bED KEYLE\f\f ENTRY
(IF EQUIPPED)
2940109_18b CX-3 SSG_060817.indd 46/8/17 2:37 PM

28 MAZDAUSA.COM
BLIND SPOT MONITORING (BSM)
The BSM system is designed to assist the driver by monitoring blind spots on the left
and right sides of the vehicle in certain situations, such as lane chan\Xges.
•
The B\fM detects vehicles approaching from the rear while traveling in
the forward direction at a speed \.of 6.3 mph or more and notifies the
driver by turning on the B\fM w\.arning indicator light and displaying the vehicle detection screen (vehicles with Active Driving Display).
•
If the turn signal lever is operated to signal a turn in the direction
in which the B\fM warning indicator light is illuminated while the
approaching vehicle is detected, the B\fM warns the driver by turning on the B\fM warning indicator light, and by activating the warning sound and
the warning screen indicator display
(vehicles with Active Driving Display).
•
The detection area on this system
covers the driving lane\.s on both sides
of the vehicle and from the rear part
of the front doors to about 164 ft behind the vehicle.
• B\fM sensors are located under the
left and right rear bumper areas.
The B\fM system may not operate properly if the rear bumper is dirty,
so keep the rear bumper area clean
and free of bumper stickers.
NOTE:
•
The B\fM can assist the driver in confirming the safety
of the surroundings, but is not a complete substitute.
•
The driver is responsible for ensuring safe lane changes
and other maneuvers.
•
Always pay attention to the direction in which th\.e vehicle
is traveling and the vehicle’s surroundings.
Turning BSM System Off:
Turning the B\fM system off will turn off both the light and sound indicators. To turn the B\fM system off, push the B\fM OFF \.switch on the dash.
The B\fM OFF indicator in the instrument cluster will turn on to indicate the B\fM system is off.
NOTE: Turning the B\fM system off will also turn off the Rear \bross Traffic Alert system.
BLIND \fPOT MONITORING \fY\fTEM
WARNING:
B\fM is only a
supplementary
system to help
aid in monitoring
blind spots;
however, B\fM
has limitations.
The system may
not detect all
vehicles, especially
a motorcycle. Do
not rely solely on
the B\fM. Relying
solely on the
B\fM may cause
an unexpected
accident resulting
in death or serious
injury. Make sure
to look over your
shoulder before
changing lanes.
Your
vehicle
Detection areas
ACTIVE DRIVING DISPLA\XY
WHITE Vehicle
Detected
AMBER Vehicle
Detected
with Turn
\fignal On
BSM switch
2940109_18b CX-3 SSG_060817.indd 286/8/17 2:39 PM

m{zd{ c x-3 29
REAR \bRO\f\f TRAFFI\b ALERT
(IF EQUIPPED)
REAR CROSS TRAFFIC ALERT (RCTA)
The RCTA is designed to alert the driver of oncoming traffic when backing out of a parking spot. RCTA is active when the vehicle is in reverse and the vehicle speed is between 0 mph and 6 mp\Xh.
When the B\fM sensors detect a moving object, the R\bTA will notify the driver with indicators and sound:
• Rear view monitor and outside mirror flashing indications.
Refer to your Owner’s Manual for complete details.
WARNING:
R\bTA is only a
supplementary
system to help aid
when backing up; however, R\bTA
has limitations.
The system does not detect all
vehicles, especially motorcycles. Do
not rely solely on the R\bTA. Relying
solely on the R\bTA may cause
an unexpected
accident resulting in serious injury.
Always back up slowly.
BSM/RCTA (Left)BSM/RCTA (Right)
Rear view monitor
Object
detected
Object
detected
2940109_18b CX-3 SSG_060817.indd 296/8/17 2:39 PM

42 MAZDAUSA.COM
MANUAL SHIFT MODE
Manual Shift Mode g\Xives you the feel of driving a manual \Xtransmission by allowing you
to manually shift to control engine rpm and \Xtorque when more control is desired.
To Use Manual Shift Mode\X:
\fhift the lever from D to M.
To Shift Up To A Higher Gear:
Tap the shift lever back (+) once.
To Shift Down To A Lower Gear:
Tap the shift lever forward (-) once.
DRIVE SELECTION
SPORT mode will choose a lower gear for increased
acceleration response. It will also hold a lower gear/
delay upshifting when it d\Xetects you are braking or
cornering because it anticipates that you will want to
accelerate out of the turn more quickly.
Push the \fPORT button to switch to \fPORT mode
and the \fPORT mode indicator light in the instrument
cluster turns on. Push again\. to turn off.
NOTE: If the \fET button of the cruise control is pushed while\. in \fPORT mode, \fPORT
mode is switched off. \fPORT mode cannot be turned on or off when cornering.
• When the ignition i\.s switched OFF, \fPORT mode is also switched off.
•
Fuel consumption increases slightly when using \fPOR\.T mode.
TRAN\fMI\f\fION
SPORT
button
2940109_18b CX-3 SSG_060817.indd 426/8/17 2:40 PM