18 MAZDAUSA.COM
PLANNING A ROUTE USING VOICE COMMANDS
To plan a route to an address using your voice: 1 Push the TALK
button on the steering wheel.
2 When you hear the tone, say “Address”.
3
When on the address screen, say the full address (without zip code) for your
destination, for example “123 Main \ft., Los Angeles, \balifornia”. The system does not recognize zip codes.
4
\fay “Yes” if the address is correct. If shown a list of addresses, say the list number for
the correct address or say “None of these”.
NOTE:
• For best results, say the full address without pausing between words.
• Voice guidance can be skipped by pushing the TALK
button.
•
When prompt voice guidance is muted, you will need to go into Navigation \fettings to
turn the volume back on for the NAVI button to repeat the last instructions.
To remove or insert the MAP SD card (to update the map database): 1 Turn the ignition O\.FF.
2
Locate the \fD card slot located in the
center console.
Remove card:
Open the cover and push the card once, then
pull it out.
Insert card:
Push the card in (label-side u\.p), then
close the cover.
NOTE:
•
Visit www.mazdausa.com/navigation and download the most recent map available
for your device for free for three years from vehicle delivery.
•
For assistance with the navigation system, visit www.mazdausa.com/mazdaconnect or
call 800\f430\f0153.
•
Only use your MAP \fD card for operating and updating\. your navigation system.
DO NOT insert the MAP \fD card into another vehicle or into any other device such
as a camera.
• DO NOT put other \fD cards in this slot.
SD card slot
NAVIGATION \fY\fTEM
\bONTINUED
2940109_18b CX-3 SSG_060817.indd 186/8/17 2:38 PM