ignition MAZDA MODEL CX-30 2019 Owners Manual (in English)

Display*1*2Content Action to be taken
Depress Brake Pedal to
Start EngineThis message is indicated when the
push button start is pressed without
depressing the brake pedal.When starting the engine, press the
push button start with the brake ped-
al depressed.
Depress Clutch Pedal to
Start EngineThis message is indicated when the
push button start is pressed without
depressing the clutch pedal.When starting the engine, press the
push button start with the clutch
pedal depressed.
Press Push Button Start
Switch While Turning
Steering Wheel Left or
RightThis message is indicated while the
steering wheel is locked.Release the steering wheel lock by
pressing the start button while turn-
ing the steering wheel to the left and
right.
Check Gear Selector
Lever PositionThis message is indicated when the
selector lever is shifted to the P or R
position while driving.Check the selector lever position.
Close Door and Fasten
Seat BeltThis message is indicated when AU-
TOHOLD is about to operate and a
door is opened or a seat belt is unfas-
tened.When the AUTOHOLD is turned on,
close the doors and fasten seat belts.
Wiper Blades Must Be
on Windscreen Before
OperatingThis message is indicated when the
ignition is switched ON with the wip-
er arms at the service positions.Return the wiper arms to the initial
positions.
Windscreen Wiper
Range of Motion Re-
duced. Remove Ob-
struction(s)This message is indicated when there
is snow or dirt accumulation on the
windscreen and the wiper operation
range is narrowed.Remove foreign matter from the
windscreen.
Ignition Not Switched
OffThis message is indicated when the
driver’s door is opened without
switching the ignition OFF.Switch the ignition OFF before leaving
the vehicle.
Gear Selector Lever Not
in ParkDisplays when the push button start
is pressed while the selector lever is
in a position other than P, and the ig-
nition is switched to ACC.Shift the selector lever to the P posi-
tion and then switch the ignition OFF.
Excessive Transmission
Temperature. Drive
SlowlyThis message is indicated when the
internal temperature of the automatic
transmission is high.Drive slowly to reduce load on the
automatic transmission.
Excessive Transmission
Temperature. Stop Vehi-
cle in a safe LocationThis message is indicated when the
automatic transmission
fluid temper-
ature is abnormally high.Park the vehicle in a safe place imme-
diately and contact an expert repairer
(we recommend an Authorised Maz-
da Repairer).
If Trouble Arises
Warning/Indicator Lights and Warning Sounds
7-65

Warning Sound is
Activated
▼Lights-On Reminder
If the ignition is switched OFF with the
exterior lights turned on and the
driver’s door is opened, a sound is
activated.
Operate the headlight switch to turn
off the exterior lights.
NOTE
xWhen the ignition is switched to
ACC, the “Ignition Not Switched
Off
(STOP) Warning Beep” (page 7-67)
overrides the lights-on reminder.
xA personalised function is available
to change the sound volume for the
lights-on reminder.
Refer to the Settings section in the
Mazda Connect Owner's Manual.
▼Seat Belt Warning Beep
Front seat
If the vehicle speed exceeds about 20
km/h (12 mph) with the driver or front
passenger's seat belt unfastened, a
warning beep sounds continuously. If
the seat belt remains unfastened, the
beep sound stops once and then
continues for about 90 seconds. The
beep stops after the driver or front
passenger's seat belt is fastened.
NOTE
xPlacing heavy items on the front
passenger seat may cause the front
passenger seat belt warning function
to operate depending on the weight
of the item.
xTo allow the front passenger seat
weight sensor to function properly,
do not place and sit on an additional
seat cushion on the front passenger
seat. The sensor may not function
properly because the additional seat
cushion could cause sensor
interference.
xWhen a small child sits on the front
passenger seat, it is possible that the
warning beep will not operate.
Rear seat
The warning beep only sounds if a seat
belt is unfastened after being fastened.
▼Ignition Not Switched Off (STOP)
Warning Beep
European models
If the driver's door is opened with the
ignition switched to ACC, a beep will
be heard 6 times in the cabin to notify
the driver that the ignition has not
been switched OFF (STOP). Under this
condition, the keyless entry system will
not operate, the vehicle cannot be
locked, and the battery voltage will be
depleted.
Except European models
If the driver's door is opened with the
ignition switched to ACC, a beep will
be heard continuously in the cabin to
notify the driver that the ignition has
not been switched OFF (STOP). Under
this condition, the keyless entry system
will not operate, the vehicle cannot be
locked, and the battery voltage will be
depleted.
If Trouble Arises
Warning/Indicator Lights and Warning Sounds
7-67

▼Key Removed from Vehicle
Warning Beep
Vehicles with advanced keyless
function
If the key is taken out of the vehicle
while the ignition is switched to ACC
or ON, and all the doors are closed, a
sound is activated 6 times outside of
the vehicle and a sound is activated 1
time in the vehicle.
Vehicles without advanced keyless
function
If the key is taken out of the vehicle
while the ignition is switched to ACC
or ON, and all the doors are closed, a
sound is activated 1 time in the
vehicle.
NOTE
Make sure that you leave the vehicle
while carrying the key, or switch the
ignition OFF.
▼Touch Sensor Inoperable Warning
Beep (With the advanced keyless
function)
A warning beep is activated to notify
the driver that the doors are not locked
when all of the following conditions
are met:
xThe ignition is switched OFF.xAll the doors and liftgate are not fully
closed.
xThe lock is operated 3 times within 5
seconds.
Check the ignition and whether the
doors and liftgate are open or closed,
and then operate the lock again.
▼Liftgate Door-lock Switch
Inoperable Warning Beep
When the door-lock switch on the
liftgate is pressed under any of the
following conditions, a warning sound
is activated.
xA transmitter is not being carried.xThe ignition is switched to a position
other than OFF.
xAny door is open.xLiftgate is automatically operating.*
Make sure that none of the above
conditions are present, and then press
the door-lock switch again.
▼Key Left-in-luggage compartment
Warning Beep (With the advanced
keyless function)
If the key is left in the luggage
compartment with all the doors locked
and the liftgate closed, a beep will be
heard outside for about 10 seconds to
notify the driver that the key is in the
luggage compartment. In this case,
take out the key by pressing the electric
liftgate opener and opening the
liftgate. The key taken out of the
luggage compartment may not operate
because its functions have been
temporarily stopped. To restore the
key's functions, perform the applicable
procedure (page 3-8).
▼Key Left-in-vehicle Warning Beep
(With the advanced keyless
function)
If all the doors and luggage
compartment are locked using another
key while the key is left in the cabin,
the beep which sounds outside of the
vehicle will be heard for about 10
seconds to notify the driver that the
key is in the cabin. In this case, take
out the key by opening the door. A key
taken out of the vehicle using this
method may not operate because its
functions have been temporarily
stopped. To restore the key's functions,
If Trouble Arises
Warning/Indicator Lights and Warning Sounds
7-68*Some models.

perform the applicable procedure
(page 3-8).
▼Power Liftgate Warning Beep*
If system operation precautions are
necessary, the driver is notified by the
warning sound.
Warning beep What to check
The beep sounds 3
timesThe conditions re-
quired for the power
liftgate to operate have
not been met, such as
an object being stuck
in the liftgate.
The beep sound con-
tinuesThe vehicle is being
driven with the liftgate
open. Stop the vehicle
and close the liftgate.
▼Low Fuel Warning Beep
When the low fuel warning light
flashes, a warning beep is activated
once at the same time.
▼Electronic Steering Lock Warning
Beep
The warning beep operates if the
steering wheel is not unlocked after the
push button start is pressed. (page
4-4)
▼Brake System Warning Beep (With
M Hybrid)
A warning beep is activated if a
problem with the brake system occurs
and the brakes may not work as
intended. Decelerate the vehicle while
checking the safety of the surrounding
area, and park the vehicle in a safe
place. After stopping the vehicle,
contact an expert repairer (we
recommend an Authorised Mazda
Repairer).
▼Brake Override Warning Beep
A warning beep is activated when the
accelerator pedal and brake pedal are
depressed at the same time while
driving. Only depress the brake pedal.
▼Vehicle Problem Warning Beep
If any of the following problems occur,
a warning beep is activated. Check the
information regarding the warning
indication in the instrument cluster or
on the centre display.
xAutomatic transmission problemxIncrease in automatic transmission
internal temperature
xM Hybrid problemxBrake fluid amount decreasexEngine oil level sensor problemxElectric Parking Brake (EPB) problemxEngine hydraulic pressure decreasexEngine coolant temperature increasexEngine system problem
▼Shift Position Warning Beep
A sound is activated when the push
button start is pressed while the
selector lever is in a position other
than P, and the ignition is switched to
ACC. Check the selector lever
position.
▼Ignition Not Off Reminder
Warning Beep (With M Hybrid)
A warning beep is activated
continuously if the driver's door is
opened with the selector lever in a
position other than the P or N
position. Shift the selector lever to the
P or N position, or close the driver's
door.
▼i-stop Warning Beep*
xIf the driver's door is opened while
engine idling is stopped, the warning
sound operates to notify the driver
If Trouble Arises
Warning/Indicator Lights and Warning Sounds
*Some models.7-69

If the Active Driving
Display Does Not
Operate
▼If the Active Driving Display Does
Not Operate
If the active driving display does not
operate, switch the ignition off and
then restart the engine. If the active
driving display does not operate even
with the engine restarted, have the
vehicle inspected at an expert repairer
(we recommend an Authorised
Mazda Repairer).
If Trouble Arises
Active Driving Display Does Not Operate
7-74

xwith the ignition ONxwith the engine runningxduring a road test at various speeds.
Customer Information
Electromagnetic Compatibility
8-67

Index
Washer................................ 4-65
Headlight Washer...................... 4-65
Head Restraint.......................... 2-15
High Beam Control System
(HBC)....................................... 4-99
High Beam Control System (HBC)
indicator light (green)......... 4-100
Hill Launch Assist (HLA)............. 4-79
Horn........................................ 4-67
I
If a Warning Light Turns On or
Flashes......................................7-49
If the Active Driving Display Does Not
Operate.................................... 7-74
Ignition Not Off Reminder Warning
Beep.........................................7-69
Ignition Not Switched Off (STOP)
Warning Beep........................... 7-67
Ignition Switch............................ 4-4
Illuminated Entry System............ 5-34
Immobilizer System................... 3-47
Inspecting Brake/Clutch Fluid
Level.........................................6-30
Inspecting Coolant Level............ 6-28
Inspecting Engine Oil Level.........6-27
Inspecting Washer Fluid Level..... 6-31
Instrument Cluster..................... 4-21
Average fuel economy...........4-29
Current fuel economy........... 4-29
Deceleration regeneration charge
display................................. 4-30
Distance-to-empty................4-28
Engine coolant temperature
gauge...................................4-25
Fuel gauge........................... 4-26
Indication/indicator lights..... 4-34
Instrument panel
illumination..........................4-27
i-ACTIVSENSE display........... 4-30
Message Display................... 4-31
Message indicated on multi-
information display............... 7-63
Multi-information display...... 4-23
Odometer............................ 4-25
Outside temperature
display................................. 4-28
Speedometer....................... 4-21
Tachometer.......................... 4-21
Trip meter............................ 4-25
Vehicle speed alarm............. 4-30
Warning indication/warning
lights....................................4-32
Intelligent Speed Assistance
(ISA)....................................... 4-170
Activation/deactivation.......4-172
Intelligent Speed Assistance (ISA)
display............................... 4-172
Intelligent Speed Assistance (ISA)
set indication (green).......... 4-171
Intelligent Speed Assistance (ISA)
standby indication (white)... 4-171
Setting the system...............4-173
Temporarily cancelling the
system............................... 4-174
Interior Care............................. 6-59
Active driving display
maintenance........................ 6-61
Cleaning the window
interiors............................... 6-61
Instrument panel top (Soft pad)
maintenance........................ 6-61
Leather upholstery
maintenance........................ 6-60
Panel maintenance............... 6-61
Plastic part maintenance....... 6-61
Seat belt maintenance.......... 6-59
Upholstery maintenance....... 6-60
Vinyl upholstery
maintenance........................ 6-60
Interior Lights............................ 5-33
10-5

Index
T
Theft-Deterrent System.............. 3-49
Three-flash Turn Signal...............4-60
Tool Storage.............................. 7-24
Touch Sensor Inoperable Warning
Beep (With the advanced keyless
function)...................................7-68
To w i n g
Hook................................... 7-47
Towing Caravans and Trailers
(Europe/Russia/Turkey/Israel/
South Africa)........................ 3-60
Towing Description................... 7-46
Traction Control System (TCS).... 4-81
TCS OFF Indicator Light......... 4-82
TCS OFF switch.................... 4-82
TCS/DSC indicator light........4-81
Traffic Sign Recognition System
(TSR)...................................... 4-111
Transmitter.................................. 3-5
Tr o u b l e
Battery runs out.................... 7-39
Emergency starting................7-42
Flat tyre................................7-24
Overheating......................... 7-44
Parking in an emergency........7-23
When liftgate cannot be
opened................................ 7-73
Turn and Lane-Change Signals.... 4-60
Tyres......................................... 6-41
Flat tyre................................7-24
Replacing a tyre....................6-42
Replacing a wheel................ 6-43
Snow tyres........................... 3-57
Specifications....................... 9-10
Tyre chains........................... 3-57
Tyre inflation pressure........... 6-41
Tyre rotation......................... 6-42
Tyre Pressure Monitoring
System.................................... 4-232
U
Ultrasonic Sensor.................... 4-225
V
Vanity Mirrors........................... 5-32
Vehicle Information Labels
Chassis number...................... 9-2
Conformity plate.................... 9-3
Engine number....................... 9-3
Model plate........................... 9-2
Tyre pressure label.................. 9-3
Vehicle emission control
information label.................... 9-2
Ve h i c l e
identification
number..................................9-2
Vehicle Problem Warning Beep... 7-69
Vehicle Speed Alarm................. 7-70
W
Warning Sound is Activated
AUTOHOLD warning beep.... 7-70
Blind Spot Monitoring (BSM)
warning beep....................... 7-71
Brake override warning
beep.................................... 7-69
Brake system warning beep....7-69
Collision warning..................7-72
Door-ajar warning beep........ 7-72
Electric Parking Brake (EPB)
warning beep....................... 7-70
Electronic steering lock warning
beep.................................... 7-69
Excessive speed warning........7-72
Front Cross Traffic Alert (FCTA)
Warning Beep...................... 7-71
Ignition Not
Off Reminder
Warning Beep...................... 7-69
Ignition not switched off (STOP)
warning beep....................... 7-67
10-10

©2019 Mazda Motor Corporation. Printed in Europe
▼ Parking Sensor OFF Switch
When the switch is pressed, the parking sensor is
stopped and the indicator light turns on.
If the switch is pressed again, the parking sensor
becomes operational and the indicator light turns
off.
1. Indicator light
NOTE
When the ignition is switched OFF, the system status before it was turned of f is
maintained. For example, if the ignition is switched OFF while the parking sensor is
activated, the system will be activated when the ignition is switched ON the next time.
MAZDA 3/MAZDA CX-30 Owner’s Manual Leaflet
This leaflet contains revised information concerning the parking sensor. For operation
and handling of other equipment, read the MA ZDA 3/ MA ZDA CX-30 owner’s manual.
Please keep this leaflet with the owner’s manual.
The name, “parking sensor switch” in the owner’s manual will be revised to “parking
sensor OFF switch”.
Parking Sensor System*
* Some models.
Form No. 0000-LL-J593-GB