MAZDA MODEL CX-7 2010 Navigation Manual (in English)
Manufacturer: MAZDA, Model Year: 2010, Model line: MODEL CX-7, Model: MAZDA MODEL CX-7 2010Pages: 50, PDF Size: 3.73 MB
Page 11 of 50

11
Getting Started
Activation
The following operation procedure is for activating the navigation system.
Note
While on the Map screen, press the Enter (up/down) switch up or down to change the map
scale.
Activating the Navigation System
1
With the ignition switched to ACC or ON, press the Navi switch on the steering
switch.
2
After a moment, the CAUTION screen is displayed.
*1 :Press the Enter (up/down) switch up or down.
*2 :Press the Enter (up/down) switch.
lIf you are in agreement with the CAUTION
statement, press the Enter (up/down) switch up or
down to set the cursor to
*1.
Press the Enter (up/down) switch to switch to the
Map screen
*2.
l To change the language, set the cursor to
*1. Press the Enter (up/down)
switch to switch the screen to LANGUAGE
SELECTION
*2. ( page 12)
2 % : 8 : 9 ) F S S O 4 E K I * V M H E ] ( I G I Q F I V 4 1
Page 12 of 50

12
RoutingAddress
Book
Getting Started
The language can be changed using the Language setting displayed in the upper
part of the screen.
Before activating the navigation system
After activating the navigation system
1. Press the INFO switch to display the SETTINGS screen.
2. Select PREFERENCES and press the Enter (up/down) switch.
3. Select SELECT LANGUAGE and press the Enter (up/down) switch.
4. Select the desired language from the list.
nThe following feature settings are possible, refer to the “Multi Information
Display” in the owner’s manual.
lClock: Constant display of time.
lOutside Temperature Display: Constant display of ambient temperature.
lSettings: Used to change the multi information display settings. (Distance unit, Display
language)
The map information version can be upgraded. If you require the latest SD card of
Navigation Map data, consult an Expert Dealer, we recommend an Authorized
Mazda Dealer.
Setting the Language
Select the desired language from the list.
Press the Enter (up/down) switch to switch the screen to
CAUTION. ( page 11)
Setting the Clock, Outside Temperature Display and Other Settings
Upgrading the Map Information Version
1
With the ignition switched to ACC OFF, insert a finger into the depression
above the lid housing SD card of Navigation Map data (next to the navigation
display), and open it.
2 % : 8 : 9 ) F S S O 4 E K I * V M H E ] ( I G I Q F I V 4 1
Page 13 of 50

13
Getting Started
Notes
lAfter inserting the SD card of Navigation Map data, firmly close all of the lids.
lIf the inner lid is not firmly closed, the navigation system will not function.
2
Slide the notch of the inner lid sideways with your finger to open the inner lid.
3
The SD card of Navigation Map data will be visible. Press in the currently
inserted SD card of Navigation Map data with a finger. After pressing in the SD
card, it will eject partially. Grab the card with your fingers to pull it out.
4
Insert the new SD card of Navigation Map data all the way in and close all the
lids.
If the inner lid is closed while the SD card of Navigation Map data is not inserted
all the way, the card could be damaged.
Caution
2 % : 8 : 9 ) F S S O 4 E K I * V M H E ] ( I G I Q F I V 4 1
Page 14 of 50

14
RoutingAddress
Book
Getting Started
Menu
Menu is displayed by pressing the Enter (up/down) switch while the Map
screen is displayed.
Navigation Menu Screen
Set Destination ( page 22)
Find Local POI ( page 32)
Browse Map & Mark ( page 40)
Cancel/Edit Route ( page 34)
Navigation Setup ( page 15)
2 % : 8 : 9 ) F S S O 4 E K I ; I H R I W H E ] ( I G I Q F I V 4 1
Page 15 of 50

15
Getting Started
Navigation Set Up
lYou can alter the map display conditions, the route guidance conditions and show the
system information.
nStop your vehicle before performing the following operations. Do not change the settings and destination locations while driving. Minimize the time
spent viewing the monitor screen and listening to the voice guidance while driving.
Operating the system will distract the driver from looking ahead of the vehicle and may
cause an accident.
Always stop the vehicle in a safe location and set the parking brake before operating the
system.
Before Stepsselect
Warning
Open the
[Navigation
Setup]
nAuto ZoomThe Auto Zoom function automatically switches the map scale depending
on the distance between the next guidance point and the current position.
Used to switch the Auto Zoom function.
nMap ColorUsed to switch the map mode.
nMap DirectionUsed to switch the map direction.
nShow POI IconsUsed to display the selected POI icons on the Map screen.
nGuidance VolumeUsed to adjust the guidance volume.
Also adjustable using the audio volume knob during
transmission of the voice guidance.
Day: To switch to the daytime screen.
Night: To switch to the nighttime screen.
Auto: The screen switches between
daytime and nighttime displays in
conjunction with the on/off of the
vehicle’s exterior lights.
North Up: Geographic north is up.
Head Up: The direction you are heading is up.
2 % : 8 : 9 ) F S S O 4 E K I 1 S R H E ] . E R Y E V ] 4 1
Page 16 of 50
![MAZDA MODEL CX-7 2010 Navigation Manual (in English) 16
RoutingAddress
Book
Getting Started
Navigation Set Up
Open the
[Navigation
Setup]
nArrival TimeThe time which is displayed until reaching the destination or a
way point can be set as an estimate MAZDA MODEL CX-7 2010 Navigation Manual (in English) 16
RoutingAddress
Book
Getting Started
Navigation Set Up
Open the
[Navigation
Setup]
nArrival TimeThe time which is displayed until reaching the destination or a
way point can be set as an estimate](/img/28/13898/w960_13898-15.png)
16
RoutingAddress
Book
Getting Started
Navigation Set Up
Open the
[Navigation
Setup]
nArrival TimeThe time which is displayed until reaching the destination or a
way point can be set as an estimated arrival time or the
remaining time.
Select to display the estimated arrival time, or to
display the remaining time.
nAverage SpeedSet the average speed for each road to be driven.
(This function sets the standard speed (average vehicle speed
for each route) used for calculating the estimated arrival time
when calculating the route time.)
nEdit Memory PointUsed to edit the memory point or Home setting.( page 36, 38)
nDelete Previous PointUsed to delete the previously set destination.
nOperation GuideUsed to switch the operating guide display.
Operation Guide
2 % : 8 : 9 ) F S S O 4 E K I 1 S R H E ] . E R Y E V ] 4 1
Page 17 of 50
![MAZDA MODEL CX-7 2010 Navigation Manual (in English) 17
Getting Started
Navigation Set Up
Open the
[Navigation
Setup]
nAuto Complete TextWhen entering text, the system displays possible candidates of
words which may match the one you are trying to inp MAZDA MODEL CX-7 2010 Navigation Manual (in English) 17
Getting Started
Navigation Set Up
Open the
[Navigation
Setup]
nAuto Complete TextWhen entering text, the system displays possible candidates of
words which may match the one you are trying to inp](/img/28/13898/w960_13898-16.png)
17
Getting Started
Navigation Set Up
Open the
[Navigation
Setup]
nAuto Complete TextWhen entering text, the system displays possible candidates of
words which may match the one you are trying to input. If the
system narrows down the candidate to one, the word is
automatically displayed.
Used to switch the auto complete text.
nAdjust Current PositionUsed to adjust the vehicle position if it deviates from the Map
screen.
nRestore DefaultsRestores the default settings.
2 % : 8 : 9 ) F S S O 4 E K I 1 S R H E ] . E R Y E V ] 4 1
Page 18 of 50

18
RoutingAddress
Book
Getting Started
Screen Names and Functions
Screens Before Setting Route
(1) Map Orientation
( page 15)
(2) Clock(3) Temperature
Displays the ambient temperature.
(4) Vehicle marker
Shows the current position and
direction of your vehicle.(5) Scale display
Displays the scale of the map.
(6) Current Road Name
Shows the name of the road you are
currently driving on.
(7) Operation Guide
Displays the operational guidance.
( page 16)
Screens During Route Guidance
(1) The traveled distance to the
destination and the estimated arrival
time/remaining travel time
Displays the remaining time to the
destination.
Estimated arrival time to the destination
or the estimated remaining driving time
can be displayed by selecting either of
them. ( page 16)(2) Route display
Shows the provided route as a thick
blue line.
(3) Turn Arrow display
Shows the direction to turn at the next
junction and the distance to the junction.
(4) Next Guided Street Name display
(4)
(2)
(6)
(3)(5)
(1)(7)
(3)(1) (2)
(4)
2 % : 8 : 9 ) F S S O 4 E K I * V M H E ] ( I G I Q F I V 4 1
Page 19 of 50

19
Getting Started
The screen map can be scaled to 14 different sizes.
nBrightness/Contrast
Brightness and contrast of the navigation screen can be adjusted.
1. Press the INFO switch to display the SETTINGS screen.
2. Select PREFERENCES and press the Enter (up/down) switch.
3. Select SCREEN ADJUSTMENT and press the Enter (up/down) switch.
4. Select BRIGHTNESS/CONTRAST and press the Enter (up/down) switch.
5. Select BRIGHTNESS or CONTRAST using the left or right switch.
6. Adjust the tone by operating the Enter (up/down) switch upward/downward.
7. After setting, press the Enter (up/down) switch to finish the setting.
nDaytime/Night screen
When the headlights are on, daytime mode can also be selected (if a brighter screen is
needed at night). This selection can only be done when the headlights are on.
lThe screen can be returned to the daytime screen while the headlights or running lights are
on by pushing the dashboard illumination knob. You will hear a beep sound and the
illumination dimmer will be canceled. With each press of the dashboard illumination knob,
the dashboard illumination will change from dim to full bright and back to dim again.
Adjusting the Map Scale
1
Press the Enter (up/down) switch up or down while the Map screen is
displayed to zoom in/out of the Map screen.
Screen Adjustments
Scale bar
2 % : 8 : 9 ) F S S O 4 E K I * V M H E ] ( I G I Q F I V 4 1
Page 20 of 50

20
RoutingAddress
Book
Getting Started
Character Entry
Street
Name, City
Name, and
Other
Input
Select the first several
characters on the
screen. (Step 1)Select your target
in the list.
(Step 2)
1.Press the Enter (up/down)
switch up or down, select the
letter, and press the Enter (up/
down) switch.
Pressing the Enter (up/down)
switch with the cursor set to Del
erases one letter.
2.Set the cursor to Done and press
the Enter (up/down) switch. The
area names, Point names, city
names, or Street names which
include the letters currently
being input are displayed.l
If a desired name is not in the
list, go back to Step 1, and try
fewer characters.
: The input character can be
deleted.
: The list appears.
: You can change the type of text.
lExamples
Street: CANAL Street: 52ND
Enter by selecting characters: Enter by selecting characters:
The name list including the
input spelling is displayed.
Street: MAIN STREET
Enter by selecting characters:
CA 5 2
MA
2 % : 8 : 9 ) F S S O 4 E K I * V M H E ] ( I G I Q F I V 4 1