change time MAZDA MODEL MX-5 MIATA RF 2020 Workshop Manual
[x] Cancel search | Manufacturer: MAZDA, Model Year: 2020, Model line: MODEL MX-5 MIATA RF, Model: MAZDA MODEL MX-5 MIATA RF 2020Pages: 566, PDF Size: 62.47 MB
Page 476 of 566

Warning Sound isActivated
▼Lights-On Reminder
The lights-on reminder is operable when
the time setting
*1 of the auto headlight off
function is off.
If lights are on and the ignition is switched
to ACC or off, a continuous beep sound
will be heard when t he driver's door is
opened.
*1 If the light switch is left on, the auto headlight off function automatically
turns off the lights about 30 seconds
after switching the ignition off. The
time setting can be changed.
Refer to Personalization Features on
page 9-9.
NOTE
When the ignition is switched to ACC,
the “Ignition Not Switched Off (STOP)
Warning Beep” (page 7-49) overrides
the lights-on reminder.
A personalized function is available to
change the sound volume for the
lights-on reminder.
Refer to Personalization Features on
page 9-9.
▼Air Bag/Seat Belt Pretensioner
System Warning Beep
If there is a problem with the air bag/front
seat belt pretensioner systems and the
warning light illumination, a warning beep
sound will be heard for about 5 seconds
every minute.
The air bag and front seat belt pretensioner
system warning beep sound will continue
to be heard for approximately 35 minutes.
Have your vehicle inspected at an
Authorized Mazda Dealer as soon as
possible.
WA R N I N G
Do not drive the vehicle with the air bag/
front seat belt pretensioner system warning
beep sounding:
Driving the vehicle with the air bag/front
seat belt pretensioner system warning beep
sounding is dangerous. In a collision, the
air bags and the front seat belt
pretensioner system will not deploy and
this could result in death or serious injury.
Contact an Authorized Mazda Dealer to
have the vehicle inspected as soon as
possible.
▼ Seat Belt Warning Beep
Except Mexico
If the driver's seat belt is not fastened
when the ignition is switched ON, a beep
sound will be heard for about 6 seconds. If
the driver or the passenger's seat belt is not
fastened and the veh
icle is driven at a
speed faster than about 20 km/h (12 mph),
a beep sound will be heard again for a
specified period of time.
Until a seat belt is fastened or a given
period of time has elapsed, the beep sound
will not stop even if t he vehicle speed falls
below 20 km/h (12 mph).
If Trouble Arises
Warning/Indicator Lights and Warning Sounds
7-48
MX-5_8JA4-EA-19K_Edition1_old 2019-8-29 16:18:06
Page 479 of 566

NOTE
A personalized function is available to
change the Blind Spot Monitoring (BSM)
warning beep sound volume.
Refer to Personalization Features on page
9-9.
Reversing
The Blind Spot Monitoring (BSM)
warning sound is activated if there is a
possibility of collision with a vehicle
approaching from behind and from the
rear on the left and right sides of the
vehicle.
▼ Lane Departure Warning Sound*
While the system is operating, if the
system determines that the vehicle may
depart from the lane, it sounds a warning
sound.
NOTE
The volume of the LDWS warning sound
can be changed.
Refer to Personalization Features on
page 9-9.
The type of the LDWS warning sound
can be changed.
Refer to Personalization Features on
page 9-9.
▼
Excessive Speed Warning*
If the vehicle speed exceeds the speed
limit sign displayed on the
multi-information display, the warning
sound is activated and the area around the
speed limit sign displayed on the
multi-information disp
lay flashes 3 times
in amber, and if the vehicle speed
continues to exceed the displayed speed
limit sign, the indication stops flashing
and remains on.
▼ Collision warning*
If there is a possibility
of a collision with a
vehicle ahead or an obs truction at the rear
of the vehicle, the warning light in the
instrument cluster flashes at the same time
as the warning indication is displayed in
the multi-information display, and a
warning sound is activated intermittently.
If Trouble Arises
Warning/Indicator Lights and Warning Sounds
*Some models.7-51
MX-5_8JA4-EA-19K_Edition1_old 2019-8-29 16:18:06
Page 554 of 566

ItemFeatureFactory Set‐
ting Available Settings Settings
Change
Method
Traffic Sign Recognition
System (TSR)*3 (page
4-92) The Traffic Sign Recognition
System (TSR) can be set to in‐
operable.
*1On
On/Off A ―
The warning pattern of the ex‐
cessive speed warning can be
changed. OffOff/
Vi s ua l /
Audio & Visual A―
The activation timing for the
excessive speed warning can be
changed.00/5/10
A―
Ve h i c l e
Door locks (page 3-19). Operation condition of auto
lock/unlock function Lock: When
Driving Un‐
lock: IGN Off Lock: When Driving
Unlock: In Park/
Lock: Out of Park
Unlock: In Park/
Lock: Shifting Out of Park/
Lock: When Driving Unlock: IGN Off/
Lock: When Driving/
Off AC
Keyless entry system (page
3-4).
Method for unlocking door us‐
ing transmitter
Driver's: Once,
All Doors: Tw i c e All Doors: Once/
Driver's: Once, All Doors: Twice AD
Time for locking door automat‐
ically
60 seconds90 seconds/
60 seconds/
30 seconds A―
Advanced keyless entry
system (page 3-11). Method for unlocking door us‐
ing request switch/transmitter
Driver's: Once,
All Doors: Tw i c e All Doors: Once/
Driver's: Once, All Doors: Twice A
D,
E
Time for locking door automat‐
ically 60 seconds90 seconds/
60 seconds/
30 seconds A―
Walk-away auto lock function
operation/non-operational
Off On/Off A ―
Beep volume when locking/
unlocking
MediumHigh/
Medium/ Low/
Off A
D,
E
Specifications
Personalization Features
9-10
MX-5_8JA4-EA-19K_Edition1_old 2019-8-29 16:18:06
Page 555 of 566

ItemFeatureFactory Set‐
ting Available Settings Settings
Change
Method
Illuminated entry system
(page 5-93). Time until interior lights turn
off after closing door
15 seconds60 seconds/
30 seconds/
15 seconds/
7.5 seconds A―
Time until interior lights turn
off automatically when any
door is not closed completely
30 minutes60 minutes/
30 minutes/
10 minutes A―
Auto-wiper control (page
4-51).
Operational/non-operational On
On/Off*4A―
Daytime running lights
(page 4-50).Operational/non-operational On On/Off ― ―
Auto headlight off*5 (page
4-45). Time until headlights turn off 30 seconds 120 seconds/
90 seconds/
60 seconds/
30 seconds/
Off
*6
A―
Auto-light control (page
4-45). Timing by which lig
hts turn on Medium High/
Med. High/ Medium/
Med. Low/ Low A―
High Beam Control System
(HBC) (page 4-78).
Operational/non-operational*1On
On/Off A ―
Adaptive Front Lighting
System (AFS) (page 4-77). Operational/non-operational*1On
On/Off A ―
Lights-on reminder*7 (page
7-48). Warning beep volume High High/Low/Off A ―
Coming home light (page
4-48).
Time until headlights turn off 30 seconds 120 seconds/
90 seconds/
60 seconds/
30 seconds/ Off A―
Leaving home light (page
4-49).
Operational/non-operational On On/Off A ―
Turn indicator (page 4-50). Beep volume
LowHigh/Low A ―
Three-flash turn signal
(page 4-51). Operational/non-operational On On/Off A ―
Specifications
Personalization Features
9-11
MX-5_8JA4-EA-19K_Edition1_old
2019-8-29 16:18:06
Page 556 of 566

ItemFeatureFactory Set‐
ting Available Settings Settings
Change
Method
System
Language Language indicated in display English Depends on market
*8A―
TemperatureTemperature unit indicated in
display °F °F/°C A F
DistanceDistance unit indicated in dis‐
play mi/km mi/km A ―
Fuel Economy Monitor
(page 4-69).
Ending display On/off Off On/Off B ―
Fuel economy resetting
procedure*
Linkage/non-linkage with fuel
economy reset and trip meter A
reset Off On/Off B ―
*1 Though these systems can be tur
ned Off, doing so will defeat the purpose of the system and Mazda
recommends that these systems remain On.
*2 Only the volume of the warning beep during Blind Spot Monitori ng (BSM) operation can be changed. The
volume of the warning beep durin g Rear Cross Traffic Alert (RCTA) operation cannot be changed.
*3 This system functions only when t he navigation system is functioning.*4 If the auto-wiper control is set to Off, the wiper lever position is set to in termittent operation.*5 If the setting is changed to O ff, the following operation is performed according to the headlight switch
position:
At position: Headlights turn off immediately after the ignition i s switched off.At any position other than : Headlights on/off conditions vary according to the headlight switch
position. Refer to Headlights on page
4-45
*6 When set to Off, the lights-on reminder is operable.*7 The setting of the lights-on re minder can be changed with the time setting of auto head light off function set to
Off.
Refer to Lights-On Rem inder on page 7-48.
*8 Available only in display from the center display.
Specifications
Personalization Features
9-12*Some models.
MX-5_8JA4-EA-19K_Edition1_old 2019-8-29 16:18:06