turn signal bulb MAZDA MODEL PROTÉGÉ 2003 Owners Manual (in English)

5-37
Driving Your Mazda
Switches and Controls
Form No. 8Q94-EA-02G

Tu r n S i g n a l
Move the signal lever down (for a left
turn) or up (for a right turn) to the stop
position. The signal will self-cancel after
the turn is completed.
If the indicator light continues to flash
after a turn, manually return the lever to
its original position.
Green indicators on the dashboard show
which signal is working.
Lane-change signals
Move the lever slightly toward the
direction of the change —until the
indicator flashes— and hold it there. It
will return to the off position when
released.Use this switch to turn on the fog lights.
They help you to see as well as to be seen.
To turn on the fog lights, first turn on the
headlight switch. Then press the fog light
switch.
To turn the fog lights off, press the fog
light switch again or turn the headlight
switch off.
Turn and Lane-Change
Signals
NOTE
If an indicator light stays on without
flashing or if it flashes abnormally, the
turn signal bulb may be burned out.
Right turn
Left turn Right lane
change
Left lane
changeOFF
Fog Lights
J39L_EA.book Page 37 Saturday, June 8, 2002 5:35 PM

8-29
Maintenance and Care
Owner Maintenance
Form No. 8Q94-EA-02G
Light Bulbs
License plate lights Front side-marker lights
Overhead lights/Map lights Sedan
Headlights
Front turn signal lights/
Parking lights
Brake lights/Taillights
Rear turn signal lights
Reverse lights
Taillights
High-mount brake light
Trunk light
Rear side-marker lights
Side turn signal lights
J39L_EA.book Page 29 Saturday, June 8, 2002 5:35 PM

8-34
Maintenance and Care
Owner Maintenance
Form No. 8Q94-EA-02G

Replacing a Bulb (Front)
To replace the fog light bulbs, contact an Authorized Mazda Dealer.
To replace the front side-marker light bulbs (Hatchback), contact an Authorized Mazda
Dealer.
Front turn signal lights/Parking lightsFront side-marker lights
Sedan
Side turn signal lights
J39L_EA.book Page 34 Saturday, June 8, 2002 5:35 PM

8-36
Maintenance and Care
Owner Maintenance
Form No. 8Q94-EA-02G

Replacing a Bulb (Rear)
Rear bulb access
(Sedan)
To replace the turn signal light, brake
light/taillight, side-marker light or reverse
light bulb, the trunk end trim must be
removed and the inside cover must be
partially opened.
1. Pull the center section of the plastic
retainer and remove the retainers and
the trunk end trim.
2. Remove the inside cover’s plastic
retainers and partially open the inside
cover.(Hatchback)
To replace the turn signal light, brake
light/taillight or reverse light bulb, remove
the caps and the cover.
Jack cover
J39L_EA.book Page 36 Saturday, June 8, 2002 5:35 PM

8-37
Maintenance and Care
Owner Maintenance
Form No. 8Q94-EA-02G
Brake lights/Taillights
Rear side-marker lights
Reverse lights
Taillights
Rear turn signal lights
High-mount brake light (Sedan) License plate lights
Trunk light (Sedan)
Sedan
Sedan
Hatchback
Hatchback Brake lights/Taillights
Rear turn signal lights
Reverse lights
Sedan
To replace the high-
mount brake light bulb,
contact an Authorized
Mazda Dealer.
J39L_EA.book Page 37 Saturday, June 8, 2002 5:35 PM

10-7
Specifications
Form No. 8Q94-EA-02G

Light Bulbs
Light bulb Wattage
HeadlightsSedan 60/55
HatchbackHi 60
Lo 55
Front turn signal/Parking lights 27/8
Side turn signal lights 5
Fog lights55
Rear turn signal lights 21
Front side-marker lights 5
Rear side-marker lights (Sedan) 3.8
Taillights (Sedan) 3.8
Brake lights/Taillights 21/5
High-mount brake lightSedanType A 21
Type B 5.8
Hatchback 5.8
Reverse lights21
License plate lights 5
Trunk light (Sedan) 5
Luggage compartment light (Hatchback) 5
Overhead lightTy p e A 1 0
Ty p e B 8
Map lights5
J39L_EA.book Page 7 Saturday, June 8, 2002 5:35 PM