ECU MAZDA MODEL RX 8 2005 (in English) Service Manual
[x] Cancel search | Manufacturer: MAZDA, Model Year: 2005, Model line: MODEL RX 8, Model: MAZDA MODEL RX 8 2005Pages: 364
Page 249 of 364

Black plate (249,1)
Check the oil level and fill to the F mark
if necessary.
Oil capacity (General reference only,
refer to Specifications section for
capacities.)
NOTE
lThe indicated engine oil capacities
are for general reference purposes
only. When adding or changing oil,
verify the engine oil level with the
oil dipstick.
lUse only specified engine oil (page
10-4).
lVerify that the engine cover is
securely installed.
Changing oil filter
Because you need a special tool to
retighten the filter, an Authorized Mazda
Dealer should do the work.
Engine Coolant
qInspecting Coolant Level
WARNING
Hot Engine:
A hot engine is dangerous. If the
engine has been running, parts of the
engine compartment can become very
hot. You could be burned. Carefully
inspect the engine coolant in the
coolant reservoir, but do not open it.
Do not use a match or live flame in the
engine compartment. DO NOT ADD
COOLANT WHEN THE ENGINE IS
HOT.
Electrical Fan and Engine
Inspection:
Working near the electrical cooling
fan when it is running is dangerous.
You could be hit by the fan and
seriously injured. Turn off the ignition
switch and make sure the fan is not
running before attempting to work
near the electrical cooling fan.
Cooling System Cap:
When the engine and radiator are hot,
scalding coolant and steam may shoot
out under pressure and cause serious
injury. Don't remove the cooling
system cap when the engine and
radiator are hot.
Maintenance and Care
Owner Maintenance
8-15
RX-8_8T69-EA-04G_Edition1 Page249
Wednesday, June 9 2004 2:13 PM
Form No.8T69-EA-04G
Page 254 of 364

Black plate (254,1)
WARNING
Sudden Vehicle Movement:
Shifting the shift lever without first
depressing the brake pedal is
dangerous. The vehicle could move
suddenly and cause an accident.
Make sure the brake pedal is applied
before shifting the shift lever.
4. Remove the engine cover.
5. With the engine still idling, pull out the
dipstick, wipe it clean, and put it back.
6. Pull it out again.
The proper fluid level is marked on the
dipstick as follows.
Full
A
Low
Full
B
Low
Fluid hot scale A
When the vehicle has been driven and the
fluid is at normal operating temperature,
about 65°C (150°F), the level must be
between Full and Low.
Fluid cold scale B
When the engine has not been running
and the outside temperature is about 20°C
(70°F), the level must be between Full
and Low.
CAUTION
lUse the cold scale only as a
reference.
lIf outside temperature is lower than
about 20°C (70°F), start the engine
and inspect the fluid level after the
engine reaches operating
temperature.
lIf the vehicle has been driven for an
extended period at high speeds or in
city traffic in hot weather, inspect the
level only after stopping the engine
and allowing the fluid to cool for 30
minutes.
Fully insert the dipstick. When adding
fluid, inspect with the dipstick to make
sure it doesn't pass full.
NOTE
lInspect the fluid on both sides of the
dipstick in a well lit area for an
accurate reading.
lVerify that the engine cover is
securely installed.
8-20
Maintenance and Care
Owner Maintenance
RX-8_8T69-EA-04G_Edition1 Page254
Wednesday, June 9 2004 2:13 PM
Form No.8T69-EA-04G
Page 257 of 364

Black plate (257,1)
3. Unfasten the clamps.
4. Lift off the air filter cover and remove
the filter.
Air filter cover
Air filter
5. Wipe inside the air cleaner housing
with a damp cloth.
6. Clean or replace the filter.
7. Install in the reverse order of removal.
Replace the filter according to Scheduled
Maintenance (page 8-3).
NOTE
After installing the air filter cover, make
sure the electrical connector is securely
connected.
Wiper Blades
CAUTION
lHot waxes applied by automatic car
washers have been known to affect
the wiper's ability to clean windows.
lTo prevent damage to the wiper
blades, don't use gasoline, kerosene,
paint thinner, or other solvents on or
near them.
Contamination of either the windshield or
the blades with foreign matter can reduce
wiper effectiveness. Common sources are
insects, tree sap, and hot wax treatments
used by some commercial car washes.
If the blades are not wiping properly,
clean the window and blades with a good
cleaner or mild detergent; then rinse
thoroughly with clean water. Repeat if
necessary.
qReplacing Windshield Wiper
Blades
When the wipers no longer clean well, the
blades are probably worn or cracked.
Replace them.
CAUTION
To prevent damage to the wiper arms
and other components, don't move the
wipers by hand.
Maintenance and Care
Owner Maintenance
8-23
RX-8_8T69-EA-04G_Edition1 Page257
Wednesday, June 9 2004 2:13 PM
Form No.8T69-EA-04G
Page 261 of 364

Black plate (261,1)
WARNING
Keep Flames Away:
Flames and sparks near open battery cells are dangerous. Hydrogen gas, produced
during normal battery operation, could ignite and cause the battery to explode. An
exploding battery can cause serious burns and injuries. Keep all flames including
cigarettes and sparks away from open battery cells. When working near a battery, do
not allow metal tools to contact the positive (
) or negative () terminal of the
battery. Do not allow the positive (
) terminal to contact the vehicle body.
Battery-Related Explosion:
Flames and sparks near open battery cells are dangerous. Hydrogen gas, produced
during normal battery operation, could ignite and cause the battery to explode. An
exploding battery can cause serious burns and injuries. Keep all flames, including
cigarettes, and sparks away from open battery cells.
NOTE
lRemove the engine and battery
covers before performing battery
maintenance.
Engine cover
Battery cover
lVerify that the engine cover is
securely installed.
qBattery Maintenance
To get the best service from a battery:
lKeep it securely mounted.
lKeep the top clean and dry.
lKeep terminals and connections clean,
tight, and coated with petroleum jelly
or terminal grease.
Maintenance and Care
Owner Maintenance
8-27
RX-8_8T69-EA-04G_Edition1 Page261
Wednesday, June 9 2004 2:13 PM
Form No.8T69-EA-04G
Page 275 of 364

Black plate (275,1)
Replacing the fuses under the hood
If the headlights or other electrical
components don't work and the fuses in
the cabin are OK, inspect the fuse block
under the hood. If a fuse is blown, it must
be replaced. Follow these steps:
1. Turn off the ignition switch and all
other switches.
2. Remove the fuse block cover.
Next to air filter
Engine cover
Near battery
Batter
y cover
NOTE
Remove the engine and battery covers
before removing the fuse block cover
near the battery.3. If a fuse is blown, replace it with a new
oneof the same amperage rating.
Normal
Blown
NOTE
lTo replace the MAIN fuse, contact
an Authorized Mazda Dealer (page
8-42).
lVerify that the engine cover is
securely installed.
Maintenance and Care
Owner Maintenance
8-41
RX-8_8T69-EA-04G_Edition1 Page275
Wednesday, June 9 2004 2:13 PM
Form No.8T69-EA-04G
Page 318 of 364

Black plate (318,1)
H
Hazard Warning Flasher .................... 5-56
Hazardous Driving .............................. 4-8
Headlight Washer .............................. 5-54
Headlights
Control ....................................... 5-49
Flashing ...................................... 5-50
High-low beam .......................... 5-49
Leveling ..................................... 5-50
On reminder ............................... 5-49
HomeLink Wireless Control
System .............................................. 5-56
Hood Release .................................... 3-21
Horn .................................................. 5-55
I
Ignition
Keys ............................................. 3-2
Switch .......................................... 5-2
Illuminated Entry System ................. 6-39
Immobilizer System .......................... 3-24
Indicator Lights ................................. 5-36
Cruise main ................................ 5-46
Cruise set .................................... 5-46
DSC OFF .................................... 5-45
Headlight auto-leveling
malfunction ................................ 5-47
Headlight high-beam .................. 5-44
power steering malfunction ........ 5-46
Security ...................................... 5-44
Shift position .............................. 5-45
TCS/DSC ................................... 5-45
Turn-signal/hazard warning ....... 5-47
I
Information Display .......................... 6-42
Ambient temperature display ..... 6-43
Audio display ............................. 6-44
Climate control display .............. 6-44
Clock .......................................... 6-43
Information display functions .... 6-42
Instrument Cluster ............................. 5-30
Interior Care ...................................... 8-50
Interior Lights ................................... 6-39
J
Jump-Starting .................................... 7-21
K
Keyless Entry System ......................... 3-3
Keys .................................................... 3-2
L
Label Information ............................. 10-2
Lane-Change Signals ........................ 5-51
Light Bulbs
Replacement ............................... 8-33
Specifications ............................. 10-6
Lighter ............................................... 6-44
Lighting Control ............................... 5-49
Lubricant Quality .............................. 10-4
M
Maintenance
Introduction .................................. 8-2
Owner maintenance precautions ... 8-9
Owner maintenance schedule ....... 8-8
Scheduled ..................................... 8-3
11-4
Index
RX-8_8T69-EA-04G_Edition1 Page318
Wednesday, June 9 2004 2:13 PM
Form No.8T69-EA-04G
Page 319 of 364

Black plate (319,1)
M
Manual Transmission Operation ......... 5-8
Recommendations for shifting ..... 5-9
Map Lights ........................................ 6-40
Meters and Gauges ........................... 5-30
Mirrors
Outside mirrors .......................... 3-29
Rearview mirror ......................... 3-30
Money-Saving Suggestions ................ 4-7
Moonroof .......................................... 3-22
O
Odometer and Trip Meter .................. 5-31
Outside Mirrors ................................. 3-29
Overhead Console ............................. 6-47
Overhead Lights ................................ 6-40
Overheating ....................................... 7-18
Overloading ...................................... 4-11
P
Paint Damage .................................... 8-45
Parking Brake ..................................... 5-5
Parking in an Emergency .................... 7-2
Power Door Locks .............................. 3-9
Power Steering .................................. 5-16
Power steering malfunction indicator
light ............................................ 5-16
Power Windows ................................ 3-16
Push-Starting ..................................... 7-24
R
Rear Quarter Windows ..................... 3-18
Rear Seat ............................................. 2-8
Rear Window Defroster .................... 5-54
Rearview Mirror ................................ 3-30
Recreational Towing ......................... 7-27
R
Registering Your Vehicle in A Foreign
Country ............................................. 9-12
Rocking the Vehicle ............................ 4-8
S
Safety Defects, Reporting ................. 9-18
Seat Belt System
3-point type ................................ 2-14
Automatic locking ...................... 2-12
Emergency locking .................... 2-12
Extender ..................................... 2-17
Location of seat belt ................... 2-13
Pregnant women ........................ 2-12
Pretensioner and load limiting .... 2-15
Seat belt precautions .................. 2-10
Warning beep ............................. 2-19
Warning light ............................. 2-18
Seats
Front seat
(Electrically operated seats) ......... 2-5
Front seat
(Manually operated seats) ............ 2-2
Rear seat ....................................... 2-8
Security System
Immobilizer system .................... 3-24
Theft-deterrent system ............... 3-27
Service Publications .......................... 9-19
Spare Tire and Tool Storage ................ 7-3
Specifications .................................... 10-4
Speed Unit Selector ........................... 5-31
Speedometer ...................................... 5-31
SRS Air Bags
Air bag system description ......... 2-34
Supplemental restraint systems
precautions ................................. 2-29
Warning light ............................. 2-38
Starting the Engine .............................. 5-3
Index
11-5
RX-8_8T69-EA-04G_Edition1 Page319
Wednesday, June 9 2004 2:13 PM
Form No.8T69-EA-04G
Page 333 of 364

Before Use
11
ENTER key
Executes a selected item.ENTER
RET key
Returns to the previous screen.
POS (Position) key
Displays your current position.
( page 18)
POS
Joystick
Selects items
by tilting it up, down, right, and left.ENTER
RET
ZOOM key
Changes the map scale.
( page 19)
( page 14)
ZOOM
Displays pop up menu.
Scrolls map.
ance rs.
ality.