instrument panel MAZDA MODEL TRIBUTE 2002 Quick Tips (in English)

DRIVER’S VIEW
Always check the Owner’s Manual for more operating information and safety features
1. Power window switches,
see Switches/Locks
2. Power door locks,
see Switches/Locks
3. Fog lamp switch*
Press on/off; on with low
beams only
4. Air vents
5. Turn signals/lighting
control lever,
see Driver Controls
6. Horn/Air bag
7. Wiper/washer control
lever,
see Driver Controls8. Gearshift lever (A/T),
see Transmission
9. Rear window defogger
(style may vary)
Press on/off; shuts off with
ignition or after 10 minutes
10. Hazard warning
switch
Push on/off
11. Audio system,
see Audio Systems
12. 4x4 control*,
see Transmission
13. Climate control panel,
see Climate Controls
14. Auxiliary power point15. Parking brake lever
16. Cruise control*,
see Overhead Console
17. Tilt steering-wheel lever
Push release lever down, tilt
wheel up or down, pull lever
up to lock
18. Hood release handle
Pull to open partially
19. Instrument panel
lighting
To brighten/dim: Rotate
thumb-wheel up/down
20. Dual power mirrors,
see Switches/Locks
21. Fuse panel
Driver’s
View
Quick Tips Mazda 2002 Tribute page 2
page 3
Revised January 14, 2002
Key
Operates ignition
and all locks
SecuriLock™ passive
anti-theft key
Coded transistor in key
activates ignition
Remote keyless entry
system*, see Locks
Tips: Use key number
plate to purchase a new
key; store in safe place
You can lock the lift-
gate by using the key,
pushing the lock but-
ton down or using the
power door lock
switch* on the left
side of the cargo area
21
15
13
12
56743
16
181920
14
8
1617
9941141012
*Denotes optional equipment

DRIVER CONTROLS
Always check the Owner’s Manual for more operating information and safety features
Turn signal/lighting
control lever
OFF= Lights off
= Tail, side marker, instrument,
license plate and parking
lights on: Rotate knob (1)
to first notch
= Tail, parking, instrument,
license plate and head-
lights on: Rotate knob
(1) to second notchHigh beams on/off: Push lever
forward to detent/pull back
to detent
To flash high beams: Pull lever
back slightly and release
Turn signals right/left: Move lever
up/down
Wiper/washer control lever
Ignition switch must be in ACC or
ON position
To activate interval wipers: Push
lever down to first detent and
rotate knob (1) to desired speed
To activate wiper normal or
low speed: Push down to
second detent
To activate high speed: Push
lever down to third detentTo activate washer: Pull
lever toward you
To activate mist: Push lever
up and release
To activate rear interval wiper:
Rotate knob (2) up to INT
To activate rear normal speed
wipe: Rotate knob (2) up to ON
To activate rear wash: Rotate
knob (2) to and release
To set speed: Press and release
SET ACC (3) at desired speed;
hold (3) to accelerate
To decelerate: Press and hold
CST (4), release at desired speed;
or tap brake pedal, press and
release (3) at desired speed
Incremental deceleration: Press and
release (4), each tap = minus 1 mphIncremental acceleration: Press and
release (3), each tap = plus 1 mph
To cancel: Tap brake/clutch*
pedal or press OFF button (5)
Return to preset speed (after
braking): Press and release RSM
button (2)
Overhead console*
1. Map/reading light switches
To turn on/off: Press
2. Map/reading light
3. Moonroof switch*
To open: Press and hold
rear of switch
To close: Press and hold
front of switch
To tilt (panel closed):
Press and hold front/rear
of switch to open/close4. Storage compartment*
To open: Press button, then
pull to full open position
5. Garage door opener
button/compartment*
See Owner’s Manual for
installation Cruise control*
Operates above 30 mph
Press and release ON (1)
Driver
Controls
Overhead
Console
Quick Tips Mazda 2002 Tribute page 6
page 7
Revised January 14, 2002
ON
OFF SET
ACC
CSTRSM1
5
2
3
4
1
21
12
321
4
4
5
*Denotes optional equipment

CLIMATE CONTROLS
Always check the Owner’s Manual for more operating information and safety features
1. Fan control
To increase speed and flow:
Rotate knob clockwise
2. Air flow selections
= air to dash
= air to dash and floor
OFF = system off, no air flow
= air to floor
= air to floor and
windshield
= defrost, air to
windshield
3. Temperature selection
Cooler/warmer = rotate knob
counterclockwise/clockwiseAir conditioning system
MAX A/C= cooling with inside
air, air to dash only
A/C= cooling with outside air,
air to dash only
Control positions for
maximum defrost
Fan to maximum, temperature
to maximum hot, air flow selector
knob to
Tips: To prevent moisture
buildup, never drive
with system off
To help prevent windshield
fogging in humid weather,
select DEF before starting
engine
Automatic transmission*
Gearshift must be in Park or
Neutral to start engine; it must
be in Park to remove ignition key
P = Park
To move gearshift from Park:
You must press firmly on the
brake pedal and the ignition
must be in the ON position
R = Reverse
Never engage Reverse when
vehicle is moving
N = Neutral
No gear is engaged; vehicle can
roll freely, even on a slight incline,
unless the brakes are appliedD (Overdrive)
For normal driving: Transmission
shifts through four forward gears
Tip: Torque converter lock-up
improves fuel economy and
can feel like an additional
gear
D (Overdrive Off)
Press the overdrive switch (1) to
disengage overdrive; an indicator
light on the instrument panel
will illuminate
2 = Second
Place the gearshift lever in second
when accelerating on slippery
roads or to provide additional
engine braking on downgrades
1 = First
Provides maximum engine braking
on steep downgrades4X4 system*
AUTO = Four-
wheel drive
Power at normal
speed to front/rear
axles as required for traction, 4X4
light off
LOCK = Full time power to
front/rear axles, 4X4 light on
To shift from 4X4 AUTO to
4X4 LOCK (any forward speed):
Press switch
To shift from 4X4 LOCK to 4X4
AUTO high (any forward speed):
Press switch
Climate
Controls
Transmission
Quick Tips Mazda 2002 Tribute page 12
page 13
Revised January 14, 2002
A/COFF
MAX
A/C
123
*Denotes optional equipment
1OFF/ON
Manual
transmission
Depress clutch
pedal completely
to start engine and
change gears
Stop vehicle completely before
shifting into reverse
LOCK