odometer MERCEDES-BENZ A-CLASS HATCHBACK 2012 Owners Manual

Loading guidelines
............................ 268
Locking
see Central locking
Locking (doors)
Automatic ........................................ 81
Emergency locking .......................... .81
From inside (central locking but-
ton) .................................................. 80
Locking centrally
see Central locking
Locking verification signal (on-
board computer) ............................... 223
Luggage compartment enlarge-
ment ................................................... 271
Important safety notes .................. 271
Luggage compartment floor
Important safety notes .................. 274
opening/closing ............................ 274
stowage well, under ....................... 274
Luggage net ....................................... 271
Lumbar support
Adjusting the 4-way lumbar sup-
port .................................................. 96 M
M+S tyres ........................................... 320
Main-beam headlamps
Changing bulb s.............................. 114
Display message ............................ 241
Switching Adaptive Highbeam
Assist on/of f................................. 109
Switching on/of f........................... 107
Maintenance
see ASSYST PLUS
Manual transmission
Engaging reverse gear ................... 151
Gear lever ...................................... 150
Pulling away ................................... 144
Shift recommendation ................... 151
Shifting to neutral .......................... 151
Starting the engine ........................ 144
Matt finish (cleaning instructions) .. 292
Memory card (audio) ......................... 215
Memory function ............................... 101
Mercedes-Benz Service Centre
see Qualified specialist workshop Message memory (on-board com-
puter) .................................................. 229
Messages
see Display messages
Mirrors
see Exterior mirrors
see Rear-view mirror
see Vanity mirror (in sun visor)
Mobile phone
Frequencies ................................... 336
Installation ..................................... 336
Menu (on-board computer) ............ 215
Notes/placing in the bracket ......... 279
Transmission output (maximum) .... 336
Mobile telephone
Pre-installed bracket ...................... 281
Modifying the programming (key) ..... 75
MOExtended tyres ............................. 300
Motorway mode ................................ 109
MP3
Operating ....................................... 215
see Separate operating instructions
Multifunction display
Function/note s............................. 210
Permanent display ......................... 220
Multifunction steering wheel
Operating the on-board compute r..2 09
Overview .......................................... 33 N
Navigation Menu (on-board computer) ............ 213
see separate operating instructions
Notes on running in a new vehicle .. 142 O
Occupant safety Children in the vehicle ..................... 50
Important safety notes .................... 40
Odometer .......................................... .211
see Total distance recorder
see Trip meter
Oil
see Engine oil
On-board computer
AMG menu ..................................... 226 Index
13

:
Lane Keeping Assist camera
If you select km
kmon the on-board computer in
the Display unit Speed-/odometer
Display unit Speed-/odometer func-
tion (Y page 220), Lane Keeping Assist is
active starting at a speed of 60 km/h. If the
miles
miles display unit is selected, the assistance
range begins at 40 mph.
Important safety notes G
WARNING
Lane Keeping Assist cannot always clearly
identify lane markings.
In these cases, Lane Keeping Assist may:
R give an unnecessary warning
R not give a warning
There is a risk of an accident.
Always pay particular attention to the traffic
situation and keep in lane, especially if Lane
Keeping Assist alerts you. G
WARNING
The Lane Keeping Assist warning does not
return the vehicle to the original lane. There is a risk of an accident.
Always steer, apply the brakes or accelerate
the vehicle yourself, especially if Lane Keep-
ing Assist alerts you.
If you fail to adapt your driving style, Lane
Keeping Assist can neither reduce the risk of
an accident nor override the laws of physics. Lane Keeping Assist cannot take into account
road, weather or traffic conditions. Lane
Keeping Assist is only an aid. You are respon- sible for the distance to the vehicle in front, for vehicle speed, for braking in good time,
and for staying in the lane.
Lane Keeping Assist does not keep your vehi-
cle in its lane.
The system may be impaired or may not func-
tion if:
R there is poor visibility, e.g. due to insuffi-
cient illumination of the road, or due to
snow, rain, fog or spray
R there is glare, e.g. from oncoming traffic,
the sun or reflection from other vehicles
(e.g. if the road surface is wet)
R the windscreen is dirty, misted up, dam-
aged or covered, for instance by a sticker in
the vicinity of the camera
R no, or several, unclear lane markings are
present for one lane, e.g. in a construction
area
R the lane markings are worn away, dark or
covered up, e.g. by dirt or snow
R the distance to the vehicle in front is too
small and the lane markings thus cannot be
detected
R the lane markings change quickly, e.g.
lanes branch off, cross one another or
merge
R the road is narrow and winding
R there are highly variable shade conditions
on the road
A warning may be given if a front wheel
passes over a lane marking. It will warn you by means of intermittent vibration in the steer-
ing wheel for up to 1.5 seconds.
Activating Lane Keeping Assist
X Activate Lane Keeping Assist using the on-
board computer; to do so, select Standard Standard
or Adaptive
Adaptive(Y page 219).
If you drive at speeds above 60 km/h and
lane markings are detected, the lane mark-
ings in the assistance graphics display
(Y page 217) are shown in green. 200
Driving systemsDriving and parking

Settings menu
Introduction In the
Settings
Settings menu, you have the following
options:
R changing the instrument cluster settings
R changing the light settings
R changing the vehicle settings
R changing the auxiliary heating settings
(Y page 224)
R changing the convenience settings
R restoring the factory settings
Instrument cluster Selecting the unit of measurement for dis-
tance
You can determine whether the multifunction display shows some messages in miles or kil-
ometres.
X Press the =or; button on the steer-
ing wheel to select the Settings
Settings menu.
X Press the :or9 button to select the
Inst. cluster Inst. cluster submenu.
X Press ato confirm.
X Press the :or9 button to select the
Display unit Speed-/odometer:
Display unit Speed-/odometer: func-
tion.
You will see the selected setting km kmor
miles
miles.
X Press the abutton to save the setting.
The selected unit of measurement for dis-
tance applies to:
R the digital speedometer in the Trip
Trip menu
R the total distance recorder and the trip
meter
R the trip computer R
the current consumption and the range
R the navigation instructions in the Navi
Navi
menu
R cruise control
R SPEEDTRONIC
R DISTRONIC PLUS
R ASSYST PLUS service interval display
Switching the additional speedometer
on/off
Only vehicles with manual transmission have this function.
X Press the =or; button on the steer-
ing wheel to select the Settings Settingsmenu.
X Press the :or9 button to select the
Inst. cluster
Inst. cluster submenu.
X Press ato confirm.
X Press :or9 to select the Dig.
Dig.
speedo [mph]:
speedo [mph]: function.
You will see the selected setting: Activa‐
Activa‐
ted
ted orDeactivated
Deactivated.
X Press the abutton to save the setting.
i The speed is displayed in mph.
i Vehicles for the United Kingdom: this
function is unavailable.
The Dig.
Dig. speedo
speedo [mph]
[mph]function allows you
to choose whether the status area in the mul- tifunction display always shows the speed in
mph
mph instead of the outside temperature.
Selecting the permanent display function
i Vehicles for the United Kingdom: this
function is unavailable.
You can determine whether the multifunction display permanently shows your speed or the
outside temperature.
X Press the =or; button on the steer-
ing wheel to select the Settings
Settingsmenu.
X Press the :or9 button to select the
Inst. cluster
Inst. cluster submenu.
X Press ato confirm. 220
Menus and submenusOn-board computer and displays