Control MERCEDES-BENZ C-Class 2008 W204 Comand Manual
[x] Cancel search | Manufacturer: MERCEDES-BENZ, Model Year: 2008, Model line: C-Class, Model: MERCEDES-BENZ C-Class 2008 W204Pages: 225, PDF Size: 3.26 MB
Page 41 of 225
40 Audio
Radio
i Information on the COMAND control system
and how to operate it can be found on
(
page 14) and (page 31).
i For many operating functions you can also
use the buttons on the multifunction steering
wheel, e.g. the (, &, $ or % but-
tons, for selecting a station or a menu or scroll-
ing through lists (
page 23).
From the COMAND control unit
Press the X function button.
i Press the button repeatedly to switch wave-
band in the sequence FM, AM, WB (
page 42)
and SatRadio* mode (
page 45). Pressing
again will switch back to FM radio mode.
From the COMAND controller
From another main function
Select “Audio” K “Audio” K “FM / AM
Radio” in the display.
i If radio mode was active last, you only need
to select “Audio”.
Within the audio function
Select “Audio” K “FM / AM Radio”.The radio display appears. The last se-
lected station in the last selected wave-
band is heard.
Display with Audio menu
1Main function line
2Audio menu
3Current audio mode
i You can switch to the various audio modes
in the audio menu:
FM / AM radio mode
SatRadio* mode (page 45)
CD-/DVD audio/MP3 mode (“Disc” and
“Memory Card” are described together in
this guide), (
page 60)
Music Register (page 67)
Aux mode (page 71)Radio display
1Display/selection window with station
or frequency
2Memory preset number
3Name or frequency of selected station
4Sound settings
5WB (Weather band)
6AM radio
7FM radio
8Stored station list
9Radio functions
Radio
Switching to the radio
Page 43 of 225
42 Audio
Radio
You can switch the radio between the FM,
AM, and WB wavebands.
Select “FM” 7, “AM” 6 or “WB” 5 in
the radio display.
The last selected station in the select-
ed waveband is heard.
i In the WB waveband, COMAND displays the
Channel name instead of the station names
and/or frequency.
or
Press the X function button on the
control unit repeatedly until the desired
band is selected.
i Press the button repeatedly to switch wave-
band in the sequence of FM, AM, WB and
SatRadio* mode (
page 47). Pressing again will
switch back to FM radio mode.
You can tune to a station via station search
or by manual frequency input.
Tuning to a station via station search
Rotate ymz or slide omp if the dis-
play/selection window is highlighted.
or
Press G or H on the COMAND
control unit.
The search proceeds upwards or down-
wards and stops at the next receivable
station.
Tuning to a station via manual
frequency input
Select “Radio” K “Enter Frequency” in
the radio display.
An input menu appears.
or
Press ß on the control unit.
To enter a frequency: Press number
buttons on the control unit.
i You can only select numbers that are cur-
rently permissible.
COMAND will tune to the frequency en-
tered.
i If in the FM or AM wavebands you enter a
frequency outside the frequency sub-range, CO-
MAND will select the next frequency down.
Tuning to a station via the station
memory
Select “Presets” in the radio display.
or
Press n if the display/selection win-
dow is highlighted.
The station memory appears. The
dotR in front of a preset indicates that
the currently tuned station is stored
there.
To select a station: Rotate ymz or
slide qmr.
To tune to a station: Press n.
or
Press a number key, e.g. 4, on the
control unit.
Switching wavebands Tuning to a station
Page 45 of 225
44 Audio
Radio
Slide mr to highlight the submenu.
To select the weather band:
Rotate ymz or slide omp until “WB” is
highlighted.
Press n.
1Display selection window
2Currently received channel
3Sound settings
4Weather band
5AM radio
6FM radio
7Channel list
Searching a channel
Rotate ymz or slide omp if the dis-
play/selection window is highlighted.
or
Press G or H on the control unit.
The search proceeds upwards or down-
wards and stops at the next receivable
channel.
Selecting a channel from channel list
Slide mr to highlight the submenu.
To call up the channel list:
Rotate ymz or slide omp until
“Channel” is highlighted.
Press n.
The channel list appears.
To select a channel: Rotate ymz or
slide qmr.
To tune to the selected channel:
Press n.
or
Press a number key, e.g. 4, on the
control unit at any time.
Switching to weather band
Page 46 of 225
45 Audio
Satellite radio*
In chapter “Satellite radio*”, you will find
detailed information regarding
selecting a station and a program cate-
gory
memory functions
sound adjustments
If you have not done so already, please fa-
miliarize yourself with these functions by
reading chapter “At a glance”.
i Optional satellite radio equipment and a
subscription to satellite radio service provider
are required for the satellite radio operation de-
scribed here.
i Note that categories and channels shown in
illustrations are dependent on programming con-
tent delivered by the service provider. Program-
ming content is subject to change. Therefore,
channel and categories shown in illustrations
and descriptions contained in this manual may
differ from the channels and categories deliv-
ered by the service provider.
Satellite radio service may be unavailable or in-
terrupted from time to time for a variety of rea-
sons, such as environmental or topographic
conditions and other things we can’t control.
Service might also not be available in certain
places (e.g., in tunnels, parking garages, or with-
in or next to buildings) or near other technolo-
gies.i SIRIUS Satellite Radio provides over 130
channels of digital-quality radio, including 100%
commercial-free music, sports, news and enter-
tainment.
SIRIUS Satellite Radio uses a fleet of high-power
satellites to broadcast 24 hours per day, coast-
to-coast, in the contiguous U.S.
This diverse, satellite-delivered programming is
available for a monthly subscription fee. For
more information, call the SIRIUS Service Center
(
page 46) or contact www.sirius.com (USA) or
www.siriuscanada.com (Canada).
Satellite radio*
Important notes
Page 49 of 225
48 Audio
Satellite radio*
Changing the category
Satellite radio stations are split up into cat-
egories. You can select between various
categories such as News/Talk, Sports and
Country, if available. The category list is
sorted alphabetically.
Selecting a category
To call up the category list:
Rotate ymz or slide omp until
“Category” is highlighted in the sub-
menu
Press n.
The category list appears.
To select a category:
Rotate ymz or slide qmr.
To set the selected category:
Press n.
The selected category will appear in
the display. The channel last tuned to in
the new category will begin to play.
At the beginning of the category list the
category “All Channels” will appear.
This category is sorted numerically (by
channel numbers) and allows you to
scroll through all available channels.
Selecting a channel
You can use the following functions:
Channel search
Channel selection via direct entry
(
page 48)
Selecting a channel from the SatRadio
channel list (
page 49)
Selection from the preset menu
(
page 50)
Channel search
Rotate ymz or slide omp if the SatRa-
dio main display is highlighted.
or
Press G or H on the control unit.
The search proceeds upwards or down-
wards and stops at the next channel in
the selected category.SatRadio menu
On the submenu bar rotate ymz or
slide omp until “SatRadio” is highlight-
ed.
Press n.
The SatRadio menu appears.
Entering a channel number directly
Select “SatRadio” K “Enter Channel”
in the SatRadio menu.
An input dialog appears.
or
Page 50 of 225
49 Audio
Satellite radio*
Press ß on the control unit.
To enter a channel: Press correspond-
ing number buttons on the control unit.
i You can only select numbers that are cur-
rently permissible.
COMAND will tune to the channel en-
tered.
Selecting a channel from the SatRadio
channel list
Select “SatRadio” K “Channel List” in
the SatRadio menu.
The channel list appears.
To select a channel: Rotate ymz or
slide qmr.
To tune to the selected channel:
Press n.
Memory functions
i There are 10 presets available.
You can use the following functions:
Saving channels manually
Selecting a channel from the Satellite
preset memory (
page 50)
Storing channels manually
Press n if the display/selection win-
dow is highlighted.
or
Select “Presets” on the SatRadio sub-
menu bar.
In both cases, the channel memory will
appear. The dotRin front of a preset
indicates that the currently tuned chan-
nel is stored there.
Station memory
To select a preset: Rotate ymz or
slide qmr.
To store a channel to a selected pre-
set: Press and hold n until a signal
tone sounds.
or
Press and hold a number key, e.g. 4,
until a signal tone sounds.
The channel is stored.
Page 51 of 225
50 Audio
Satellite radio*
Storing via Autostore
i The function automatically assigns receiv-
able channels to the presets. The channels
which were stored in the channel memory man-
ually will be overwritten in this process.
Press n if the display/selection win-
dow is active.
Select “Autostore”.
or
Select “Presets” K “Autostore” from
the SatRadio submenu.
COMAND searches for receivable
channels. A corresponding message is
displayed. The available channels are
automatically stored under the presets.
Cancelling storage procedure
Select “Cancel”.Selecting a channel from the memory
list
To call up the channel list:
In the submenu rotate ymz or slide
omp until “Presets” is highlighted.
The presets list appears.
To select a channel: Rotate ymz or
slide qmr.
To tune to the selected channel:
Press n.
or
Press a number key, e.g. 4, on the
control unit.
Displaying information
In the submenu rotate ymz or slide
omp until “Info” is highlighted.
Press n.
Information about the current program
appears.1Category
2Channel
3Artist
4Song title
You will see (if available)
the full name
additional information
Switching back to the SatRadio main dis-
play:
Slide omp.
Page 52 of 225
51 Audio
Satellite radio*
Displaying service information
You can call the provider service center for
questions or releases whenever you need.
Select “SatRadio” K “Service” in the
SatRadio submenu.
The service information appears.
1Phone number of the provider,
(SIRIUS) or “Call Service Provider”
2SIRIUS ID of your satellite receiver
Slide omp to switch back to the SatRa-
dio main display.
Channel list updates
While receiving a new channel list the mes-
sage “Updating Channels” will appear.
The channel last tuned will be muted until
the update is completed. You cannot oper-
ate the satellite radio.
After completion of the update, the
Satellite radio main menu will appear.
The channel last tuned to will begin to play.Sound settings
Refer to chapter “At a glance” on how to
adjust sound settings.
Volume (page 35)
Balance control and fader (page 36)
Bass and treble control (page 36)
Surround sound (page 38)
Page 57 of 225
56 Audio
CD audio/DVD audio and MP3
Magazine menu, one disc loaded
1Magazine compartment occupied,
ejecting possible
2Empty magazine compartment
To exit menu: Press the Load button
again.
or
Select “Back”.
or
Press the í button next to the
COMAND controller.Filling empty magazine compartments
Press the Load button u.
The Magazine menu appears. The cur-
rently playing compartment is indicat-
ed by a red number or, if the magazine
is empty, compartment 1 is marked.
Select “Fill Empty Slots”.
The message “Please Insert Disc
will be displayed.
i Only insert a CD after COMAND has prompt-
ed you to do so with this message. Only insert
one CD per magazine compartment.
Insert a disc into the slot with the print-
ed side upwards.
The message “Please Wait...” will be
displayed. If the disc has been loaded,
the DVD changer will switch to the next
empty magazine compartment. The
message “Please Insert Disc
be displayed.
Repeat the step until all compartments
have been loaded.
The DVD changer plays the last loaded
disc if it has been inserted correctly
and is permissible.If the loading process has not been
completed, COMAND will play the disc
inserted last.
To end loading procedure:
Press the Load button
u again.
or
Select “Back”.
or
Press the í button next to the
COMAND controller.
Page 61 of 225
60 Audio
CD audio/DVD audio and MP3
From the control unit
Load CD/DVD (page 54) or PCMCIA-
memory card (
page 57).
COMAND loads the inserted medium
and begins playback.
or
Press the y function button.
i Pressing the function button switches di-
rectly to the disc mode selected last (CD audio,
DVD audio, MP3-CD or DVD video). COMAND
then accesses all discs in the DVD changer, the
memory card or the Music Register.
If necessary, select CD/DVD audio/
MP3 media (
page 62).
or
When playing a DVD video: Open the
media list as described under “Select-
ing DVD media” (
page 78).
Select an audio storage medium.
This switches to the required disc
mode.
From the COMAND controller
From another main function
Select “Audio” K “Audio” K “Disc” or
“Memory Card” or “Music Register” in
the Audio menu (
page 40).
i If the required mode was active last, you
only need to select “Audio”.
Within the audio function
Select “Audio” K “Disc” or “Memory
Card” or “Music Register” in the Audio
menu.
i “Disc” accesses audio discs in the DVD
changer, “Memory Card” selects the PCMCIA
memory card, “Music Register” selects the Mu-
sic Register.
If necessary, select CD/DVD audio/
MP3 media (
page 62).
This switches to the required disc
mode.
Example of CD audio mode display
1Disc type J
2Track number
3Track name (only if stored on disc as
CD text)
4Elapsed track time
5Visual track and time display
6Current playback option
7Sound settings
8Media selection
9Disc name (only if stored on disc as CD
text)
aCalls up track list
bStorage medium position in the media
list
cRecord function (ripping), (
page 68)
dPlayback options
Switching to CD audio, DVD audio or
MP3