Control MERCEDES-BENZ C-Class 2008 W204 Comand Manual

143 Navigation
POI input
When entering characters, the list entry 3
always displays a category that best
matches the characters already entered.
COMAND automatically adds matching let-
ters
3 to those characters 2 already en-
tered by the user.
Entering characters
To select characters: Rotate ymz or
slide omp.
Slide qmr to switch between the lines.
To confirm character selection:
Press n.
Deleting an entry
To delete individual characters: Se-
lect õ at the bottom right of the
speller and press n.
or
Press the î button next to the
COMAND controller.
To delete an entire entry: Select
õ and press and hold n until the
entire entry has been deleted.
or
Press and hold î until the entire en-
try has been deleted.Cancelling an entry
Select “Back” at the bottom left of the
speller and press n.
or
Press the í button.
The previous menu appears.
Accepting first list entry
Press and hold n until the list appears
without speller.
or
If COMAND can match the characters en-
tered definitively to one entry, the list ap-
pears automatically without the speller.Switching to the main category list with-
out predictive speller
You can switch to the list at any point while
entering characters.
Slide qm repeatedly until the list ap-
pears without the speller.
or
Select B and press n.
Main category list without predictive
speller
Example: Main category list for POIs in the
vicinity of the location
1Selected main category with + sym-
bol for subcategories

163 System settings
Opening System menu .............. 164
Menu overview ........................... 164
Display settings .......................... 164
Time settings .............................. 165
Read-out settings ....................... 166
Voice control settings ............... 167
Bluetooth
® settings ................... 169
Reset ............................................ 171
Setting the system language .... 171
Tele Aid* ...................................... 172

164 System settings
System settings

Press the function button Z.
or

Select “System” in the menu bar with
main functions.
Adjusting brightness

Select “System” K “System Settings”
K “Display” K “Brightness”.
1Brightness bar

To adjust brightness: Rotate ymz or
slide qmr.
The brightness bar moves up or down.

To confirm selection: Press n or
slide om.
System settings
Opening System menu
Menu overview
System settingsLanguage
Display
Time
Text reader speed
Voice control
Bluetooth
Reset (resets
COMAND to
factory settings)
i Use this function
to delete your person-
al data, e.g. before
selling your vehicle.
Setting language
Display settings

166 System settings
System settings
Setting time zone and switching be-
tween daylight saving time and stan-
dard time
i The correct time zone and daylight saving/
standard time settings are essential for the fol-
lowing system functions to operate correctly:
Route guidance on routes with time-depen-
dent traffic routing
Calculation of estimated time of arrival
Time stamps for calls received and calls di-
aled

To set time zone: Select “System” K
“System Settings”
K “Time” K “Time
Zone”.
A time zone list appears.

Rotate ymz or slide qmr to select the
appropriate time zone.

To switch between Daylight Saving
and standard time: Select “Daylight
Saving Time” (Summer) or “Standard Ti-
me” (Winter).
The dotRin front of a list entry indi-
cates the current setting.

To save setting and exit menu:
Slide omp.
Setting reading speed
You can use this feature to adjust the read-
out speed of the address book via voice
control.

Select “System” K “System Settings”
K “Text Reader Speed”.
The list of possible speeds appears.
The dotRin front of the list entry indi-
cates the current setting.

Select the desired speed.
The new setting is stored.
Read-out settings

167 System settings
System settings
Switching help screen on/off

Select “System” K “System Settings”
K “Voice Control”.

Select “Help Window”.
This switches the help screen on D or
off C.
i In addition to the audible instructions, the
help screen displays other information during
the individualization process and the later voice
control mode.
Individualization function
You can use the individualization function
option to adapt the Voice control system
to your own voice and therefore improve
voice recognition. This will affect the ability
of the system to recognize the voices of
other users, and for this reason it can be
switched off (
page 168).
The individualization function comprises
two parts and lasts around 5 minutes. Dur-
ing the process you will practice a few
number sequences and voice commands.
Starting new individualization process
i You can only start the individualization func-
tion when the vehicle is stationary. First switch
off all interfering units/functions, such as radio
or navigation. After starting, the system will take
you through the training by means of audible in-
structions.

Select “System” K “System Settings”
K “Voice Control” K “Start New Indi-
vidualization”.
You will be visually and audibly prompt-
ed to confirm whether you would like
additional information.

Select “Yes” or “No”.If you select “No”, the first part of the
individualization will start. You will be
prompted to confirm that you wish to
practice numbers or voice commands.
If you select “Yes”, an information
screen will appear and you will hear in-
formation about the sequence of the in-
dividualization process. The first part of
the individualization then starts auto-
matically
or

To close display: Press n.
You will be prompted to confirm
that you wish to practice numbers
or voice commands.
Voice control settings


168 System settings
System settings
Once the first part is over, you will be
prompted to confirm that you wish to
start the second part.

Select “Yes” or “No”.
If you select “No”, the individualization
is cancelled. The data from the first
part is saved automatically.
If you select “Yes”, the second part of
the individualization will start.
The individualization is ended once the
second part has been completed. A corre-
sponding message is displayed. The data
from the second part is saved automatical-
ly.Cancelling first or second part of indi-
vidualization process

Select “Cancel”.
You will be prompted to confirm that
you really wish to cancel.

Select “Yes” or “No”.
If you select “Yes”, the individualization
is cancelled. The data from the can-
celled part will be lost.
If you select “No”, the cancelled part of
the individualization will restart.
Deleting any previous individualization
data

Select “System” K “System Settings”
K “Voice Control” K “Delete Individu-
alization”.
You will be prompted to confirm that
you really wish to delete it.

Select “Yes” or “No”.
The individualization data will be delet-
ed or retained on the basis of the selec-
tion. A corresponding message is
displayed.Switching individualization on/off

Select “System” K “System Settings”
K “Voice Control” K “Individualization
On”.
This switches the individualization on
D or off C.

172 System settings
Tele Aid*
The Tele Aid* system
(Tele Aid – Telematic Alarm Identification
on Demand)
The Tele Aid* system consists of three
types of response:
automatic and manual emergency
Roadside Assistance
Information
Automatically
An emergency call is initiated automatical-
ly following an accident in which the emer-
gency tensioning devices (ETDs) or air
bags deploy.
Initiating an emergency call manually
The SOS button is located in the overhead
control panel.

Briefly press SOS button cover to open.

Press SOS button (for longer than
2 seconds).
The indicator lamp in the SOS button
will flash until the emergency call is
concluded.

Wait for a voice connection to the Re-
sponse Center.

Close cover after the emergency call is
concluded.
i During the emergency call message “Emer-
gency Call Activated” is displayed, operation
from COMAND is not possible.
For a complete description and additional
information on Emergency calls please re-
fer to the vehicle Operator's Manual.
Tele Aid*Emergency calls

173 System settings
Tele Aid*
The Roadside Assistance button • is lo-
cated in the overhead control panel.

Press and hold Roadside Assistance
Button  (for longer than
2 seconds).
A call to a Mercedes-Benz Roadside As-
sistance dispatcher will be initiated.
The button will flash while the call is in
progress.

Describe the nature of the need for as-
sistance.
For a complete description and additional
information on Roadside Assistance calls
please refer to the vehicle Operator's Man-
ual.The Information button ¡ is located in
the overhead control panel.

Press and hold Information button
¡ (for longer than 2 seconds).
A call to the Customer Assistance Cen-
ter will be initiated. The button will
flash while the call is in progress.
For a complete description and additional
information on Information calls please re-
fer to the vehicle Operator's Manual.
Roadside AssistanceInformation calls

175 Voice Control
Overview . . . . . . . . . . . . . . . . . . .176
Phone operation . . . . . . . . . . . . .179
Navigation . . . . . . . . . . . . . . . . . .183
A d d r e s s b o o k . . . . . . . . . . . . . . . 1 9 1









Radio and Satellite Radio* . . . . .195









DVD changer . . . . . . . . . . . . . . . .198
External equipment (AUX) . . . . .199
C o m m a n d l i s t . . . . . . . . . . . . . . . 2 0 0









Troubleshooting . . . . . . . . . . . . .208

176 Voice Control
Overview
The following symbols indicate:
sthat you have to say something
tthat there is a voice output from the
voice control
uthat the system shows information
on the display.
You can use the voice control system to
operate the following systems depending
on the equipment in your vehicle:

Phone

Navigation

Address book

Audio (radio, satellite radio*,
DVD changer, memory card,
music register)
Say the commands without pausing
between individual words. If you enter a
command that does not exist or is incor-
rect, the voice control system asks you for
a new command with “Please repeat” or
“Please repeat your entry!”.
Overview
Operating Safety
G Warning
Please devote your attention first and fore-
most to the traffic situation you are in. While
the system permits hands-free phone oper-
ation, attention to traffic may be diverted
not only by physical operation of a phone,
but also by the distraction of a phone con-
versation while driving. As such, for safety
reasons, we encourage the driver to stop the
vehicle in a safe place before answering or
placing a phone call.
For safety reasons, you should only select a
destination when the vehicle is stationary.
While the navigation system provides direc-
tional assistance, the driver must remain fo-
cused on safe driving behavior, especially
attention to traffic and street signs, and
should utilize the system’s audio cues while
driving.
The navigation system does not supply any
information on stop signs, yield signs, traffic
regulations or traffic safety rules. Their ob-
servance always remains in the driver’s per-
sonal responsibility. DVD maps do not cover
all areas nor all routes within an area.
Traffic regulations always have priority over
any route recommendations given.
Bear in mind that at a speed of just 30 mph
(approximately 50 km/h), your vehicle is
covering a distance of 44 feet (approximate-
ly 13.5 m) every second.
G Warning
Navigation announcements are intended to
direct you while driving without diverting
your attention from the road and driving.
Please always use this feature instead of
consulting the map display for directions.
Consulting the symbols or map display for
directions may cause you to divert your at-
tention from driving and increase your risk
of an accident.
G Warning
Please do not use the Voice Control System
in an emergency, as the tone of your voice
may change in a stressful situation. This
could cause a delay in completing your
phone call in a timely manner. This could
distract you in an emergency situation and
cause you to be involved in an accident.
Symbols only used in this chapter
Usage