Set time MERCEDES-BENZ C-Class 2008 W204 Comand Manual

Content
Importing vCards from a
PCMCIA card . . . . . . . . . . . . . . . . 110
Navigation . . . . . . . . . . . . . . . . . . . . 111
Introduction . . . . . . . . . . . . . . . . . . . . 112
Safety instructions . . . . . . . . . . . . 112
Updating the map software . . . . . 112
General information . . . . . . . . . . . 115
Input restriction . . . . . . . . . . . . . . 116
Menu overview . . . . . . . . . . . . . . . 117
Switching to navigation mode . . . 118
Basic settings . . . . . . . . . . . . . . . . 120
Destination input . . . . . . . . . . . . . . . . 126
Introduction to destination input . 126
Entering a destination via the address
126
Entering a destination from the desti-
nation memory . . . . . . . . . . . . . . . 135
Entering destination from the last des-
tinations . . . . . . . . . . . . . . . . . . . . 137
Entering destination via the map . 137
Entering stopover destination. . . . 138
POI input . . . . . . . . . . . . . . . . . . . . . . 141
Entering a POI in local area of
destination . . . . . . . . . . . . . . . . . . 141
Entering a POI in the vicinity of the
location . . . . . . . . . . . . . . . . . . . . . 141Entering a POI in the vicinity of a
specific location . . . . . . . . . . . . . . 141
Entering a POI via a name search . 141
Entering a POI via a phone number
search . . . . . . . . . . . . . . . . . . . . . . 141
Choosing a POI category . . . . . . . 142
Entering a POI via the map . . . . . . 147
Route guidance . . . . . . . . . . . . . . . . . 148
General information . . . . . . . . . . . 148
Driving maneuver . . . . . . . . . . . . . 148
Example display without driving
maneuver . . . . . . . . . . . . . . . . . . . 150
Traffic lane recommendations . . . 150
Destination or destination region
reached. . . . . . . . . . . . . . . . . . . . . 152
Off-road and off-map . . . . . . . . . . 152
Navigation announcements . . . . . 153
Cancelling route guidance . . . . . . 154
Resuming route guidance after
cancelling . . . . . . . . . . . . . . . . . . . 154
Detour function. . . . . . . . . . . . . . . 154
Alternative route . . . . . . . . . . . . . . 155
Route browser . . . . . . . . . . . . . . . 155
Displaying destination information . . .
155
Destination memory . . . . . . . . . . . . . . 157
Home address . . . . . . . . . . . . . . . 157Saving a destination in the
destination memory . . . . . . . . . . . 159
Deleting destination or home
address from the destination
memory. . . . . . . . . . . . . . . . . . . . . 161
Last destinations . . . . . . . . . . . . . . . . 162
Saving a destination permanently
in the destination memory . . . . . . 162
Saving vehicle location in the last
destinations . . . . . . . . . . . . . . . . . 162
Saving crosshairs position in the
last destinations . . . . . . . . . . . . . . 162
Deleting one of the last
destinations . . . . . . . . . . . . . . . . . 162
System settings. . . . . . . . . . . . . . . . 163
System settings . . . . . . . . . . . . . . . . . 164
Opening System menu . . . . . . . . . 164
Menu overview . . . . . . . . . . . . . . . 164
Display settings . . . . . . . . . . . . . . 164
Time settings . . . . . . . . . . . . . . . . 165
Read-out settings . . . . . . . . . . . . . 166
Voice control settings . . . . . . . . . . 167
Bluetooth® settings . . . . . . . . . . . 169
Reset. . . . . . . . . . . . . . . . . . . . . . . 171
Setting the system language . . . . 171
Tele Aid*. . . . . . . . . . . . . . . . . . . . . . . 172

7
Where to find it
Introduction
This operating guide has been designed to
help you use your COMAND control unit in
all situations. Each chapter has its own col-
or code in order to make it easier to find in-
formation.
At a glance
Here you will find an overview of the com-
ponents of COMAND. Then you will find ex-
amples illustrating how to operate
COMAND and information on the basic
functions. If you are operating a COMAND
for the first time or have rented the vehicle,
you should first read this chapter.
Audio
Here you will find all information regarding
the audio function and its radio, SatRadio*,
CD-audio/DVD audio/MP3, music register
and audio aux modes.
Video
Here you will find all information regarding
the video system.
Telephone
The telephone functions are described
here. You will also find information on the
address book.
Navigation
Here you will find detailed information re-
garding the following topics:

Setting options for the map display and
the route calculation

Destination input

POI input

Route guidance

Destination memory
System settings
Here you will find all the important infor-
mation regarding the system settings of
the COMAND.
Furthermore, you will find here basic infor-
mation about TeleAid* (SOS, Roadside as-
sistance and Information calls).
Voice Control
Here you will find information about oper-
ating several COMAND functions via Voice
Control.
Indexes
The technical terminology glossary ex-
plains the most important technical terms.
Content and keyword indexes are intended
to help you find information quickly.
Where to find it

15 At a glance
COMAND control system
The currently selected function and the
associated menus are shown on the
COMAND display. The COMAND display is
divided into several areas.
1Status line
2Main functions
3Main area
4SubmenusThe status line 1 displays the time and
the current telephone status.
You can change the main function using
the menu bar 2. The selection is made us-
ing the COMAND controller (
page 20).
In this example, the Audio main function is
set to the radio mode and the main area 3
is active.
i The arrangement of the menus can vary, de-
pending on the equipment. The menus for the full
equipment version are shown in this guide.
Menu overview
Having selected a main function, you will
see the submenu at the bottom edge 4 of
the COMAND display.
Additional menus are available at the top
of the COMAND display 2 for the naviga-
tion, audio and telephone main functions
(
page 16).
COMAND display

44 Audio
Radio
Slide mr to highlight the submenu.
To select the weather band:
Rotate ymz or slide omp until “WB” is
highlighted.
Press n.
1Display selection window
2Currently received channel
3Sound settings
4Weather band
5AM radio
6FM radio
7Channel list
Searching a channel
Rotate ymz or slide omp if the dis-
play/selection window is highlighted.
or
Press G or H on the control unit.
The search proceeds upwards or down-
wards and stops at the next receivable
channel.
Selecting a channel from channel list
Slide mr to highlight the submenu.
To call up the channel list:
Rotate ymz or slide omp until
“Channel” is highlighted.
Press n.
The channel list appears.
To select a channel: Rotate ymz or
slide qmr.
To tune to the selected channel:
Press n.
or
Press a number key, e.g. 4, on the
control unit at any time.
Switching to weather band

60 Audio
CD audio/DVD audio and MP3
From the control unit
Load CD/DVD (
page 54) or PCMCIA-
memory card (

page 57).
COMAND loads the inserted medium
and begins playback.
or
Press the y function button.
i Pressing the function button switches di-
rectly to the disc mode selected last (CD audio,
DVD audio, MP3-CD or DVD video). COMAND
then accesses all discs in the DVD changer, the
memory card or the Music Register.
If necessary, select CD/DVD audio/
MP3 media (

page 62).
or
When playing a DVD video: Open the
media list as described under “Select-
ing DVD media” (

page 78).
Select an audio storage medium.
This switches to the required disc
mode.
From the COMAND controller
From another main function
Select “Audio” K “Audio” K “Disc” or
“Memory Card” or “Music Register” in
the Audio menu (

page 40).
i If the required mode was active last, you
only need to select “Audio”.
Within the audio function
Select “Audio” K “Disc” or “Memory
Card” or “Music Register” in the Audio
menu.
i “Disc” accesses audio discs in the DVD
changer, “Memory Card” selects the PCMCIA
memory card, “Music Register” selects the Mu-
sic Register.
If necessary, select CD/DVD audio/
MP3 media (

page 62).
This switches to the required disc
mode.
Example of CD audio mode display
1Disc type J
2Track number
3Track name (only if stored on disc as
CD text)
4Elapsed track time
5Visual track and time display
6Current playback option
7Sound settings
8Media selection
9Disc name (only if stored on disc as CD
text)
aCalls up track list
bStorage medium position in the media
list
cRecord function (ripping), (

page 68)
dPlayback options
Switching to CD audio, DVD audio or
MP3

61 Audio
CD audio/DVD audio and MP3
Example of DVD audio display
1Disc type K
2Track number
3Track name (only if stored on disc)
4Elapsed track time
5Visual time and track display
6Current playback option
7Sound settings
8Media selection
9Disc name (only if stored on disc)
aCalls up track list
bStop function
cPause function
dStorage medium position in the media
list
ePlayback optionsExample of MP3 display
1Disc type L or M
2Track number
3Track name
4Elapsed track time
5Visual time and track display
6Current playback option
7Sound settings
8Media selection
9Current folder
aCalls up folder list
bStorage medium position in the media
list
cPlayback options
i An example of a media list display can be
found on (

page 62).
i The function is only available in DVD audio
mode.
Switch to DVD audio mode.
To interrupt playback: Select h.
The g display changes to T.
To resume playback: Select T.
Playback will then continue at the point
at which it was interrupted.
To stop playback: Press h again
when playback is stopped.
or
Select h twice in immediate succes-
sion during playback.
The option selector remains at T.
To restart playback: Select T.
Playback starts from the beginning of
the DVD.
Stop function

67 Audio
Music Register
You can record tracks from audio CDs and
store them as MP3 files in the Music Reg-
ister. The memory capacity is 4 GB.
! Keep your original music files in a safe
place. A fault with the COMAND may cause the
music files stored in the Music Register to be
lost. Mercedes-Benz USA, LLC is not liable for
any loss of data.
From another main function
Select “Audio” K “Audio” K “Music
Register” in the display with Audio
menu (

page 40).
i If “Music Register” was active last, you only
need to select “Audio”.
Within the audio function
Select “Audio” K “Music Register”.
The Music Register is loaded. The Mu-
sic Register display appears.
No music files available:
A message will be displayed.
First record music files to the Music
Register (

page 68).
Music files available:
You will hear the first track of the first
folder found or playback will start from
the point listened to last.
Example display: Music Register
1Storage media type - Music Register
N
2Track number
3Track name
4Elapsed track time
5Visual time and track display
6Current playback option
7Sound settings
8Media selection
9Folder functions
aCurrent folder
bStorage medium position in the media
list
cCalls up Music Register menu
Music RegisterSwitching to Music Register

75 Video
DVD video

After use, replace the discs into the
sleeve.

Protect the discs from heat and direct
sunlight.
Some DVDs may not comply with the
NTSC or PAL TV playback standards.
Sound, picture and other playback prob-
lems may occur when you play such DVDs.
As standard, COMAND can play video
DVDs which meet the following criteria:

Region code 1 or region code 0 (no re-
gion code)
i With a video DVD having another region
code, a corresponding message will be dis-
played.

PAL or NTSC TV standard
Information on this can usually be found ei-
ther on the DVD itself or on the DVD
sleeve.
i The factory setting for COMAND is region
code 1. An authorized Mercedes-Benz Center
can change this setting. This will enable you to
play video DVDs with other region codes, provid-
ed that they have been made to the PAL or NTSC
TV standard.
It may be the case that some functions or
actions may not be possible at certain
times, or may not be possible in general,
depending on the DVD.
When you activate such functions or ac-
tions, this is indicated by the 7 symbol in
the display.
Proceed as described in the “Loading
CDs and DVDs” section (
page 54).
Proceed as described in the “Ejecting
CDs and DVDs” section (
page 57).
DVD playback conditions
Functional restrictions
Loading DVDs
Ejecting DVDs

77 Video
DVD video
From the control unit
Load DVD video (page 55).
COMAND loads the inserted medium
and starts playing it.
or
Press the function button y.
i Pressing the function button switches di-
rectly to the disc mode selected last (CD audio,
DVD audio, MP3 CD or DVD video). COMAND
then accesses all discs in the DVD changer.
If necessary select “Changer” and in
the media list select (
page 78) a DVD
video I.
From the COMAND controller
Select “Video” in the main function
menu.
To display: Slide qmr.
To hide: Slide qmr.
or
Wait apprx. eight seconds.
Control menu displayed
1Disc type
2Current track
3Current scene
4Elapsed track time
5Displays menu system
To display: Press n.
To hide: Slide qm and select “Full
Screen”.
Menu system displayed
1DVD-Video menu
2Pause function
3Stop function
4Media selection
5Sound settings
Switching to DVD videoDisplaying/hiding control menuDisplaying/hiding menu system

81 Video
DVD video
Stopping film or skipping to the
beginning/end of a scene
Select any menu item from the DVD
menu.
The selection menu appears.
To stop a film: Select the menu item
“Stop”.
To skip to the end of the scene: Se-
lect the menu item r.
To skip to the beginning of the
scene: Select the menu item p.
i Depending on the DVD, it is possible the
menu items p and r either have no func-
tion or no function in certain parts of the DVD
menu. This is indicated by the 7 symbol on the
display.
Switching to the next DVD menu up
Press the í button.
or
Select the corresponding menu item
from the DVD menu.
or
Select any menu item from the DVD
menu.
In the selection menu select the menu
item “Go Up”.
i Depending on the DVD, it is possible the
menu item “Go Up” either has no function or no
function in certain parts of the DVD menu. This is
indicated by the 7 symbol on the display.
Back to movie
Press the í button repeatedly until
the film is shown.
or
Select the corresponding menu item
from the DVD menu.
or
Select any menu item from the DVD
menu.
In the selection menu select the menu
item “Back (to movie)”.
i Depending on the DVD, it is possible the
menu item “Back (to movie)” either has no func-
tion or no function in certain parts of the DVD
menu.
i The function is not available for all DVDs. If
it is available, you can set the DVD menu lan-
guage, the audio language or the audio format.
The number of settings is determined by the DVD
content. The settings may also be possible in the
DVD menu (
page 80).
In DVD video mode, if necessary dis-
play the menu system (
page 77).
Select “DVD-Video” K “DVD Func-
tions”.
Select “Audio Language”.
A selection menu will appear after a
short time. The dotRin front of an en-
try indicates the currently selected lan-
guage.
To change setting: Rotate ymz or
slide qmr until the desired setting is
reached.
To save setting: Press n.
To exit menu without changes: Slide
omp.
Setting language