weight MERCEDES-BENZ C CLASS 2019 Owners Manual

Protectingthe environment
ENVIRONMENTALNOTEEnvironmentaldamageduetooperating conditions andpersonal drivingstyle
The pollutant emission ofyourvehicle isdirectlyrelatedtothewayyou operateyourvehicle.
Helptoprotectthe environmentbyoperatingyourvehicle in an environmentallyresponsi‐ble manner. Please observethefollowingrec‐ommendations on operating conditions andpersonal drivingstyle.
Operating conditions:
Make surethatthe tire pressure is cor‐rect.
Do not carryany unnecessaryweight(e.g.roof luggageracks onceyou nolonger needthem).
Adheretothe service intervals.Aregularly servicedvehicle will contrib‐utetoenvironmental protection.
Always havemaintenanceworkcarriedout at aqualified specialistworkshop.
Personal drivingstyle:
Do not depressthe accelerator pedalwhenstartingthe engine.
Do notwarmupthe engine whilethevehicle isstationary.
Drive carefully and maintain a suitabledistance fromthevehicle in front.
Avoid frequent, sudden accelerationand braking.
Changegear in good time and use eachgear onlyupto

Status ofthe front passenger front airbag
Function ofthe automatic front passengerfront airbag shutoffThe automatic front passenger front airbag shut‐off is abletodetect whetherthe front passengerseat is occupiedbya person or achildrestraintsystem. The front passenger front airbag is ena‐bled or disabled accordingly.
When installing achildrestraint system onthefront passenger seat, always make sure ofthefollowing:
REnsurethatthechildrestraint system is posi‐tioned correctly (page48).
RAlways observethechildrestraint systemmanufacturer's installation instructions.
RNever place objects, e.g. cushions, under orbehindthechildrestraint system.
RFullyretractthe seat cushion length adjust‐ment.
RThe entire base ofthechildrestraint systemmust alwaysrestonthe seat cushion ofthefront passenger seat.
RThe backrest oftheforward-facingchildrestraint system must lie asflat as possibleagainstthe backrest ofthe front passengerseat.
RThechildrestraint system must nottouchtheroof or be put understrainbythe headrestraints.Adjustthe seat backrest inclina‐tion andthe headrestraint setting accord‐ingly.
\nWARNINGRisk of injuryor death duetoobjects betweenthe sitting surface andthechildrestraint system
Objects betweenthe sitting surface andthechildrestraint system could affectthe func‐tion ofthe automatic front passenger airbagshutoff.
This couldresult inthe front passenger air‐bag not functioning as intended during anaccident.
Do not place any objects betweenthesitting surface andthechildrestraintsystem.
The entire base ofthechildrestraintsystem must alwaysrestonthe sittingsurface ofthe front passenger seat.
The backrest oftheforward-facingchildrestraint system must, asfar as possi‐ble, beresting onthe seat backrest ofthe front passenger seat.
Always comply withthechildrestraintsystem manufacturer's installationinstructions.
A person onthe front passenger seat mustobservethefollowing information:
RFasten seat belts correctly (page36).
RSit in an almost upright seat position withtheir back againstthe seat backrest.
RSit withtheirfeetresting onthefloor, if pos‐sible.
The front passenger front airbag mayotherwisebe disabledbymistake,forexample inthefol‐lowing situations:
RThe front passenger transferstheirweightbysupportingthemselves on avehicle armrest.
Occupant safety43

RThe front passenger sits in such awaythattheirweight israised fromthe sitting sur‐face.
\nWARNINGRisk of injuryor death duetodeactivated front passenger airbag
IfthePASSENGER AIRBAG OFF indicatorlamp is lit,the front passenger airbag is disa‐bled. It will not be deployed intheevent ofan accident and cannotperformits intendedprotective function.
A person inthe front passenger seat couldthen,forexample, come into contact withthevehicle interior, especially ifthe person issittingtoo closetothe cockpit.
Ifthe front passenger seat is occupied,always ensurethat:
RThe classification ofthe person inthefront passenger seat is correct andthefront passenger airbag is enabled or disa‐bled in accordance withthe person inthefront passenger seat.
RThe front passenger seat has been movedasfar back as possible.
RThe person is seated correctly.
Ensure, bothbefore and duringthe jour‐ney,thatthestatus ofthe frontpassenger airbag is correct.
Ifthe front passenger seat is occupied,the clas‐sification ofthe person orchildrestraint systemonthe front passenger seattakes place afterthefront passenger front airbag shutoff self-test.ThePASSENGER AIRBAG indicator lamps dis‐playthestatus ofthe front passenger front air‐bag.
Always observethe notes onthe function ofthePASSENGER AIRBAG indicator lamps(page44).
Function ofthePASSENGER AIRBAG indica‐tor lamps
Self-testof automatic front passenger frontairbag shutoffWhenthe ignition is switched on, a self-test isperformed during whichthe twoPASSENGERAIRBAG ON and OFF indicator lamps light upsimultaneously.
44Occupant safety

Reversingthe PRE-SAFE®system measures
If an accident did not occur,the pre-emptivemeasuresthatweretaken arereversed.
You will needtoperformcertain settingsyour‐self.
Ifthe seat belt pre-tensioning is notreduced,movethe seat backrest back slightly.The locking mechanismreleases.
Function of PRE-SAFE®PLUS (anticipatoryoccupant protection plus)
PRE-SAFE®PLUS can detect certain impacts,particularlyan imminentrear impact, andtakepre-emptive measurestoprotectthevehicleoccupants. These measures cannot necessarilyprevent an imminent impact.
PRE-SAFE®PLUS can implementthefollowingmeasures independently of eachother:
RTighteningthe seat belts onthe driver's seatand front passenger seat.
RIncreasing brake pressure whenthevehicleisstationary.This brake application is can‐
celed automatically whenthevehicle pullsaway.
If an accident did not occur,the pre-emptivemeasuresthatweretaken arereversed.
System limitations
The system will not initiate any action inthefol‐lowing situations:
Rwhen backing up
The system will not initiate any braking applica‐tion inthefollowing situations:
Rwhilst driving
or
Rwhen entering orexiting a parking spacewhile usingActiveParking Assist
Safely transportingchildren inthevehicle
Always observewhenchildren are travelinginthevehicle
Alsostrictly observethe safety notesforthespecific situation. Inthiswayyou canrecog‐nize potentialrisks andavoid dangers ifchil‐
dren are traveling inthevehicle(page 49).
Be diligentBear in mindthat neglectingtosecure achild inthechildrestraint system may haveserious con‐sequences. Always be diligent in securing achildcarefully beforeevery journey.
Toimprove protectionforchildrenyoungerthan12years old or under 5ft(1.50 m) in height,Mercedes-Benzrecommendsyou observethefollowing information:
RAlways securethechild in achildrestraintsystem suitableforthis Mercedes-Benzvehi‐cle.
RThechildrestraint system must be appropri‐atetothe age,weight and size ofthechild.
RThevehicle seat must be suitablefor instal‐ling achildrestraint system.
Accidentstatistics showthatchildren secured intherear seats aregenerallysaferthanchildrensecured inthe front seats.Forthisreason,Mercedes-Benzstrongly advisesthatyou installachildrestraint system on arear seat.
48Occupant safety

Genericterm"childrestraint system"
Thegenerictermchildrestraint system is usedinthis Operator's Manual. Achildrestraint sys‐tem is,forexample:
Ra baby car seat
Rarearward-facingchild seat
Raforward-facingchild seat
Rachild booster seat with a backrest and seatbelt guide
Mercedes-Benzrecommends using achildbooster seat with a backrest.
Thechildrestraint system must be appropriatetothe age,weight and size ofthechild.
Observing lawsand legalrequirementsAlways observethe legalrequirements whenusing achildrestraint system inthevehicle.
Observingstandardsforchildrestraint sys‐tems
Allchildrestraint systems must meetthefollow‐ingstandards:
RU.S.Federal MotorVehicle SafetyStandards213 and 225
RCanadian MotorVehicle SafetyStandards213 and210.2
Confirmationthatthechildrestraint systemcomplies withthestandards can befound on aninstruction label onthechildrestraint system.This confirmation can also befound inthe instal‐lation instructionsthat are included withthechildrestraint system.
Detectingrisks,avoiding danger
Securing systemsforchildrestraint systemsinthevehicle
Only usethefollowing securing systemsforchildrestraint systems:
RtheLATCH-type (ISOFIX) mounting brackets
Rthevehicle's seat belt system
RtheTopTether anchorages
Installing aLATCH-type (ISOFIX)childrestraintsystem is preferred.
Simply attachingtothe securingrings onthevehicle canreducetherisk of installingthechildrestraint system incorrectly.
When securing achild withthe integrated seatbelt oftheLATCH-type (ISOFIX)childrestraintsystem, always comply withthe permissiblegrossweightforthechild andchildrestraint sys‐tem (page54).
A booster seat may be necessarytoachieveproper seat belt positioningforchildrenover40 lbs (18kg) inweight or untiltheyreach aheight where athree-point seat belt can beinstalled properlywithout a booster seat.
Mercedes-Benzrecommends a suitablechildbooster seat with a backrest and seat belt guide.
Advantage of arearward-facingchildrestraint systemIt is preferabletotransporta baby or a smallchild in a suitablerearward-facingchildrestraintsystem. Inthis case,thechild sits inthe oppo‐
Occupant safety49

site directiontothe direction of travel andfacesbackwards.
Babies and smallchildren havecomparativelyweak neck muscles inrelationtothe size andweight oftheir head. Therisk of injurytothe cer‐vical spine during an accident can bereduced inarearward-facingchildrestraint system.
Always secure achildrestraint system cor‐rectly
\nWARNINGRisk of injuryor death causedbyincorrect installation ofthechildrestraint system
Ifthechildrestraint system is incorrectlyinstalled on a suitable seating position, itcannot performits intended protective func‐tion.
Thechild cannot berestrained intheevent ofan accident, heavy braking or a suddenchange of direction.
Always comply withthe manufacturer'sinstallation instructionsforthechildrestraint system and its correct use.
Makesurethatthe entire base ofthechildrestraint system alwaysrests onthe sitting surface ofthe seat.
Never place objects under or behindthechildrestraint system, e.g. cush‐ions.
Always usechildrestraint systems withthe original cover designedforthem.
Alwaysreplace damaged coverswithgenuine covers.
\nWARNINGRisk of injuryor death fromunsecuredchildrestraint systems inthevehicle
Ifthechildrestraint system is not correctlyinstalled or secured, it couldrelease intheevent of an accident, sudden braking or asuddenchange in direction.
Thechildrestraint system could beflungaround and hitvehicle occupants.
Always installchildrestraint systemscorrectly,even when not in use.
Always comply withthechildrestraintsystem manufacturer's installationinstructions.
RAlways observethechildrestraint systemmanufacturer's installation and operatinginstructions aswell asthevehicle-specificinformation:
-InstalltheLATCH-type (ISOFIX)childrestraint system ontherear seat(page54).
-Securethechildrestraint system withtheseat belt ontherear seat(page 58).
-Securethechildrestraint system withtheseat belt onthe front passenger seat(page 60). Observethe specificinstructionsfortherearward-facing andforward-facingchildrestraint systems(page 59).
Ifthe front passenger seat is occupied,ensure, bothbefore and duringthe jour‐ney,thatthestatus ofthe front
50Occupant safety

possible. In addition,the seat backrest ofthechildrestraint system must, asfar aspossible, lieflat againstthe backrest ofthevehicle seat.
Afterthechildrestraint system has beenremoved,replacethe headrestraints againimmediately and adjustthem correctly.
sFor certainchildrestraint systems inweightgroup 2 or 3,there may berestrictions inthe maximum size setting, e.g. duetopossi‐ble contact with theroof.
sThechildrestraint system must not beten‐sioned betweentheroof andthe seat cush‐ion and/or be installedfacingthe wrongdirection. Where possible, adjustthe seatcushion inclination accordingly.
sThechildrestraint system must not be putunderstrainbythe headrestraints.Adjustthe headrestraints accordingly.
1LATCH-type (ISOFIX) mounting bracket
Beforeevery trip, make surethattheLATCH-type(ISOFIX)childrestraint system is engaged cor‐rectly in bothmounting brackets inthevehicle.
NOTEBe careful nottodamagethe seatbeltforthe center seat when installingthechildrestraint system
Make surethatthe seat belt is not trap‐ped.
AttachtheLATCH-type (ISOFIX)childrestraint systemtobothmounting bracketsinthevehicle.
SecuringTopTether
\nWARNINGRisk of injuryor death iftherear seat backrests are not locked afterinstallingTopTether belts
Iftherear seat backrests are not locked,theycouldfoldforwards intheevent of an acci‐dent or during braking or suddenchanges ofdirection.
As aresult,childrestraint systems cannotperformtheir intended protective function.Rear seat backreststhat are not locked can
56Occupant safety

do not interferewiththe correctrouting ofTopTether belt4.
Securingthechildrestraint system withtheseat belt
Securingthechildrestraint system withtheseat belt ontherear seat
\nWARNINGRisk of injuryiftherearbenchseat/rear seat and seat backrestare not engaged
Iftherear benchseat/rear seat and seatbackrest are not engagedtheycouldfoldfor‐wards, e.g. when braking suddenly or intheevent of an accident.
RIfthis isthe case,thevehicle occupantwould beforced intothe seat beltbytherear benchseat/rear seat orbythe seatbackrest. The seat belt cannotprotect asintended and couldresult in additionalinjury.
RObjects or loads inthe trunk/cargo com‐partment cannotberestrainedbytheseat backrest.
Make surethatthe seat backrest andtherear benchseat/rear seat areengaged beforeeverytrip.
Iftherear seat backrest is not engaged andlocked,thered lockverification indicator will bevisible.
When installing a belt-securedchildrestraintsystem, observethefollowing:
sAlways comply withthe manufacturer'sinstallation and operating instructionsforthechildrestraint system used.
sWhen using a category 0/0+ baby carseat and a category Irearward-facingchildrestraint system on arear seat:adjustthe front seat sothatthe seat doesnottouchthechildrestraint system.
sWhen using a category Iforward-facingchildrestraint system:removethe headrestraint fromtherespective seat, if possi‐ble.
Afterremovingthechildrestraint system,replacethe headrestraints again immedi‐ately and adjustthem correctly.
sThe backrestoftheforward-facingchildrestraint system must, asfar as possible, beresting onthe seat backrest oftherearseat.
sFor certainchildrestraint systems inweightcategory II or III,there may berestrictions inthe maximum size setting, e.g. duetopossi‐ble contact with theroof.
sThechildrestraint system must not be putunderstrain betweentheroof andthe seatcushion and/or be installedfacingthewrong direction. Where possible, adjusttheseat cushion inclination accordingly.
sThechildrestraint system must not be putunderstrainbythe headrestraints.Adjustthe headrestraints accordingly.
sMake surethatthechild'sfeetdo nottouchthe front seat. If necessary,movethe frontseatforward slightly.
58Occupant safety

Securingthechildrestraint system withtheseat belt onthe front passenger seat
When installing a belt-securedchildrestraintsystem onthe front passenger seat, alwaysobservethefollowing:
sObservethechildrestraint system manufac‐turer's installation and operating instruc‐tions.
sWhen using aforward-facingchildrestraintsystem in Group I:removethe headrestraint fromtherespective seat, if possi‐ble.
Whenyouremovethechildrestraint sys‐tem, installthe headrestraint again immedi‐ately and adjust allthe headrestraints cor‐rectly.
sThe backrestoftheforward-facingchildrestraint system must lie asflat as possibleagainstthe backrest ofthe front passengerseat.
sFor certainchildrestraint systems inweightgroup II or III,there may berestrictions inthe maximum size setting, e.g. duetopossi‐ble contact with theroof.
sThechildrestraint system must not be putunderstrain betweentheroof andthe seatcushion and/or be installedfacingthewrong direction.Adjustthe seat backrestinclination accordingly.
sThechildrestraint system must not be putunderstrainbythe headrestraints.Adjustthe headrestraints accordingly.
sNever place objects under or behindthechildrestraint system, e.g. cushions.
The seat belt onthe front passenger side isequipped with a special seatbeltretractor.
When activated,the special seatbeltretractorensuresthatthe seat belt does not slacken oncethechildrestraint system is secured(page54).
Setthe front passenger seat asfar back aspossible and movethe seat intothe highestposition.
Fullyretractthe seat cushion length adjust‐ment.
Adjustthe seat cushion inclination sothatthe front edge ofthe seat cushion is inthe
highest position andtherear edge oftheseat cushion is inthe lowestposition.
Setthe seat backresttoan almostverticalposition.
Installthechildrestraint system.The entire base ofthechildrestraint systemmust alwaysrestonthe seat cushion ofthefront passenger seat.
Always make surethatthe shoulder beltstrap is correctlyrouted fromthe seat beltoutlet ofthevehicletothe shoulder beltguide onthechildrestraint system.The shoulder beltstrap must beroutedfor‐wards and downwards fromthe seat belt out‐let.
If necessary,adjustthe seat belt outlet andthe front passenger seat accordingly.
60Occupant safety

Always be particularlycareful when inthe vicinity ofthetailpipe andtailpipetrims and supervisechildrenveryclosely when inthis area.
Before any contact, allowthe car partstocool down.
The drivingcharacteristics ofyourvehicle aredependent onthe distribution ofthe load withinthevehicle.You should bearthefollowing inmind when loadingthevehicle:
Rneverexceedthe permissible gross mass orthe gross axleweightratingforthevehicle(including occupants). Thevalues are speci‐fied onthevehicle identification plate onthevehicle's B-pillar.
Rthe load must not protrude abovethe upperedge ofthe seat backrests.
Ralways placethe load behind unoccupiedseats if possible.
Rsecurethe load usingthe tie-downeyes anddistributethe loadevenly.
Stowage spaces inthevehicle interior
Overview ofthe frontstowagecompart‐ments
1Stowage compartment inthe doors
2Stowage compartment inthe armrest with amultimedia and USB connection
3Stowage compartment inthe front centerconsole with a USB connection
4Glovebox
Locking and unlockingtheglovebox
Turnthe emergencykey aquarter turn clock‐wiseH(to lock) or counter-clockwiseG(tounlock).
Seats andstowing105