keyless MERCEDES-BENZ C-CLASS COUPE 2015 User Guide

becomes trapped, press the switch to open
the side window again. Opening and closing the side win-
dows
The switches for the side windows are located
on the driver' sdoor. There is also aswitch for
the front-passenger side window on the front-
passenger door.
The switches on the driver' sdoor take prece-
dence. :
Fron tleft
; Fron tright
X Turn the key to position 1or 2in the ignition
lock.
X To open manually: press and hold the cor-
responding button.
X To open fully: press the butto nbeyond the
point of resistance and release it.
Automatic operation is started.
X To close manually: pull the corresponding
butto nand hold it.
X To close fully: pull the buttonbeyond the
point of resistance and release it.
Automatic operation is started.
X To interrupt automatic operation: press/
pull the correspondin gswitch again.
If you press/pull the switch beyond the point of resistance and release, automatic operation is
started in the correspondin gdirection. You can
stop automatic operation by pressing/pulling
again.
You can continue to operate the side windows
after switching off the engin eorremoving the
key. This function remains activ efor five
minutes or until the driver' sorfront-passenger
door is opened. Convenience opening feature
General notes If the key is in the immediate vicinity to the vehi-
cle, the convenience openin gfunction is availa-
ble.
Vehicles with KEYLESS-GO or KEYLESS-GO
star tfunction: you can ventilate the vehicle
before you start driving.
To do this, the key is used to carry out the fol-
lowing function ssimultaneously:
R unlock the vehicle
R open the side windows
R open the sliding sunroof or the panorama slid-
ing sunroof and the roller sunblind
R switch on the seat ventilation for the driver's
seat
The "convenience opening" feature is also avail-
able when the vehicle is unlocked.
Convenience opening feature X
Press and hold the %buttonont he key
until the side windows and the sliding sunroof
or panorama sliding sunroof are in the desired position.
If the roller sunblinds of the panorama sliding sunroof are closed, the roller sunblinds are
opened first.
X Press and hold the %buttononcem ore
until the panorama sliding sunroof reaches
the desired position.
X To interrupt convenience opening: release
the % button. Convenience closing feature
Important safet ynotes G
WARNING
When the convenience closin gfeature is oper-
ating, parts of the body could become trapped
in the closin garea of the side window and the
sliding sunroof .There is arisk of injury.
Observe the complet eclosin gprocedure
when the convenience closin gfeature is oper-
ating. When closin gmake sure that no parts of
the body are in the closin garea. 94
Side windowsOpening and closing

Vehicles with KEYLESS-GO or KEYLESS-GO
start function: if the key is in the immediate
vicinity to the vehicle, the convenience closing
function is available.
Whe nyou lock the vehicle, yo ucan simultane-
ously:
R close the sid ewindows
R close the sliding sunroo forthe panorama
sliding sunroof
On vehicles with apanorama sliding sunroof,
yo uc an then close the rolle rsunblinds.
Note sont he automatic reversing feature for:
R the sid ewindow s(Ypage 93)
R the sliding sunroo forthe panorama sliding
sunroo f(Ypage 97)
Usin gthe key X
Press and hol dthe & button unti lthe side
window sand the sliding sunroo forthe pano-
ram asliding sunroo fare fully closed.
X Make sure that al lthe sid ewindow sand the
sliding sunroo forpanorama sliding sunroof
are closed.
X Vehicles with panorama sliding sunroof:
press and hol dthe & button once more
unti lthe rolle rsun blind softhe panorama slid-
ing sunroo fclose.
X To interrupt convenience closing: release
the & button.
Usin gKEYLESS -GO The driver'
sdoorand the doo ratwhich the han-
dl eisu sedm ustb oth be closed .The key mus tbe
outsid ethe vehicle. The ga pbetween the key
and the corresponding doo rhandles houl dnot
be greate rthan 1m. X
Touch recesse dsensor surface :on the
doo rhandleu ntilthe sid ewindow sand the
sliding sunroo forthe panorama sliding sun-
roo fare fully closed.
Make sure yo uonly touch recesse dsensor
surface :.
X Make sure tha tallthe sid ewindow sand the
sliding sunroo forpanorama sliding sunroof
are closed.
X Vehicles with panorama sliding sunroof:
touch recesse
dsensor surface :on the door
handl eagain untilthe rolle rsunblind soft he
panorama sliding sunroo fclose.
X To interrupt convenience closing: release
recesse dsensor surface :on the doo rhan-
dle. Resetting the side windows
If as idew indow can no longer be closed fully,
yo um ustreset it.
X Close al ldoors.
X Turn the key to position 1or 2in the ignition
lock.
X Pull the corresponding switch on the door
control panel unti lthe sid ewindow is com-
pletel yclosed (Y page 94).
X Hol dthe switch for an additiona lsecond.
If the sid ewindow opens agai nslightly:
X Immediately pull the corresponding switch on
the doo rcontrol panel unti lthe sid ewindow is
completely closed (Y page 94).
X Hol dthe switch for an additiona lsecond.
X If the corresponding sid ewindow remains
closed afte rthe button ha sbeenr eleased ,the
sid ew indow ha sbeenr eset correctly .Ifthis is
not the case, repea tthe step sabove again. Side windows
95Opening and closing Z

Adjusting th
esteering wheel electri-
cally :
To adjust th esteering whee lposition (fore-
and-af tadjustment)
; To adjust th esteering whee lheight
i Further relate dsubjects:
R EASY-ENTRY/EXIT feature (Y page 112)
R Storing setting s(Ypage 116)
R Operating th eon-bo ard computer
(Y page 233). Steering wheel heating
Switchin gon/off X
Turn th ekeyto position 2in th eignition lock
(Y page 145).
X To switch on/off: turnthe lever in th edirec-
tion of arrow :or;.
Indicato rlamp =lights up or goe sout.
Vehicles without KEYLESS-GO :when you
remove th ekeyfrom th eignition lock, th esteer-
ing whee lheating is switched off.
Vehicles wit hKEYLESS-GO :when you switch off
th ei gnition and open th edriver's door ,the
steering whee lheating is switched off. Steering wheel
111Seats,steering wheel and mirrors Z

Problems with the steering wheel heating
Problem
Possible causes/consequences and
M
MSolutions The steering wheel heat-
ing has switched itself
off prematurely or can-
not be switched on. The on-board voltage is too low because too many electrical consum-
ers are switched on.
X Switch off electrical consumers that you do not need, such as the
rear window heating or interior lighting. EASY-ENTRY/EXIT feature
Important safety notes G
WARNING
When the EASY-ENTRY/EXIT feature adjusts
the steering wheel, you and other vehicle
occupants –particularly children –could
become trapped. There is arisk of injury.
While the EASY-ENTRY/EXIT feature is mak-
ing adjustments, make sure that no one has
any body parts in the sweep of the steering
wheel.
Move the steering wheel adjustment lever if
there is arisk of entrapment by the steering
wheel. The adjustment process is stopped.
Press one of the memory function position but-
tons. The adjustment process is stopped. This
function is only available on vehicles with a
memory function. G
WARNING
If children activate the EASY-ENTRY/EXIT fea- ture, they can become trapped, particularly
when unattended. There is arisk of injury.
When leaving the vehicle, always take the key with you and lock the vehicle. Never leave
children unattended in the vehicle. G
WARNING
If you drive off while the EASY-ENTRY/EXIT
feature is making adjustments, you could lose
control of the vehicle. There is arisk of an
accident.
Always wait until the adjustment process is
complete before driving off. The EASY-ENTRY/EXIT feature makes gettingin
and out of your vehicle easier.
You can activate and deactivate the EASY-
ENTRY/EXIT feature using the multimedia sys-
tem (see the separate operating instructions).
Position of the steering wheel when the EASY-ENTRY/EXIT featureisa ctive The steering wheel tilts upwards if you:
R remove the key from the ignition lock
R with KEYLESS-GO: open the driver's door;
KEYLESS-GO must be in position 1
R with the key: open the driver's door; the key
must be in position 0or 1in the ignition lock
(Y page 145)
R open the driver's door when the ignition is
switched off
i The steering wheel only tilts upwards if the
driving position is stored after the steering
column adjustment has been adjusted
(Y page 116).
The most recent driving position of the steering
wheel is stored if:
R the ignition is switched off
R the settingiss tored using the memory func-
tion (Y page 116)
i The steering wheel only moves upwards if it
has not already reached the upper steering
limiter. 112
Steering wheelSeats, steering wheela
nd mirrors

Position of the steering wheel for driv-
ing The steering wheel is moved to the previously
set position if:
R the driver's door is closed and you insert the
key into the ignition lock
R you close the driver's door when the ignition
is switched on
R you press the Start/Stop button once on vehi-
cles with KEYLESS-GO
i The steering wheel only returns to the last
set position if the driving position is stored
after the seat or steering column has been
adjusted (Y page 116).
The most recent driving position of the steering
wheel is stored if:
R the ignition is switched off
R the settingiss tored using the memory func-
tion (Y page 116)
Crash-responsive EASY-EXIT feature If the crash-responsive EASY-EXIT feature is trig-
gered in an accident, the steering column will
move upwards when the driver's door is opened
or the key is removed from the ignition lock. This
makes it easier to exit the vehicle and rescue the
occupants.
The crash-responsive EASY-EXIT feature is only
operational if the EASY-EXIT/ENTRY feature is
activated in the multimedia system (see the sep-
arate operating instructions). Mirrors
Rear-view mirror X
Anti-dazzle mode: pivot anti-dazzle
switch :forwards or back. Exterior mirrors
Important safety notes G
WARNING
You could lose control of the vehicle while
driving if you:
R adjust the driver's seat, steering wheel or
mirrors
R fasten the seat belt
There is arisk of an accident.
Adjust the driver's seat, head restraint ,steer-
ing wheel and mirrors and fasten your seat
belt before startingt he engine. G
WARNING
The exterior mirrors reduce the size of the
image. Objectsv isible in the mirrors are
closer than they appear. You could misjudge
the distance from road users driving behind
you when changing lanes, for instance. There is ar isk of an accident.
You should therefore always look over your
shoulder to determine the actual distance
from road users driving behind you.
Adjusting the exterior mirrors Mirrors
113Seats, steering wheela nd mirrors Z

If the wiper blades are worn, the windscreen will
no longer be wiped properly. This could mean
you are unabletoo bserve the traffic conditions. Replacin
gthe wiperb lades
Important safety notes G
WARNING
If the windscree nwipers begin to move while
you are changing the wiper blades, you can be trapped by the wiper arm. There is arisk of
injury.
Alwayss witch off the windscreen wipers and
ignition before changing the wiper blades.
! Never open the bonnet/tailgate if
awiper
arm is folded awayf rom the windscreen/rear
window.
Never fold awindscreen wiper arm withou ta
wiper blade back onto the windscreen/rear
window.
Hold the windscree nwiper arm firmly when
you change the wiper blade. If you release the
wiper arm withou tawiper blade and it falls
onto the windscreen/rear window ,the wind-
screen/rear window may be damaged by the
force of the impact.
Mercedes-Benz recommends that you have
the wiper blades changed at aqualifieds pe-
cialist workshop.
! To avoid damaging the windscreen wiper
blades, make sure that you touch only the
wiper arm of the windscreen wiper.
Replacing the windscreen wiperb ladesMovingt
he wiperb lades to the vertical
position
On vehicles without KEYLESS-GO:
X Turn the key to position 1or 2in the ignition
lock (Y page 145).
X Set the windscree nwipers to the °posi-
tion.
X When the wiper arms have reached the verti-
cal position, turn the key to position 0and
remove it from the ignition lock.
X Fold the wiper arm awayf rom the windscreen.On vehicles with KEYLESS-GO:
X Switch off the engine.
X Remove yourf oot from the brake pedal.
X Set the windscree nwipers to the °posi-
tion.
X Press the Start/Stop button repeatedly until
the windscree nwipers start.
X When the wiper arms have reached the verti-
cal position, press the Start/Stop button.
X Fold the wiper arm awayf rom the windscreen.
Removing the wiperb lades X
Hold onto the wiper arm with one hand. With
the other hand, turn the wiper blade in the
direction of arrow :awayf rom the wiper arm
as far as it willg o.
X Slide catch ;in the direction of arrow =
until it engages in the removal positio nwith a
noticeable click. X
Remove the wiper blade in the direction of
arrow ?awayf rom the wiper arm. 126
Windscreen wipersLights and windscreenw
ipers

To start the vehicle without actively using the
key:
R the Start/Stop button must be inserted in the
ignition lock
R the key must be in the vehicle
R the vehicle must not be locked with the key or
KEYLESS-GO (Y page 81)
Do not keep the key:
R with electronic devices, e.g. amobile phone
or another key
R with metallic objects, e.g. coins or metal film
R inside metallic objects, e.g. ametal case
This can affect the key's functionality.
If you lock the vehicle with the key's remote
control or with KEYLESS-GO, after ashort time:
R you will not be able to switch on the ignition
with the Start/Stop button
R you will not be able to start the engine with the
Start/Stop button until the vehicle is
unlocked again
If you lock the vehicle centrally using the button
on the front door (Y page 87), you can continue
to start the engine with the Start/Stop button.
The engine can be switched off while the vehicle
is in motion by pressing and holding the Start/
Stop button for three seconds. This function
operates independently of the ECO start/stop
automatic engine switch-off function.
Key positions with the Start/Stop button :
Start/Stop button
; Ignition lock
When you switch on the ignition, all of the indi-
cator lamps in the instrument cluster light up.
Further information on situations where an indi-
cator lamp either fails to go out after starting the engine or lights up while driving (Y page 286).If Start/Stop button
:has not yet been
pressed, this corresponds to the key being
removed from the ignition.
X To switch on the power supply: press
Start/Stop button :once.
The power supply is switched on. You can now activate the windscreen wipers, for example.
The power supply is switched off again if:
R the driver's door is opened and
R you press Start/Stop button :twice when in
this position
X To switch on the ignition: press Start/Stop
button :twice.
The ignition is switched on.
The ignition is switched off again if:
R you do not start the engine from this position
within 15 minutes
R you press Start/Stop button :twice when in
this position
The power supply is switched off again if:
R the driver's door is opened and
R you press Start/Stop button :twice when in
this position
Removing the Start/Stop button You can remove the Start/Stop button from the
ignition lock and start the vehicle as normal
using the key.
It is only possible to switch between Start/Stop
button mode and key operation when the trans-
mission is in position P.
X Remove Start/Stop button :from ignition
lock ;.
You do not have to remove the Start/Stop but-
ton from the ignition lock when you leave the
vehicle. You should, however, alway stake the
key with you when leaving the vehicle. As long as
the key is in the vehicle:
R the vehicle can be started using the Start/
Stop button
R the electrically powered equipment can be
operated 146
DrivingDriving and parking

Starting procedureu
sing the Start/
Stop button The Start/Stop button is only available on vehi-
cles with KEYLESS-GO or the KEYLESS-GO start
function.
The Start/Stop button can be used to start the
vehicle manually without insertin gthe key into
the ignition lock. The key must be in the vehicle and the Start/Stop button must be inserted in
the ignition lock. This mode for startingt he
engine operates independently of the ECO
start/stop automatic engine start function.
You can start the engine if avalid key is in the
vehicle. Switch off the engine and always take
the key with you when leaving the vehicle, even
if you only leave it for ashort time. Pay attention
to the important safety notes.
X Depress the brake pedal and keep it
depressed.
X Press the Start/Stop button once
(Y page 145).
Vehicles with apetrol engine: the engine
starts.
Vehicles with adiesel engine: preglow is
activated and the engine starts. Pulling away
General notes G
WARNING
Vehicles with automatic transmission:
If the engine speed is above the engine idling speed and you then engage transmission
position Dor R,t he vehicle may accelerate
suddenly. There is arisk of an accident.
When engaging transmission position Dor R,
always keep the brake pedal firmly depressed
and do not depress the accelerator pedal at
the same time.
! Vehicles with manualt
ransmission:
change gear in good time and avoid spinning
the wheels. You could otherwise damage the
vehicle.
Depress the accelerator carefully when pulling
away.
The vehicle locks centrally once you have pulled
away.T he locking knobs in the doors drop down. You can open the doors from the inside at any
time.
You can also deactivate the automatic locking
feature; see the Digital Owner's Manual.
Vehicles with automatic transmission: it is
only possible to shift the transmission from posi- tion Pto the desired position if you depress the
brake pedal. If you do not depress the brake
pedal, the DIRECT SELECT lever can still be
moved but the parking lock remains engaged.
i Vehicles with automatic transmission:
upshifts take place at higher engine speeds
after acold start. This helps the catalytic con-
verter to reach its operating temperature
more quickly.
Information on automatically releasing the elec- trical parking brake (Y page 175).
Pulling away with atrailer To ensure that you do not roll backwards when
pulling away on an uphill slope, apply the electric
parking brake.
X Press and hold handle :.
The electric parking brake continues to brake
and prevent the vehicle from rolling back-
wards.
The red !indicator lamp in the instrument
cluster remains lit.
X Depress the accelerator pedal.
X As soon as the vehicle/trailer combination is
held by the driving force of the engine, release lever :.
The electric parking brake is released.
The red !indicator lamp in the instrument
cluster goes out.
For further information on the electric parking
brake, see (Y page 174).148
DrivingDriving and parking

If you mix dieself
uel with petrol, the flash
point of this fuel mixture is lowert han that of
pure dieself uel. When the engine is running,
components in the exhaust system may over-
heat unnoticed. There is arisk of fire.
Never refuel with petrol. Never add petrol to
dieself uel.
! Do not use dieseltor
efuel vehicleswith a
petrol engine. Do not switch on the ignition if you accidentally refuel with the wrong fuel.
Otherwise ,the fuel wille nter the fuel system.
Even small amounts of the wrong fuel can
resultind amage to the fuel system and the
engine. Notify aqualifieds pecialist workshop
and have the fuel tank and fuel lines drained
completely.
! Do not use petrol to refuel vehicle
swith a
diesele ngine. Do not switch on the ignition if
you accidentally refuel with the wrong fuel.
Otherwise ,fuel can enter the fuel system.
Even small amounts of the wrong fuel could
resultind amage to the fuel system and the
engine. The repairc osts are high. Notify a
qualifieds pecialist workshop and have the
fuel tank and fuel lines drained completely.
! Overfilling the fuel tank could damage the
fuel system.
! Take care not to spilla
ny fuel on painted
surfaces .You could otherwise damage the
paintwork.
! Use
afilter when adding fuel from afuel can.
The fuel lines and/or the fuel injection system could otherwise be blocked by particle sfrom
the fuel can.
If you overfill the fuel tank, some fuel may spray
out when you remove the fuel pump nozzle.
Further information on fuel and fuel quality
(Y page 371). Refuelling
General notes Observe the important safety notes
(Y
page 166).
If you unlock/lock the vehicle from the outside,
the fuel fillerf lap also unlocks/locks. The positio
nofthe8 fuel fillerc ap is dis-
played in the instrument cluster. The arrow next to the filling pump indicates the side of the vehi-
cle.
Openin gthe fuel fillerf lap :
To open the fuel fillerf lap
; To insert the fuel fillerc ap
= Tyre pressure table
? Instruction label on the fuel type to be refu-
elled
X Switch off the engine.
X Remove the key from the ignition lock.
or, on vehicle swith KEYLESS-GO start function
or KEYLESS‑GO:
X Open the driver's door.
The on-board electronics now have status 0.
This is the same as the key having been
removed.
X Press the fuel fillerf lap in the direction of
arrow :.
The fuel fillerf lap swings up.
X Turn the fuel fillerc ap anti-clockwise and
remove it.
X Insert the fuel fillerc ap into the holderont he
inside of fuel fillerf lap;.
X Completely insert the fillern eck of the fuel
pump nozzle into the tank, hook in place and refuel.
X Only fill the tank until the pump nozzle
switches off.
Do not add any more fuel after the pump stops
filling for the first time. Otherwise ,fuel may leak
out.
Vehicle swithadiese lengine: the fillern eck is
designed for refuelling at dieself illing pumps. Refuelling
167Driving and parking Z

Problems with the fuel and fuel tank
Problem
Possible causes/consequences and
M
MSolutions Fuel is leaking from the
vehicle.
G
WARNING
The fuel line or the fuel tank is faulty.
There is arisk of fire or explosion.
X Apply the electric parking brake.
X Switch off the engine.
X Remove the key from the ignition lock.
or, on vehicles with KEYLESS-GO start function or KEYLESS ‑GO:
X Open the driver's door.
The on-board electronics now have status 0.This is the same as the
key having been removed.
X Do not restart the engine under any circumstances.
X Consult aqualified specialist workshop. The engine does not
start. The fuel tank of
avehicle with adiesel engine has been run completely
dry.
X Refuel the vehicle with at least 5litres of diesel.
X Turn the ignition on for approximately ten seconds (Y page 145).
X Start the engine continuously for amaximum of ten seconds until it
runs smoothly.
If the engine does not start: X Turn the ignition on again for amaximum of ten seconds
(Y page 145).
X Start the engine again continuously for amaximum of ten seconds
until it runs smoothly.
If the engine does not start after three attempts:
X Consult aqualified specialist workshop. The fuel filler flap cannot
be opened. The fuel filler flap is not unlocked.
X Unlock the vehicle (Y page 81). The key battery is discharged or nearly discharged.
X Unlock the vehicle using the emergency key element (Y page 82).The fuel filler flap is unlocked, but the opening mechanism is jammed.
X Consult aqualified specialist workshop. AdBlue
®
(BlueTEC vehicleso nly)
General notes To function properly, BlueTEC exhaust gas after-
treatmen tmust be operated with the reducing
agent AdBlue ®
. On vehicles with an 8.5
lAdBlue ®
tank ,topping
up AdBlue ®
is not part of the maintenanc ework.
Under normal operatin gconditions, afull tank of
AdBlue ®
should last until the nex tservic edue
date.
When the supply of AdBlue ®
is down to approx-
imately 3.0 litres, the Refill AdBlue See Refill AdBlue See Refuelling
169Driving and parking Z