remote control MERCEDES-BENZ CL-CLASS 2007 User Guide

490 Controls in detail
Useful features
Automatic Maintenance Call
The 2007 CL-Class is equipped with a fea-
ture which considerably enhances the care
of your vehicle. Just prior to your vehicle
reaching a maintenance milestone Tele Aid
will initiate a message informing the ser-
vice center, important vehicle mainte-
nance information and the vehicle is due
for a service appointment. The message is
transmitted in the background with no
driver interaction necessary. This feature
allows your preferred Mercedes-Benz Cen-
ter to significantly improve the process of
arranging your service appointment and
ensures that your vehicle receives the best
possible care.Stolen Vehicle Recovery services
In the event your vehicle was stolen:
Report the incident to the police.
The police will issue a numbered
incident report.
Pass this number on to the
Mercedes-Benz Response Center along
with your password issued to you when
you subscribed to the service.
The Response Center will then attempt
to covertly contact the vehicle’s
Tele Aid system. Once the vehicle is
located, the Response Center will
contact the local law enforcement and
you. The vehicle’s location will only be
provided to law enforcement.
Garage door opener
The integrated remote control is capable of
operating up to three separately controlled
devices. It provides a convenient way to re-
place up to three hand-held remote con-
trols used to operate devices such as
garage door openers, gate openers, or oth-
er devices compatible with HomeLink
® or
some other systems.
Before the integrated remote control can
be used, it must be programmed to the ga-
rage door opener, gate operator or other
device you wish to operate. See the follow-
ing instructions for programming informa-
tion.
iThe Automatic Maintenance Call feature is
available if the relevant mobile phone network is
available and data connection is possible.
iWhen the anti-theft alarm or the tow-away
alarm stays on for more than 30 seconds, a call
is initiated automatically to the Response Cen-
ter. See anti-theft alarm system (
page 77) and
tow-away alarm (
page 78).
ProCarManuals.com

491 Controls in detail
Useful features
Interior rear view mirror with integrated
remote control
1Indicator lamp
2 3 4Signal transmitter button
Needed for programming (not part of vehi-
cle equipment):
5Hand-held remote control of ga-
rage door opener, gate operator
or other device
6Hand-held remote control but-
ton
Warning!G
Before programming the integrated remote
control to a garage door opener or gate
operator, make sure people and objects are
out of the way of the device to prevent po-
tential harm or damage. When programming
a garage door opener, the door moves up or
down. When programming a gate operator,
the gate opens or closes.
Do not use the integrated remote control
with any garage door opener that lacks
safety stop and reverse features as required
by U.S. federal safety standards (this
includes any garage door opener model
manufactured before April 1, 1982).
A garage door that cannot detect an object
– signaling the door to stop and reverse –
does not meet current U.S. federal safety
standards.
When programming a garage door opener,
park the vehicle outside the garage.
Do not run the engine while programming
the integrated remote control. Inhalation of
exhaust gas is hazardous to your health.
All exhaust gas contains carbon
monoxide (CO), and inhaling it can cause
unconsciousness and possible death.
ProCarManuals.com

492 Controls in detail
Useful features
Programming integrated remote
control
Step 1:
Switch on the ignition (page 336).
Step 2:
If you have previously programmed a
signal transmitter button and wish to
retain its programming, proceed to
step 3.
If you are programming the integrated
remote control for the first time, press
and hold the two outer signal transmit-
ter buttons2 and4 and release
them only when indicator lamp1 be-
gins to flash after approximately
20 seconds (do not hold the button for
longer than 30 seconds). This proce-
dure erases any previous settings for
all three channels and initializes the
memory.If you later wish to program a second
and/or third hand-held transmitter to
the remaining two signal transmitter
buttons, do not repeat this step and be-
gin directly with step 3.
Step 3:Hold the end of hand-held remote
control5 of the device you wish to
train approximately 2 to 5 in
(5 to12 cm) away from the signal trans-
mitter button (2, 3 or4) to be pro-
grammed, while keeping indicator
lamp1 in view.
Step 4:
Using both hands, simultaneously
press hand-held remote control
button6 and the desired signal trans-
mitter button (2, 3 or4). Do not
release the buttons until step 5 is com-
pleted.
Indicator lamp1 will flash, first slowly
and then rapidly.Step 5:
After indicator lamp1 changes from a
slow to a rapidly flashing light, release
the hand-held remote control button
and the signal transmitter button.
Step 6:
Press and hold the just-trained signal
transmitter button (2, 3 or4) and
observe indicator lamp1.
If indicator lamp1 stays on
constantly, programming is complete
and your device should activate when
the respective signal transmitter
button (2, 3 or4) is pressed and
released.
iIndicator lamp1 flashes immediately the
first time the signal transmitter button is pro-
grammed. If this button has already been pro-
grammed, the indicator lamp will only start
flashing after 20 seconds.
ProCarManuals.com

494 Controls in detail
Useful features
If you live in Canada or if you are having
difficulties programming a gate operator
(regardless of where you live) by using the
programming procedures, replace step 4
with the following:
Step 4:
Press and hold the signal transmitter
button (2, 3 or4). Do not release
this button until it has been successful-
ly trained.
While still holding down the signal
transmitter button (2, 3 or4),
“cycle” your hand-held remote control
button6 as follows: Press and hold
button6 for 2 seconds, then release
it for 2 seconds, and again press and
hold it for 2 seconds. Repeat this se-
quence on the hand-held remote con-
trol until the frequency signal has been
learned. Upon successful training, indi-
cator lamp1 will flash slowly and then
rapidly after several seconds.
Proceed with programming step 5 and
step 6 to complete.Reprogramming a single signal trans-
mitter button
To program a device using a signal trans-
mitter button previously trained, follow
these steps:
Switch on the ignition (page 336).
Press and hold the desired signal
transmitter button (2, 3 or4).
Do not release the button.
Indicator lamp1 will begin to flash af-
ter 20 seconds. Without releasing the
signal transmitter button, proceed with
programming starting with step 3.Operation of integrated remote control
Switch on the ignition (page 336).
Select and press the appropriate inte-
grated signal transmitter button (2,
3 or4) to activate the remote con-
trolled device.
The integrated remote control trans-
mitter continues to send the signal as
long as the button is pressed – up to
20 seconds.
Erasing integrated remote control
memory
Switch on the ignition (page 336).
Simultaneously press and hold outer
signal transmitter buttons2 and 4,
for approximately 20 seconds, until
indicator lamp1 flashes rapidly. Do
not hold for longer than 30 seconds.
The codes of all three channels are
erased.
iUpon completion of programming the inte-
grated remote control, make sure you retain the
hand-held remote control that came with the ga-
rage door opener, gate operator or other device.
You may need it for use in other vehicles, for fu-
ture programming of an integrated remote con-
trol, or simply for continued use as a hand-held
remote control to operate the respective device
in other situations.
iIf you sell your vehicle, erase the codes of all
three channels.
ProCarManuals.com

495 Controls in detail
Useful features
Programming tips
If you are having difficulty programming
the integrated remote control, here are
some helpful tips:

Check the frequency of hand-held re-
mote control5 (typically located on
the reverse side of the remote). The in-
tegrated remote control is compatible
with radio-frequency devices operating
between 280-390 MHz.

Put a new battery in hand-held remote
control5. This will increase the likeli-
hood of the hand-held remote control
sending a faster and more accurate sig-
nal to the integrated remote control.

While performing step 3, hold
hand-held remote control5 at differ-
ent lengths and angles from the signal
transmitter button (2, 3 or4) you
are programming. Attempt varying an-
gles at the distance of 2 to 5 in
(5 to 12 cm) away or the same angle at
varying distances.

If another hand-held remote control is
available for the same device, try the
programming steps again using that
other hand-held remote control. Make
sure new batteries are in the hand-held
remote control before beginning the
procedure.

Straighten the antenna wire from the
garage door opener assembly. This
may help improve transmitting and/or
receiving signals.
iCertain types of garage door openers are in-
compatible with the integrated remote control. If
you should experience further difficulties with
programming the integrated remote control,
contact an authorized Mercedes-Benz Center, or
call Mercedes-Benz Customer Assistance Cen-
ter (in the USA only) at 1-800-FOR-MERCedes, or
Customer Service (in Canada) at
1-800-387-0100.
iUSA only:
This device complies with Part 15 of the
FCC Rules. Operation is subject to the following
two conditions:
(1) This device may not cause harmful interfer-
ence, and
(2) this device must accept any interference re-
ceived, including interference that may
cause undesired operation.
Any unauthorized modification to this device
could void the user’s authority to operate the
equipment.
iCanada only:
This device complies with RSS-210 of Industry
Canada. Operation is subject to the following
two conditions:
(1) This device may not cause interference, and
(2) this device must accept any interference re-
ceived, including interference that may
cause undesired operation of the device.
Any unauthorized modification to this device
could void the user’s authority to operate the
equipment.
ProCarManuals.com

700 Index
Emergency operations
Locking the vehicle 635
Mechanically releasing
the electronic parking brake 637
Releasing from inside 464
Remote door lock 489
Remote door unlock 489
Tilt/sliding sunroof 638
Unlocking the trunk 636
Unlocking the vehicle 635
Emergency Tensioning Device see ETD
Emergency, In case of
Battery, Jump starting 660
First aid kit 632
Flat tire 649
Fuses 667
Roadside Assistance 16
Roadside Assistance (Tele Aid) 485
Towing the vehicle 663
Emission control 507
Emission control information label 675
Emission control system warranties 14Engine
Belt layout 676
Cleaning 556
Compartment 512
Coolant 518, 685, 689
Malfunction indicator lamp 31, 570
Number 674, 675
Oil 516, 684, 686
Oils 513
Residual heat and ventilation 460
Starting 378
Technical data 677
Turning off 387
Engine coolant see Coolant
Engine oil 513
Adding 516
Additives 686
Checking level 513
Checking level (Dipstick) 516
Checking level (Instrument
cluster control system) 514
Consumption 513Dipstick 516
Filler neck 516, 517
Messages in display 515, 623
Recommended engine oils
and oil filters 684
ESP
®69
Messages in display 594, 605
Warning lamp 31, 567, 572
ETD 55
Safety guidelines 44
Exterior lighting
Delayed switch-off (COMAND) 235
Locator lighting (COMAND) 236
Exterior rear view mirrors
Adjusting 353
Auto-dimming
on the driver’s side 355
Fold in automatically when locking
(COMAND) 237
Lower mirror when reversing
(COMAND) 237
Power folding 354
ProCarManuals.com

703 Index
I
Identification labels 674
Identification Number, Vehicle (VIN) 675
Ignition 336, 338
Switching on 336
Switching on, KEYLESS-GO* 338
Immobilizer 77
Indicator lamps see
Lamps, indicator and warning
Individualization
Voice Control 320
Infant and child restraint systems
see Children in the vehicle
Infrared reflecting windshield 496
Inside door handle 333
Instrument cluster 30, 402
Coolant temperature gauge 31, 403
Fuel gauge 31
Illumination 402, 448
Lamps 566
Multifunction display 256
Outside temperature indicator 404
Selecting the language
(COMAND) 231Interior lighting 369
Activating automatic control 370
Ambient lighting (COMAND) 240
Deactivating automatic control 370
Delayed switch-off (COMAND) 241
Reading lamps in the front 370
Interior rear view mirror
Adjusting 353
Auto-dimming 355
Interior storage spaces see
Storage compartments
J
Jack 633, 650
Jacking up the vehicle 650
Jump starting 660K
Key, Mechanical 635
Loss of 332
Key, SmartKey 322
Battery check lamp 322, 325
Factory setting 324
Global locking and unlocking 324
Lock button 322
Locking and unlocking 322
Loss of 332
Messages in display 615
Opening button for trunk 322
Panic button 63
Remote control 322
Restoring to factory setting 325
Selective setting 325
Starting the engine 379
Switching on ignition with 336
Turning off engine 387
Unlock button 322
ProCarManuals.com

704 Index
Key, SmartKey with KEYLESS-GO* 326
Battery check lamp 326, 330
Factory setting 329
Global locking and unlocking 330
Important notes
on using KEYLESS-GO* 328
Lock button 326
Locking and unlocking 326
Locking using the lock button
on door or on trunk lid 331
Loss of 332
Messages in display 614
Opening button for trunk 326
Panic button 63
Remote control 326
Restoring to factory setting 331
Selective setting 330
Starting the engine 379
Switching on ignition with 338
Turning off engine 388
Unlock button 326
Kickdown 396
Kilopascal 545
Knee bag 46L
Labels 674
Certification 674
Emission control information 675
Tire and Loading Information 524
Vacuum line routing diagram 675
Lamp bulbs, exterior 641
Lamps, exterior
Front 642
Light sensor 617
Rear 642
Lamps, indicator and warning
ABS 31, 64, 566
Air bag Off 46
Battery check lamp (SmartKey
with KEYLESS-GO*) 330
Battery check lamp (SmartKey) 325
Brake warning lamp 31
Brakes 567
Combination low tire pressure*
malfunction telltale 31, 576
Distance warning lamp* 31, 572
DISTRONIC Plus* 31, 414, 572
Electronic parking brake 31, 568
Engine diagnostics 31, 570
Engine malfunction 31, 570ESP®31, 567, 572
Front passenger front
air bag off 50, 578
Fuel reserve 573
High beam headlamp 31
Maintenance service indicator 551
Park Assist* 31
Parktronic* 31
Seat belt telltale 31, 573
SRS 31, 575
TPMS* malfunction telltale 31, 576
Turn signals 31
Language (COMAND) 231
LATCH-type child seat anchors
see Children in the vehicle
Lever
For automatic transmission
(gear selector lever) 389
For cruise control 406
For DISTRONIC Plus* 417
License plate lamps
Messages in display 619
Replacing bulbs 642
Light alloy wheels, Cleaning 563
ProCarManuals.com

709 Index
Product information 13
Production options weight 546
Program mode see
Automatic transmission,
Automatic shift program
Program mode selector switch
Automatic shift program 399
Proper use of the vehicle 20
PSI 546
Push-start see Tow-startR
Radio
FM/AM operation (COMAND) 95
Saving stations, FM/AM
(COMAND) 98
Selecting satellite radio channel
(Instrument cluster
control system) 264
Selecting stations 263
Submenu overview, FM/AM
(COMAND) 95
Switching wavebands, FM/AM
(COMAND) 96
Tuning in stations/channels 96
Voice Control 299
Radio transmitters,
control and operation 506
Range (distance to empty) 261
Reading lamps in the front 370
Rear fog lamp
Replacing bulbs 642
Rear lamps see Tail lampsRear seats
Adjustment 339
Folding back and placing
upright rear head restraints 349
Head restraints 348
Ventilation* 347
Rear side windows
Blocking operation 62
Rear view mirrors see Mirrors
Rear window defroster 457
Activating 457
Deactivating 457
Recommended inflation pressure 546
Recovery services,
Stolen vehicle (Tele Aid) 490
Refrigerant, Air conditioning 685, 686
Refueling 509
Regular checks 511
Remote
Door lock with Tele Aid 489
Door unlock with Tele Aid 489
Remote control,
SmartKey 322
Remote control,
SmartKey with KEYLESS-GO* 326
ProCarManuals.com

712 Index
SRS 53
Indicator lamp 31, 575
Messages in display 626
Standing water, Driving through 505
Starter battery 657
Starter switch 336
Positions 336
Starting difficulties, Engine 380
Starting, Engine 378
Steering column 351
Steering wheel
Adjustment 351
Cleaning 563
Easy entry/exit feature 344
Heated steering wheel* 352
Power steering fluid 685
Steering wheel gearshift control
Automatic transmission 400
Stolen Vehicle Recovery services 490
Storage compartments 469
Cup holder 473
Front armrest 470
Parcel net 471
Rear armrest 472
Storage compartment
in front armrest 470Storage tray/telephone*
compartment in front armrest 470
Under the front seats 471
Storing tires 522
Summer opening feature 376
Sun visors 476
Sunroof see Power tilt/sliding sunroof
Sunshades
Extending or retracting rear window
sunshade (COMAND) 242
Suspension tuning
Setting (ABC) 429
Symbols used
in this operator’s manual 19
System settings (COMAND)
Bluetooth
® settings 232
Display 227
Favorite button 231
Menu overview 227
Reset 234
Setting the system language 231
Time settings 227
Voice Control settings
(COMAND) 229T
Tachometer 403
Overspeed range 403
Tail lamps
Cleaning lenses 558
Messages in display 621
Tar stains 555
Tele Aid 482
Automatic Maintenance Call 490
Call priority 488
Emergency calls 483
Hands-free microphone 37
Information 487
Information button 485
Initiating an
emergency call manually 485
Messages in display 628
Remote door lock 489
Remote door unlock 489
Roadside Assistance 486
Roadside Assistance button 485
SOS button 485
Stolen Vehicle
Recovery services 490
System self-check 483
ProCarManuals.com