belt MERCEDES-BENZ CLS 2014 Owner's Manual
[x] Cancel search | Manufacturer: MERCEDES-BENZ, Model Year: 2014, Model line: CLS, Model: MERCEDES-BENZ CLS 2014Pages: 382, PDF Size: 4.7 MB
Page 60 of 382

Beltheight adjustment
Youcan adjustthe seat belt height on the
front seats. Adjust the belt toaheight that
allowsthe upper part of the seat belt to be
routed across the center of your shoulder.
XTo raise:slide the belt sash guide upwards.
The belt sash guide engages in various
positions.
XTo lower:press and hold belt sash guide
release .
XSlide the belt sash guide downwards.
XRelease belt sash guide release and
make sure that the belt sash guide has
engaged.
Releasing seat belts
!Make sure that the seat belt is fully rolled
up. Otherwise, the seat belt or belt tongue
will be trapped in the door or in the seat
mechanism. This could damage the door,
the door trim panel and the seat belt.
Damaged seat belts can no longer fulfill
their protective function and must be
replaced. Visitaqualified specialist
workshop.
XPress release button !on belt buckle $.
XGuidebelt tongue to belt sash
guide .
Belt warning for the driver and front
passenger
Regardless of whether the driver's and front-
passenger seat belts have already been
fastened, the seat belt warning lamp
lights up for six seconds each time the engine
is started. It then goes out if the driver and
the front passenger have already fastened
their seat belts.
If the driver's seat belt is not fastened when
the engine is started, an additional warning
tone will sound. This warning tone stops after
amaximum of six seconds or once the
driver's seat belt is fastened.
If after six seconds, the driver or front
passenger have not fastened their seat belts
and the doors are closed:
Rthe seat belt warning lamp remains lit
as long as the driver's or front-passenger's
seat belt is not fastened
and
Rifavehicle speed of 15 mph (25 km/h) is
exceeded, the seat belt warning lamp
begins to flash.Awarning tone also sounds
withincreasing intensityforamaximum of
58Occupant safety
Safety