MERCEDES-BENZ E-Class 2004 W211 Comand Manual
Manufacturer: MERCEDES-BENZ, Model Year: 2004, Model line: E-Class, Model: MERCEDES-BENZ E-Class 2004 W211Pages: 168, PDF Size: 2.28 MB
Page 31 of 168
30 At a glanceQuick reference COMANDSetting balance/fader
Open the main menu of the appropriate
operating mode (
page 25).
Press the Bal/Fad soft key.
The Balance/Fader menu is displayed.
Now you can set the balance and the
fader (
page 30).
A cross-hair cursor appears. The verti-
cal line indicates the balance setting.
The horizontal line indicates the fader
setting.
Press or :
The cursor moves horizontally, adjust-
ing the desired balance,
or
Press or :
The cursor moves vertically, adjusting
the fader.
Storing new settings:
Press or the Back soft key,
or
wait until the display changes.For the following operating modes, differ-
ent settings for bass and treble can be se-
lected:
Radio (FM waveband)
Radio (AM waveband)
Radio (Weather Band)
Single CD
CD changer*
AUX
Satellite radio*
Navigation*
Bass and treble settings for navigation an-
nouncements are found under “Adjusting
the acoustics for navigation announce-
ments” (
page 99).
When adjusting bass or treble, the system
automatically stores the setting for the
currently active operating mode.
i Using and , the cursor can be
moved simultaneously in vertical and
horizontal direction (diagonally).
Bass and treble
Page 32 of 168
31 At a glance
Quick reference COMAND
Setting bass and treble
Open the main menu of the appropriate
operating mode (
page 25).
Press the Bass or Treble soft key.
The Bass or Treble menu appears.
Storing new settings:
Press or the Back soft key,
or
wait until the display changes.If the vehicle is equipped with a sound sys-
tem*, the sound functions are available for
the following operating modes:
Radio
Single CD
CD changer*
AUX
Satellite radio*
Different sound functions* can be activat-
ed for each one of the operating modes
listed above.
Example:
For CD mode: the LOGIC7 Surround func-
tion,
for Satellite radio* mode: the Speech
function.The following sound functions are avail-
able:
Default Settings:
Resets the sound functions* to the fac-
tory setting.
Standard:
Normal stereo playback.
Speech:
Playback optimized for speech compre-
hension.
LOGIC7 Surround:
7-channel-surround playback (not for
mono-sources like AM waveband or
Weather Band in radio mode).
Switching sound functions* ON
Open the main menu of the appropriate
operating mode (
page 25).
Press the Sound soft key.
Sound functions*
Page 33 of 168
32 At a glanceQuick reference COMAND
The Sound menu appears.
Use or to select the desired
function.
Press.
The function is switched ON.iYour harman/kardon® audio system
features the innovative LOGIC7®
multi-channel surround sound technol-
ogy developed for the professional re-
cording industry.
iBy selecting the “LOGIC7 Surround”
function, LOGIC7® will be activated.
LOGIC7® converts any 2-channel ma-
terial into breathtaking multi-channel
surround sound and that without the
unnatural interpretation of many of to-
day’s surround sound techniques.
LOGIC7® is not an artificial “effects”
button. It automatically adapts itself to
the incoming source material, adjust-
ing the seven outputs based on the
original acoustic intent of the studio
master.
harman/kardon LOGIC7® creates a
true 360-degree “enveloping” sound-
field with a maximum “audio sweet-
spot” for all passengers.
harman/kardon LOGIC7® sets a new
benchmark in musical clarity and sepa-
ration, giving the listener the impres-
sion of actually “being there”.
iLOGIC7® playback works with all con-
ventional stereo audio sources (e.g.
stereo CD or stereo radio).
If the radio reception is poor, the sys-
tem should be switched back to Stan-
dard stereo playback. Switching back
to Standard stereo playback may im-
prove reception quality.
Page 34 of 168
33
Audio main menu
Radio operation
Single CD operation
CD changer* operation
Audio AUX operation
Audio
Page 35 of 168
34 AudioAudio main menu
Press
.
The Audio main menu appears.
If one of the Audio submenus ap-
pears, press the Back soft key as
often as necessary until the Audio
main menu appears,
or
Press
again.Various audio sources can be selected in
the Audio main menu.
Radio soft key
Station settings for WB, FM, and AM
wavebands appear (
page 35)
CD softkey
The Single CD main menu appears
(page 44)
CDC softkey
The CD changer* main menu appears
(page 54)
AUX soft key
Facilitates operation of an external au-
dio source (
page 60)Switching the mute function ON:
Press .
The system is switched to mute.
Switching the mute function OFF:
Press again,
or
Turn the rotary control located on
the COMAND control unit,
or
Pressæ or ç on the multifunc-
tion steering wheel.
The audio source heard is the one se-
lected before the mute function was
activated.
Opening the Audio main menu
Selectable soft keysiThe Satellite Radio menu is accessed
by pressing (
page 61).
Mute functioniThe mute function is still activated if
the system is switched off and then on
again.
Page 36 of 168
35 Audio
Radio operation
Radio operation
Open the Audio main menu
(page 34).
Press the Radio soft key.
The Radio main menu appears. The sta-
tion last tuned to will begin to play. In this example:
Weather Band
Channel 1 = current station
Press the FM/AM soft key in the Radio
main menu.
Alternatingly the Radio main menu for
the FM or AM wavebands appears. The
station last tuned to will begin to play.The waveband is indicated in the center
of the status bar.
In this example:
FM = FM waveband
1 = selected station is stored on
preset 1
Warning
G
In order to avoid distraction which could
lead to an accident, the driver should enter
system settings with the vehicle at a stand-
still and operate the audio system only when
road, weather and traffic conditions permit.
Bear in mind that at a speed of just 30 mph
(approximately 50 km/h), your vehicle is
covering a distance of 44 feet (approximate-
ly 14 m) every second.Switching to radio mode
Switching wavebands
Page 37 of 168
36 AudioRadio operation
The following options are available:
Tuning via station search (
page 36).
Tuning via station presets (
page 37).
Tuning via Autostore presets
(page 37).
Tuning via scan search (
page 38).
Manual tuning (
page 38).
Tuning via direct frequency input
(page 39).
Tuning via station search
On COMAND control unit:
Switch to the desired FM or AM wave-
band (
page 35).
Press or :
The next receivable ascending frequen-
cy is tuned in and begins to play,
or
Press or :
The next receivable descending fre-
quency is tuned in and begins to play.
On multifunction steering wheel:
Switch the multifunction display in the
instrument cluster to the radio display
(page 23).
Pressj:
The next receivable ascending frequen-
cy is tuned in and begins to play,
or
iThe wavebands cover different fre-
quency ranges:
FM broadcast band:
FM (VHF = very high frequency)
87.7 - 107.9 MHz
Tuning increments 0.2 MHz
AM broadcast band:
MW (medium wave)
530 - 1710 kHz
Tuning increments 10 kHz
WB waveband:
WB (Weather Band)
162.400 - 162.550 MHz
Tuning increments = 1 channel
Tuning to a FM / AM station
Page 38 of 168
37 Audio
Radio operation
Pressk:
The next receivable descending fre-
quency is tuned in and begins to play.
Tuning via station presets
Ten presets each are available for FM and
AM. The presets are accessed using the
number keypad, or via the Memory menu.
Accessing via number keypad:
Switch to the desired waveband
(page 35).
Press one of the number keys
- :
The system tunes to the station stored
under this number.
Accessing via Presets menu:
Switch to the desired waveband
(page 35).
Press the Presets soft key.
The Presets menu appears.
Use , , or to choose a
preset and press,
or
Press one of the number keys
- .
The system tunes to the station stored
under this No.
Tuning via Autostore presets
The Autostore function allows placing of
stations into the presets sorted by recep-
tion quality (
page 41). The system will store the station with the
strongest signal in preset 1.
Ten presets each are available for FM and
AM.
Switch to the desired waveband
(page 35).
Press the Autost. soft key.
The Autostore preset list appears. It
can take several seconds until all fre-
quencies are displayed.
Page 39 of 168
38 AudioRadio operation
Use , , or to choose a
preset and press.
or
Press one of the number keys
- .
The system tunes to the station stored
under this number.
Tuning via scan search
Scan search is characterized as follows:
Scan search plays each receivable sta-
tion for approx. 8 seconds.
Scan search can be ended manually.
The scan search automatically stops at
the station listened to before the scan
search was started.
Starting scan search
Switch to the desired waveband
(page 35).
Press the Scan soft key.
Scanning begins.
Ending Scan search manually
Press the Scan soft key again.Manual tuning
Switch to the desired waveband
(page 35).
Press or to scroll up or
down. Press and hold the button for at
least 2 seconds.
Manual tuning is activated.
Keep the button pressed or release it
and keep tapping it in quick succes-
sion.
The frequency will change by the tuning
increments for the respective wave-
band each time the button is pressed
or for as long as the button is pressed
and held.
Manual tuning is deactivated if the but-
ton is not pressed for approx. 3 sec-
onds.
iScan search performs two runs.
During the first run, stations with ex-
tremely good reception are played.
During the second run, stations with
weaker reception are played.
Page 40 of 168
39 Audio
Radio operation
Tuning via direct frequency input
Entry example:
98.5 MHz in FM waveband
Switch to the FM waveband
(page 35).
Press.The frequency input display appears.
The frequency range of the FM wave-
band is shown.
Press the number buttons in
succession:, , and .
Each number entered appears in the
display.
The system tunes to the frequency en-
tered (in this example: 98.5 Mhz).
The FM menu appears with a brief de-
lay.Tuning via station search
Seven channels are available on the
Weather Band.
Tuning using COMAND control unit
Switch to the WB waveband by press-
ing the WB soft key in the Radio main
menu (
page 35).
iManual tuning is also possible in all
wavebands by pressing or .
The frequency will change by the tuning
increments for the respective wave-
band each time one of the buttons is
pressed.
Frequency increments for manual
tuning:
FM 0.2 MHz
AM 10 kHz
iEntries outside the frequency range are
not possible.
Within the AM waveband, the input is
restricted to frequencies within the re-
spective frequency increment, which
is10 kHz.
The system will select the nearest valid
frequency if a frequency outside the
frequency increment is entered.Tuning to a station on Weather Band