key MERCEDES-BENZ E-CLASS CABRIOLET 2010 Repair Manual
[x] Cancel search | Manufacturer: MERCEDES-BENZ, Model Year: 2010, Model line: E-CLASS CABRIOLET, Model: MERCEDES-BENZ E-CLASS CABRIOLET 2010Pages: 333, PDF Size: 7.64 MB
Page 138 of 333
Key positions
Key g
To remove th ekey
1 Powe rsupply for some consumers, such
as the windscreen wipers.
2 Ignition (power supply for all consumers)
and drive position
3 To start the engine
i The key can be turned in the ignition lock
even if it is not the correc tkey for the vehi-
cle. The ignition is then not switched on.
The engin ecannot be started.
KEYLESS-GO Pressing the Start/Stop button several times
in succession corresponds to the different
key positions in the ignition lock. This is only
the case if you are not depressing the brake
pedal.
If you depress the brake pedal and press the
Start/Stop button ,the engin estart simmedi-
ately. X
Position 0:ifStart/Sto pbutton :has not
yet been pressed, this corresponds to the
key being removed from the ignition.
X Position 1:pressStart/Sto pbutton :.
You can now activat ethe windscreen wip-
ers, for example.
i If you then open the driver's door when in
this position ,the power supply is deactiva-
ted.
X Position 2(ignition): press Start/Stop but-
ton :twice.
i If you press Start/Stop button :once
when in this position and the driver's door
is open, the power supply is deactivated
again.
Removing th eStart/Stop button
You can remove the Start/Stop butto nfrom
th ei gnition lock and star tthe vehicle as nor-
ma lusing the key.
i You do not hav etoremov ethe Start/Stop
button from the ignition lock when you
leav ethe vehicle. X
Remove Start/Stop button :from ignition
lock ;.
i When you inser tthe Start/Stop button
int ot he ignition lock ,the system needs
2s econds recognition tim ebefor eyou can
use the Start/Stop button. Driving
135Driving and parking
BA 207ECE ÄJ 2010/1a; 1; 2, en-GB
mkalafa Version:3.0.2.11
2010-01-26T13:03:22+01:0
0-Seite 135 Z
Page 139 of 333
Sta
rting the engine
Impor tant safety instructions G
Risk of poisoning
Never leav ethe engin erunning in enclosed
spaces .The exhaust gases con tain carbon
monoxide. Inhaling exhaust fumes consti-
tutes ahealth hazar dand could lead to loss
of consciousness or even death.
! Do not depress the accelerator pedal
whe nstartin gthe engine.
Manua ltran smission X
Depress the brake pedal and keep it
depressed.
X Fully depress the clutch pedal.
X Shif tton eutral N.
i You can only star tthe engin ewhen the
clutc hpedal is fully depressed.
Automa tict ran smission X
Shif tthe transmission to position P.
i You can also star tthe engin ewhen the
transmission is in position N.
Sta rting procedur ewith the key X
To star tapetrol engine: turn the key to
position 3in the ignition lock
(Y page 135 )and releas eita ss oon as the
engin eisrunning.
X To star tadiesel engine: turn the key to
position 2in the ignition lock
(Y page 13 5).
The % preglow indicator lam pinthe
instrumen tcluster lights up.
X When the %preglow indicator lamp
goes out, tur nthe key to position 3
(Y page 135) and release it as soon as the
engin eisrunning.
i You can start the engine without preglow
if the engine is warm. i
Vehicles with automatic transmis-
sion: you can also use the touch-star tfunc-
tion. To do this, turn the key to position
3(Y page 135 )and releas eitimmediately.
Th ee ngine then starts automatically.
Starting the engine usin gKEYLESS-GO G
Risk of injury
Your vehicle can be started using avalid KEY-
LESS-GO key. For this reason, children should
never be left unsupervised in the vehicle.
Always take the key with you when leaving the
vehicle, even if you are only leaving it for a
short time.
i The Start/Stop button can be used to
start the vehicle manually without inserting
the key in the ignition lock. This mode for
startin gthe engin eoperates independently
of the ECO start /stop automatic engine
start function.
X Depres sthe brake pedal and keep it
depressed.
X To sta rtap etrol engine: press the Start/
Stop button (Y page 135) once.
The engin estarts.
X To start adiesel engine: press the Start/
Stop button (Y page 135)once.
Preglow is activated and the engin estarts. Pulling away
Manual transmission X
Depress the brake peda land keep it
depressed.
X Fully depress the clutch pedal.
X Shift to either first gea rorreverse gear R.
X Release the parkin gbrake (Y page 153).
X Releas ethe brake pedal.
X Slowly release the clu tchpedal and gently
depress the acc elerator pedal.136
Dr
ivingDriving and parking
BA 20 7ECE ÄJ 2010/1a; 1; 2, en-GB
mkalafa Version:3.0.2.11
2010-01-26T13:03:22+01:0
0-Seite 136
Page 141 of 333
Vehicles with manual transmission
X
Shift to eithe rfirst or reverse gear R.
X Turn the key to position 0in the ignition
lock and remove it.
The immobiliser is activated.
X Apply the parkin gbrake firmly.
Vehicles with automati ctransmission X
Shift the transmission to position P.
With the key
X Turn the key to position 0in the ignition
lock and remove it.
The immo biliserisa ctivated.
X Apply the parking brake firmly.
i Thek ey can only be removed if the trans-
mission is in position P.
Usin gKEYLESS -GO
X Press the Start/Sto pbutton (Y page 135).
The engine stop sand al lthe indicator
lamps in the instrument cluster go out.
X Apply the parkin gbrake firmly.
i Thee ngine can be turne doff whil ethe
vehicle is in mot ionb ypress inga nd holding
the Start/Sto pbutton for thre eseconds. EC
Os tart/sto pfunction
Gen eral notes i
TheE CO start/stop function is only avail-
abl efor the E200 CG IBlueEFFICIENCY
model with manu altransmission.
The ECO start/sto pfunction switches the
engine off automatically in certain situations.
The engine starts automatically whe nyou pull
away again.
The ECO star t/stopfunction thereby helps
you to reduce the fuel consumption and emis-
sions of your vehicle. The ECO start/stop function is activated each
time the engine is switched on. The system is
operational when ECO symbol
:is shown in
the multifunction display.
! Always switch the ignition off and take the
key with you when leaving the vehicle.
Automatic engin eswitch-off The ECO start/stop function switche
soff the
engine automatically if you:
R apply th ebrake and bring th evehicle to a
standstill
R operat ethe clutc hpedal R
engage neutral N(follow gearshif tinstruc-
tion ;to engage neutral N,ifnecessary)
R release the clutch pedal
The engine is only switched off if:
R the outside temperature is within the range
which is suitabl efor the system.
R the engin eisatnormal operatin gtemper-
ature.
R the set temperature for the vehicle interior
has been reached. 138
DrivingDriving and parking
BA 20
7ECE ÄJ 2010 /1a; 1; 2, en-GB
mkalafa Version: 3.0.2.11 2010-01-26T13:03:22+01:00 -Seite 138
Page 143 of 333
Problems wit
hthe engine Problem Possible causes/consequences and
M Solutions
Th
ee ngine doe snot
start. The HOL
Dfunction or DISTRONIC PLUS is activated.
X Deactivat ethe HOL Dfunction (Y page 172)orDISTRONIC
PLUS (Y page 160).
X Try to start th eengine again. The engine doe
snot
start. The starter motor
can be heard. R
There is amalfunction in the engine electronics.
R There is amalfunction in the fuel supply.
R The on-board voltage is too low because the starter battery is
too weak or discharged.
X Before attempting to start the engine again, turn the key in the
ignition back to position 0or press the Start/Stop button
repeatedly until all indicator lamps in the instrumen tcluster go
out.
X Try to star tthe engin eagain (Y page 136). Avoid excessively
long and frequen tattempt stostart the engine as thes ewill drain
the battery.
If the engine does not start after several attempts:
X Consult aqualified specialist workshop. The engine does not
start
.The starter motor
can be heard. The
reserve fuel warning
lam pisl it and the fuel
gauge displa yshows 0. The fuel tan
kise mpty.
X Refue lthe vehicle. The engin
edoes not
start. You cannot hear
the starter motor. The on-boar
dvoltage is too low because the starter battery is too
weak or discharged.
X Jump-start the vehicle (Y page 289).
If the engin edoes not star tdespite attempt stojump-start it:
X Consult aqualified specialist workshop. The starter motor was exposed to
athermal load that was too high.
X Allo wthe starter motor to cool down for approximatel ytwo
minutes.
X Try to start the engine again.
If the engine still does not start:
X Consult aqualified specialist workshop. 140
DrivingDrivin
gand pa rking
BA 20 7ECE ÄJ 2010 /1a;1;2,e n-GB
mkalafa Version: 3.0.2.11 2010-01-26T13:03:22+01:00-Seite 140
Page 146 of 333
Transmission position and driv
epro-
gram display :
Transmission positio ndisplay
; Drive program display (E/S)or(E/S/M)
The cur rent transmissio nposition and drive
program appear in the multifunction display. Transmission positions
B
Par
kposition
Prevent sthe ve hicle fr om rolling
away when stopped. Do not shift
the transmission int oposition P
unless the vehicle is stationary.
The key can only be removed if the
transmission is in position P.Ifthe
key is removed from the ignition
lock ,the selector lever is locked. C
Reverse
Only shift the transmission to
R
when the vehicle is stationary. A
Neu
tral
Do not shift the transmission to N
whil edriving. Otherwise, th eauto-
matic transmissio ncould be dam-
aged.
Releasing the brakes will allow you
to mov ethe vehicle freely, e.g. to
push it or tow it.
If ESP ®
is deactivated or faulty:
only shift the transmission to posi-
tion Nif the vehicle is in danger of
skidding, e.g. on icy roads. 7
Drive
The automatic transmission
changes gear automatically
.All
forward gears are available. Gearshifting
The automatic transmission shifts to the indi-
vidual gears automatically when it is in trans-
mission position D.This automatic gearshift-
ing behaviour is determined by:
R as hift range restric tion, if selected
R the selected drive program
E/S, E/S/M orM(Y page 144)
R the position of the accelerator pedal
R the roa dspeed Driving tips
Accelerator peda lposition Your style of drivin
ginfluences how the auto-
matic transmissio nshift sgear:
R littl ethrot tle: earl yupshifts
R mor ethrot tle: late upshifts
Double-clutch function E3
50 and E500 only: when shiftin gdown,
the double-clutch function is active regard-
less of the currently selected drive program.
The double-clutch function reduces load Automatic transmission
143Driving and parking
BA 20 7ECE ÄJ 2010/1a; 1; 2, en-GB
mkalafa Version: 3.0.2.11 2010-01-26T13:03:22+01:00-Seite 143 Z
Page 151 of 333
Problems wit
hthe transmission Problem Possible causes/consequences and
M Solutions
Th
et rans mission has
problem sshifting gear. The transmission is losing oil.
X
Hav ethe transmission chec kedataq ualified specialist work-
sho pimmediately. Th
ea cceleratio nability
is deteriorating.
The transmission no
longer changes gear. The transmission is in emergency mode.
It is only possible to shift into
2ndgear and reverse gear.
X Stop the vehicle.
X Shift the transmission to position P.
X Turn the key to position 0in the ignition lock or press the Star t/
Stop butto nrepeatedly until all indicator lamps in the instru-
men tcluster go out.
X Wait at least 10 seconds before restarting the engine.
X Shift the transmission to position Dor R.
If D is selected, the transmission shifts into 2ndgear; if Ris
selected, the transmission shifts into reverse gear.
X Hav ethe transmission chec kedataq ualified specialist work-
sho pimmediately. Releasin
gthe parking lock manually
In th eevent of an electrica lfault, it is possible
to release the selector lever lock manually to
move it out of position P,e.g. if you wis hto
tow the vehicle away. X
Depres sthe parkin gbrake firmly.
X Prise ou tselector lever gaiter :with aflat,
blunt object ,(e.g. ascrewdriver wrappe dinclot
h)from th eright-hand edge, pulling it
up and out.
X Pres sreleas ebutton ;dow nand simul-
taneousl ymove the select or lever ou tof
position P.
The selector lever can now be moved freely
unti litisr eturnedtop osition P. Refuelling
Important safet
ynotes G
Risk of explosion
Fuel is highly flammable. Fire, naked flames
and smoking are therefore prohibited when
handling fuels.
Switc hoff the engine before refuelling. G
Ris
kofi njury
Do not com einto contact with fuels. 148
RefuellingDriving and parking
BA 207 ECE ÄJ 2010/1a; 1; 2, en-GB
mkalafa
Version: 3.0.2.11 2010-01-26T13:03:22+01:00-Seite 148
Page 153 of 333
engin
edamage and damage to the exhaust
system.
Do not use the following:
R marine diesel
R heating oil
R bio-diesel
R vegetable oil
R petrol
R paraffin
R kerosene
Do not mix these fuels with diese lfuels and
do not use any special additives. Other-
wise, this can lead to damage to the engine.
This excludes flow improver ,see "Low out-
side temperatures".
! When refuellin gusing afuel can, use afil-
ter or use aclean clot hasafilter. Other-
wise, particles from the fuel can may block
the fuel lines and/or the diesel injection
system.
For further information on "Fuel", see
(Y page 313).
Low outsid etemperatures Diesel fuel with improved cold flow qualities
is available during the winter months. In
Europe, various climate-dependent low-tem-
perature classes are defined in EN 590. Refu-
elling with diesel fuel which complies with the
climatic specification sofstandard EN 590
can hel ptoprevent operatin gproblems. At
exceptionall ylow tempera tures, it is possible
that the flow properties of the fuel ma ybe
inadequate. This is also the case for fuel that
has not been adapted to the climatic specifi-
cations ,e.g. diese lfuel for warmer areas.
i Further information about country-spe-
cific fuel properties can be obtained from
oil companies, e.g. at filling stations.
Flow improver Flow improvers can be added to improve the
cold resistance of diesel fuel. The effective- ness of
aflow improver is not guaranteed with
every fuel.
Correc tdosage and thorough mixing ar edeci-
sive factor sinensuring improvement in low-
temperature resistance. Under certain cir-
cumstances, an excessive dosage may
actually decreas elow-temperatur eresist-
anc eand should therefor ebeavoided. Follow
th em anufacturer's dosing instructions.
Mix the additive with the diese ling ood time,
befor ethe flo wproperties of th ediesel
become inadequate. Malfunction scan other-
wise only be rectified by heating the entire
fuel system, e.g. by parking the vehicle in a
heated garage.
Observe the information provided by the man-
ufacturer when using aflow improver. Only
use flow improvers that have been tested and
approved by Mercedes-Benz. You can obtain
further infor mation from any Mercedes-Benz
Servic eCentre. Refuelling
Fuel filler flap The fuel filler fla
pisunlocke dorlockedauto-
matically when you open or close the vehicle
with the key or using KEYLESS-GO.
The position of the fuel filler flap is to the rear
on the right. The position of the fuel filler cap
is displayed in the instrument cluster 8.
The arrow next to the filling pump indicates
the side of the vehicle. 150
RefuellingDrivin
gand pa rking
BA 20 7ECE ÄJ 2010 /1a; 1; 2, en-GB
mkalafa Version: 3.0.2.11 2010-01-26T13:03:22+01:00 -Seite 150
Page 155 of 333
Problems wit
hthe fuel and fuel tank Problem Possible causes/consequences and
M Solutions
Fue
lisl eakin gfrom the
vehicle. G
Ris
kofe xplosion or fire
The fuel line or the fuel tan kisd efective.
X Turn the key to position 0(Ypage 135) in the ignition lock
immediately and remove it.
X Do not restart the engine under any circumstances.
X Consult aqualified specialist workshop. The fuel filler flap can-
not be opened. The fuel filler flap is not unlocked.
or
The key batteries are discharged.
X
Unlock the vehicle (Y page 66).
or
X Unlock the vehicle using the emergency key element
(Y page 67). The fuel filler flap is unlocked, but the opening mechanism is jam-
med.
X
Consult aqualified specialist workshop. The fuel tank in
adiesel
engine vehicle has
been run completely
dry and the engine will
not start. There is air in the fuel system.
X
Refuel the vehicle with at least 5litres of diesel.
X Turn the ignition on for at least 10 seconds. Turn the key to
position 2(Ypage 135 )inthe igni tion lock.
X Star tthe engine continuously for up to 10 seconds until it runs
smoothly.
or
X Star tthe engine via the touch-star tfunction .Todothis, tur nthe
key to position 3(Ypage 135) in the ignition lock and then
release it immediately.
The fuel system is now free of air.
If the engin edoes not star t:
X Tur nthe ignition on again for at least 10 seconds. Tur nthe key
to position 2(Ypage 135) in the ignition lock.
X Star tthe engin eagain con tinuously for up to 10 seconds until
it runs smoothly.
or
X Start the engine agai nvia the touch-start func tion.
If the engin edoes not star tafter three attempts: 152
RefuellingDri
ving and parking
BA 207 ECE ÄJ 2010/1a; 1; 2, en-GB
mkalafa Version: 3.0.2.11 2010-01-26T13:03:22+01:00-Seite 152
Page 156 of 333
Problem Possible causes/consequences and
M Solutions
X
Consult aqualified specialist workshop. Parking
Important safety notes
G
Risk of accident
Only remove the key from the ignition lock
when the vehicle is stationary, as you cannot
steer the vehicle when the key is removed.
Never leave children unsupervised in the vehi-
cle. They could release the parking brake. This
could lead to aserious or fatal accident. G
Risk of fire
Make sure that the exhaust system does not
under any circumstances com einto contact
with easily ignitable material such as dry grass
or petrol .Otherwise, the flammable material
may ignite and set the vehicle on fire.
To ensure that the vehicle is secured against
rolling away unintentionally:
R the parking brake must be appl ied.
R on vehicles wit hmanual transmission,
engage first gear or reverse gear.
R on vehicles with automatic transmission,
the transmissio nmust be in position Pand
the key must be removed from the ignition
lock.
R on steep uphill or downhill gradients, turn
the front wheel stowards the kerb. Parking brake
X
To ap ply:depress parking brake ;firmly.
The J indicator lamp in the instrument
cluster lights up if the engine is running.
X To release: depress the brak epedal and
keep it depressed.
X Pull release handle :.
The J indicator lam pint he instrument
cluster goes out. Parking
153Driving and pa rking
BA 20 7ECE ÄJ 2010 /1a;1;2,e n-GB
mkalafa Version: 3.0.2.11 2010-01-26T13:03:22+01:00-Seite 153 Z
Page 179 of 333
Warning display for fron
tarea
: Left-hand side of th evehicle
; Right-hand side of the vehicle
= Segments
The warning display for each side of the vehi-
cle is divided into fiv eyellow and two red seg-
ments. PARKTRONI Cisoperational if yellow
segments =ligh tup.
The gear lever position or, in the case of
AUTOTRO NIC, the transmission position of
the automatic transmission determines
which warning display is active when the
engine is running.
Manual transmission: Gear lever posi-
tion Warning display
Forward
sgear
or
Neutral Fron
tarea activated Revers
egear Rear and fron
tareas
activated Auto
matic transmission: Transmission
position Warning display
D
Fron
tarea activated R
or N Rear and front areas
activated
P
No areas activated On
eorm ore segments light up as the vehicle
approaches an obstacle, depending on the
vehicle' sdistanc efrom th eobstacle.
From the:
R sixt hsegmen tonwards ,you will hea ran
intermitten twarnin gtonef or approx-
imately two seconds.
R seven thsegment onwards, you will hear a
warnin gtonef or approximately two sec-
onds. This indicates that you have now
reached the minimu mdistance.
Deactivating/activating PARKTRONIC :
Indicator lamp
; To deactivate/activate PARKTRONIC
If indicator lamp :lights up, PARKTRONIC is
deactivated. Parking Guidance is also deacti-
vated.
i PARKTRONIC is automatically activated
when you turn the key to position 2in the
ignition lock.
Trailer towing PARKTRONIC is deactivated for the rear area
when you establish an electrical connection
between your vehicle and
atrailer.
! Foldint he ball couplin gifthe trailer tow
hitc hisn ot required .PARKTRONIC meas-
ures the minimum detection range to an
obstacle from the bumper, not the ball cou-
pling. 176
Drivin
gsystemsDrivin gand pa rking
BA 20 7ECE ÄJ 2010 /1a; 1; 2, en-GB
mkalafa Version: 3.0.2.11 2010-01-26T13:03:22+01:00 -Seite 176