navigation MERCEDES-BENZ E-Class COUPE 2011 C207 Comand Manual

Opera
tingsafet y General
notes G
WARN
ING
An yalteration sof electr oniccompon entsor
soft ware cancause malfunct ions.
Radio, satellite radio,amplifier, DVDchanger ,
navigation module,telephon eand Voice
Contr olsystems areinter connect ed.
Therefor e,ifone ofthe compon entsis not
operation al,orhas notbeen removed/
replaced properly, thefunc tion ofother
compon entscould beimpaired.
Such conditions mightseriously impairthe
operatin gsafety ofyour vehicle.
We recom mendtohave anyservic ework on
electr oniccompon entscarried outbyan
authorize dMercedes- BenzCenter . G
WARN
ING
In order toavoid distrac tionwhich couldlead
to an acciden t,the driver should entersystem
sett ings while thevehicle isat astan dstill, and
operate thesystem onlywhen permitt edby
road, weather andtrafficcon ditions .
Bear inmind thatataspeed ofjust 30mph
(approximat ely50km/ h),your carcover sa
distanc eof 44 feet (approximat ely14m) every
secon d.
COMAND suppliesyouwith information to
help youselect yourroute moreeasily and
guide youconvenien tlyand safely toyour
destin ation. Forsafety reasons, we
enco urage thedriver tostop thevehicle ina
safe place before answering orplacing acall,
or con sulting theCOMAND screentoread
navigation almaps, instruct ions, or
downloaded information . G
WARN
ING
While thenavigation systemprovides
direct ionalassistanc e,the driver mustremain
focused onsafe driving behavior, especially
atten tiontotraff icand stree tsigns, and should
utilizethesystem’s audiocueswhile
driving.
The navigation systemdoesnotsupply any
infor mation onstop signs, yieldsigns, traffic
regulations ortraff icsafety rules.Their
observan cealway sremains inthe driver’s
personal responsibility.DVDmaps donot
cover allareas norallroutes withinanarea.
i Canada only:Thisdevice complies with
RSS- 210ofIndust ryCanada. Operation is
subject tothe following twoconditions :
1. This device maynotcause interferen ce,
and
2. this device mustaccept anyinterferen ce
received, includinginterferen cethat may
cause undesired operationofthe device.
An yunauthoriz edmodificat iontothis
device couldvoidtheuser's authorit yto
operate theequipment.
i USA only: Thisdevice complies withPart
15 ofthe FCC Rules. Operation issubject
to the following twoconditions :
1. This device maynotcause interferen ce,
and
2. this device mustaccept anyinterferen ce
received, includinginterferen cethat may
cause undesired operationofthe device.
An yunauthoriz edmodificat iontothis
device couldvoidtheuser's authorit yto
operate theequipment. G
WARN
ING
Change ormodificat ionnot express ly
approved bythe party respons iblefor
complianc ecould voidtheuser's authorit yto
operate thisequipment.
! Note: Thisequipment hasbeen tested
and found tocomply withthelimits fora
Class Adigital device,pursuan ttoPart 15
of the FCC Rules. Theselimitsaredesigned
to provide reasonable protectionagainst
harmful interference whentheequipment
is operated inacommer cialenviron ment.
This equipment generates,usesandcan 10
Introdu
ction

Funct
ion Pag
e G
PCMCI
Amemory cardeject
button 136
H
Ac
cept sa call 108
Dials
anumber 108
Redials 108
I
Reject
sa call 108
En
ds an active call 109
J
Calls
upthe system menu 29 Function Page
K
Mute 35
Switc
hesoffnavigation
announ cements 35
L
Calls
upthe telephon e
basic menu (telephon yvia
Bluetoot h®
int erface) 107
M
Switc
hestonavigation
mode 51
COMAND
controller Ex
ample
: COMAND controller
You canusetheCOMAND controller toselect
the menu itemsinthe COMAND display.
You cancallupmenus orlists, scroll through
menus orlists andexitmenus orlists. Operatin
gthe COMAND controller The
COMAND controller canbe:
R pressed brieflyorpressed andheld W
R turn edclock wiseorcount er-clockwise
cVd
R slid leftorright XVY
R slid forwards orback ZVÆ
R slid diagonally aVb
In the instruct ions, operatin gsequences are
described asfollows:
X Radio modeisactivat ed.
X Select Radio by
sliding VÆandturning
cVd theCOMAND controller andpress
W tocon firm.
X Confirm Station List by
pressing W.
The stationlistappears. 16
COMAND
operatingsystemAtaglance

COMAN
Ddis pla y
Disp layover view The
COMA NDdispl aysho wsthefun ction curren tlyselec teda nd itsassoci atedmenu s.The
CO MAND displ ayisdivid ed into severalar ea s.
The radio displ ayissho wninthe exampl e. :
Statu sba r
; Tocallup the audio menu
= Mainfunctio nbar
? Display/s electionw indow
A Radio menubar
St atus bar:shows thetimeand thecurr entsettings for radio andtelep honeoperat ion.
The main functions,navig ation,audio, telephoneand video feature additio nalmen us.This is
indic ated bytriangle ;.Thefollowing tableliststheavaila blemenu items.
Main functionbar =allow syou tocall upthe desired mainfunction.
In the example, theaudi omain functionisset toradio mode anddispla y/selection
window ?isactive.
Radi omenu barAallow syou tooperate theradio functions.
Menu overview The
table liststhemenus availableafter calling upthe main navigation, audio,telephone, video
or system functioninthe main functionbar. 18
COMAND
operatingsystemAtaglance

Funct
ion Pag
e =
?
Activate svoic e
co ntrol (see thesepar ate
oper atingins truct ions) ?
%Pr
essbriefly :back ,
can celsvoic eco ntrol and
hides displaymes sages
(see thesepar ateoper ating
ins truct ions) %Pr
essand hold :
sele ctsst and ard displ ay
(see vehicle Oper ator's
Man ual) A
=;
Callsupthe
men ubar inthe
mult ifunction displ ayand
sele ctsmen us 21
9:
Select s
subm enus inthe
mult ifunction displ ayor
sc roll sth roug hlist s 21
a
Toconfirm your
sele ction Ope
ratin gth emu ltifu nct ion displa y G
WAR
NING
A driv er'satt entio nto theroad must always
be his/ herprim aryfocuswhen driving.For
your safety andthesafety ofothers, we
recommen dthat youpull over toasafe
location andstop before placing ortaking a
telephone call.Ifyou choose touse the
telephone whiledriving, pleaseusethehands-
free device andonly usethetelephone when
weather, roadandtraffic conditionspermit.
Some jurisdiction sprohibit thedriver from
using amobile phonewhiledriving avehicle.
Bear inmind thatataspeed ofjust 30mph
(approximately 50km/ h),your vehic leis
cove ringadistan ceof44 feet (approxim ately
14 m)every second. X
To select amenu: pressth e=
or ; button.
X To select asubm enuorscrol lth rou gh
th elist :pres sth e9 or: button.
X To select thenext menu up:pres sth e
% button.
X To call upsta nda rddisp lays:repeat edly
pres sth e% buttonunt ilth eodom eter
and thetrip met erappear inthedisplay.
or
X Pres sand hold the% buttonunt ilth e
odom eterand the trip mete rappear inthe
display.
X To confirm yourselection: pressthe
a button.
X To confirm themessage: pressthe
a or% button. Menus
andsubm enus
The number ofmenus depends onthe vehicle
equipment . Menu Functions
andsubm enus Navigation Navigation
systemdisplays Audio Select
ingastat ion
Operatin gthe DVD chang er,
memor ycard, MUSIC
REGISTE R,Bluetoot h®
audio
and Media Interface
Operatin gvideo DVD Telephone Ac
cept ing/ rejec tingacall
Making /ending acall
Select ingaphone bookentry
Redialing Na
vigat ionsystem menu
Rout eguida nceinactive The
display showstheroad onwhich the
vehicle iscurren tlytrav eling, provided the
digital mapcontains it. Mult
ifunction steeringwheel
21Ataglance Z

E
COMAN D:e.g .toselect astation fromthe
presets, selectatrack ,direc tentry ,ph one
num berentry
Rea rSe at Entertai nmentSys tem: to
sel ect atrac k,direct entry
F Toexitame nu(ba ck)
X Point theremote controlatthe
correspond ingscreen andexecute the
functions bypressi ngthe correspondi ng
button.
i The remote control's functionmaybe
restricted depending onthe angle atwhi ch
it is pointed atthe respe ctivescreen. Sel
ecting thescree nfor the remote
co ntrol
X To sele ctthe COMAND display:turn
th umbwh eel=untilCOMAN Dis
high light edinthewin dow.
X To sele cttheleft -hand scree n(Rear Seat
En tertain men tSys tem): turnth umbw heel
= untilL REA Ris high lightedin the
win dow.
X To sele cttherig ht-hand scree n(Rear Seat
En tertain men tSys tem): turnth umbw heel
= untilREA RR is high lightedin the
win dow. Swit
chingth escr een on/of f
If th eSm artKey isin pos ition 0or 1in the
ign ition lock(see thevehicle Operator's
Manual ),or the SmartKey isnot inserted, the
screens inthe rear willswitch offafter 30
minutes. Beforethescreens switchoff,they
show amessage tothis effect.
You canswitch thescreens backon.
However, thiswilldischarge thestarter
battery. X
Point theremote controlatthe screen
which hasbeen selected forremote
operation.
X Press button :onthe remote control.
The respective screen(rearorCOMAND)
switches onoroff.
i You canonly switch thescreens onusing
the remote controlifthe ignition is
switched on. Switching
thebutton lighting on/off
X Press button ;onthe remote control.
Depending onthe previous status,the
button lighting isswitched onoroff.
i Ifyou donot use theremote controlfor
abou t15s econ ds,the button lighting
switch esoff automatic ally. Mut
e
This functionisavailable forCOMAND andfor
the Rear SeatEntert ainmen tSystem in
con junc tion with corded headphones.
X Press button Bonthe remot econ trol.
The sound isswitch edon/ off. Adju
sting thevolume
This functionisavailable forCOMAND andfor
the Rear SeatEntert ainmen tSystem in
con junc tion with corded headphones.
X Press oneofbutton sC onthe remot e
con trol.
The volume ofthe curren tlyselect edaudio
or video source changes .
For COMAND ,you can also adjust the
volume ofphone callsandnavigation
announ cements. Rem
otecontrol
25Ataglance Z

Funct
ionsoftheE and
F but
ton
You canusetherem oteco ntrol toexec ute thesame function sas theCOMA NDcontrol pan el.
The function sfor theRear Seat Entertainm entSys tem are desc ribedlat er (Y page 181). Mod
e Funct
ion Aud
iomod e Se
lec tsast ati on usin gth es tati onsearch functio n(Ypage 126) Select
sa trac kby skippin gto atrac k(Y page 140) Fast
forward/ rewind(Ypage 140) Video
mode Select
sa scen eor chapt er(video DVDmode) (Ypage 166) Fast
forwards/ rewinds(videoDVDmode) (Ypage 165) Functions
ofthe num berkeypa d
You canusetheremot econ trolto exec utethe same functionsas the COMAND controlpanel.
The func tionsfor the Rear SeatEntert ainmen tSyst emare described later(Ypage 181). Mode Function
Audio
mode Select
sstat ions viathe stationpreset s(Y page 126) Tunes
instat ions byent ering thefrequen cymanually (Ypage 126) St
ores stations manually (Ypage 126) Select
sa trac k(Y page 140) Select
sa data medium viathe media list(Ypage 139) Telephone
mode Telephone
numberentry(Y page 108) Character
entry En
ters charac ters(direct entry)(Ypage 31) Oper
ating COMAND Selecting
amainfunc tion
Ini tial situatio n You
wouldlike toswi tch from navigation
mode (addre ssentry menu) tothe system
settings, forexamp le.
X To switch onnavi gatio nmode: pressthe
Ø function button.
X To show themenu: pressW the COM AND
controll er. X
Sele ctDesti nation by
sliding VÆand
turning cVdtheCOM AND controll erand
pres sW toconfirm.
X Sele ctAddre ssEntry and
pres sW to
confirm.
The address entry menu appears. Operatin
gCO MAND
27Atagl anc e Z

Mute
Swi tching audioandvideo sourceson/
off X
Press the8 button onCOMAND oron
the multifunction steeringwheel.
The sound fromtherespe ctiveaudio or
vide osource isswi tched onormuted.
i When thesound isoff, thesystem
disp laysthe , icon inthe status line.
When youchange theaudio orvide o
source ,or adju stthe volu me, sound
au tomatica llyswi tches onaga in.
i You willstill heartraffic
announcements 2
and naviga tionsystem
announcements evenifthe sound ismuted.
Swi tching offallnavig ation
anno uncements X
Navigatio nannoun cements: pressthe
8 button duringthe announcement.
Swi tching navigation announcements
back on X
Press 8again.
i The naviga tionannouncements are
swi tched onaga inifyou start anew route
gui dance orifCOMAND isswi tched offand
on with theqcontrol knob. Adjusting
thevolume
Adjusting thevolume forthe audio or
video source X
Turn theqcontrol knob.
or
X Press theW orX button onthe
multi function steeringwheel.
The volumeofthe currently selected audio
or vide osource changes. You
canalsoadju stthe volu meforthe
foll owi ng:
R naviga tionannouncements
R phone calls
R Voice Control System voiceoutpu t(see the
separate operating instructions)
Adjusting thevolume fornavigation
announce ments During
anavigation announcement :
X Turn qthe cont rolknob.
or
X Press theW orX button onthe
multifunction steeringwheel.
Adjusting thevolume forphone calls You
canadjust thevolume forhands-free
mode during atelephone call.
X Turn theqcont rolknob.
or
X Press theW orX button onthe
multifunction steeringwheel. Adjusting
thesound settings
Callin gup the sound menu You
canmake various soundsettings forthe
different audioand video sources. Thismeans
that itis possible toset more bassforradio
mode thanforaudi oCD mode, forexample.
You cancallupthe respective soundmenu
from themenu ofthe desired mode.
The example describes howtocall upthe
sound menuinradio mode.
X Press the$ function button.
The radio displa yappea rs.You willhear the
last station playedon the last waveba nd.
2 Traffic program isnot availa bleinall countries. Basic
functions ofCOMAND
35Ataglanc e Z

Design Exp
lanation Day
Mode The
displayisset
per man ently to day
des ign. Nig
htMode The
displayisset
per man ently to night
des ign. Aut
omatic The
displaydes ign
ch ang esdepe nding on
th eveh icleinst rum ent
clu ster illum inati on. i
Whe nthe Automatic settin
gis selected,
COMAND evaluatesthe readings fromthe
automatic vehiclelightsensor and
switches betweenthedispla ydesigns
automatically . Time
settings General
informat ion
If COMAND isequipp edwith anavigation
system andhasGPS reception, COMAND
automatically setsthetime anddate. Youcan
also adjust thetime yourself in30-m inute
incremen ts,but thedate cannot bechanged.
i Ifyou setthe time in30-m inute
incremen ts,any time zone settin gsand
settin gsfor changing betweensummerand
standard timearelost (Ypage 44).
i The following navigation systemfunctions
require thetime, timezone andsummer/
standard timetobe set correct lyin order
to work properly:
R route guidanceonroutes withtime-
dependent trafficguidance
R calculation ofexpected timeofarrival To
set the time
X Press theW button. X
Select Time by
turning cVdtheCOMAND
cont roller andpress Wtoconfirm .
X Select SetTime and
press Wtoconfirm . :
Toset the time
; Current date(setautomatically by
COMAND)
X Set thetime byturning cVdtheCOMAND
cont roller andpress Wtoconfirm . Setting
thetime/dat eforma t
X Press theW button.
X Select Time by
turning cVdtheCOMAND
cont roller andpress Wtoconfirm .
X Select Format and
press Wtoconfirm .
The #dots indicate thepresent settings. Abbreviation Meaning
DD /MM /YYYY Day/Month/
Year
(date format) YYYY /MM /DD Year/Month/
Day
(date format) HH /MM Hours/Minutes
(time format) You
cansetthe 24-hour orthe AM/PM
format. X
Set theformat byturning cVdthe
COMAND controller andpress Wto
confirm . Time
settings
43Systemsettings

Voi
ceContro lSys tem settin gs Ac
tiva ting/deac tivatingthe help
wi ndo w
In additio nt othe audib leinstr uctions, the
help window willshow youother inform ation
during voicecontroloperation andthe
individuali zationprocess.
X Press theW button .
X Select Settings by
turnin gcVd the
COMAND controller andpress Wto
conf irm.
X Select Linguatronic and
press Wto
conf irm.
X Select HelpWindow and
press Wto
conf irm.
You have switched thehelp window on
O oroff ª. Individualiza
tion
Introdu ction You
canusetheindividuali zationfunctionto
fine tune theVoice Control System toyour
voice andtherefor eimprove voice
recogn ition.However, thiswillaffect the
system's abilitytorecogn izethe voices of
other users. Forthis reason thisfunct ioncan
be switched off(Ypage 46).
<001E000E0004000900160009000400150001000C0009001C000100140009000F
000EV consistsof two parts and
lasts about fiveminutes. Itinvolves training
the system usingacert ainnumber of
numerical sequences andvoice comman ds.Star
ting new individualiza tion It
is only possible tostart individuali zation
when thevehicle isstation ary.Before
start ing,switch offalldevices orfunct ions
which couldinterfere,such asthe radio orthe
navigation system.Afterstart ingthe session,
the system guidesyouthrough thetrainin g
with spoken instructions.
X Press theW button .
X Select Settings by
turnin gcVd the
COMAND controller andpress Wto
conf irm.
X Select Linguatronic and
press Wto
conf irm.
X Select Start NewIndividualiz ation and
press Wtoconf irm.
You seeand hear aprompt askingwhether
you would likefurther informat ion.
X Select Yes or
No and
press Wtoconf irm.
If you select No ,
the first part of
individuali zationbegins. Youhear aprompt
asking whether youwould liketotrain the
system innumbers orinvoice comman ds.
Aft erselecting Yes ,
you seeaninformat ion
display andhear inform ationregarding the
individuali zationprocess. Thefirst part of
individuali zationthenbegins automatically.
X To close thedisplay: pressWthe
COMAND controller.
You hear aprompt askingwhether you
would liketotrain thesystem innumbers
or invoice comman ds. Voice
Control System settings
45Systemsettings

Acti
vating/d eactivating Blu eto oth ®
X Pre sstheW button.
The systemmen uappear s.
X Se lec tSet tin gs by
turnin gcVd the
COMA NDcontrol ler and pressW to
co nfirm .
X Se lec tAct iva teBluetooth and
press
W toconfirm .
This switches Blue tooth®
on O oroff ª. Sys
tem langua geset tings
This function allows youtodet erm inethe
lan guage forthemen udisp lays andthe
nav igat ionann oun cemen ts.T he selected
language affectsthecharacters availablefor
entr y.
When yousetthe system language ,the
language ofthe Voice Control System will
change accordingly. Ifthe selected language
is not supported bythe Voice Control System,
"English" willbeselected.
X Press theW button.
X Select Settings by
turning cVdthe
COMAND controller andpress Wto
confirm .
X Select Language and
press Wtoconfirm .
The listoflanguage sappea rs.The #dot
indicates thecurrent setting. X
Select thelanguage byturning cVdthe
COMAND controller andpress Wto
confirm .
COMAND loadstheselected language and
sets it. Reset
function
You canreset COMAND tothe factory
settin gs.Amon gstother things, thiswill
delete allpersonal data(e.g.station presets,
address bookentries, entriesinthe
destination memoryandinthe listofprevious
destinations inthe navigation system).
Resetting isrecommen dedbefore sellingor
transf erring ownership ofyour vehicle, for
example.
Data onthe intern alhard drive, e.g.music
files inthe MUSIC REGISTER, willbedeleted.
You canalso delete musicfilesfrom the
MUSIC REGISTER usingthe"Delete allmusic
files" (Ypage 146)function.
X Press theW functionbutton.
X Select Settings by
turning cVdthe
COMAND controller andpress Wto
confirm .
X Select Reset and
press Wtoconfirm .
Ap rompt appears asking whethe ryou wish
to reset.
X Select Yes or
No and
press Wtoconf irm.
If you select No ,
the process willbeaborted.
If you select Yes ,
a prompt willappear again
asking whether youreally wishtoreset.
X Select Yes or
No and
press Wtoconf irm.
If you select Yes ,
a message willbeshown.
COMAND isreset andrestart ed.
If you select No ,
the process willbeaborted. Reset
function
47Systemsettings