engine oil MERCEDES-BENZ E400 HYBRID 2014 Owners Manual
[x] Cancel search | Manufacturer: MERCEDES-BENZ, Model Year: 2014, Model line: E400 HYBRID, Model: MERCEDES-BENZ E400 HYBRID 2014Pages: 52, PDF Size: 32.59 MB
Page 6 of 52

A
ABS (Anti-lock Braking System) Function/notes ................................ 15
Anti-lock Brake System
see ABS
Authorized Mercedes-Benz Center
see Qualified specialist workshop
Automatic climate control ..................18
Automatic engine start (ECO start/
stop function) ...................................... 23
Automatic engine switch-off (ECO
start/stop function) ............................22
Automatic transmission Progra mselecto rbutton .................. 21 B
Battery Charging .......................................... 38
High-voltage battery charg elevel
(COMAND )....................................... 29
Jump-starting ................................... 39
Notes ............................................... 38
see High-voltag ebattery
Battery (vehicle)
Display message .............................. 33
Brakes
Warning lamp ................................... 34
Brake system
see RBS C
Climate control Refrigerant ....................................... 46
Refrigerant filling capacity ...............47
COMAND
Fuel consumption ............................ 31
Generated electricity .......................31
High-voltage battery charg elevel .... 29
Overview .......................................... 28
Consumption statistics
(COMAND)
see Fuel consumption
Cruise control ...................................... 16 D
Data see Technical data
Display messages
Calling up (on-board computer) .......32
General notes .................................. 31
Hiding (on-board computer) .............31
DISTRONIC PLUS
Function/notes ................................ 16
Driving safety systems
see ABS
see RBS
Driving systems
Cruise control .................................. 16
DISTRONI CPLUS ............................. 16
Driving tips
Brakes ............................................. 26
General ............................................ 25
Points to remember .........................20 E
ECO start/stop function .....................22
Electric motor Power displa y.................................. 28
Electric motor power display .............28
Engine see Internal combustion engine
Engine oil ............................................. 46
ESP ®
(Electronic Stability
Program) Warning lamp ................................... 35
Exhaustive discharging (high-
voltage battery) ................................... 38
Extended overrun mode .....................23 G
Generated electricity (COMAND) .......31
Gliding see Extended overru nmode
see Overrun mode 4
Index
Page 48 of 52

Useful information
i This Operator's Manual describes all
models and all standard and optional
equipment of your vehicle available at the
time of publication of the Operator's
Manual. Country-specific differences are
possible. Please note that your vehicle may
not be equipped with all features
described. This also applies to safety-
related systems and functions.
i Read the information on qualified
specialist workshops: (Y page 7).Information on the technical data
i The data stated here specifically refers to
a vehicle with standard equipment .Consult
an authorized Mercedes-Benz Center for
the data for all vehicle variants and trim
levels. Service products and filling
capacities Engine oil
Points to remember Only engine oils approved by Mercedes-Benz
may be used in Mercedes-Benz engines (for
further information see the vehicle
Operator's Manual).
Model Engine
model MB
Approval
E 400 HYBRID
276 229.5
Filling capacities
The following values refer to an oil change
including the oil filter.
Engine with oil filter
Capacity
6.9 US qt (6.5 l) Climate control system refrigerant
Important safety notes !
Only the refrigerant R-134a and the PAG
oil approved by Mercedes-Benz may be
used. The approved PAG oil may not be
mixed with any other PAG oil that is not
approved for R-134a refrigerant.
Otherwise, the climate control system may
be damaged.
Service work, such as topping-up refrigerant
or replacing components, may only be carried
out by a qualified specialist workshop. All
applicable regulations must be adhered to,
SAE standard J639 included.
Always have work on the climate control
system carried out at a qualified specialist
workshop.
Refrigerant instruction label Example: refrigerant instruction label
:
Warning symbol
; Refrigerant filling capacity
= Applicable SAE standards
? PAG oil part number
A Type of refrigerant
Warning symbols :indicate:
R possible dangers
R that it is necessary to have maintenance
work carried out at a qualified specialist
workshop 46
Service products and filling capacitiesTechnical data