ECU MERCEDES-BENZ EQA SUV 2021 Workshop Manual

In
thefo llowing situations, theve hicle is held by
transmission position jand/or bythe electric
parking brake:
R The seat belt is unfastened and the driver's
door is opened.
R The vehicle is switched o..
R There is a system malfunction.
R The po wer supply is insu1cient. F F
unction of t
unction of t he int
he intellig
ellig ent cr aw
ent cr awler mode
ler mode The intelligent cr
awler mode assists you when
pulling away, manoeuvring and parking on uphill
or downhill inclines. When the brake pedal is
re leased, theve hicle rolls in the direction of the
engaged transmission position. The cr awler tor-
qu e is adap tedto the uphill incline.
In recuperation le velhà (/page 156) the
intelligent cr awler mode also assists you up to
speeds of appr oximately 20 km/h, byfollowing
th eve hicle in front at appr oximately the same
speed. The intelligent cr
awler mode is only an aid. The
driver is responsible for maintaining a su1cient
distance totheve hicle in front.
Syst Syst em limits em limits
The intelli gent cr awler mode does not automati-
cally stop theve hicle if theve hicle in front stops.
Bring theve hicle toa standstill using the brake
pedal. F
F
unction of Hill St
unction of Hill Star
art Assist
t Assist Hill
Start Assist holds theve hicle for a short time
when pulling away on a hill under thefo llowing
conditions:
R The transmission is in position hork.
R The electric parking brake is released.
This gives you enough time tomo veyour foot
from the brake pedal tothe accelerator pedal and
depress it before theve hicle begins torollawa y. &
W
WARNI NG
ARNI NGRisk of accident and injury due
to theve hicle rolling away
ATer a sho rttime, Hill Start Assist no lon ger
holds theve hicle. #
SwiTly mo veyour foot from the brake
pedal tothe accelerator pedal. Do not
lea vetheve hicle when it is being held by
Hill Start Assist. F
F
unction of A
unction of A dap
daptiv
tive Br
e Br ak
ake Lights
e Lights Ad
aptive Brake Lights warnfollowing tra1c in an
emer gency braking situation with thefo llowing
actions:
R By 0ashing the brake lamps
R By activating the hazard warning lights
If th eve hicle is braked sharply from speeds abo ve
50 km/h, the brake lamps 0ash rapidl y.This pro-
vides tra1c tr avelling behind you with an even
more noticeable warning.
If th eve hicle is tr avelling at speeds of more than
70 km/h at the beginning of the brake applica-
tion, the hazard warning lights switch on once the194
194
Driving and parking

ve
hicle is stationar y.When you pull away again,
th e hazard warning lights will switch o. automati-
cally at appr oximately 10 km/h. You can also
switch o. the hazard warning lights using the haz-
ard warning button. A
A
TTENTION ASSIST
TTENTION ASSIST F
F
unction of A
unction of A TTENTION ASSIST
TTENTION ASSIST
AT TENTION ASSIST assists you on long, mono to-
nous journe ys, e.g. on mo torw ays and trunk
ro ads. If ATTENTION ASSIST de tects indicators of
fa tigue or increasing lapses in concentration on
th e part of the driver, it suggests taking a break.
AT TENTION ASSIST is only an aid. It cannot
alw ays de tect fatigue or lapses in concentration in
time. The system is not a substitute for a well-res-
te d and attentive driver. On long journe ys,ta ke
re gular breaks in good time that allow for ade-
qu ate recuperation.
Yo u can choose between two settings:
R St
Standar
andar d:
d:normal system sensitivity.
R Sensitiv
Sensitiv e:
e:higher system sensitivity. The driver
is wa rned earlier and the attention le vel de tec- te
dby ATTENTION ASSIST is ada pted accord-
ingl y.
If dr owsiness or increasing lapses in concent ra-
tion are de tected, theATTENTION ASSIST: Take
a break! warning appears in the Instrument Dis-
pla y.Yo u can ackno wledge the message and take
a break where necessar y.Ifyo u do not take a
break and ATTENTION ASSIST continues todetect
increasing lapses in concentration, you will be
wa rned again aTer a minimum of 15 minutes. Yo
u can ha vethefo llowing status information for
AT TENTION ASSIST displa yed in the assistance
menu of the on-board computer:
R The length of the journey since the last break. R
The attention le vel de term ined byATTENTION
ASSIS T:
- the fuller the circle, the higher the atten-
tion le vel de term ined
- asyour attention wanes, the circle in the
cent reofthe display becomes smaller
If AT TENTION ASSIST is unable tocalculate the
attention le vel and cannot issue a warning, the
System suspended message appears.
If a warning is given in the Instrument Displa y,the
multimedia system o.ers tosear chfor a rest
area. You can select a rest area and start naviga-
tion tothis rest area. This function can be acti va-
te d and deactivated in the multimedia system.
If AT TENTION ASSIST is deactivated, theÛ
symbol appears in the assistance graphic in the
Instrument Displ ay. ATer theve hicle is star ted,
AT TENTION ASSIST is automatically activated. The
last selected sensitivity le velre mains stored.
Syst
Syst em limits
em limits
AT TENTION ASSIST is active in the 60 km/h to
200 km/h speed range. Driving and parking
195
195

Syst
Syst
em limits
em limits
Cruise control may be unable tomaintain the
stored speed on uphill gradients. The stored
speed is resumed when thegr adient evens out.
Increase recuperation in good time on long and
steep downhill gradients. Take particular no teof
th is when driving a laden vehicle. By doing so, you
will make use of the electric mo tor's braking
e.ect tocharge the high-voltage batter y.This
re lie vesth e load on the brake system and pre-
ve nts the brakes from overheating and wearing
to oqu ickl y.
Do not use cruise control in thefo llowing situa-
tions:
R in tra1c situations which requ ire frequent
ch anges of speed, e.g. in heavy tra1c, on
winding roads
R on slippery roads. Accelerating can cause the
drive wheels tolose traction and theve hicle
could then skid.
R when visibility is poor F
F unction of t
unction of t he limit
he limit er
er
The limiter restricts the speed of theve hicle. To
re duce the speed tothe set speed, the limiter
applies the brakes automaticall y.
Yo u can limit the speed as follo ws:
R V Var ar iable:
iable: for a short-term speed restriction,
e.g. in built-up areas
R P
Per
er manent
manent :
:fo r a longer-term speed restric-
tion, e.g. in winter ty remode
Yo u can store any speed abo ve20 km/h up tothe
maximum design speed or up tothe set winter
tyre limit. You can also per form settings while the
ve hicle is stationary if theve hicle has been star-
te d.
Obser vethe no tes on driving systems and your
re sponsibility; you may otherwise failto recognise
dangers (/ page 188).
Display
Display s in t
s in the Ins
he Ins tr
trument Display
ument Display
R È (gre y): variable limi ter is selected but not
yet activated.
R È (0ashes grey ):va riable limi ter is temp o-
rari lypassive.
R È (gre en): variable limi ter is activated. A stored speed appears along with
theÈ dis-
pla y.The segments in the speedome ter light up,
up tothe cur rently stored speed.
If yo u depress the accelerator pedal be yond the
pressure point (kickdown), theva riable limi ter
switches topassive mode. The Limiter passive
message appears in the Instrument Display and
th eÈ display 0ashes.
The variable limi ter is reactivated in thefo llowing
situations:
R Ifth eve hicle speed drops below the stored
speed.
R Ifth e stored speed is called up.
R Ifyo u store a new speed.
Oper
Oper ating cr
ating cr uise contr
uise control or t ol or the v
he var
ariable limit
iable limit er
er &
W
WARNING
ARNING Risk of accident due tostored
speed
If yo u call up the stored speed and this is
lo we rth an your cur rent speed, theve hicle
decelerates. Driving and parking
197
197

#
If a tra1c sign has been de tected and is dis-
pla yed in the inst rument cluster: select J
with the leT rock er switch.
The maximum permissible speed on the tra1c
sign is adop ted as the stored speed. The vehi-
cle adapts its speed tothat of theve hicle in
front, but only up tothe stored speed.
Pulling awa
Pulling away wit
y wit h A
h Activ
ctiv e Dist
e Dist ance Assis
ance Assis t
t
DIS
DIS TR
TRONIC
ONIC #
Activate Active Distance Assist DISTRONIC
and remo ve yo urfoot from the brake pedal. #
Select Jwiththe leT rock er switch.
or #
Depress the accelerator pedal brie0y and
/rml y.
The functions of Active Distance Assist
DISTRONIC continue tobe car ried out.
Deactiv
Deactiv ating A
ating Activ
ctive Dist
e Dist ance Assis
ance Assist DIS t DISTR
TRONIC
ONIC &
W
WARNING
ARNING Risk of an accident due to
Ac tive Distance Assist DISTRONIC being
acti vewhen you lea vethe driver's seat
If yo u lea vethe driver's seat while theve hicle
is being braked byActive Distance Assist
DISTRONIC onl y,theve hicle can rollaw ay. #
Always deacti vate Ac tive Distance Assist
DISTRONIC and secure theve hicle to
pr ev ent it from rolling away before you
lea vethe driver's seat. #
Select Owiththe leT rock er switch.
% Ifyo u brake, deactivate ESP ®
or if ESP ®
inter-
ve nes, Active Distance Assist DISTRONIC is
deactivated.
Incr
Incr easing/decr
easing/decr easing t
easing the st
he stor
ored speed
ed speed #
1 km/h: press roc ker switch 1upM or
down Ntothe pressure point, or press and
hold (increments of 1 km/h).
or #
10 km/h: press rock er switch 1upM or
down Nbeyond the pressure point, or
press and hold (increments of 10 km/h).
or #
Accelerate theve hicle tothe desired speed
and press rock er switch 1upM.
Changing t
Changing t he
hespeci/ed
speci/ed dist
distance t
ance t o t
o the v
he v ehicle in
ehicle in
fr
fr ont
ont #
T
To r
o r educe t
educe t he
hespeci/ed
speci/ed dist
distance:
ance: pressthe
ri ght rock er switch up ( Ñ). #
T To incr o incr ease t
ease t he
hespeci/ed
speci/ed dist
distance:
ance: pressthe
ri ght rock er switch down ( Ò).
F
F unction of A
unction of A ctiv
ctive Speed Limit Assist
e Speed Limit Assist
If a change in the speed limit of 20 km/h or more
is de tected and automatic adoption of speed lim-
its is activated, the new speed limit is automati-
cally adop ted as the stored speed (/ page 216).
The driven speed is adjusted when theve hicle is
le ve l with the tra1c sign at the latest. In the case
of signs indicating entry into an urban area, the
speed is adap ted according tothe speed permit-
te d within the urban area. The speed limit display Driving and parking
203
203

R
Active Distance Assist DISTRONIC is acti va-
te d.
Multimedia system: 4 © 5
Settings 5
Quick access #
Select aAct. Steer. Asst .F
F
unction of A
unction of A ctiv
ctive Emerg
e Emerg encySt
ency Stop Assist
op Assist If
th e system de tects that the driver has not
steered theve hicle for a considerable period of
time or has remo vedth eir hands from the steering
wheel, display 1appears in the Instrument Dis-
pla y.Ifth e driver still does not steer theve hicle,
or gives no con/rmation tothe system, a warning to
ne sounds in addition tothe visual warning mes-
sage.
If th e driver still does not respond tothewa rning,
th eBeginning emergency stop message appears
in the Instrument Displa y.Ifth e driver still does
not respond, Active Distance Assist DISTRONIC
re duces the speed. The vehicle is decelerated in
stages toa standstill.
Depending on the countr y,at speeds below
60 km/h the hazard warning lights switch on
automaticall y.
When theve hicle is stationar y,thefo llowing
actions are car ried out:
R The vehicle is secured with the electric par k-
ing brake.
R Active Distance Assist DISTRONIC is ended.
R The vehicle is unloc ked.
R If possible, an emer gency call is placed tothe
Mercedes-Benz eme rgency call centre.
The driver can cancel the deceleration at any time
by per form ing one of thefo llowing actions:
R Steering R
Braking or accelerating
R Deactivating Active Distance Assist
DISTRONIC A A
ctiv
ctiv e Br
e Br ak
ake Assist
e Assist F
F
unction of A
unction of A ctiv
ctive Br
e Br ak
ake Assist
e Assist
Ac tive Brake Assist consists of thefo llowing func-
tions:
R Distance warning function
R Autonomous braking function
R Situation-dependent braking assistance
R V
V ehicles wit
ehicles wit h Dr
h Driving Assist
iving Assist ance P
ance Pack
ackag
age:
e: Eva-
sive Steering Assist and cornering function
Ac tive Brake Assist can help youto minimise the
ri sk of a collision with vehicles, cyclists or pedes-
trians or toreduce the e.ects of such a collision.
If Ac tive Brake Assist has de tected a risk of colli-
sion, a warning tone sounds and theL dis-
ta nce warning lamp lights up in the inst rument
cluster. 208
208
Driving and parking

Do not
exceed thefo llowing values:
R Perm issible towing capacity
R Perm issible rear axle load of theto wing vehi-
cle
R Perm issible gross weight of theto wing vehicle
R Perm issible gross weight of the trailer
R Maximum permissible speed of the trailer
Ensure thefo llowing before starting a journe y:
R The tyre pressure on there ar axle of theto w-
ing vehicle is set for a maximum load
R The lighting of the connected trailer is opera-
tional
R V
V ehicles wit
ehicles wit hout LED headlam
hout LED headlam ps or MUL
ps or MULTI-
TI-
BEAM LED headlam
BEAM LED headlam ps:
ps: the headlamps ha ve
been set cor rectly
In theev ent of increased rear axle load, the car/
trailer combination must not exceed a maximum
speed of 100 km/h forre asons conce rning the
operating permit. This also applies in countries in
which the permissible maximum speed for car/
trailer combinations is abo ve100 km/h. F F
olding t
olding t he ball nec
he ball nec k out and in
k out and in &
W
WARNING
ARNING Risk of accident due tothe ball
neck not being engaged
If th e ball neck is not engaged, the trailer may
come loose. #
Always engage the ball neck as descri-
bed. &
W
WARNING
ARNING Risk of injury from ball neck
swinging outwards
The ball neck may swing outwards when
unlocking or when it has not been proper ly
engaged.
There is a risk of injury within the ball neck's
ra nge of mo vement! #
Unlock the ball neck only when its range
of mo vement is unobstructed. #
Always be sure the ball neck is engaged
when folding in wards. *
N NOOTE
TE Increased risk of damage toprop-
erty due tofolded-out ball neck #
When the trailer is not coupled or the
bicycle rack is attached, fold in the ball
neck or, in the case of a fully electric
trailer hitch, retract the ball nec k. *
N
NO
OTE
TE Damage totheve hicle due toincor-
re ct use of the trailer hitch When a trailer hitch is used
toreco ver a vehi-
cle, theve hicle may be damaged in the proc-
ess. #
Use the trailer hitch only for pulling a
trailer or attaching appr oved car rier sys-
te ms (e.g. a bicycle rack ). R
R
eq
eq uir
uir ements:
ements:
R The vehicle is secured against rolling away.
R The swivel range is clear.
R The trailer cables or ada pter plugs ha vebeen
re mo ved. 238
238
Driving and parking

F
F
olding t
olding t he ball nec
he ball nec k out
k out #
Pull switch 2until the ball neck unloc ks.
The ball neck will fold out from under there ar
bumper.
Indicator lamp 1will 0ash. #
Pull the ball neck in the direction of the ar row
until it engages audibly in a vertical position.
Indicator lamp 1onthe ball neck release
switch will go out.
If th e ball neck is not securely loc ked in place,
th eTrailer coupling Check lockmessage will
appear on the inst rument displa y. #
Remo vethe co ver cap from the ball head and
store it in a safe place. Make sure
that the ball on the ball neck is clean.
Check that it is either greased or dry (g rease-
free), depending on the inst ructions forth e trailer.
F
F olding t olding t he ball nec
he ball nec k in
k in #
Pull switch 2until the ball neck unloc ks.
The ball neck will fold up under there ar
bumper.
Indicator lamp 1will 0ash. #
Push the ball neck in the direction of the
ar ro w until it engages audibly behind the
bumper.
Indicator lamp 1will go out and the message
on the inst rument display will disappear.
Obser vethe information about the displa yson the
inst rument cluster:
R Indicator and warning lamps (/ page 408)
R Display message s (/page 358) Coupling up/uncoupling a tr Coupling up/uncoupling a tr
ailer
ailer R
R
eq
eq uir
uir ements:
ements:
R The ball neck is extended and engaged in a
securely loc ked position. Driving and parking
239
239

Tr
ailers with a 7-pin plug can be connected tothe
ve hicle with thefo llowing adap ters:
R Adapter plug
R Adapter cable
The trailer will be cor rectly de tected bytheve hi-
cle only if thefo llowing conditions are met:
R The trailer is connected cor rectl y.
R The trailer lighting system is in working order.
The functions of thefo llowing systems will be
a.ec tedbya cor rectly connected trailer:
R ESP ®
trailer stabilisation
R Active Lane Keeping Assist
R Parking Assist PARKTRONIC
R Active Parking Assist
R Blind Spot Assist or Active Blind Spot Assist
R Drive Away Assist
R Cross Tra1c Ale rt
R Reversing camera
R 360° camera Coupling up a tr
Coupling up a tr ailer
ailer
* NO
NOTE
TEDamage tothe star ter battery due
to full dis charge Charging
the trailer battery using the po wer
supply of the trailer can damage the star ter
batter y. #
Do not use theve hicle's po wer supply to
ch arge the trailer batter y. #
Remo vethe co ver cap from the ball head and
store it in a safe place. #
Position the trailer on a le vel sur face behind
th eve hicle and couple it up totheve hicle. #
Open the soc ket cap. #
Inse rtthe plug with lug 1ingroo ve 3 on
th e soc ket. #
Turn bayonet coupling 2totheright as far as
it will go. #
Let the cap engage. #
Secure the cable tothe trailer with cable ties
(only if you are using an adap ter cable). #
Make sure that the cable is alw ays slack for
ease of mo vement during cornering.
Under thefo llowing conditions, a message may
appear on the inst rument display even if the
trailer has been connec ted cor rectl y:
R LEDs ha vebeen ins talled in the trailer lighting
system.
R The cur rent has fallen below the trailer lighting
system's minimum cur rent (50 mA).
% Accessories can be connected tothe perma-
nent po wer supply up to180 W and tothe
po we r supply that is switched on via the igni-
tion loc k. 240
240
Driving and parking

U
U
ncoupling a tr
ncoupling a tr ailer
ailer &
W
W ARNI NG
ARNI NGRisk of being crushed and
becoming trapped when uncoupling a
trailer
When uncoupling a trailer with an engaged
inertia-activated brake, your hand may
become trapped between theve hicle and the
trailer dr awbar. #
Do not uncouple trailers with an engaged
ove rrun brake. *
N
NO OTE TE Damage when uncoupling in a state
of ove rrun Uncoupling in a state of
overrun can damage
th eve hicle. #
Do not uncouple trailers with an engaged
ove rrun brake. #
Secure the trailer against rolling away. #
Disconnect the electrical connection between
th eve hicle and the trailer. #
Uncouple the trailer. #
Place the co ver cap on the ball head.
% T
Tr
railer
ailer s wit
s wit h LED lighting:
h LED lighting: aTer uncoupling the
traile r,switch theve hicle on and then o.
again. Bicy
Bicy
cle r
cle r ac
ack function
k function &
W
WARNING
ARNING Risk of an accident if the bicy-
cle rack is used incor rectly
The bicycle rack may become de tach ed from
th eve hicle in thefo llowing cases:
R the permissible load capacity of the trailer
hitch is exceeded.
R the bicycle rack is used incor rectl y.
R the bicycle rack is secured tothe ball neck
beneath the ball head.
Obser vethefo llowing foryo ur ow n sa fety and
th at of other road users:
R always adhere tothe permissible load
capacity of the trailer hitch. R
always obser vethe permissible rear axle
load of theto wing vehicle.
R use the bicycle rack only totransport bicy-
cles.
R always proper lysecure the bicycle rack by
attaching it tothe ball head.
R use only bicycle rack s appr ovedby
Mercedes-Benz.
R always obser vethe bicycle rack operating
instructions. *
N NOOTE TE Damage to, or crac kson, the trailer
hitch due tounsuitable bicycle rack s or
bicycle rack s being used inco rrectly #
use only bicycle rack s appr ovedby
Mercedes-Benz. *
N
NOOTE
TE Increased risk of damage toprop-
erty due tofolded-out ball neck #
When the trailer is not coupled or the
bicycle rack is attached, fold in the ball Driving and parking
241
241

neck or, in
the case of a fully electric
trailer hitch, retract the ball nec k. Depending on
the bicycle rack 's design, up to
th re e bicycles can be transpor ted on the bicycle
ra ck.
When mounted byattaching toball head 1,the
maximum load capacity is 75 kg. The maximum load capacity is calculated from
the
we ight of the bicycle rack and the bicycle rack
load.
Obser vethe no tes on driving with a roof load,
trailer or fully laden vehicle (/ page 152).
When using a bicycle rack , set the tyre pressure
fo r increased load on there ar axle of theve hicle.
Fu rther information on the tyre pressure can be
fo und in the tyre pressure table (/ page 334).
N
No ot tes on loading
es on loading
The lar gerth e distance between the load's centre
of grav ity and the ball head, thegr eater the load
on the trailer hitch.
Therefore, obser vethefo llowing no tes:
R mount heavy bicycles as close totheve hicle
as possible
R always distribute the load on the bicycle rack
as evenly as possible across theve hicle's lon-
gitudinal axis
Mercedes-Benz recommends removing all de tach-
able parts from bicycles (e.g. bask ets, ch ild seats,
re ch arge able batteries) before loading them onto
th e bicycle rack . This will impr ovethe aerody- namic
resis tance and centre of grav ity of the bicy-
cle rack.
Alw ays secure the bicycles toprev ent them from
moving around and check them at regular inter-
va ls to ensure that they are secure.
Do not use tarp aulins or other co vers. The driving
ch aracteristics and rear view may be impaired. In
addition, aerodynamic resis tance and the load on
th e trailer hitch will increase. Load distribution on
the bicycle rack
1 Vertical distance between centre of grav ity
and ball head 242
242
Driving and parking