engine MERCEDES-BENZ EQE SALOON 2022 User Guide

R
Mini map
R Sector overview
R Engine data
R G-force display
R Lap overview #
Select ïStart timing. #
Select .
#
Pull the desired display from thegr id on the
leT or right edge of the central displa y.
The displa ysare shown during theTrack Race.
By selecting ¨onthe active displa y,yo u can
deactivate this.
Displa
Displa ying t
ying the analy
he analy sis
sis #
Select
All tracks.
An ove rview of all the driven trac ksappears. #
Select a trac k. #
Select a session.
The following data is displa yed:
R Lap and sector times
R Average and maximum permissible speed
R Driver
R Vehicle
R Date
R Weather #
Select Add recording touse a di.erent ses-
sion as a refere nce value. #
Select %toreturn totheove rview. #
Select Diagram . #
Set the desired parame ters.
The ana lysis is displa yed. 1
Lap overview
2 Parame terove rview
3 Editing parame ters
4 Deleting parame ters
5 Adding new parame ters
% The following values can be set forth e param-
et ers, forex ample:
R Speed 326 326
MBUX multimedia system

R
Longitudinal/la tera l acceleration
R Steering angle
R Engine speed
R Engine oil/tyre tempe rature
Based on the anal ysis yo u can check and optimise
driving characteristics for any position on the
trac k.
Expor
Expor ting tr
ting tr ack
acks (USB)
s (USB) #
Select õTracks.
An ove rview of all stored trac ksappears. #
Select the desired trac k. #
Select options uforth e desired trac k. #
Select Export track to… .
The selec ted track can be expor tedto a USB
storage device connected totheve hicle.
Editing tr
Editing tr ack
acks and r
s and r ecor
ecordings
dings #
Select õTracks. #
Select the desired trac k. #
Select options uforth e desired trac k. #
Select Rename orDelete.
or #
Select a trac k. #
Highlight the desired recording. #
Select uoptions. #
Select Exporting to… orDelete. Se
Se
tting Dr
tting Dr ag R
ag Race
ace Multimedia system:
4 TRACK PACE 5
Drag Race
Measur
Measur ing acceler
ing acceler ation
ation #
Select ZDrag race options. #
Select Acceleration. #
Set a starting speed or select Automatic.
Measurement begins as soon as the speci/ed
starting speed has been reached. #
Set a targetspeed.
Measu rement stops as soon as the speci/ed
targ etspeed has been reached. #
Pull away and startthe measurement.
Measurement begins when theve hicle accel-
erates. Measu
rement can be stopped ear lyby inter rupt-
ing the acceleration procedure.
Quart
Quart er
er-mile r
-mile r ace
ace #
Select ZDrag race options. #
Select Quarter-mile. #
Set a targetdistance.
Measurement stops as soon as the speci/ed
targ etdistance has been reached. #
Pull away and startthe measurement.
Measurement begins when theve hicle accel-
erates. Timing runs until thetarg etdistance or
a maximum of one mile has been tr avelled.
Measurement can be stopped ear lyby inter rupt-
ing the acceleration procedure.
Measur
Measur ing br
ing braking
aking #
Z Drag race options #
Select Braking. #
Set a starting speed or select Automatic. #
Pull away and startthe measurement. MBUX multimedia system
327
327

#
Brake toa standstill.
Measu rement is incremental, in steps of
10 km/h toa standstill. If the braking proce-
dure is star ted e.g. at a speed of 157 km/h,
measurement starts as soon as 150 km/h has
been reached.
S
S t tor
or ing and calling up measur
ing and calling up measur ement v
ement v alues
alues
If measurement is comple ted or cancelled, a
prom ptappears asking whe ther the measurement
should be sa ved. #
Con/rm the prom ptwith OKtosave.
Calling up sav
Calling up sav ed measur
ed measurements
ements #
± Select History. #
Select Acceleration, Quarter-mileorBraking. #
Select a measurement.
The desired measurement is displa yed in
de tail.
or #
Dele tea measurement. Calling up t Calling up t
he t
he teleme
eleme tr
try displ ay
y display Multimedia sy
stem:
4 TRACK PACE 5
Telemetry
The telemetry display sho wscurrent vehicle data
as a digital value and as a diag ram. Up tofour
parame ters can be selected that are tobe shown
in the displa y.
Fo rex ample:
R Engine speed
R Wheel angle
R Speed
R Steering angle #
Set the desired parame ters. #
Set the time.
The set parame ters are evaluated in the dia-
gr am forth e time set. Con/gur
Con/gur
ing
ingAMG TRAC
AMG TRACK PA
K PA CE
CE R
R
eq
eq uir
uir ements:
ements:
T
T o connect a mobile de
o connect a mobile de vice t
vice to t
o the TRAC
he TRACK PA
K PA CE
CE
app:
app: R
The TRACK PACE app is installed on the
mobile end device.
R The mobile end device is connected tothe
multimedia system via Wi-Fi.
The mobile end device is connec tedto the
multimedia system via Wi-Fi .
Multimedia system: 4 TRACK PACE 5
Z
Connecting a mobile de
Connecting a mobile de vice via t
vice via the TRAC
he TRACKPA
K PA CE
CE
app
app
The TRACK PACE app makes it possible torecord
videos and tosynchronise them with stored
trac ks. #
Select TRACK PACE App. #
Select Authorise new device . #
Start the TRACK PACE app on the device tobe
connected. #
Select Continue and con/rmthe authorisation
prom pt.
A four-digit code is shown in the central dis-
pla y. 328 328
MBUX multimedia system

The ASS
YST PLUS service inter val display is only
an aid. It is there sponsibility of the driver of the
ve hicle tohave maintenance workcar ried out
more oTen than prescribed due toactual operat-
ing conditions and/or st resses. Batt
Batt
er
ery disconnection per
y disconnection per iods
iodsThe AS
SYST PLUS service inter val display can cal-
culate the service due date only when the battery
is connected. #
Display and no tedown the service due date
on the driver display before disconnecting the
battery (/ page 367). Engine com
Engine com
par
partment
tment A
A
ctiv
ctiv e bonne
e bonne t (pedes
t (pedestr trian pr ot
ian pr otection)
ection) Oper
Oper
ation of t
ation of t he activ
he active bonne
e bonne t (pedes
t (pedestr trian pr ot
ian pr otec-
ec-
tion)
tion)
In cer tain accident situations, the actuation of the
active bonn etreduces therisk of injury topedes-
trians. The rear area of the bonnet is raised by
appr oximately 80 mm. ATer being triggered,
the active bonnet remains in
th era ised position. Limited visibility due tothe
ra ised bonnet cannot be ruled out.
ATer the active bonnet has been actuated, pedes-
trian pr otection may be limited.
Ha ve the full functionality of the active bonnet
re stored immediatel y in aquali/ed specialist
wo rkshop.
If necessar y,adjust your seat position and drive
carefully toaqu ali/ed specialist workshop. If a
safe continued jou rney is not possible, contact a
qu ali/ed specialist workshop. N No
ot
tes on t
es on t he bonn et
he bonn et Only
the specialist personnel of a quali/ed spe-
cialist workshop should open the bonnet. Access
by the customer is not permitted.
To open the bonnet, consult a quali/ed specialist
wo rkshop. &
D
DAN
AN GER
GER Risk of fatal injuries when car ry-
ing out maintenance workduring the
ch arging process
During thech arging process, the high-voltage
on-board electrical system is under high volt-
age. #
Do not per form any main tenance work
during thech arging process. &
W
WARNING
ARNING Risk of accident due todriving
with the bonnet unloc ked
The bonnet may open and blo ckyour vie w. #
Neverre lease the bonnet when driving. #
Before every trip, ensure that the engine
bonnet is loc ked. &
W
WARNING
ARNING Risk of accident and inju ry
when opening and closing the bonnet
The bonnet may suddenly drop into the end
position.
There is a risk of injury for an yone in the
engine bonnet's range of mo vement. 368 368
Maintenance and care

#
Do not open or close the bonnet if there
is a person in the bonnet's range of
mo vement. &
W
W ARNING
ARNING Risk of injury due tooverheated
ve hicle
If yo u open the bonnet in theev ent of an over-
heated vehicle or /re in the engine compart-
ment, thefo llowing situations may occur:
R You may come into contact with hot gases.
R You may come into contact with other
escaping hot operating 0uids. #
Intheev ent of overheating or /re in the
engine compartment, keep the bonnet
closed and call the /re service. #
Allow theov erheated vehicle tocool
down /r stifyo u need toopen the bon-
net. &
W
WARNING
ARNING Risk of injury due tomoving
parts
Components in the engine compartment may
continue torun or start unexpectedly even
when the drive system is switched o..
Obser vethefo llowing if you must open the
bonnet: #
Switch o. theve hicle. #
Neverto uch the danger zones sur round-
ing moving components, e.g. thero tation
area of thefa n. #
Remo vejewe llery and watches. #
Keep items of clo thing and hair away
from moving pa rts. &
W
WARNING
ARNING Risk of injury from using the
windscreen wipers when the bonnet is
open
If th e windscreen wipers start moving when
th e bonnet is open, you could be trapped by
th e wiper linkage. #
Always switch o. the windscreen wipers
and theve hicle /r stifyo u need toopen
th e bonnet. N
No
ot
tes on t
es on t he coolant lev
he coolant lev el
el Checking or
topping up coolant should be car ried
out only bythe trained personnel of a quali/ed
specialist workshop. Access bythe customer is
not permitted.
To check or top up coolant, use a quali/ed spe-
cialist workshop. &
W
WARNING
ARNING Risk of scalding from hot cool-
ant
Yo u may scald yourself if you open the cap
when the drive system is at normal operating
te mp erature. #
Let theve hicle cool down before opening
th e cap. #
When opening the cap, wear pr otective
glo ves and saf ety glasses. #
Open the cap slo wlytorelease pressure. Maintenance and care
369
369

Maintain a distance of at least 70 cm between
th efo il-co vered parts of theve hicle and the
nozzle of the high-pressure cleaner. Mo vethe
high-pressure cleaner nozzle around whilst
cleaning. The waterte mp erature of the high-
pressure cleaner must not exceed 60°C.
R Obser vethe information on the cor rect dis-
ta nce in the equipment manufacturer's opera-
to r manual.
R Do not direct the nozzle of the high-pressure
cleaner directly at sensitive parts such as
tyres, gaps, electrical component parts, bat-
te ries, illuminants and louvres. W W
ashing t
ashing t he v
he vehicle b
ehicle b y hand
y hand Obser
vethere leva nt legal requ irements (e.g. in
some countries, washing byhand is permitted
only in special lydesignated wash ba ys). #
Use a mild cleaning agent (e.g. car shampoo). #
Washtheve hicle with luk ewarm water using a
soT car sponge. When doing so, do not
ex pose theve hicle todirect sunlight. #
Carefully hose theve hicle o. with water and
dry using a chamois.
% Obser vethe no tes on the care of car parts
(/ page 373). N No
ot
tes on paintw
es on paintw or
ork/matt
k/matt /nish
/nishpaintw
paintw or
ork care
k care To
avo id damaging the paintwork and inter fering
with the driving assistance systems, please
obser vethefo llowing no tes:
P
P aint
aint
R Insect remains: Soak with insect remo ver and
ri nse o. the treated areas aTer wards.
R Bird droppings: Soak with water and rinse o.
aTer wards.
R Tree resin, oils, fuels and greases: remo veby
ru bbing gently with a clo thsoaked in petro-
leum ether or lighter 0uid.
R Coolant and brake 0uid: remo vewith a damp
clo thand clean water.
R Tar stains: use tarre mo ver.
R Wax: use silicone remo ver. R
Do not attach sti ckers, /lms or similar materi-
als. Only ha ve/lm attached tothe bumper at
a quali/ed specialist workshop.
R Remo vedirt immediatel y,where possible.
Matt
Matt /nish
/nish
R Only use care products appr ovedfor
Mercedes-Benz.
R Do not attach stic kers, /lms or similar materi-
als. Only ha ve/lm attached tothe bumper at
a qu ali/ed specialist workshop.
R Do not polish theve hicle and light-alloy
wheels.
R Only use car washes that cor respond tothe
latest engineering standards.
R Do not use car wash prog rammes with a /nal
hot wax treatment.
R Do not use paint cleaners, bu1ng or polishing
products, gloss preser vers,e. g. wa x.
In theev ent of paintwork damage:
R Always ha vepaintwork repairs car ried out at a
qu ali/ed specialist workshop. 372
372
Main
tenance and ca re

N
N
o
ot
tes on t
es on t ec
echnical data
hnical data
* NO
NOTE
TEMercedes-AMG vehicles #
Obser vethe no tes in the Supplement.
Yo u could otherwise failto recognise
dangers. The
tech nical data was de term ined in accordance
with EU Directives. The data stated only applies to
ve hicles with standard equipment. You can obtain
fur ther information from a Mercedes-Benz Service
Centre.
Onl Onl y f
y for cert
or cert ain countr
ain countr ies:
ies:you can /n dvehicle-
speci/c vehicle data in theCO C documents (CER-
TIFIC ATE OF CONFORMITY). These documents
are supplied when theve hicle is deli vered. On-boar
On-boar
d electr
d electronics
onics N
No
ot
tes on t
es on t am
amper
per ing wit
ing wit h t
h the engine electr
he engine electr onics
onics *
N
NOOTE
TE Premature wearthro ugh improper
maintenance Improper maintenance may cause
vehicle
components towe ar more quickly and the
ve hicle's operating permit may be in validated. #
Always ha veworkon the engine elec-
tronics and related components car ried
out at a quali/ed specialist workshop. T
T
w
w o-wa
o-wa y r
y radios
adios N
No
ot
tes on
es on /tting
/tting tw
two-wa
o-wa y r
y radios
adios &
W
WARNING
ARNING Risk of accident due to
improper workon two-w ayradios
If two-w ayradios are manipulated or retro/t-
ted incor rectl y,the electromagnetic radiation
from the two-w ayradios can inter fere with the
ve hicle elect ronics and jeopardise the operat-
ing saf ety of theve hicle. #
You should ha veall workon electrical
and electronic components car ried out
at a quali/ed specialist workshop. &
W
WARNING
ARNING Risk of accident due to
improper operation of two-w ayradios
If yo u use two-w ayradios in theve hicle
improper ly,th eir electromagnetic radiation
can disrupt theve hicle's elect ronics. This is
th e case in thefo llowing situations, in particu-
lar:
R The two-w ayradio is not connected toan
ex terior aerial.
R The exterior aerial is /tted incor rectly or is
not a lo w-re0ection aerial.
This could jeopardise the operating saf ety of
th eve hicle. #
Have the lo w-re0ection exterior aerial /t-
ted at a quali/ed specialist workshop. #
When operating two-w ayradios in the
ve hicle, alw ays connect them tothe lo w-
re 0ection exterior aerial. 412
412
Te
ch nical data

V
V
ehicle
ehicle identi/cation
identi/cation plat
plate, VIN and engine num-
e, VIN and engine num-
ber ov
ber overerview
view
V
V ehicle
ehicle identi/cation
identi/cation plate
plate Ve
hicle identi/cation plate (e xample:Kuwa it)
1 Vehicle manu facturer
2 Place of manufacture
3 Manu facturing date
4 Vehicle model
5 VIN Ve
hicle identi/cation plate (e xample: all other
countries)
1 Vehicle manu facturer
2 EUgeneral ope rating permit number (only for
cer tain countries)
3 VIN (vehicle identi/cation number)
4 Maximum permissible gross vehicle weight
(kg) Te
ch nical data
415
415

5
Maximum permissible gross weight of vehicle
combination (kg) (only for speci/c countries)
6 Maximum permissible front axle load (kg)
7 Maximum permissible rear axle load (kg)
8 Paint code
% The data shown in the illust ration is example
data. VIN belo
VIN belo
w t
w the fr
he fr ont r
ont r ight-hand seat
ight-hand seat 1
Imprinted VIN (vehicle identi/cation number)
2 Floor co vering VIN at t
VIN at t
he low
he lower edg
er edge of t
e of the windscr
he windscr een
een 1
VIN (vehicle identi/cation number) as label
The VIN as a label at the lo wer edge of the wind-
screen is only available in some countries.
Engine number
Engine number
Fu rther information on mo tor numbers can be
obtained at a quali/ed specialist workshop. 416 416
Te
ch nical data

#
Have the brake 0uid rene we d at the
speci/ed inter vals. Ha
ve the brake 0uid regula rly re placed at a quali-
/ed specialist workshop.
Only use a brake 0uid appr ovedby Mercedes-
Benz according toMB-F reigabe or MB-Appr oval
331.0. Coolant
Coolant
N
No
ot
tes on coolant
es on coolant
Obser vethe no tes on operating 0uids
(/ page 417). &
W
WARNING
ARNING Risk of /re‑ and injury from
antif reeze
If antifreeze comes into contact with hot com-
ponent parts in the engine compartment, it
may ignite. #
Allow the drive system tocool down
before youto p up the antifreeze. #
Make sure that no antif reeze spills out
next tothe /ller opening. #
Thoroughly clean the antifreeze from
component parts before starting the
ve hicle. *
N
NOOTE
TE Damage caused byincor rect cool-
ant #
Only use coolant that has been premixed
with there qu ired antifreeze pr otection.
Information on coolant is available at thefo l-
lowing locations:
R Inthe Mercedes-Benz Speci/cation for
Operating Fluids 320.1
- Athttps://be vo.mercedes-benz.com
- Inthe Mercedes-Benz BeVo App
R Ataqu ali/ed specialist workshop *
N NOOTE
TE Overheating at high outside temp er-
atures If an inappropriate coolant is used,
the engine
cooling system is not su1ciently pr otected
against overheating and cor rosion at high out-
side temp eratures. #
Only use coolant appr ovedfor
Mercedes-Benz. #
Obser vethe inst ructions in the
Mercedes-Benz Speci/cations for Oper-
ating Fluids 320.1. Ha
ve the coolant regula rly re placed at a quali/ed
specialist workshop.
Proportion of antif reeze concentrate in the engine
cooling system:
R A minimum of 50% (antifreeze pr otection down
to about -37°C)
R A maximum of 55% (antif reeze pr otection
down to-45°C) N
No
ot
tes on windscr
es on windscr een w
een washer
asher 0uid
0uid Obser
vethe no tes on operating 0uids
(/ page 417). 418
418
Te
ch nical data