ECU MERCEDES-BENZ GL SUV 2012 Owner's Guide

to position
2or 0respective ly
( Y page 159). Bulb fa
ilure indicato rfor LEDl amps
i If LED lamps ar efitted in the trai ler, an
error message ma yappea rinthe multi-
function display eve nifthere is no fault .The
reason for the err or message could be that
the curren thas fallen below the minimum
of 50 mA.
To ensur ereliable operation of the bulb failure
indicator, each LE Dchain in the trailer lighting
must be guaranteed aminimum curren tof
50 mA. Trailer wit
h7-pin connector
General notes Trailers with 7-pi
nconnector: you can
make aconnection to the 13 -pin connector
on the ball coupling using an adapter plug or,
if necessary, an adapter cable. Bot hcan be
obtained in aqualified specialist workshop.
Fitting the adapter !
Make sure that there is sufficien tcable
play so that the cable cannot become
detached when cor nering.
! Remove th einstalled adapter cable
before folding in the ball coupling. Other-
wise, damage may occur to the rear
bumpe rand the adapter cable. X
Ope nthe socket cover.
X Inser tconnector with lug :into
groove ;of the socket. Tur nthe connec-
tor cloc kwise to the stop.
X Let the cover engage.
X If you are using an adapter cable, secure
the cable to the trailer with cable ties. Towing
atrailer
263Driving an dparking Z

X
Press the :or9 button to select A ,
B or
Change C .
X Press ato confirm.
You can now change the departur etime.
X Press the =or; button to select the
display to be changed: hours, minutes.
X Press the :or9 button to set the
selected display.
X Press the abutton to store the entry.
The yellow indicator lamp on the auxiliary
heating button lights up.
Convenience submenu Activating/deactivating the EASY-
ENTRY/EXIT feature
G
WARNING
The steerin gwheel moves when the EASY-
ENTRY/ EXIT feature is active. There is arisk
of occupant sbecoming trapped. Before acti-
vating the EASY-ENTRY/EXI Tfeature, make
sure that nobody can becom etrapped.
Do not leave children unsupervised in the
vehicle, eve nifthey ar esecured in achild
rest raint system. The children could open the
driver's door and thereby unintentionally acti-
vate the EASY-ENTRY/EXIT featur eand
become trapped.
X Pres sthe = or; button on the steer-
ing wheel to selec tthe Settings menu.
X Press the :or9 button to selec tthe
Convenie nce submenu.
X Press ato con firm.
X Press :or9 to select the Easy Entry/Ex
it function.
If the Easy Entry/Exit function is activa-
ted ,the vehicle steerin gwheel is displayed
in red in the multifunction display.
X Press the abutton to sav ethe setting.
Further information on the EASY- ENTRY/EXIT
feature (Y page 111). Switching the belt adjustment on/off
X
Press the =or; button on the steer-
ing whee ltoselect the Settings menu.
X Press the :or9 button to select the
Convenie nce submenu.
X Press ato con firm.
X Press the :or9 buttontos elect the
Belt adjustme nt function.
When the Belt adjustment function is
activated, th evehicle seat belt is displayed
in red in the multifunction display.
X Press the abutton to save the setting.
For further information on belt adjustment,
see (Y page 48).
Switching th eFold in mirrors when lock-
ing function on/off
This func tion is only available on vehicles with
Memor yFunction (Y page 115).
When you activat ethe Auto. fold-in mir‐
rors func
tion, the exterior mirror sare folded
in when th evehicle is locked. When you
unloc kthe vehicle and then open adoor, the
exterior mirror sfold out again.
X Press the =or; button on the steer-
ing wheel to select the Settings menu.
X Press the :or9 button to select the
Convenie nce submenu.
X Press ato con firm.
X Press :or9 to select the Auto. fold-in mirrors function.
If the Auto. fold-in mirrors function is
activated, th evehicle' sexterior mirror is
displaye dinred in the multifunction dis-
play.
X Press the abutton to save the setting. Menus and submenus
285On-board computera nd displays Z

Displa
ymessages Possible causes/consequences and
M Solutions
The red
!indicato rlamp flashes and the yellow !warning
lamp is lit.
The elect ricp arking brak eismalfunctioning.
To release:
X Switch off the ignition and tur nitback on.
X Release the elect ricp arking brak emanually.
To apply:
X Switch off the ignition and tur nitback on.
X Engage the elect ricp arking brak emanually.
If the red !indicator lamp con tinues to flash:
X Do not driv eon.
X Secure the vehicle agai nstrolling away ( Ypage 405).
X Mov ethe transmissio nselecto rlever to P.
X Turn the fron twheels towards the kerb.
X Consult aqualified specialist workshop. The yellow
!warning lamp lights up. The red !indicator
lamp flashes for about ten seconds after the electric parking brake
has been applied or released .Itthen goes out or remain slit.
The electric parkin gbrake is malfunctioning.
X Switch off th eignition and tur nitback on.
X Engage the electric parking brake.
If it is not possible to apply the electric parking brake:
X Move the transmission selector lever to P.
X Visit aqualified specialist workshop.
If it is not possible to release the electric parking brake:
X Release the electric parking brake automatically (Y page 182).
If the electric parking brake can still not be released:
X Consult aqualified specialist workshop. The yellow
!warning lamp lights up. If you manually apply or
release the electric parking brake, the red !indicator lamp
flashes.
The electric parking brake is malfunctioning. It is not possible to
apply the electric parking brake manually.
X Move the transmission selector lever to P.
X Visit aqualified specialist workshop. Display messages
295On-board computer and displays Z

Displa
ymessages Possible causes/consequences and
M Solutions
!
Pa
rking brake inop‐
erative Th
ey ellow !warning lamp lights up. The red !indicator
lamp flashes fo rabout ten seconds after the electric parkin gbrake
ha sb een applied or released. It then goes out or remains lit.
The electric parkin gbrake is malfunctioning ,e.g. because of over-
voltag eorundervoltage.
X Remove the cause for the overvoltage or undervoltage ,e.g. by
charging the battery or restarting the engine.
X Appl yorr elease the electric parkin gbrake.
If it remains impossibl etoapply or release the electric parking
brake:
X Swit choff the ignition and tur nitback on.
X Apply or release the electric parkin gbrake.
If th eelectric parkin gbrake can stil lnot be released:
X Consult aqualified specialist workshop. The display messag
eisonly shown whil ethe vehicle is in motion.
The red !indicator lam pflashes and the yellow !warning
lamp is lit.
It is not possible to apply the electric parkin gbrake manually.
X Move th etransmission selector lever to P.
X Visit aqualified specialist workshop. !
Turn on th
eigni‐ tion to release
the parkin
gbrake Th
er ed ! indicator lam pislit.
You attempted to release the electric parkin gbrake whil ethe igni-
tion was switched off.
X Key: turnthe key to position 1in the igni tion lock.
X KEYLESS-GO: switchonthe igni tion. J
Chec
kbrake fluid level There is insufficient brake fluid in th
ebrake flui dreservoir. In addi-
tion ,the J warnin glamp in the instrument cluster lights up and
aw arning ton esounds.
G WARNING
The brakin gefficienc ymay be impaired.
There is arisk of an accident.
X Pull over and stop the vehicle safely as soon as possible ,paying
attention to road and traffic conditions. Do not continue driving
under any circumstances.
X Secure the vehicle against rolling away (Y page 181).
X Consult aqualified specialist workshop.
X Do not top up the brake fluid. This does not correct the error. 296
Display messagesOn-board computer and displays

Displa
ymessages Possible causes/consequences and
M Solutions
#
Ch
eckb rake pad wear Th
eb rak epads/lining shaver eached their wear limit.
X Visit aqualified specialist workshop. PR
E-SAFE inopera‐ tiv
eS ee Owner's Manual Important functio
nsof PRE-SAFE ®
hav efailed .All other occupant
safet ysystems, e.g. airbags ,remai navailable.
X Visit aqualified specialist worksho pimmediately. PRE-SAFE
Function
scur‐ rently limited See
Owner's Manual Vehicle
swithou tthe Activ eDriving Assistance package: Adaptive
Brake Assist is temporaril yinoperative. Possible causes:
R the function is impaired due to heavy rain or snow.
R the sensor in the bumper is dirty.
R the rada rsensor system is temporarily inoperative, e.g. due to
electromagnetic radiation emit tedbyn earby TV or radi osta-
tions or othe rsources of elect romagnetic radiation.
R AM Gvehicles: ESP ®
is deactiva ted.
R the system is outside the operatin gtemperatur erange.
R the on-board voltage is too low.
Onc ethe causes liste dabove no longer apply, the display message
goes out.
Adapti veBrake Assis tiso perational again.
If the display message does not disappear:
X Pull over and stop the vehicle safely as soon as possible, paying
attention to road and traffic conditions.
X Secure the vehicle against rollin gaway (Y page 181).
X Clean the bumpers (Y page 370).
X Restart the engine.
X AMG vehicles: reactivate ESP ®
(Y page 67). Display messages
297On-boardcomputer and displays Z

Displa
ymessages Possible causes/consequences and
M Solutions
PR
E-SAFE Functions cur‐
rently limited See
Owner'
sManual Vehicles with the Active Driving Assistance package:
PRE-SAFE
®
Brake is tempora rily inoperative. Possibl ecauses:
R thef unction is impaire ddue to heav yrain or snow.
R thes ensor sint he ra diatortrim and in th ebumpers are dirty.
R the rada rsensor system is temporarily inoperative, e.g. due to
electromagnetic radiation emit tedbyn earby TV or radi osta-
tions or othe rsources of elect romagnetic radiation.
R AM Gvehicles: ESP ®
is deactiva ted.
R the system is outside the operatin gtemperatur erange.
R the on-board voltage is too low.
Onc ethe causes listed abov enolonger apply ,the displa ymessage
goes out.
PRE- SAFE ®
Brake is operational again.
If the displa ymessage does not disappear:
X Pull over and stop the vehicle safely as soon as possible, paying
attention to road and traffic conditions.
X Secure the vehicle against rollin gaway (Y page 181).
X Clean the sensors in the radiator grille and the bumper
(Y page 370).
X Restart the engine.
X AMG vehicles: reactivate ESP ®
(Y page 67). PRE-SA
FE Functions limited
See Owner's Manual Vehicles withou
tthe Activ eDriving Assistance package: Adapti ve
Brake Assis tisf aulty. The distanc ewarning function may also have
failed.
Vehicles with the Active Driving Assis tance package:
PRE-SAFE ®
Brak eisf aulty. BA SPLUS or th edistanc ewarning
function may also have failed.
X Visit aqualified specialist workshop. ü If the symbol appears in the multifunction display,
aseat belt
tongue has been inser tedi nto arear seat belt buckle.
Fur ther information on the status indicator for the rear seat belts
(Y page 49). 298
Display messagesOn-boar
dcomputer and displays

Engine
Display messages Possible causes/consequences and
M Solutions
+
Top
up co
olant See
Owner'
sManual Th
ec oolant leve listoo low.
! Avoi dmaking long jour neys with too little coolant in the engine
cooling system. The engin ewill otherwise be damaged.
X Top up th ecoolant ,obser ving the warning note sbefore doing
so (Y page 363).
X If th ecoolant needs toppin gupmoreo ften than usual ,have the
engin ecoolant system checked at aqualified specialist work-
shop. ? The fan motor is faulty.
X
If the coolant temperatur eisbelow 12 0†,you can continue
dri ving to the nearest qualified spe cialist workshop.
X Avoid heav yloads on th eengineasy ou do so, e.g. driving in
mou ntainous terrain and stop-start traffic. ?
Co
olantS topv ehi‐ cle Switch engine
off Th
ec oolant is too hot.
Aw arning ton ealso sounds.
G WARNING
Never driv ewithano verheated engine. Drivi ngwhen your engine
is overheate dcan cause fluids that may have leaked int othe
engin ecompartment to catch fire.
Stea mfromano verheated engine can cause serious burns, which
can occ urjus tbyo pening the bonnet.
There is ariskofi njury.
X Stop the vehicl eimmediately, paying att entio ntor oad and traf-
fic conditions, and switc hoff th eengine.
X Secure the vehicl eagainst rolling away (Y page 181).
X Leave the vehicle and keep asafe distance from the vehicle until
the engine has cooled down.
X Make sure that the air supply to the engine radiator is not
blocked, e.g. by frozen slush.
X Do not start the engine again until the display message goes out
and the coolant temperature is below 120 †. The engine may
otherwise be damaged.
X Pay attention to the coolant temperature display.
X If the temperature increases again, visit aqualified specialist
worksho pimmediately.
Unde rnormal operatin gconditions and with the specified coolant
level, the coolant tempera ture mayrise to 120 †. 304
Display messagesOn-board computer and displays

Displa
ymessages Possible causes/consequences and
M Solutions
8
Di
fferent. locking
sys
.c oolin gdown Please wait Th
ed ifferential loc kistoo hot and has been disengaged.
X Drive on carefully.
X Allow the differential lock to cool down.
The differential lock reengages as soon as it has cooled down. LO
WR ANGE Stop Apply parking brake Ag
earshif tprocess ha sbeen can celled. LOW RANGE is in the
neutral position. There is no connection between the engine and
the driv ewheels.
X Pull over and stop the vehicle safely as soon as possible, paying
attention to roa dand traffic conditions.
X Engag ethe electric parkin gbrake .Don ot con tinue driving under
any circumstances.
X Repe atthe gearshift process. LOW RANGE Malfunc‐
tion To park,
apply parking brake LO
WR ANGE is malfunctioning.
X Do not drive at speeds above 80 km/h.
X Whe nparking, secure the vehicle against rolling away
(Y page 181).
X Have the vehicle checked at aqualified specialist workshop. LO
WR ANGE max. 40 km/h Yo
uh ave exceeded the maximum spee dfor the gearshift process.
X Drive mor eslowly.
The gear change is made. LO
WR ANGE max. 70 km/h Yo
uh ave exceeded the maximum spee dfor the gearshift process.
X Drive mor eslowly.
The gear change is made. LOW RANGE Shift to
position
Nbriefly Yo
uh ave reduced the vehicle speed, but the automatic transmis-
sion is not in position N.
X Briefly shift the automatic transmission to position N.LOW RANGE Shifting
cancelle
dPlease reactivate Th
eg earshif tprocess ha sbeen cancelled.
X Repeat the gearshif tprocess. Ã
inoperative DSR (Downhil
lSpeed Regulation) is deactivated due to afault.
X Hav eDSRchecked at aqualified specialist workshop. Display messages
309On-boar dcomputer and displays Z

Displa
ymessages Possible causes/consequences and
M Solutions
Vehicles wit
hBecker ®
MA PPILOT :ifthe Becker ®
MA PPILOT is
not connected, the radar sensor syste misdeactivated automati-
cally.
BAS PLUS, DI STRONIC PLUS, Blind Spot Assis torActive Blind
Spo tAssist and PRE-SAFE ®
Brake ar enot available.
X Connect the Bec ker®
MAP PILOT; see the separate operating
inst ructions. Lane Keeping
Assist currently
unavailable See
Owner's Manual
Active Lane Keep‐
ing Assist cur‐
rently unavailable
See Owner's Manual Lane Keeping Assist or Active Lane Keeping Assist is deactivated
and temporarily inoperative. Possibl
ecauses:
R the windscreen is dirty in the camera' sfield of vision.
R visibility is impaired due to heavy rain, snow or fog.
R there are no lane markings for alonger period.
R the lane markings ar eworn ,dark or covered, e.g. by dirt or snow.
When the causes listed above no longer apply ,the displa ymes-
sage goes out.
Lan eKeeping Assist or Active Lan eKeeping Assist is operational
again.
If the display message does not disappear:
X Pull over and stop the vehicle safely as soon as possible, paying
attention to road and traffic conditions.
X Secure the vehicle against rollin gaway (Y page 181).
X Clean the windscreen. Lane Keeping
Assist inoperative
Active Lane Keep‐
in
gA ssist inoper‐ ative Lan
eKeeping Assist or Active Lan eKeeping Assist is faulty.
X Visit aqualified specialist workshop. Blin
dSpot Assist currently unavail‐
able See Owner's
Manual
Active Blind Spot
Assist currently
unavailable See
Owner's Manual Blind Spot Assist or Active Blind Spot Assist is temporarily inop-
erative.
Yo uh ave established the electrical connection between the trailer
and your vehicle.
X Press aon the steering wheel to confirm the display mes-
sage.
Blind Spot Assis torActive Blind Spo tAssist is deactivate dwhile
towing atrailer. Display messages
311On-boardcompu tera nd displays Z

Displa
ymessages Possible causes/consequences and
M Solutions
Blind Spot Assis
torActive Blind Spo tAssist is temporarily inop-
erative. Possible causes:
R the sensors are dirty.
R the function is impaired due to heavy rain or snow.
R the radar senso rsystem is outside the operating temperature
range.
R the radar sensor syste mistemporarily inoperative, e.g. due to
electromagneti cradiation emitted by nearby TV or radio sta-
tions or other sources of electromagnetic radiation.
The yellow 9indicator lamps also light up in the exterior mir-
rors.
When the causes listed above no longer apply ,the displa ymes-
sage goes out.
Blin dSpot Assist or Active Blin dSpot Assist is operational again.
If the display message does not disappear:
X Pull over and stop the vehicle safely as soon as possible, paying
attention to road and traffic conditions.
X Secure the vehicle against rollin gaway (Y page 181).
X Clean the sensors (Y page 370).
X Restart the engine. Blin
dSpot Assist inoperative
Active Blind Spot
Assist inoperative Blind Spot Assist or Active Blind Spot Assist is faulty.
Th
ey ellow 9indicator lamps also light up in the exterior mir-
rors.
X Visit aqualified specialist workshop. Park Assist cancel‐
led The driver'
sdoor is open and the driver's seat belt has not been
fastened.
X Repeat the parkin gprocess wit hthe seat belt fastened and the
driver's door closed. You hav
einadvertently touched the multifunction steerin gwheel
while steerin gintervention was active.
X While steerin gintervention is active, make sure not to touch the
multifunction steerin gwheel. The vehicle has star
tedtos kid and ESP ®
has intervened.
X Use Active Parking Assist again later (Y page 219).312
Display messagesOn-board computer and displays