key battery MERCEDES-BENZ GLE HYBRID 2017 Owners Manual

A Accident
Automat ic measures after an acc i-
dent ................................................ .1 0
Activating/deactivating cooling
with air dehumidification .................. .1 7
Air-conditioning system
see Climat e control
Authorized Mercedes-Benz Center
see Qualified specialist workshop
B Battery (high-voltage)
see High-voltage battery
Battery (vehicle)
Dis play message .............................. 47
Im portant safety notes .................... 52
Jump starting .................................. .5 3
Brake pedal
Pedal resistance/pedal travel .......... 11
Brakes
RBS warning lamp ............................ 49
Recuperative Brake System ............. 11
Warning lamp ................................... 48
Breakdown
see Towing away
C
Charging
see Charging the high-voltage bat-
tery (important safety notes)
Charging cable
Connecting ...................................... 33
Controls ........................................... 32
Important safety notes .................... 31
Indicator lamp .................................. 33
Removing ......................................... 34
Storing ............................................. 31
Warming up ..................................... 31
Charging the high-voltage battery
(important safety notes) ..................... 29
Climate control
Automatic climate control (3-
zone) ................................................ 15
Cooling with air dehumidification ..... 17 Dual-zone automatic climate con-
trol ................................................... 13
General notes .................................. 13
Immediate pre-entry climate con-
trol ................................................... 19
Overview of systems ........................ 13
Pre-entry climate control at
departure time ................................. 18
Pre-entry climate control via key ..... 17
Rear control panel ........................... 15
Refrigerant filling capacity ............... 54
Switching residual heat on/off ........ 17
COMAND
Menu overview ................................. 50
Consumption statistics (on-board
computer) ............................................ 43
Coolant (engine)
Checking the level ........................... 51
Displaying the temperature (on-
board computer) .............................. 43
Filling capacity ................................. 54
Temperature gauge .......................... 39
Cooling
see Climate control
D
Data
see Technical data
Display
Condition of charge ......................... 40
see Display messages
Display message
Hybrid drive system ......................... 45
Display messages
Engine .............................................. 47
Vehicle ............................................. 48
Driving safety systems
Recuperative Brake System ............. 11
DYNAMIC SELECT controller
PLUG-IN HYBRID operation .............. 22
E
ECO start/stop function
PLUG-IN HYBRID operation .............. 23
Emergency
Automatic measures after an acci-
dent ................................................. 10 Index 3

On-board computer
Display messages ........................... .4 5
HYBRID menu .................................. 43
Important safety notes .................... 38
Instrument cluster menu .................. 44
Menu overview ................................. 39
Settings menu .................................. 43
Trip menu ......................................... 40
Online access to the vehicle
Data protection ................................ 37
Functions ......................................... 37
General information ........................ .3 6
Internet ............................................ 37
Operating safety .................................... 7
Operator's Manual
Vehicle equipment ............................ .7
P PLUG-IN HYBRID operating
Electrical energy generated ............ .5 0
PLUG-IN HYBRID operation
Automatic engine start (ECO
start/stop function) ........................ .2 3
Automatic engine switch-off (ECO
start/stop function) ......................... 23
Charge level of the high-voltage
battery ............................................. 40
Charging the high-voltage battery .... 40
Displaying the total range and
electric range ................................... 43
Driving tips ...................................... 26
DYNAMIC SELECT controller ............ 22
ECO start/stop function .................. 23
Electric motor (power display) ......... 38
Energy flow display .......................... 40
Fuel consumption ............................ 50
Fuel consumption (COMAND) .......... 50
General notes .................................. 20
High-voltage battery (condition of
charge) ............................................ 40
Hybrid drive system overview ............ 8
HYBRID menu .................................. 43
Important safety notes .................... 20
Instrument cluster (power dis-
play) ................................................. 38
Noiseless start ................................. 22
Operating (on-board computer) ....... 38 Operating mode ............................... 21
Overrun mode .................................. 24
Parking ............................................ 37
Power display (electric motor) ......... 38
Problems ......................................... 25
Problems with SRS (supplemental
restraint system) .............................. 26
Problems with the combustion
engine .............................................. 25
Problems with the hybrid drive
system ............................................. 26
Problems with the Recuperative
Brake System ................................... 25
Pulling away ..................................... 22
READY display ................................. 22
Recuperative Brake System ............. 20
Route-based operating strategy ....... 24
Shifting manually ............................. 23
Starting ............................................ 22
When the vehicle is stationary ......... 26
Pre-entry cli mate control (via
SmartKe y)
Problems (malfunctions) .................. 18
Pre-entry climate control at time of
departure
General notes .................................. 18
Setting departure time ..................... 19
Pre-entry climate control via
SmartKey
General notes .................................. 17
Protection of the environment ............. 7
Q
QR code
Mercedes-Benz Guide App ................. 1
Qualified specialist workshop .............. 7
R
RBS (Recuperative Brake System)
Warning lamp ................................... 49
Recuperative Brake System
Driving safety systems ..................... 11
Important safety notes .................... 11
Refueling
Refueling process ............................ 27
Refueling process (PLUG-IN
HYBRID vehicles) ............................. 27 Index 5

In the vehicle Operator's Manual, information and recommendations can be found on: R
using automatic climate control R
using the rear control panel R
the individual functions
Observe these notes for optimal use of the automatic climate control.
The "Cooling with air dehumidification" function is even available when the engine is not running
( Y
page 17).
Use the residual heat function if you want to heat or ventilate the vehicle interior when the ignition
is switched off. The residual heat function can only be activated or deactivated with the ignition
switched off. When the ignition is switched on, the residual heat function is switched off
( Y
page 17).
Operating the climate control sys-
tems
Switching cooling with air dehumidi-
fication on/off If you deactivate the "Cooling with air-dehumid-
ification" function, the air inside the vehicle will
not be cooled. The air inside the vehicle will also
not be dehumidified. The windows can fog up
more quickly. Therefore, deactivate the cooling
with air-dehumidification function only briefly.
The "Cooling with air dehumidification" function
is available even when the engine is not running.
The air inside the vehicle is cooled and dehu-
midified according to the temperature selected.
Condensation may drip from the underside of
the vehicle when it is in cooling mode. This is
normal and not a sign that there is a malfunc-
tion. X
To activate: press the Z or V button.
The indicator lamp in the Z or V button
lights up. X
To deactivate: press the Z or V but-
ton.
The indicator lamp in the Z or V button
goes out. The "Cooling with air dehumidifica-
tion" function has a delayed switch-off fea-
ture.
Switching the residual heat on or off
It is possible to make use of the residual heat of
the engine to continue heating the stationary
vehicle for up to 30 minutesafter the engine has
been switched off. The heating time depends on
the set interior temperature. X
To activate: press the K or V button.
The indicator lamp in the K or V button
lights up. X
To deactivate: press the K or V but-
ton.
The indicator lamp in the K or V button
goes out.
The blower will run at a low speed regardless of
the airflow setting.
If you activate the residual heat function at high
temperatures, only the ventilation will be acti-
vated. The blower runs at medium speed.
Residual heat is deactivated automatically: R
after approximately 30 minutes R
when the ignition is switched on R
if the battery voltage drops
Pre-entry climate control via Smart-
Key
General notes Before getting in, the vehicle interior can be
briefly warmed or ventilated in advance and the
air from the air vents can be pre-cooled.
The high-voltage battery must be sufficiently
charged before "Pre-entry climate control via
SmartKey" can be activated.
When the vehicle is pre-cooled, the following
functions are activated if required: R
Climate control system R
Blower R
Seat ventilationOperating the climate control systems 17
Climate control

When the vehicle is pre-heated, the following
functions are activated if required: R
Climate control system R
Blower R
Seat heating
If you have activated ionization via the multime-
dia system, it is activated together with pre-
entry climate control.
Activating/deactivating Before "Pre-entry climate control via SmartKey"
can be activated, you must activate the function
using the on-board computer. X
To activate: unlock the vehicle with the
SmartKey or KEYLESS-GO.
The climate control functions are activated
for up to 5 minutes for pre-heating and pre-
cooling. X
To deactivate: "Pre-entry climate control via
SmartKey" deactivates automatically when
the engine is started.
The following functions remain active after the
engine is started: R
Seat heating (heating) R
Seat ventilation (ventilation) R
Ionization
Problems with "Pre-entry climate control via SmartKey" Problem
Possible causes/consequences and P Solutions
"Pre-entry climate con-
trol via SmartKey" can-
not be switched on or
has switched itself off. The condition of charge of the high-voltage battery is under the speci-
fied minimum condition of charge. X
Start the engine when the vehicle is at a standstill.
The engine powers the electric motor. The electric motor operates
as a generator. The high-voltage battery is being charged.
Further information on charging the high-voltage battery via: R
a mains socket ( Y
page 31)R
a charging station ( Y
page 35)R
a wallbox ( Y
page 34)
"Pre-entry climate control via SmartKey" has been started more than
twice with the engine switched off. X
Switch on the engine and let it run for more than ten seconds. X
Try again to switch on "Pre-entry climate control via SmartKey".
Pre-entry climate control at time of
departure
Important safety notes
G WARNING
If persons, particularly children are subjected
to prolonged exposure to extreme heat or
cold, there is a risk of injury, possibly even
fatal. Never leave children unattended in the
vehicle. General notes You can use the "Pre-entry climate control at
departure time" function to cool or heat the
vehicle interior if the engine is not running.
The "Pre-entry climate control at departure
time" function can be activated regardless of
whether or not the vehicle is connected to an
electric power supply. The condition of charge of
the high-voltage battery must be higher than the
specified minimum condition of charge, how-
ever.
When the vehicle is connected to an electric
power supply, priority is given to charging the
high-voltage battery to the specified minimum
charge. "Pre-entry climate control at departure
time" is only activated subsequently.18
Operating the climate control systems
Climate control

Display messages
Hybrid drive syste mDisplay messages
Possible causes/consequences an d P Solutions
r Vehicl e Operational
Switch the Ignition
Off Before Exitin g You are exitin g th e vehicle when it is in a ready-to-driv e state. The
READY indicator in th e multifunction display is on . A warnin g tone also
sounds.
If you leav e th e vehicle:X
Safeguar d th e vehicle against rollin g away (se e th e vehicle Opera-
tor' s Manual). X
Switc h of f th e ignition and remov e th e SmartKey.
If you do no t leav e th e vehicle:X
Switc h of f th e electrical consumers , e.g. automatic climat e control,
seat heating.
Please note th e following: th e electrical consumers are supplied by th e
12 V battery. If th e vehicle is lef t in a ready-to-driv e stat e fo r an exten-
ded period, it will switch of f once th e 12 V battery is almost empty. It
will then only be possible to start th e vehicle usin g a secon d battery
(jump-starting).
Change the curren t
drive progra m
before changing the
operating
mode. or E xit manual
drive progra m M
before changing the
operating mod e You hav e attempted to chang e th e operatin g mode when in automatic
drive program Sport, Individual (wit h activated Spor t characteristics )
or manual drive program M .X
Selec t th e Comfort , Slippery or Individual (wit h activated Comfort or
Ec o characteristics ) drive program ( Y
page 22).X
Selec t th e preferred operatin g mode HYBRID , E-MODE , E-SAVE or
CHARGE ( Y
page 21).
E-MODE Currently
Unavailable The condition of charg e of th e high-voltage battery has dropped to th e
lowe r limit and th e E-MODE operatin g mode has bee n switched off.
Driving wit h th e internal combustion engin e is activated and th e oper-
atin g mode switches to th e basi c HYBRID setting .X
Continue drivin g usin g th e internal combustion engine.
You can switch to th e E-SAVE or CHARGE operatin g mode as
require d ( Y
page 21).
If you selec t CHARGE , th e high-voltage battery is charged.
Once th e charg e level display fo r th e high-voltage battery has
increase d slightly, you can switch to th e E-MODE operatin g mode
again .
Onl y E-MODE Availa ‐
ble Power Limite d
Refuel Immediately The fue l tank has bee n run dry and th e combustion engin e has bee n
switched off.
A warnin g tone also sounds.
The vehicle will be powered by electrical energ y only. Performanc e is
restricte d and th e vehicle may accelerat e more slowly than normal.X
Refuel at th e nearest gas station without fail .
In th e "Total range and electric range" menu, you can display th e
approximat e range of th e vehicle ( Y
page 43).Display messages 45
On-board computer and displays Z

Vehicle Display messages
Possible causes/consequences and P Solutions
Auxiliary Battery
Malfunction The auxiliary battery for the automatic transmission is no longer being
charged. X
Visit a qualified specialist workshop. X
Until then, set the automatic transmission to position P before you
switch off the engine. X
Before leaving the vehicle, apply the electric parking brake.
; Pre-Entry Climate
Ctrl. (Via Smart‐
Key) Available
Again After Engine
Start With the engine switched off, you have attempted to switch on the pre-
entry climate control more than twice. X
Let the engine run for ten seconds.
After running the engine, the pre-entry climate control is opera-
tional again.
; Pre-Entry Climate
Ctrl. (Via Smart‐
Key) Inoperative HV
Battery Low The on-board voltage is too low. The pre-entry climate control cannot
be switched on. X
Drive for a longer distance.
The battery is being charged. When the condition of charge of the
high-voltage battery is over the specified minimum, pre-entry cli-
mate control is operational again.
Warning and indicator lamps in the instrument cluster
Safety systems The information "while the engine is running" given in the vehicle Operator's Manual regarding the
signaling behavior of a warning/indicator lamp corresponds to the READY driving status. When a
warning/indicator lamp lights up in the READY driving status with the corresponding information,
the causes/consequences and solutions given in the vehicle Operator's Manual also apply to your
vehicle.48
Warning and indicator lamps in the instrument cluster
On-board computer and displays