MERCEDES-BENZ M-Class 2002 W163 Comand Manual

47
IntroductionAudioTelephone Navigation Index
System settings
Slide the magazine into the CD changer until it clicks
into place (listen for the click). Close the sliding door
(3).Note:
Make sure that the tip of the arrow (1) on the side of the
magazine is pointing in the direction of the arrow (2).
Do not force the magazine into the changer. If the maga-
zine does not enter smoothly, please check for proper
orientation of the magazine.P82.85-2892-26
Mersedes-Benz
CD operation

48
IntroductionAudioTelephone Navigation Index
System settings
Menu overview - Single CD player (optional)
and CD changer (optional)
P82.85-7159-29
CD operation

49
IntroductionAudioTelephone Navigation Index
System settings
Single CD player
1Main CD menu for single CD player
2Icon for inserted CD in single CD player
3Scan function, scanning tracks, page 56
4Repeat function, page 56
5Random play, page 57
6Main sound settings menu,
Adjust sound settings, page 153
7Pause function, page 58
8Select time display, page 59CD changer
9Main CD menu for CD changer
10Icon for connected and loaded CD changer
11Number of selected CD
12Scan function, scanning tracks, page 56
13Repeat function, page 56
14Random play, page 57
15Main sound settings menu,
Adjust sound settings, page 153
16Select time display, page 59
17Pause function, page 58
CD operation

50
IntroductionAudioTelephone Navigation Index
System settings
Switching CD operation on and off
The navigation functions can be used while a CD is play-
ing in the CD-changer.
MCS with navigation system:
However navigation is only possible while a navigation
CD is inserted in the single CD player.MCS with single CD player
CD operation begins:
• automatically, by inserting a CD, page 42
The playback starts at Track 1.
• Press when a CD is already inserted in the CD
slot. The playback starts at Track 1.
Switch off CD playback:
Eject the CD, switch to the radio or tape mode or switch
off the MCS.
P82.85-7148-26
CD operation

51
IntroductionAudioTelephone Navigation Index
System settings
MCS with CD changer
CD changer operation begins:
• Press when CDs are inserted in the CD
changer, page 43.
The playback starts at Track 1.
The telephone and navigation functions can be used
while a CD is playing.
Switch off CD playback:
Switch to the radio or tape mode or switch off the MCS.MCS with single CD player and CD changer
If you press the MCS will start the last CD mode
which was activated. To start the other CD mode press
again.
Single CD player operation begins:
• automatically, by inserting a CD, page 42
The playing starts at Track 1.
• Press when a CD is already inserted in the CD
slot, page 42.
The playing starts at Track 1.
Switch off CD playback:
Eject the CD, switch to the radio, tape or CD changer
mode or switch off the MCS.
CD changer operation begins:
• Press when CDs are inserted in the CD
changer, page 43.
The playback starts at Track 1.
Switch off CD playback:
Switch to the radio, tape or single CD player mode or
switch off the MCS.
CD operation

52
IntroductionAudioTelephone Navigation Index
System settings
Following screen massages can appear after is
pressed:
• “NO CD” - there is no CD inserted, insert a CD.
• “CD ERROR” - the inserted CD can not be read,
maybe the CD is inserted wrong, is damaged or is
not an audio CD.
• Single CD mode: “NAVIGATION CD INSERTED ...” - a
navigation CD is inserted in the CD slot, replace the
CD and press CD again.• CD changer mode: “MAG. EMPTY” - there are no
CDs in the inserted magazine.
• CD changer mode: “NO MAGAZINE” - there is no
magazine in the CD changer.
•CD changer mode: “CHANGER ERROR” - have the
MCS and the CD changer checked by an authorized
Mercedes-Benz Center.
Note:
In the CD, radio and tape modes there will be symbols
on the display for an inserted CD (single CD player) or a
connected and loaded CD changer.P82.85-7149-26
CD operation

53
IntroductionAudioTelephone Navigation Index
System settings
Selecting CDs
(MCS with CD changer)
Selecting a CD with the number keypad:
Press a number key, e.g. , to select the correspond-
ing CD.
Note:
You can only select CD’s by pressing a number key from
to .The screen as shown above will appear for 4 seconds on
the display. The selected CD will be highlighted. If the
selected magazine slot is empty, the message “NO CD”
and the number of the selected slot will appear on the
screen. Then the next CD inserted will be selected.
The playback will begin with track 1 of the selected CD.
Note:
After the last track of the current CD has been played,
the next CD inserted in the magazine is selected and the
playback will continue with track 1.
P82.85-7148-26
P82.85-7150-26
CD operation

54
IntroductionAudioTelephone Navigation Index
System settings
Track select
Select a track with the joystick:
Push joystick to :
The next track starts to play back.
Push joystick to :
Play back the previous track. If more than 10 seconds of
playing time have elapsed, the current track is started
over.
Push the joystick as often as necessary to select the
desired track.Selecting a track with the number keypad:
Press and enter the number of the track you wish
to select , e.g. and . Track 2 is played.
P82.85-7148-26
P82.85-7151-26
CD operation

55
IntroductionAudioTelephone Navigation Index
System settings
Note:
To enter a single digit track number you can enter zero
(0) followed by the track number, e.g. 01or wait 4 sec-
onds to start automatically. When entering a two digit
number you must enter the second digit within 4 sec-
onds. Otherwise, the function will switch off and the
screen will return to the previous display.
If you enter a track number which is higher than the
last track on the disk “INVALID TRACK” will appear on
the display. The current track will keep playing without
interruption.Music seek
Push joystick to :
The CD will seek forward as long as you push the joy-
stick.
Push joystick to :
The CD will seek backward as long as you push the joy-
stick.
Note:
When the end /beginning of the CD is reached, the
music seek function stops.
P82.85-7148-26
CD operation

56
IntroductionAudioTelephone Navigation Index
System settings
Scanning
The tracks on a CD can be scanned one after the other
for 8 seconds each.
To start the function:
Press the softkey “SCAN”. The activated scan
function is shown by a highlighted “SCAN” on the dis-
play.
To stop the function:
Press the highlighted softkey “SCAN” or the joy-
stick in any direction.CD track repeat
Select the repeat function to repeat the current track.
The repeat function will continue until you switch the
function off.
P82.85-7133-26
P82.85-7134-26
CD operation