sunroof MERCEDES-BENZ METRIS 2020 MY20 Operator’s Manual

Resetting the side windows
You must reset the side windows if there has
been a malfunction or an interruption in the
voltage supply.
X Turn the SmartKey to position 2 in the igni-
tion lock.
X Pull the two power window switches and
hold for approximately one second after
closing the side window.
X If the side windows remain closed after the
button has been released, they have been
reset correctly. If this is not the case, repeat
the steps above for the open window. Problems with the side windows
G
WARNING
If you close a side window again immediately after it has been blocked, the side window closes
with increased or maximum force. The reversing function is then not active. Parts of the body
could be trapped in the closing area in the process. This poses an increased risk of injury or
even fatal injury.
Make sure that no parts of the body are in the closing area. To stop the closing process,
release the switch or push the switch again to reopen the side window. Problem
Possible causes/consequences and
M SolutionsYou cannot completely
open or close a side
window. If there are no objects or leaves in the window guide that prevent
the sliding sunroof from closing, there has been a malfunction or
the on-board voltage has been interrupted.
X Reset the side window ( Y page 86).86
Side windows
Opening and closing