phone MERCEDES-BENZ R320CDI 2007 R171 Owner's Manual

Contents
Power tilt/sliding sunroof* ................ 258
Opening and closing ..................... 258
Synchronizing ............................... 260
Panorama roof with power
tilt/sliding panel* .............................. 261
Roller sunblinds for the
panorama roof with power
tilt/sliding panel........................... 261
Opening and closing the
panorama roof with power
tilt/sliding panel........................... 262
Synchronizing the panorama
roof with power tilt/sliding
panel ............................................ 264
Driving systems ................................. 266
Cruise control............................... 266
Distronic*..................................... 271
Distance warning function*.......... 284
AIRMATIC* ................................... 285
Parktronic* (Parking assist) ......... 291
Rear view camera* ....................... 295Loading .............................................. 297
Roof rack*.................................... 297
Loading instructions..................... 298
Cargo tie-down rings .................... 299
Hooks........................................... 300
Expanding cargo compartment .... 301
Cargo compartment cover blind* . 306
Partition net* ............................... 308
Useful features .................................. 311
Storage compartments ................ 311
Parcel nets ................................... 315
Cup holders.................................. 316
Ashtrays* ..................................... 319
Cigarette lighter* ......................... 321
Power outlets ............................... 322
Rear center console* ................... 323
Heated steering wheel* ............... 326
Telephone* .................................. 327
Tele Aid* ...................................... 330
Garage door opener* ................... 337
Compass ...................................... 342
Floormats ..................................... 343
Infrared reflecting windshield* ..... 344
Operation......................................... 345
The first 1 000 miles (1 500 km) ........ 346
Driving instructions ........................... 347
Drive sensibly – save fuel............. 347
Drinking and driving ..................... 347
Pedals .......................................... 347
Power assistance ......................... 348
Brakes.......................................... 348
Driving off .................................... 351
Parking......................................... 351
Tires ............................................. 352
Hydroplaning................................ 352
Tire traction ................................. 353
Tire speed rating .......................... 353
Winter driving instructions ........... 354
Standing water............................. 355
Passenger compartment .............. 356
Driving abroad ............................. 356
Control and operation of radio
transmitters ................................. 357
Catalytic converter
(gasoline engine) .......................... 357

30 At a glance
Multifunction steering wheel
ItemPage
1Multifunction display159
Operating the control
system160
2Selecting the submenu or
setting the volume:
Press button
æup / to increase
çdown / to decrease
3Telephone*:
Press button
sto take a call
to dial
to redial
tto end a call
to reject an
incoming call
ItemPage
4Moving within a menu:
Press button
jfor next display
kfor previous display
5Menu systems:
Press button
èfor next menu
ÿfor previous menu
6Voice Control*1
7Voice Control*1
1Vehicles without Voice Control*: Button without
function.

33 At a glance
Overhead control panel
Overhead control panel
ItemPage
1Left reading lamp on/off153
2Automatic interior lighting153
3Rear interior lighting on/off153
4Front interior lighting on/off153
5Right reading lamp on/off153
6Front right interior lamp153
7Tilt/sliding sunroof* switch
Tilt/sliding panel* switch258
261
8Tele Aid* (emergency call
system) button332
9Vehicles without
telephone* installed:
Hands-free microphone for
TeleAid* (emergency call
system)330
ItemPage
aInterior rear view mirror212
bReading lamps153
cGarage door opener*337
dVehicles with telephone*
installed:
Hands-free microphone for
TeleAid* (emergency call
system) and telephone*330
eFront left interior lamp153

117 Controls in detail
Locking and unlocking
Important notes on using KEYLESS-GO*

You can also use the SmartKey with
KEYLESS-GO like a normal SmartKey
(
page 112).

You can combine KEYLESS-GO func-
tions with normal SmartKey functions
(e.g. unlocking with KEYLESS-GO and
locking with the ‹button).

Always carry the SmartKey with
KEYLESS-GO with you.

Never store the SmartKey with
KEYLESS-GO together with

electronic items such as a cellular
phone or another SmartKey with
KEYLESS-GO

metallic objects such as coins or
metal foil
Doing so could impair the function of
the KEYLESS-GO system.

To lock or unlock the vehicle, the
SmartKey with KEYLESS-GO must be
located outside the vehicle within
approximately 3 ft (1 m) of the respec-
tive door or the tailgate.

In order to start the engine with the
SmartKey with KEYLESS-GO:

The SmartKey with KEYLESS-GO
must be located in the vehicle.

The KEYLESS-GO start/stop button
must be inserted in the starter
switch (
page 41).

The brake pedal must be firmly de-
pressed. Do not depress the accel-
erator.

If the SmartKey with KEYLESS-GO is
positioned farther away from the vehi-
cle, the system may no longer recog-
nize the SmartKey with KEYLESS-GO.
The vehicle then cannot be locked or
the engine started via the KEYLESS-GO
system.
iCanada only:
This device complies with RSS-210 of Industry
Canada. Operation is subject to the following
two conditions:
(1) This device may not cause interference, and
(2) this device must accept any interference
received, including interference that may
cause undesired operation of the device.
Any unauthorized modification to this device
could void the user’s authority to operate the
equipment.
iYou can also open and close the power win-
dows, the tilt/sliding sunroof*, or the tilt/sliding
panel* (
page 261) using the SmartKey with
KEYLESS-GO, see “Summer opening feature”
(
page 254) and “Convenience closing fea-
ture” (
page 256).

160 Controls in detail
Control system
Multifunction steering wheel
The displays in the multifunction display
and the settings in the control system are
controlled by the buttons on the multifunc-
tion steering wheel.
Depending on the selected menu, pressing
the buttons on the multifunction steering
wheel will alter what is shown in the multi-
function display.
The information available in the multifunc-
tion display is arranged in menus, each
containing a number of functions or sub-
menus.
The individual functions are then found
within the relevant menu (radio or
CD operations under
AUDIO, for example).
These functions serve to call up relevant
information or to customize the settings
for your vehicle.
1Multifunction display
Operating the control system
2Selecting the submenu or setting
the volume:
Press button
æup/to increase
çdown/to decrease
3Telephone*:
Press button
sto take a call
to dial
to redial
tto end a call
to reject an incoming call
4Moving within a menu:
Press button
jfor next display
kfor previous display
5Menu systems:
Press button
èfor next menu
ÿfor previous menu
6Voice Control*1
1Vehicles without Voice Control*: Button without
function.
7Voice Control*1

165 Controls in detail
Control system
Menus, submenus and functions
Menu6Menu7Menu8Menu9MenuaMenub
DISTRONIC*Vehicle status
message memorySettingsDistance warning
function*Trip computerTelephone*
(page 271)(page 174)(page 176)(page 191)(page 191)(page 193)
Commands/submenus
Status and settingsCalling up
malfunction mes-
sages, warning mes-
sages, and system
status messages
stored in memoryResetting to factory
settingsDistance warning
function* on/offFuel consumption
statistics after startLoading phone book
Instrument cluster
submenuFuel consumption
statistics since the
last resetSearching for name
in phone book
Time/Date
submenuDistance to empty
Lighting submenu
Vehicle submenu
Comfort submenu*
iThe headings used in the menus table are
designed to facilitate navigation within the sys-
tem and are not necessarily identical to those shown in the control system displays. The first
function displayed in each menu will show you
which part of the system you are in.

193 Controls in detail
Control system
Resetting fuel consumption statistics
manually
Press buttonj ork repeatedly
until the message
After reset appears
in the multifunction display.
Press and hold the reset button in the
instrument cluster (
page 156) until
the value is reset to
0.Distance to empty
Press buttonÿ orè repeatedly
until the message
From start appears
in the multifunction display.
Press buttonj ork repeatedly
until the message
Range: appears in
the multifunction display.
The calculated remaining driving range
based on the current fuel tank level
appears in the multifunction display.
TEL menu*
iThe fuel consumption statistics reset auto-
matically to
0 when either of the following values
is exceeded:

distance covered:100 000 miles

time elapsed: 10 000 hours
Warning!G
A driver’s attention to the road must always
be his/her primary focus when driving. For
your safety and the safety of others, we
recommend that you pull over to a safe
location and stop before placing or taking a
telephone call. If you choose to use the tele-
phone while driving, please use the
hands-free device and only use the tele-
phone when weather, road and traffic
conditions permit.
Some jurisdictions prohibit the driver from
using a cellular telephone while driving a
vehicle.


194 Controls in detail
Control system
You can use the functions in the TEL menu
to operate your telephone, provided it is
connected to a hands-free system and
switched on.
Switch on the telephone and COMAND
system.
Press buttonÿ orè on the
multifunction steering wheel repeat-
edly until the message
Tel appears in
the multifunction display.Which messages will appear in the multi-
function display depends on whether your
telephone is switched on or off:

If the telephone is off, the message
Phone off appears in the multifunction
display.

If the telephone is on:
The telephone will then search for a
network. During this time the multi-
function display is empty.
As soon as the telephone has found a
network, the message
Ready appears in
the multifunction display.
This standby message indicates that your
telephone is ready for use and you can
operate it using the control system.Answering a call
When your telephone is ready to receive
calls, you can answer a call at any time. In
the multifunction display you will then see
the message:Press buttons.
You have answered the call. The
duration of the call appears in the
multifunction display.
Bear in mind that at a speed of just 30 mph
(approximately 50 km/h), your vehicle is
covering a distance of 44 feet
(approximately 14 m) every second.
Never operate radio transmitters equipped
with a built-in or attached antenna (i.e. with-
out being connected to an external antenna)
from inside the vehicle while the engine is
running. Doing so could lead to a malfunc-
tion of the vehicle’s electronic system,
possibly resulting in an accident and/or
personal injury.
iIf you do not wish to accept a call, press
buttont.


195 Controls in detail
Control system
Ending a call
Press buttont.
You have ended the call. The standby
message appears in the multifunction
display.
Dialing a number from the phone book
If your telephone is ready to receive calls,
you may select and dial a number from the
phone book at any time.
Press buttonÿ orè repeatedly
until the message
Tel appears in the
multifunction display.
Press buttonj ork.
The control system reads the phone
book which is stored in the telephone.
This may take several minutes. The
message
Please wait appears in the
multifunction display.
When the message
Please wait
disappears, the phone book has been
loaded.
Press buttonj ork repeatedly
until the desired name appears in the
multifunction display.
The stored names are displayed in
ascending or descending alphabetical
order.
1Name from the phone bookPress buttons.
The system dials the selected phone
number.

If the connection is successful and
this feature is supported by your
network provider, the name of the
party you are calling (if stored in
your phone book) and the duration
of the call will appear in the multi-
function display.

If no connection is made, the
control system stores the dialed
number in the redial memory.
iIf you press and holdj ork for
longer than 1 second, the system scrolls rapidly
through the list of names until you release the
button again.
Cancel the quick search mode by pressing
buttont.

196 Controls in detail
Control system
Redialing
The control system stores the most
recently dialed phone numbers. This
eliminates the need to search through your
entire phone book.
Press buttonÿ orè repeatedly
until the message
Tel appears in the
multifunction display.
Press buttons.
The first number in the redial memory
appears in the multifunction display.
Press buttonj ork repeatedly
until the desired name appears in the
multifunction display.
Press buttons.
The control system dials the selected
phone number.