reset MERCEDES-BENZ S CLASS 2019 User Guide

#Adjustthe front passenger seat usingthebuttons inthe door control panel intherearpassenger compartment (→page 93).
#Ensurethatthe indicator lamp in button1lights up.
Example:vehicles without arecliningrear seat
#Brieflypress memory button M andthenpress preset position button1,2 or 3 withinthree seconds.The settingsforthe front passenger seat andtherear seat arestored inthe selected pre‐set position.
%Vehicles withrecliningrear seat:You can‐notstore any settings onthejbuttonforadjustingthereclined position.
Calling up
#Press button1.Whenthe indicator lamp lights up,the frontpassenger seat is selected.
12 0Seats andstowing

Example:vehicles without arecliningrear seat
#Press and holdtherelevant preset positionbutton1,2 or 3 until bothseats are inthestored position.
%The preset positions inthe areaforthechauffeur mode can only be set whentheconditionsforthechauffeur mode are fulfil‐led (→page 99).
%Seat adjustment is interrupted as soon asyoureleasethe preset position button.The adjustment ofthe active multicontourseat isstill carried out.
%You can usetherear-compartmentchildsafety locktodeactivatethis function(→page 60).
Stowage areas
Notes on loadingthevehicle
&DANGERRisk ofexhaustgas poisoning
Combustion engines emit poisonousexhaustgases such as carbon monoxide. Exhaustgases can enterthevehicle interior ifthetrunk lid is open whenthe engine isrunning,especially ifthevehicle is in motion.
#Always switch offthe engine beforeopeningthe trunk lid.
#Never drive withthe trunk lid open.
&WARNINGRisk of injuryfrom unsecureditems inthevehicle
If objects, luggage or loads are not securedor not secured sufficiently,theycould slip,tipover or bethrown around andthereby hitvehicle occupants.
There is arisk of injury,particularly intheevent of sudden braking or a suddenchangein direction.
#Alwaysstowobjects in such awaythattheycannot bethrown around.
#Beforethe journey,secure objects, lug‐gageor loads against slipping or tippingover.
&WARNINGRisk of injuryduetoobjectsbeingstowed incorrectly
Ifyou do not adequatelystowobjects inthevehicle interior,theycould slip or betossedaround andtherebystrikevehicle occupants.In addition, cup holders, openstowagespaces and mobile phone brackets cannot
Seats andstowing121

#Activatesor deactivateSthe function.TheDisplay,FrontandRearzones can be setseparately.
%Setting brightness zones is notavailablefortheRear Seat Entertainment System.
Activating multi-color lighting
#SelectMulti-color.
#Activatesor deactivateSthe function.There areten preset color combinationsavailable.
Activating multi-color animation
#SelectMulti-color Anim..
#Activatesor deactivateSthe function.Thechosen color combinationchanges atpredefined intervals.
Activating dependency on air conditioningsettings
#SelectClimate.
#Activatesor deactivateSthe function.Ifchanges are madetothetemperature set‐ting inthevehicle,the color ofthe ambientlightingchanges briefly.
Activatingwelcome lighting
#SelectWelcome.
#Activatesor deactivateSthe function.Whenthevehicle is unlocked, a special inte‐rior lighting sequenceruns.
Setting the interior lighting switch-off delaytime
Multimedia system:
,Vehicle.÷Light Settings.Int.
Light Switch Off
#Setthe switch-off delay time.
Windshield wiper and windshieldwashersystem
Switchingthe windshield wipers on/off
GZWindshield wiper off
HbIntermittent wiping, normal
IcIntermittent wiping, frequent
Light and visibility151

&WARNINGRisk of accident duetomis‐judgment of distances when usingthepassenger mirror
The outside mirror onthe front-passengersidereflects objects on a smaller scale. Theobjects in view are infact closerthantheyappear.
As aresult,you may misjudgethe distancebetweenyou andtheroad user drivingbehindyou,forexample, whenchanginglanes.
#Therefore, always lookoveryour shoul‐der in ordertoensurethatyou areaware ofthe actual distance betweenyou andtheroad users driving behindyou.
Foldingthe outside mirrorsin/out
#Brieflypress switch1.
Resettingthe outside mirrors
%Ifthe battery has been disconnected or com‐pletely discharged,the outside mirrorsmustbereset. Onlythen willthe automatic mirrorfolding functionworkproperly.
#Brieflypress switch1.
Adjusting the outside mirrors
#Selecttherequired mirror using button3or4.
#Use button2tosetthe position ofthe mir‐roryou haveselected.
Engagingthe outside mirrors
#Press and hold button1.You will hear a click andthe mirror will audi‐bly engage in position. The mirror is set inthe correct position.
Automatic anti-glare mirrorsfunction
&WARNINGRisk of burns and poisoningduetothe anti-glare mirror electrolyte
Electrolyte may escape iftheglass in anautomatic anti-glare mirror breaks.
The electrolyte is harmful and causes irrita‐tion. It mustnot come into contact withyourskin,eyes,respiratory organs or clothing orbe swallowed.
Light and visibility15 5

RGrayradarwaves nexttovehicle: Blind SpotAssist activated
RGreenradarwaves nexttovehicle: Blind SpotAssist active
RActive Distance AssistDISTRONIC displays(→page 203).
Calling up displaysontheTrip menu
On-board computer:
,Trip
%Whenyou havethestyle settoClassic,youcan view information onthe journey intheleft-hand area ofthe Instrument Display.
#Toselect a display:swipe upwards or down‐wards onthe left-handTouch Control.
DisplaysintheTripmenu:
RStandard display
RRange and current fuel consumption
Arecuperation displayis alsoavailableforcertain engines. Ifthere is only a smallamount of fuel left inthe fueltank,the dis‐
play showsavehicle beingrefueled insteadoftherange.
RECO display (→page174)
RTrip computerFrom StartandFrom Reset
RDigital speedometer
%The digital speedometer only appears intheSportandSupersportstyles.
Example:standard display
1Trip distance
2Total distance
Example: trip computer
1Total distance
2Driving time
3Average speed
4Average fuel consumption
Instrument Display and on-board computer257

Resettingvalues ontheTrip menu ofthe on-board computer
On-board computer:
,Trip
%The spelling may differ inthe main menu dis‐played. Therefore, observethe menuover‐viewforthe Instrument Display(→page 252).
You canresetthevalues ofthefollowing func‐tions:
RTrip distance
RTrip computer "Fromstart" and "Fromreset"
RECO display
#Toselectthe functiontobereset:swipeupwards or downwards onthe left-handTouch Control.
#Pressthe left-handTouch Control.
#SelectYes.
#Pressthe left-handTouch Control.
Ifyou press and holdthe left-handTouch Con‐trol,the function will bereset immediately.
Calling up navigation instructions onthe on-board computer
On-board computer:
,Navigation
Example: nochange of direction announced
1Distancetothe next destination
2Estimated arrival time
3Distancetothe nextchange of direction
4Currentroad
Example:change of direction announced
1Roadtowhichthechange of direction leads
2Distancetothechange of direction
3Change-of-direction symbol
4Recommended lane and new lane during achange of direction (white)
5Possible lane
6Lane notrecommended (darkgray)
Further possible displaysintheNavigationmenu:
RCalculate New RouteorCalculating Route...:a newroute is being calculated.
258Instrument Display and on-board computer

RRoad Not Mapped:theroad is unknown, e.g.newly builtroads.
RNo Route: noroute could be calculatedtothe selected destination.
RK:you havereachedthe destination or anintermediate destination.
#Toexitthe menu:pressthe back button onthe left.IntheNavigationmenu,you can alsostart navi‐gationtoone ofthe previous destinations:
#Pressthe left-handTouch Control.
#Toselectthe destination:swipe upwards ordownwards onthe left-handTouch Control.
#Pressthe left-handTouch Control.Route guidance isstarted.
Ifroute guidance has already been activated,arequest will appear asking whetheryouwishtoendthe currentroute guidance.
#SelectYes.
#Pressthe left-handTouch Control.Route guidance isstarted.
Selectingradiostations usingthe on-boardcomputer
On-board computer:
,Radio
1Frequencyrange
2Station
3Name of track
4Name of artist
Whenyou select astation inthe memory pre‐sets,the preset appears nexttothestationname. Whenyou select a savedstation inthefrequencyrange, an asterisk appearsnexttothestation name.
#Toselect aradiostation:swipe upwards ordownwards onthe left-handTouch Control.
Selecting frequencyrange orstation presetlist
#Pressthe left-handTouch Control.
#Toselectthe frequencyrange/stationpreset list:swipe upwards or downwards onthe left-handTouch Control.
#Pressthe left-handTouch Control.
Instrument Display and on-board computer259

Addingfavorites
Adding predefinedfavorites
#Pressthe©button.The main functions are displayed.
#Navigate downwards twice.TheFavorites menu appears.
#SelectNew Favorite.The categories are displayed.
#Select a category.Thefavorites are displayed.
#Select afavorite.
#Storethefavoriteatthe desired position.If afavoritehas already been added atthisposition, it will beoverwritten.
Example: addingyourownfavorites
#SelectVehicle.
#SelectFull Screen: Consumption.
#Press and holdthe©button untilthefavorites are displayed.
#Storethefavoriteatthe desired position.
IfNo function available for saving.is shown,theselected function cannot be added.
Renamingfavorites#Pressthe©button.The main functions are displayed.
#Navigate downwards once.
#Select afavorite.
#Navigate downwards once.TheFavorites menu appears.
#SelectRename.
#Enterthecharacters.
#Toconfirmthe entry:select¡.
Movingfavorites#Pressthe©button.The main functions are displayed.
#Navigate downwards once.
#Select afavorite.
#Navigate downwards once.TheFavorites menu appears.
#SelectMove.
#Movethefavorite tothe desired position.If afavoritehas already been added atthisposition, it will beoverwritten.
Deletingfavorites#Pressthe©button.The main functions are displayed.
#Navigate downwards once.
#Select afavorite.
#Navigate downwards once.TheFavorites menu appears.
#Todelete:selectDelete.
#SelectYes.
#Torestoreallfavorites:selectReset All.A promptappears.
#SelectYes.Thefavorites areresettothefactory set‐tings.
Multimedia system283

Activating/deactivating PIN protection
Multimedia system:
,System.PIN Protection
Settingthe PIN
#SelectSet PIN.
#Enter afour-digit PIN.
#Enterthefour-digit PIN again.If bothPINs match, PIN protection is active.
Changingthe PIN
Requirements
RA current PIN mustbe set.
#SelectChange Settings.
#Enterthe current PIN.
#SelectChange PIN.
#Set a new PIN.
Activating PIN protectionfor dataexport
#SelectChange Settings.Confirm with the PIN.
#SelectProtect Data Export.Activatesor deactivateSthe function.
Unblockingthe PIN
Requirements:
RThere is an Internet connection.
RA Mercedes me accountexists at http://www.mercedes.me.
RThePersonalizationservice is active(→page 296).
Ifthe PIN has been entered incorrectlythreetimes,the PIN will be blocked.You can have asingle-use password sentto you viatheMercedes me connect online portaltoresetthePIN protection.
#SelectUnblock PIN.
#Enterthe single-use password.PIN protection isreset, andyou can set anew PIN.
%Alternatively,you can havePIN protectionreset at an authorized Mercedes-Benz Cen‐ter.
User profile
Setting a user profileMultimedia system:
,System.gPersonalization
Displaying a user profile whenstartingIfthis function is active, a promptappears whenstartingthe system asking which user profiletouse.
#SelectDisplay Profile Selection after Start.
#Activatesor deactivateSthe function.
Selecting a user profile
#SelectGuest Profileor individual profile;.
%Some settings fromthe user profile are onlyloaded whenthevehicle isstationary orwhenthe ignition is switched on.
Automatic synchronizationEach timethe ignition is switched off or on,theindividual user profiles are synchronized onthemultimedia system and onthe server.Thisensuresthatthe latest user profiles are alwaysavailable.
Multimedia system295

As soon as an updateisavailablefor download,a corresponding message appearsonthe mediadisplay.
You havethefollowing selection options:
RDownload
The update will be downloaded inthe back‐ground.
RDetails
Information aboutthe pending systemupdate is displayed.
RLater
The update can be downloaded manually at alater time (→page 297).
Ifthe download is completed andthe update isreadyfor installation,you will be informed ofthisafterthe next ignition cycle,forexample.
%Parkthevehicle safely in a suitable locationbeforestartingthe installation.
Requirementsforthe installation:
RThe ignition is switched on.
RThe engine is notrunning.
RNotes andwarnings havebeenread andaccepted.
RThe parking brake is applied.
If allrequirements are met,the update will beinstalled. The multimedia system cannotbeoperated whilethe update is being installed andvehicle functions arerestricted.
If errorsshould occur duringthe installation,themultimedia system automatically attemptstorestorethe previousversion. Ifrestoration ofthepreviousversion is not possible, a symbolappears onthe center console display.Pleaseconsult aqualified specialistworkshoptoresolvethe problem.
Reset function
Multimedia system:
,System.Reset
Personal data is deleted,forexample:
RStation presets
RConnected mobile phones
#SelectYes.
If PIN protection is activated, a promptappearsasking ifyou also wishtorestorethistothefac‐torysettings during areset.
#SelectYes.
#Enterthe current PIN.The PIN isreset.
or
#SelectNo.The current PINstaysthe same afterreset‐ting.
%Ifyou haveforgottenyour PIN, an authorizedMercedes-Benz Center can deactivatethePIN protectionforyou.
A promptappears again asking whetheryoureally wishtoreset.
#SelectYes.The multimedia system isresettothefactorysettings.
298Multimedia system