stop start MERCEDES-BENZ SL CLASS 2019 Service Manual
[x] Cancel search | Manufacturer: MERCEDES-BENZ, Model Year: 2019, Model line: SL CLASS, Model: MERCEDES-BENZ SL CLASS 2019Pages: 330, PDF Size: 16.53 MB
Page 199 of 330
XEstablish a Bluetooth®connection to themultimedia system (Ypage 246).
XPress the Yor ebutton on the steer-ing wheel to select theTelTelmenu.
You will see one of the following display mes-sages in the multifunction display:
RPhone READYPhone READYor the name of the networkprovider: the mobile phone has found a net-work and is ready to receive.
RPhone No ServicePhone No Service: there is no networkavailable or the mobile phone is searchingfor a network.
Accepting a call
If someone calls you when you are in theTelTelmenu, a display message appears in the multi-function display.
You can accept a call at any time regardless ofthe menu selected.
XPress the abutton on the steering wheelto accept an incoming call.
Rejecting or ending a call
XPress the vbutton on the steering wheelto reject or end a call.
Selecting an entry in the phone book
XPress the Yor ebutton on the steer-ing wheel to select theTelTelmenu.
XPress the c, dor vbutton toswitch to the phone book.
XAuthorize access to the phone book on thephone.
XPress dor cto select the names oneafter the other.
or
XTo start rapid scrolling:press and holdthe dor cbutton for longer than onesecond.The names in the phone book are displayedquickly one after the other.
Rapid scrolling stops when you release thebutton or reach the end of the list.
XIf only one telephone number is storedfor a name:press the aor vbuttonto start dialing.
or
XIf there is more than one number for aparticular name:press the aor vbutton to display the numbers.
XPress the cor dbutton to select thenumber you want to dial.
XPress the aor vbutton to start dial-ing.
or
XTo exit the telephone book:press the vor 8button.
Redialing
The on-board computer saves the last namesor numbers dialed in the redial memory.
XPress the Yor ebutton on the steer-ing wheel to select theTelTelmenu.
XPress the abutton to switch to theredial memory.
XPress the cor dbutton to select thedesired name or number.
XPress the aor vbutton to start dial-ing.
or
XTo exit the redial memory:press the vor 8button.
Assistance menu
Introduction
Depending on your vehicle's equipment, in theDriveAssistDriveAssistmenu, you have the followingoptions:
RDisplaying the assistance graphic(Ypage 198)
RMercedes-AMG vehicles: setting the vehiclelevel (Ypage 170)
RActivating/deactivating Active SteeringAssist (Ypage 198)
RActivating/deactivating Active Brake Assist(Ypage 198)
RActivating/deactivating Active Brake Assistwith cross-traffic function (Ypage 198)
RActivating/deactivating ATTENTION ASSIST(Ypage 198)
RActivating/deactivating Active Blind SpotAssist (Ypage 199)
RActivating/deactivating Active Lane KeepingAssist (Ypage 199)
Menus and submenus197
On-board computer and displays
Z
Page 206 of 330
Stopping the RACE TIMER
XPress the 8button on the steeringwheel.
XConfirmYesYeswith v.
The RACE TIMER interrupts timing if you stopthe vehicle and turn the SmartKey to position Gin the ignition lock. If you turn the Smart-Key to position3and then press vto con-
firmStartStart, timing is continued.
Resetting the current lap
XStop the RACE TIMER.
XPress the Yor ebutton to selectReset LapReset Lap.
XPress vto reset the lap time to "0".
Deleting all laps
If you switch off the engine, the RACE TIMER isreset to "0" after 30 seconds. All laps aredeleted.
You cannot delete individual stored laps. If youhave stopped 16 laps, the current lap does nothave to be reset.
XReset the current lap.
XPress vto confirmResetReset.Reset Race-Timer?Reset Race-Timer?appears in the multi-function display.
XPress the dbutton to selectYesYesandpress the vbutton to confirm.All laps are deleted.
Overall statistics
CRACETIMER overall evaluation
DTotal time driven
Page 213 of 330
Display messagesPossible causes/consequences and P PSolutions
The yellow $warning lamp lights up and the red I(USAonly) or $(Canada only) indicator lamp flashes.
It is not possible to apply the electric parking brake manually.
XShift the transmission to position ].
XVisit a qualified specialist workshop.
'(USA only)
M(Canada only)
Check Brake FluidCheck Brake FluidLevelLevel
There is not enough brake fluid in the brake fluid reservoir.
In addition, the '(USA only) or M(Canada only) warninglamp lights up in the instrument cluster and a warning tone sounds.
GWARNING
The braking effect may be impaired.
There is a risk of an accident.
XPull over and stop the vehicle safely as soon as possible, payingattention to road and traffic conditions. Do not continue drivingunder any circumstances.
XSecure the vehicle against rolling away (Ypage 146).
XConsult a qualified specialist workshop.
XDo not add brake fluid. This does not correct the malfunction.
&
Check Brake PadCheck Brake PadWearWear
The brake pads/linings have reached their wear limit.
XVisit a qualified specialist workshop.
PRE-SAFE Inopera‐PRE-SAFE Inopera‐tive See Opera‐tive See Opera‐tor's Manualtor's Manual
Important functions of PRE-SAFE®have failed. All other occupantsafety systems, e.g. air bags, remain available.
XVisit a qualified specialist workshop immediately.
Active BrakeActive BrakeAssist FunctionsAssist FunctionsCurrently LimitedCurrently LimitedSee Operator's Man‐See Operator's Man‐ualual
Active Brake Assist is temporarily inoperative.
Possible causes are:
Rthe radar sensor system is temporarily inoperative, e.g. due toelectromagnetic radiation emitted by nearby TV or radio stationsor other sources of electromagnetic radiation
Rthe system is outside the operating temperature range
Rthe on-board voltage is too low
When the causes stated above no longer apply, the display messagedisappears.
Active Brake Assist is operational again.
If the display message does not disappear:
XPull over and stop the vehicle safely as soon as possible, payingattention to road and traffic conditions.
XSecure the vehicle against rolling away (Ypage 146).
XRestart the engine.
Displaymessages211
On-b oard computer and displays
Z
Page 214 of 330
Display messagesPossible causes/consequences and P PSolutions
Active BrakeActive BrakeAssist FunctionsAssist FunctionsLimited See Opera‐Limited See Opera‐tor's Manualtor's Manual
Active Brake Assist is unavailable due to a malfunction.
XVisit a qualified specialist workshop.
Active BrakeActive BrakeAssist FunctionsAssist FunctionsCurrently LimitedCurrently LimitedSee Operator's Man‐See Operator's Man‐ualual
Active Brake Assist with cross-traffic function or PRE‑SAFE®PLUS isdeactivated and temporarily inoperative.
Possible causes are:
Rthe system is outside the operating temperature range
Rthe on-board voltage is too low
Rthe radar sensor system is temporarily inoperative, e.g. due toelectromagnetic radiation emitted by nearby TV or radio stationsor other sources of electromagnetic radiation
RMercedes-AMG vehicles: ESP®is deactivated
When the causes stated above no longer apply, the display messagedisappears.
Active Brake Assist with cross-traffic function and PRE‑SAFE®PLUSare functional again.
XPull over and stop the vehicle safely as soon as possible, payingattention to road and traffic conditions.
XSecure the vehicle against rolling away (Ypage 146).
XRestart the engine.
XMercedes-AMG vehicles: switch ESP®on again (Ypage 68).
Active BrakeActive BrakeAssist FunctionsAssist FunctionsLimited See Opera‐Limited See Opera‐tor's Manualtor's Manual
Active Brake Assist with cross-traffic function or PRE‑SAFE®PLUS isnot available due to a malfunction.
XVisit a qualified specialist workshop.
212Displaymessages
On-b oard computer and displays
Page 215 of 330
Display messagesPossible causes/consequences and P PSolutions
Radar SensorsRadar SensorsDirty See Opera‐Dirty See Opera‐tor's Manualtor's Manual
The radar sensor system is malfunctioning.
Possible causes are:
Rdirt on sensors
Rheavy rain or snow
Rwhen driving on inter-urban roads without traffic or infrastructure,e.g. in desert-like areas
At least one driving system or driving safety system is malfunction-ing or is temporarily unavailable:
RActive Brake Assist
RActive Brake Assist with cross-traffic function
RActive Distance Assist DISTRONIC
RActive Steering Assist
RActive Lane Keeping Assist
RActive Blind Spot Assist
RPRE-SAFE®PLUS
If the radar sensor system in front is dirty, Active Blind Spot Assistwill not perform a course-correcting brake application.
Once the cause of the problem is no longer present, the driving anddrive safety systems will be available again. The display messagedisappears.
If the display message does not disappear:
XPull over and stop the vehicle safely as soon as possible, payingattention to road and traffic conditions.
XSecure the vehicle against rolling away (Ypage 146).
XSwitch off the engine.
XClean all sensors (Ypage 275).
XRestart the engine.The display message disappears.
g
Malfunction Ser‐Malfunction Ser‐vice Requiredvice Required
The roll bars are faulty.
GWARNING
The roll bars will then possibly not be extended in the event of anaccident.
There is an increased risk of injury.
XVisit a qualified specialist workshop immediately.
Displaymessages213
On-b oard computer and displays
Z
Page 225 of 330
Display messagesPossible causes/consequences and P PSolutions
Active Lane Keep‐Active Lane Keep‐ing Assist Cur‐ing Assist Cur‐rently Unavailablerently UnavailableSee Operator's Man‐See Operator's Man‐ualual
Active Lane Keeping Assist is deactivated and temporarily inopera-tive.
Possible causes are:
Rthe windshield in the camera's field of vision is dirty
Rvisibility is impaired due to heavy rain, snow or fog
Rthere have been no lane markings for an extended period
Rthe lane markings are worn away, dark or covered up, e.g. by dirtor snow
When the causes stated above no longer apply, the display messagedisappears.
Active Lane Keeping Assist is operational again.
If the display message does not disappear:
XPull over and stop the vehicle safely as soon as possible, payingattention to road and traffic conditions.
XSecure the vehicle against rolling away (Ypage 146).
XClean the windshield.
Active Lane Keep‐Active Lane Keep‐ing Assist Inopera‐ing Assist Inopera‐tivetive
Active Lane Keeping Assist is malfunctioning.
XVisit a qualified specialist workshop.
Active Blind SpotActive Blind SpotAssist CurrentlyAssist CurrentlyUnavailable SeeUnavailable SeeOperator's ManualOperator's Manual
Active Blind Spot Assist is temporarily inoperative.
Possible causes are:
Rthe radar sensor system is outside the operating temperaturerange
Rthe radar sensor system is temporarily inoperative, e.g. due toelectromagnetic radiation emitted by nearby TV or radio stationsor other sources of electromagnetic radiation
The yellow cindicator lamps also light up in the exterior mirrors.
When the causes stated above no longer apply, the display messagedisappears.
Active Blind Spot Assist is operational again.
If the display message does not disappear:
XPull over and stop the vehicle safely as soon as possible, payingattention to road and traffic conditions.
XSecure the vehicle against rolling away (Ypage 146).
XClean the sensors (Ypage 275).
XRestart the engine.
Active Blind SpotActive Blind SpotAssist InoperativeAssist InoperativeActive Blind Spot Assist is malfunctioning.
The yellow cindicator lamps also light up in the exterior mirrors.
XVisit a qualified specialist workshop.
Displaymessages223
On-b oard computer and displays
Z
Page 226 of 330
Display messagesPossible causes/consequences and P PSolutions
Active ParkingActive ParkingAssist CanceledAssist CanceledThe driver's door is open and the driver's seat belt has not been fas-tened.
XRepeat the parking process with the seat belt fastened and thedriver's door closed.
You have inadvertently touched the multifunction steering wheelwhile steering intervention was active.
XWhile steering intervention is active, make sure that the multi-function steering wheel is not touched unintentionally.
The vehicle has started to skid and ESP®has intervened.
XUse Active Parking Assist again later (Ypage 175).
Active ParkingActive ParkingAssist InoperativeAssist InoperativeYou have just carried out a large number of turning or parkingmaneuvers.
Active Parking Assist will become available again after approx-imately ten minutes (Ypage 175).
XPull over and stop the vehicle safely as soon as possible, payingattention to road and traffic conditions.
XSwitch off and restart the engine.
If the multifunction display still shows the display message:
XVisit a qualified specialist workshop.
Active Parking Assist is malfunctioning.
XVisit a qualified specialist workshop.
Active ParkingActive ParkingAssist FinishedAssist FinishedThe vehicle is parked. A warning tone also sounds.
The display message disappears automatically.
Active DistanceActive DistanceAssist OffAssist OffActive Distance Assist DISTRONIC was deactivated (Ypage 156).
If it was deactivated automatically, a warning tone also sounds.
Active DistanceActive DistanceAssist Now Availa‐Assist Now Availa‐bleble
Active Distance Assist DISTRONIC is operational again after havingbeen temporarily unavailable. You can now reactivate Active Dis-tance Assist DISTRONIC (Ypage 156).
224Displaymessages
On-b oard computer and displays
Page 227 of 330
Display messagesPossible causes/consequences and P PSolutions
Active DistanceActive DistanceAssist CurrentlyAssist CurrentlyUnavailable SeeUnavailable SeeOperator's ManualOperator's Manual
Active Distance Assist DISTRONIC is temporarily inoperative.
Active Steering Assist is also temporarily inoperative.
Possible causes are:
Rthe radar sensor system is temporarily inoperative, e.g. due toelectromagnetic radiation emitted by nearby TV or radio stationsor other sources of electromagnetic radiation
Rthe system is outside the operating temperature range
Rthe on-board voltage is too low
A warning tone also sounds.
When the causes stated above no longer apply, the display messagedisappears.
Active Distance Assist DISTRONIC is operational again.
If the display message does not disappear:
XPull over and stop the vehicle safely as soon as possible, payingattention to road and traffic conditions.
XSecure the vehicle against rolling away (Ypage 146).
XRestart the engine.
Active DistanceActive DistanceAssist InoperativeAssist InoperativeActive Distance Assist DISTRONIC is faulty.
The following may have also failed:
RBrake Assist with cross-traffic function
RActive Brake Assist with cross-traffic function
RActive Steering Assist
A warning tone also sounds.
XVisit a qualified specialist workshop.
Act. DistanceAct. DistanceAssist SuspendedAssist SuspendedYou have depressed the accelerator pedal. Active Distance AssistDISTRONIC is no longer controlling the speed of the vehicle.
XRemove your foot from the accelerator pedal.
Distance Assist--Distance Assist--- mph- mphA condition for activating Active Distance Assist DISTRONIC has notbeen met.
XCheck the activation conditions for Active Distance AssistDISTRONIC (Ypage 156).
Display messages225
On-board computer and displays
Z
Page 229 of 330
Tires
Display messagesPossible causes/consequences and P PSolutions
Please CorrectPlease CorrectTire PressureTire PressureThe tire pressure is too low in at least one of the tires, or the tirepressure difference between the wheels is too great.
XCheck the tire pressures at the next opportunity (Ypage 299).
XIf necessary, correct the tire pressure.
XRestart the tire pressure monitor (Ypage 301).
Tire Pressure SoonTire Pressure SoonThe tire pressure in one or more tires has dropped significantly. Thewheel position is shown in the multifunction display.
A warning tone also sounds.
GWARNING
Tire pressures that are too low pose the following hazards:
Rthey may burst, especially as the load and vehicle speed increase
Rthey may wear excessively and/or unevenly, which may greatlyimpair tire traction.
Rthe driving characteristics, as well as steering and braking, maybe greatly impaired
There is a risk of an accident.
XStop the vehicle without making any sudden steering or brakingmaneuvers. Pay attention to the traffic conditions as you do so.
XSecure the vehicle against rolling away (Ypage 146).
XCheck the tires and, if necessary, follow the instructions for a flattire (Ypage 278).
XCheck the tire pressure (Ypage 299).
XIf necessary, correct the tire pressure.
Warning Tire Mal‐Warning Tire Mal‐functionfunctionThe tire pressure in one or more tires has dropped suddenly. Thewheel position is shown in the multifunction display.
GWARNING
Driving with a flat tire poses a risk of the following hazards:
Ra flat tire affects the ability to steer or brake the vehicle
Ryou could lose control of the vehicle.
Rcontinued driving with a flat tire will cause excessive heat build-up and possibly a fire
There is a risk of an accident.
XStop the vehicle without making any sudden steering or brakingmaneuvers. Pay attention to the traffic conditions as you do so.
XSecure the vehicle against rolling away (Ypage 146).
XCheck the tires and, if necessary, follow the instructions for a flattire (Ypage 278).
Displaymessages227
On-b oard computer and displays
Z
Page 233 of 330
Display messagesPossible causes/consequences and P PSolutions
Y
Vario-Roof LoweringVario-Roof Lowering
The roof is not fully opened or closed. The hydraulics are depressur-ized.
XFully open or close the roof (Ypage 91).
Y
Open/Close Vario-Open/Close Vario-Roof CompletelyRoof Completely
The roof is not locked.
XPull over and stop the vehicle safely as soon as possible, payingattention to road and traffic conditions.
XPush or pull and hold the roof switch until the roof is fully open orclosed (Ypage 91).
Y
Start Engine SeeStart Engine SeeOperator's ManualOperator's Manual
The on-board voltage is too low.
XStart the engine.
XAfter approximately ten seconds, repeat the opening or closingprocedure (Ypage 91).
The roof has been opened and closed several times in a row. Theroof drive has been switched off automatically for safety reasons.
You can open and close the roof again after approximately tenminutes.
XSwitch off the ignition and turn it back on.
XRepeat the opening or closing procedure (Ypage 91).
Close Rear SideClose Rear SideWindowsWindowsYou leave the vehicle and at least one rear side window is open.
XClose the side windows (Ypage 88).