lock MERCEDES-BENZ SL CLASS 2020 Owners Manual

0087
Retaining strip, e.g. for apark inglottick et
0085 Van ity mir ror
0083 Mirror cover Asht
ray X
To open :open stowage compar tment0043
(Y page 253).
X To rem ove theinser t:pull insert 0044upin
th edire ction ofthearr ow, outofthecup
hold er.
X To re-inst alltheinser t:push insert 0044on
th elef t-han dside intoth ecup hold er.
i On
lyre- ins tallins ert 0044onthelef t-han d
side ofthecup hold er. Ciga
retteligh ter G
WAR
NING
You canburn yours elfifyou touch thehot
heat ingelem entor thesoc ketof thecig a-
ret teligh ter.
In addit ion,flam mabl emat erials can ignite
if:
R thehot cigaret teligh terfalls
R ach ild hold sth ehot cigaret teligh terto
obj ects,for exampl e
The reisaris kof fireand injury.
Alw ays hold thecig aret teligh terby the
kn ob. Always mak esur eth at thecig aret te
ligh teris out ofreac hof childr en.Nev er
leav ech ildr enuns uper vised intheveh icle. Your
attention mus talways befoc used onthe
tr aff icco nd ition s.On lyuse thecig aret te
ligh terwhen roadandtraff icco nd ition sper -
mit .
X Turn theSm artKey topos ition 0048intheign i-
ti on lock(Y page 126).
X To open :open stowage compar tment0043
und erthearm rest(Y page 252).
X Pre ssincig aret teligh ter0044.
Cigar ette ligh ter0044 will pop outauto mati-
call ywhen theheat ingelem entis red -hot . 12
Vsocke ts
Gener alnot es X
Turn theSm artKey topos ition 0047intheign i-
ti on lock(Y page 126).
The sockets can beused foracc essories wit h
a max imum drawof18 0W (15 A).Ac cesso ries
inc lude suchitems ascharge rsfor mob ile
phon es.
If you usethesoc kets for longper iods when
th een gin eis swit ched off,th ebat tery may dis-
ch arge .
i An
eme rgencycut -out ensur esthat theon -
boar dvol tag edoes notdro pto olow. Ifth e
on -board voltag eis toolow, thepowe rto
th esoc kets isauto maticallycut .This
en sur esthat there issuf ficien tpowe rto
st art theen gin e. Feat
ures
257Stowage andfeatures Z

garage
dooropener, contactanauthorized
Mercedes-B enzCenter.
Altern atively, youcan callthefollowing tele-
phone assistance services:
R USA: Mercedes-B enzCustomer Assistance
Center at1-80 0-FOR-MERCedes
R Canada: Customer Serviceat
1-80 0-38 7-0100
R HomeLink ®
hotline 1-800-355-3515(free of
charge)
More informat iononHomeLink ®
and/or com-
patible products isalso availa bleonline at
htt p:// www.homelink.c om.
Notes onthe declaration ofconf ormity
(Y page 28).
USA: FCCID:CB2HMIH L4
Canada: IC:279B -HMIH L4
Import antsafety notes G
WARNING
When youoperate orprogram thedoor with
the integrat edgarage dooropener, persons
in the range ofmovement ofthe door may
become trappedorbe struck bythe door.
There isarisk ofinjury.
When usingtheintegrat edgarage door
opener, alwaysmake surethatnobody is
within therange ofmovement ofthe door. G
DANGER
Combustion enginesemitpoisonous
exhaust gasessuchascarbon monoxide.
Inhaling theseexhaust gasesishazardous to
health andcanresult inpoisoning. Thereisa
risk offatal injury. Therefore, neverleavethe
engine runningan enclosed spacewithout
adequa tevent ilation.
Program ming Program
mingthebutt ons
Pay atten tiontothe "Important safetynotes"
(Y page 263). Garage
doorremote control0083 isnot included
with theintegrat edgarage dooropener.
X Turn theSmart Keytoposition 0048inthe igni-
tion lock (Ypage 126).
X Select oneofbutton s0044 to0085 touse to
cont rolthe garage doordrive.
X To star tprogr ammingmode: pressand
hold oneofbutton s0044 to0085 onthe integra-
ted garage dooropener.
The garage dooropener isnow inprogram-
ming mode. Afterashort time,indicator
lamp 0043lights upyellow .
Indicator lamp0043lights upyellow assoon
as button 0044,0087or0085 isstored forthe first
time. Ifthe selected buttonhasalready
been programed, indicatorlamp0043will only
light upyellow aftertenseconds have
elapsed.
X Release button0044,0087or0085. Indicator
lamp 0043flashes yellow.
X To progr amthe remote control: point
garage doorremote control0083 towards but-
tons 0044to0085 onthe rear-view mirrorata
distance of2to 8in (5 to 20 cm).
X Press andhold button 0084onremote control
0083 until indicator lamp0043lights upgreen.
When indicator lamp0043lights upgreen:
programming isfinished.
When indicator lamp0043flashes green:pro-
gramming wassuccessful. Thenext step is
to synchron izethe rolling code
(Y page 264).
X Release button0084onremote control0083 for
the garage doordrive system.
If indicator lamp0043lights upred: repeat the
programing procedureforthe correspon ding
button onthe rear-view mirror.Whendoing
so, vary thedistance between remotecon-
trol 0083and therear-view mirror. Featur
es
263Stowage andfeatu res Z

The
required distance between remotecon-
trol 0083and theintegr atedgarage door
opener depends onthe garage doordrive
system. Severalattemptsmight beneces-
sary. Youshould testevery position forat
least 25seconds beforetryinganother posi-
tion.
Synchronizing therolling code
Pay atten tiontothe "Importan tsafety notes"
(Y page 263).
If the garage doorsystem usesarolling code,
you willalso have tosynchron izethe garage
door system withtheintegr atedgarage door
opener inthe rear-view mirror.Todo this you
will need touse theprogramming buttonon
the door drive controlpanel. Theprogramming
button maybelocated indifferent places
depending onthe manufact urer.Itis usuall y
located onthe door drive unitonthe garage
ceiling.
Familiarize yourselfwiththegarage doordrive
operating instructions ,e.g. under "Program-
ming additional remotecontrols", before carry-
ing out thefollowing steps.
Your vehicle mustbewithin reachofthe
garage doororgate opener drive.Makesure
that neither yourvehicle norany persons/
object sare present withinthesweep ofthe
door orgate.
X Turn theSmart Keytoposition 0048inthe igni-
tion lock (Ypage 126).
X Get outofthe vehicle.
X Press theprogramming buttononthe door
drive unit.
Usually ,you now have 30seconds toinitiate
the next step.
X Get into thevehicle.
X Press previously programed button0044,0087
or 0085 onthe integr atedgarage dooropener
repeatedly untilthedoor closes.
The rolling codesynchron izationisthen
complete.
Notes onprogr ammingthe remot econ-
tr ol
Canadian radiofrequency lawsrequire a
"break" (orinter ruption) ofthe trans mission
signals afterbroadcasting forafew seconds.
Therefore, thesesignals maynotlast long
enough forthe integr atedgarage dooropener.
The signal isnot recogn izedduring program-
ming. Comparable withCanadian law,some U.S.
garage dooropeners alsofeature a
"break".
Proceed asfollows:
R ifyou liveinCanada.
R ifyou have difficulties programming the
garage dooropener (regardless ofwhere
you live) when following theprogramming
steps.
X Press andhold oneofbutton s0044 to0085 on
the integr atedgarage dooropener.
Aft erashort time,indicator lamp0043lights
up yellow.
X Release thebutton .
Indicat orlamp 0043flashes yellow.
X Press button 0084ofgarage doorremote con-
trol 0083for two seconds, thenrelease itfor
two seconds.
X Press button 0084again fortwo seconds.
X Repeat thissequence onbutton 0084of
remote control0083 until indicator lamp0043
lights upgreen.
When indicator lamp0043lights upgreen:
programming isfinished.
When indicator lamp0043flashes green:pro-
gramming wassuccessful. Thenext step is
to synchron izethe rolling code.
X Release button0084ofremote control0083 of
the garage doordrive.
When indicator lamp0043lights upred:
repeat theprogramming processforthe cor-
responding buttononthe rear-view mirror.
When doingso,vary thedistance between
remote control0083 and therear-view mirror.
The required distance between remotecon-
trol 0083and theintegr atedgarage door
opener depends onthe garage doordrive
system. Severalattemptsmight beneces-
sary. Youshould testevery position forat
least 25seconds beforetryinganother posi-
tion.
Problems whenprogramming
If you areexperienc ingproblems programming
the integr atedgarage dooropener onthe rear-
view mirror, takenoteof the following instruc-
tions:
R Check thetrans mitterfrequency usedby
garage doordrive remote control0083 and
whether itis supported. Thetrans mitterfre-
quency canusuall ybe found onthe back of
remote control0083 for the garage doordrive. 264
Featur
esStowage andfeatu res

The
integr atedgarage dooropener iscom-
patible withdevices thathave units which
operate inthe frequency rangeof280 to
433 MHz.
R Replace thebatteries ingarage doorremote
cont rol0083. This increases thelikelihood that
garage doorremote control0083 will trans mit
a stron gand precise signaltothe integr ated
garage dooropener.
R When programming, holdremote control0083
at varying distances andangles frombut-
ton s0044 to0085 which youareprogramming.
Try various anglesatadistance between
2and 8inches (5to20cm) oratthe same
angle butatvarying distances .
R Ifafurther remote control0083 isavailabl efor
the same garage doordrive, repeat the
same programming stepswiththisremote
cont rol0083. Before performin gthese steps,
make surethatnew batteries havebeen
installed ingarage doordrive remote control
0083.
R Note thatsome remote controlsonly trans -
mit foralimited amount oftime (theindica-
tor lamp onthe remote controlgoes out).
Press button 0084onremote control0083 again
before transmission ends.
R Align theanten nacable ofthe garage door
opener unit.Thiscanimprove signalrecep-
tion/ transmission.
Opening/clo singthegara gedoor Aft
erithas been programmed, theintegr ated
garage dooropener performs thefunct ionof
the garage doorsystem remote control.Please
also read theoperating instructions forthe
garage doorsystem.
X Turn theSmart Keytoposition 0048inthe igni-
tion lock (Ypage 126).
X Press either button 0044,0087or0085 which you
have programmed tooperate thegarage
door.
Garage doorsystem withafixed code: indi-
cator lamp0043lights upgreen.
Garage doorsystem witharolling code:indi-
cator lamp0043flashes green.
The trans mitterwill trans mitasignal aslong
as the button ispressed. Thetrans mission
is halted afteramaximum often seconds
and indicator lamp0043lights upyellow.
X Press button 0044,0087or0085 again ifneces-
sary. Clearing
thememor y Make
surethatyouclear thememory ofthe
integr atedgarage dooropener beforeselling
the vehicle.
X Turn theSmart Keytoposition 0048inthe igni-
tion lock (Ypage 126).
X Press andhold button s0044 and 0085.
The indicator lampinitially lightsupyellow
and then green.
X Release buttons0044 and 0085.
The memory ofthe integr atedgarage door
opener inthe rear-view mirroriscleared. Compass
Calling upthe compass Compass
0044display sthe compass directionin
which thevehicle iscurrent lytraveling: N N,
NE NE,
E E,
SE SE,
S S,
SW SW,
W W
or NW NW.
To receive acorrec tdisplay inrear-view mir-
ror 0043, thecompass mustbecalibrated and
the magnetic fieldzone set. Featur
es
265Stowage andfeatu res Z

Setting
thecompass North
America zonemap South
America zonemap
X Set your location usingthezone maps.
X Push around peninto opening 0087
(Y page 265)forapproximately threesec-
onds.
The zone current lyselected appearsincom-
pass display 0044(Ypage 265).
X To selec tthe zone: pusharound peninto
opening 0087(Ypage 265)untilthedesired
zone isselected.
If, after afew seconds, thedisplay incom-
pass display 0044(Ypage 265)changes direc-
tion, thezone hasbeen selected. Calibrating
thecompass X
Make surethatthere issufficient spacefor
you todrive inacircle without impeding
traffic.
In order tocalibrate thecompass correctly,do
the following:
R calibrate thecompass inthe open andnotin
the vicinity ofsteel struct uresorhigh-volt-
age transm issionlines.
R switch offelectrical consumers suchasthe
climate control,windshield wipersorrear
window defroster.
R close alldoors andthetrunk lid.
X Switch onthe ignition.
X Push around peninto opening 0087
(Y page 265)forapproximately sixseconds,
until symbol C C
is shown incompass dis-
play 0044(Ypage 265).
X Drive yourvehicle inafull circle atapprox-
imately 3mph (5km/h) to6mph
(10 km/h).
When thecalibration hassuccessfully been
completed, thecurrent direction isshown in
compass display0044(Ypage 265). Floo
rmats G
WARNING
Object sin the driver's footwell mayrestrict
the clearance aroundthepedals orblock a
depressed pedal.Thisjeopardizes theoper-
ating androad safety ofthe vehicle. Thereis
a risk ofan accident.
Stow allobject ssecurely inthe vehicle so
that they donot getinto thedriver's foot-
well. When usingfloormats orcarpets, make
sure thatthey areproperly securedsothat
they donot slip orobstruct thepedals. Do
not place several floormats orcarpets on
top ofone another. 266
FeaturesStowage
andfeatu res

Engine
compartm ent Hood
Imp ortant safety notes G
WAR
NING
If th ehood isunlat ched, itmay open up
when theveh icle isin mot ionand blockyour
view. Thereis arisk ofan acc iden t.
Nev erunlat chthehood while driving.Bef ore
ever ytrip, ens ure that thehood isloc ked. G
WAR
NING
When openingand closingth ehood ,it may
sudde nlyfall intoth eclo sed posit ion.Ther e
is arisk ofinjury topers onswith inran geof
mov emen tof thehood .
Open andclosethehood onlywhen noone
is with inits ran geofmov emen t. G
WAR
NING
Open ingthehood when theeng ineisove r-
heat edorwhen there isafir ein theeng ine
com partmen tcoul dexp ose you tohot gases
or other servicepro duct s.Ther eis arisk of
inj ury.
Let anove rheatedeng inecoo ldown before
open ingthehood .If th ere isafir ein the
eng inecom partmen t,ke ep thehood closed
and contactth efir edepar tment . G
WAR
NING
The enginecom partmen tcon tain smov ing
com ponents.Cert aincom ponents,suc has
th eradiat orfan ,may continue torun orstart
again sudde nlywhen theign ition isoff .
Ther eis arisk ofinjury.
If you needto do any work inside theeng ine
com partmen t:
R swit choff theign ition
R nev erreac hint oth earea whereth ere isa
risk ofdang erfrom mov ingcom ponents,
suc has thefan rotatio narea R
rem ove jewelry andwatc hes
R ke ep items ofclo thing and hair, forexam -
ple, away from mov ingpart s
To ens ure theflow offresh airthroug hth eair
ven tsint oth eveh icle interio r,please observe
th efoll owin gno tes: (Y page 122)
Open ingthehood G
WAR
NING
Cert aincom ponentsin theeng inecom part-
men t,suc has theeng ine,radiat orand parts
of theexh aust system, canbecome very
hot .Wor kingin theeng inecom partmen t
pose sa risk ofinjury.
Wher eposs ible, lettheeng inecoo ldown
and touch onlythecom ponentsdesc ribedin
th efoll owin g. G
WAR
NING
When thehood isopen andthewind shield
wiper sare setinmot ion,you can beinjured
by thewiper linkage. Thereis arisk ofinjury.
Always switchoff thewind shieldwiper sand
th eign ition befo reopen ingthehood .
! Mak
esure that thewind shieldwiper sare
no tfold edaway from thewind shield.You
coul dot her wise damag eth ewind shieldwip-
ers orthehood . X
Mak esure that thewind shieldwiper sare
tur ned off.
X Pull release lever0043 onthehood .
The hood isrele ased. 268
Engine
compartm entMa intenance andcare

G
WARNING
If engine oilcomes intocontact withhot
components inthe engine compartment, it
may ignite. Thereisarisk offire and injury .
Make surethatengine oilisnot spilled next
to the filler neck. Letthe engine cooldown
and thoroug hlyclea nthe engine oiloff the
components beforestarting theengine. H
Envi
ronmental note
When addingoil,take carenottospil lany. If
oil enters thesoil orwate rways,itis harmfu l
to the environment.
! Use
only engine oilsand oilfilters thatare
app roved forvehicl eswith aservice system.
A list ofthe engine oilsand oilfilters that
have been tested andapproved inaccord-
ance withMercede s-BenzSpecifications for
Service Productsisava ilable atany author-
ized Mercede s-BenzCenter.
The followi ngcaus eengine failure ordam-
age tothe exhau stsystem:
R Use ofengine oilsand oilfilters thathave
not been express lyapp roved forthe ser-
vice system
R Rep lace ment ofengine oiland oilfilter
after thereplacement intervalspecified
by the service system hasexpire d
R Use ofengine oiladd itives
! Do
not add toomuch oil.If the oilleve lis
abo vethe "ma x"mark onthe dipstick, too
much oilhas been added. This canleadto
dama getothe engine orthe catal yticcon-
verter. Haveexcess oilsiph oned off. Example
:engine oilcap X
Turn cap0043counter-clockwi seand remove
it.
X Add engine oil.
If the oilleve lis at or bel ow the MIN mark
on the oildip stick, add1.1USqt(1.0 liter)
of engine oil.
X Rep lace cap0043onthe filler neck andturn
clockwis e.
Ensure thatthecap locks intoplace
secure ly.
X Che ckthe oilleve laga inwith theoildip stick
(Y pag e269) .
Further informati ononengine oil
(Y pag e327) . Che
ckin gand adding otherservice
products
Che ckin gco olan tlev el G
WARNING
Certa incomponents inthe engine compart-
ment, suchasthe engine, radiator andparts
of the exhau stsystem, canbecome very
hot. Working inthe engine compartment
poses arisk ofinjury .
Where possible,let the engine cooldown
and touch onlythecomponents describedin
the followi ng. G
WARNING
Opening thehood when theengine isover-
hea ted orwhen thereisafire inthe engine
compartment couldexpose youtohot gase s
or other service products.There isarisk of
injury .
Let anoverhe atedengine cooldownbefore
openi ngthe hood. Ifthere isafire inthe
engine compartment, keepthehood closed
and contact thefire depa rtment. G
WARNING
The engine compartment containsmoving
components. Certaincomponents, suchas
the radiator fan,may continue torun orstart
aga insud denly whentheignitio nis off.
There isarisk ofinjury . 270
Eng
inecompar tmentMainten anceandcare

If
you need todo any work inside theengine
compartment:
R switch offthe ignition
R never reach intothearea where thereisa
risk ofdanger frommoving components,
such asthe fanrotation area
R remove jewelryandwatches
R keep items ofclothing andhair, forexam-
ple, awayfrom moving parts G
WARNING
The cooling systemispressu rized,particu-
larl ywhen themotor iswarm. Ifyou open
the cap, youcould bescalde difhot coolant
spray sout. There isarisk ofinjury.
Let the engine cooldown before youopen
the cap. Wear protective glovesandprotec-
tive eyew earwhen opening. Openthecap
slow lyto relea sepressu re. Example
X Park thevehicle onalevel surface.
Only check thecoolant levelwhen thevehi-
cle ison alevel surface andtheengine has
cooled down.
X Turn theSmartKey topositio n0048 inthe igni-
tion lock (Ypage 126).
On vehicle swith KEYLESS- GO,press the
Start/St opbutton twice(Ypage 126).
X Check thecoolant temperature gageinthe
multifu nctiondisplay.
The coolant temperature mustbebelow
158 ‡(70 †).
X Turn theSmartKey topositio n0092
(Y page 126)inthe ignition lock. X
Slowl yturn cap0044half aturn counter-clock-
wise toallow excess pressureto escape .
X Turn cap0044further <004600520058005100570048005500100046004F00520046004E005A004C0056
0048[ and
remove it.
If the coolant isat the level ofmarker bar
0087 inthe fillerneck when cold,there is
enough coolant incoolant expansion
tank 0043.
If the coolant levelisappro ximately 0.6in
(1.5 cm)above marker bar0087inthe filler
neck when warm, thereisenough coolant in
expansion tank0043.
X Ifnecessary ,add coolant thathasbeen tes-
ted and appro vedbyMercedes-Benz.
X Repl acecap 0044and turn itclockwise asfar
as itwil lgo.
Further information oncoolant (Ypage 328).
Windshie ldwashe rsystem G
WARNING
Certai ncomponents inthe engine compart-
ment, suchasthe engine, radiator andparts
of the exhau stsystem, canbecome very
hot. Working inthe engine compartment
poses arisk ofinjury.
Where possible,let the engine cooldown
and touch onlythecomponents describedin
the follow ing. G
WARNING
If you open thehood when thedrive system
has overhea tedorduri ngafire inthe engine
compartment, youcould come intocontact
with hotgases orother escapi ngopera ting
flui ds. There isarisk ofburns.
Let the overhea tedcomponents cooldown
before opening thehood. Inthe event ofa
fire inthe engine compartment, keepthe
hood closed andcallthefire service. G
WARNING
Windshi eldwash erconcentrate ishighl y
flamma ble.Ifwindshi eldwash erconcentrate
gets onto hotcomponents ofthe engine or
the exhau stsystem, itcan ignite. Thereisa
risk offire and injury. Eng
inecompar tment
271Maintenanc eand care
Z

Where
willIfind...? Warning
triangle
Removi ngthe warni ngtriangle Warni
ngtriangl e0043 isloca tedinabracket on
the insid eof the trunk lid.
X Open thetrunk lid.
X Press catches 0044inthe direction ofthe
bracket andopen thebracket inthe direc-
tion ofthe arrow .
X Pul lthe retai ning clipofwa rning triangl e0043
in the center ofthe bracket, outward.
X Remo vewarning triangl e0043 from the
bracket.
Setting upthe warni ngtriangle X
Fold feet0087dow nand outtothe side .
X Pul lside reflectors 0044upw ards toform atri-
angl eand lock them atthe top using upp er
press -stud 0043. Fi
rst-aid kit First-ai
dkit 0043 isloca tedinthe stowa gewel l
under thetrunk floor.
X Lift the trunk floorupwards (Ypag e255) .
X Remo vefirst-ai dkit 0043.
Che ckthe expira tiondate onthe first-ai dkit at
lea stonce ayea r.Rep lace thecontents ifnec-
essa ry,and replace missi ngitems. Refle
ctive safety jacket
Removi ng/replac ingrefle ctive safety
jackets The
refle ctive safetyjackets areloca tedinthe
safe tyjacket compartments inthe stowa ge
compa rtments ofthe front doors .There are
als osafe tyjacket compartments inthe stow-
age compa rtments ofthe rear doors ,in whi ch
refle ctive safetyjackets canbestowed .
X To remove :pul lout safe tyjacket bag0043
with therefle ctive safetyjacket bythe loop .
X Open safetyjacket bag0043and pullout the
refle ctive safetyjacket. Where
willIfind...?
279Breakdown assistance

X
To sto w:foldthe reflecti vesafety jacke t,
rol lit up and stow itin safety jacke tba g0043 .
X Sli de safety jacke tba g0043 along thelowe r
ed ge ofthe arm restinto thesafety jacke t
comp artment.Meanwhile, ensu retha tthe
lo op hangs outwe llwi thi nrea ch.
i Re
move anew reflecti vesafety jacke t
from itspackag ingmateri albe fore slid ing it
into thesafety jacke tcomp artment.The
pa ckag ingmateri alma yothe rwisecau seit
to slip ou tor ma kerem oving itdiffi cul t.
Obs ervethe lega lreq uirem ents ineach cou n-
try .
Note son the reflective safetyjack et 0043
Maximu mnum berof wa she s
0044 Maximu mwa sh temp erature
0087 Donot blea ch
0085 Donot iron
0083 Donot usealaund rydry er
0084 Donot dry-cle an
006B Thisis acla ss2ves t
R The reflecti vesafety jacke tsmee tthe
req uirem ents define dby the lega lsta nda rd
onl yif:
- the corr ectsize isus ed and
- the reflecti vesafety jacke tis corr ectly
fas tened
R Befo reuse, ensu retha tthe reflecti vesafety
jacke tis cle an and intact.The specialpro p-
erti esma yothe rwisebe comp romised.
R The reflecti vesafety jacke tssho uld be
stor edinthei rori ginal packag inginadry
pl ace away from sources ofhea tand light.
R The maximu mnum berof wa she sspe cified
is not theonlyfac tor influencing thelife
spa nof the reflecti vesafety jacke ts.The ir
li fe spa nalso depends onuse, car e,stor age,
etc. R
The reflecti vesafety jacke tssho uld be dis-
po sed ofand replaced with new ones :
- afte r15 washe s,and /or
- ifthe reflecti vestri pshave become
scra tched ,and /or
- ifthe backing materi aland /or reflecti ve
stri pshave become soiled and canno tbe
cle ane doff, and/or
- the reflecti vesafety jacke t'sfluore scenc e
ha sfad ed,e.g .du eto the effectsofsun-
li ght
R Disp oseofthe reflecti vesafety jacke tin an
envi ronme ntallyres ponsi ble ma nner. Todo
so, conta ctyour local waste dispo salcom-
pa ny. Vehi
cle too lkit
Gen eral notes The
towingeyeis locate din the trunk ina
bra cket below the trunk lid lock.
If yo ur veh icleis eq uipp ed with aTIR EFIT kit,it
is locate din the stow agespa ceund erthe
trunk floor.
Vehi cles with aTIRE FITkit The
TIREFIT kitislocate din the stow agewe ll
und erthe trunk floor (Y page 255 ). 0043
Tow ingeye
0044 Tire sea lant fillerbo ttle
0087 Fuseallo cati oncha rt
0085 Tire infl ation comp ressor
0083 Stow agetray openi ng
X To rem ove towingeye0043 raise the openi ng
on stow agetray 0083.
X Use theTIREFIT kit(Ypage 282 ). 28
0 Whe
rewillIfin d...?Breakdo wnassis tan ce