lights MERCEDES-BENZ SL CLASS 2020 Owner's Manual

When
theengine isrunn ing,thevehicle issta-
tionary andinbright ambient light:ifyou turn
the light switch tothe 0060 position, theday-
time runninglamps andparking lampsswitch
on.
If the engine isrunn ingand youturn thelight
switch to0058, themanual settings take prec-
edence overthedaytime runninglamps.
USA only:
The daytime runninglamps improve thevisibil-
ity ofyour vehicle duringtheday. Todo this,
the daytime runninglamps functionmust be
switched onusing theon-board computer
(Y page 202).
If the engine isrunn ingand youturn thelight
switch to0060 or0058, themanual settings
take preceden ceover thedaytime running
lamps.
Low-beam headlamps G
WARNIN
G
When thelight switch isset to0058, the
low-beam headlamps maynotbeswitched
on automatically ifthere isfog, snow or
other causes ofpoor visibility duetothe
weather conditionssuch asspray. Thereisa
risk ofan accident .
In such situation s,turn thelight switch to
0058.
Even ifthe light sensor doesnotdetect thatit
is dark, theparking lampsandlow-beam head-
lamps switch onwhen theignition isswitched
on and thelight switch isset tothe 0058 posi-
tion. Thisisaparticularly usefulfunctioninthe
event ofrain andfog.
X To
switch onthe low-beam headlamps:
turn theSmart Keytoposition 0048inthe igni-
tion lock orstart theengine.
X Turn thelight switch to0058.
The green 0058indicator lampinthe instru-
ment cluster lightsup.
Park inglamp s
! If
the batter ycharge isvery low,thepark-
ing lamps orstandin glamps areautomati-
cally switched offtoenable thenext engine
start .Always parkyourvehicle safelyandin
a well litarea, inaccordan cewith therele-
vant legal stipulations. Avoidusingthe0060
parking lampsoveraperiod ofseveral hours.
Ifpossible, switchonthe right- hand
0064 orleft- hand 0063 standin glamps.
X To switch on:turn thelight switch to0060.
The green 0060indicator lampinthe instru-
ment cluster lightsup.
Stand inglamp s
Switc hingonthe standin glamps ensures the
corr esponding sideofthe vehicle isillumina-
ted.
X To switch onthe stand inglamp s:the
Smart Keyisnot inthe ignition lockoritis in
position 0092inthe ignition lock.
X Turn thelight switch to0063 (left-hand side
of the vehicle) or0064 (right- handsideof
the vehicle). Combination
switch 0043
High-beam headlamps
0044 Turn signal, right
0087 High-beam flasher
0085 Turn signal, left
X To indicate briefly:pressthecombin ation
switch brieflytothe pressure pointinthe
direct ionofarrow 0044or0085.
The corresponding turnsignal flashes three
times.
X To indicate: pressthecombin ationswitch
beyond thepressure pointinthe direct ionof
arrow 0044or0085.
X To
switch onthe high-beam headlamps:
turn thelight switch to0058 or0058.
X Press thecombin ationswitch beyond the
pressure pointinthe direct ionofarrow 0043.
In the 0058 position, thehigh-beam head-
lamps areonly switched onwhen itis dark
and theengine isrunn ing. 110
Exterior
lightingLightsandwindshield wipers

The
blue 0057 indicator lampinthe instr u-
ment cluster lightsupwhen thehigh-beam
headlamps areswitched on.
X To
switch offthe high-beam headlamps:
move thecombinat ionswitch backtoits
normal position.
The blue 0057 indicator lampinthe instr u-
ment cluster goesout. Haza
rdwarning lamps X
To
switch onthe haza rdwarning lamps:
press button 0043.
All turn signals flash.Ifyou now switch ona
turn signal usingthecombinat ionswitch,
only theturn signal lamponthe correspon d-
ing side ofthe vehicle willflash.
X To
switch offthe haza rdwarning lamps:
press button 0043.
The hazard warning lampsautomatically
switch onif:
R an air bag isdeployed or
R the vehicle decelerates rapidlyfromaspeed
of above 45mph (70km/ h)and comes toa
standst ill
The hazard warning lampsswitch offautomati-
cally ifthe vehicle reaches aspeed ofabove
6 mph (10km/ h)again afterafull brake appli-
cation.
i The
hazard warning lampsstilloperate if
the ignition isswitched off. Cornering
lightfunction
The corn ering lightfunct ionimproves theillu-
mination ofthe road overawide angle inthe
direction youareturnin g,enabling bettervisi-
bility intight bends, forexample. Thecorn er- ing
light funct ioncan only beactivated when
the low-beam headlamps areswitched on.
Active:
R ifyou aredriving atspeeds below25mph
(40 km/ h)and switch onthe turn signal or
turn thesteerin gwheel
R ifyou aredriving atspeeds between 25mph
(40 km/ h)and 45mph (70km/ h)and turn
the steerin gwheel
The corn ering lampmayremain litfor ashort
time, butisautomatically switchedoffafter no
more thanthree minutes.
Cornering lightfunction withtraffic circle
function:
The corn ering lightfunct ionisactivated on
both sides before enteringatraff iccircle
through anevaluation ofthe current GPSposi-
tion ofthe vehicle. Itremains activeuntilafter
the vehicle hasleftthetraff iccircle. Inthis
way, pedestrians crossingthe road, forexam-
ple, areilluminated byyour vehicle ingood
time. Active
lightfunction
The active lightfunct ionisasystem that
moves theheadlamps accordingtothe steer-
ing movemen tsof the front wheels. Inthis
way, relevant areasremain illuminated while
driving. Thisallows youtorecogn izepedes-
trians, cyclists andanimals sooner.
Active: whenthelights areswitched on.
Vehicles withLane Keeping Assist:the active
light funct ionevaluates thecourse ofthe lane
in which youaredriving andpre-empt ively
cont rolstheactive lightfunct ion. Adapt
iveHighbeam Assist
General notes You
canusethis funct iontoset the headlamps
to change between lowbeam andhigh beam
automatically. Thesystem recognizesvehicles
with their lights on,either approaching from
the opposite direction ortraveling infront of
your vehicle, andconsequent lyswitches the
headlamps fromhighbeam tolow beam.
The system automatically adaptsthelow-beam
headlamp rangedepending onthe distance to
the other vehicle. Oncethesystem nolonger Exterior
lighting
111Lightsandwindshield wipers Z

detec
tsany other vehicles, itreact ivates the
high-beam headlamps.
The system' soptic alsensor islocated behind
the windshield neartheoverhead control
panel.
Impor tantsafet ynotes G
WARN
ING
Adaptiv eHighbeam Assistdoesnotrecog-
niz eroad users:
R who have nolights, e.g.pedestr ians
R who have poorlightin g,e.g. cyclist s
R whose lightingis block ed,e.g. byabarrier
On very rareoccasions, AdaptiveHighbeam
Assist mayfailtorecogn izeother roadusers
that have lights, ormay recogn izethem too
late. Inthis, orinsimilar situation s,the auto-
matic high-beam headlamps willnotbe
deactiv atedorwill beactiv ated regardless.
There isarisk ofan acciden t.
Always carefully observethetrafficcon di-
tion sand switch offthe high-beam head-
lamps ingood time.
Adaptiv eHighbeam Assistcannottake into
accoun troad, weather ortraf ficcon dition s.
Adaptiv eHighbeam Assistisonly anaid. You
are respon sibleforadjustin gthe vehicle's
lightin gto the prevailing light,visibility and
traf ficcon dition s.
In partic ular,thedetec tionofobstac lescan be
rest rictedifther eis:
R poor visibility, e.g.due tofog, heavy rainor
snow
R dirt onthe sensor sor the sensor sare
obscured
Switching AdaptiveHighbeam Assist
on/off X
To switch on:turn thelight switch to0058.
X Press thecombin ationswitch beyond the
pressure pointinthe direct ionofarrow 0043.
The 00CE indicat orlamp inthe multifun ction
display lightsupwhen itis dark andthelight
sensor activates thelow-beam headlamps.
If you aredriving atspeeds aboveapprox-
imately 16mph (25km/ h): The
headlamp rangeisset automatic ally
dependin gon the distanc ebetween the
vehicle andother roadusers.
If you aredriving atspeeds aboveapprox-
imately 19mph (30km/ h)and noother
road users havebeen detec ted:
The high-beam headlamps areswitch edon
automatic ally.The0057 indicat orlamp in
the instrument clusteralsolights up.
If you aredriving atspeeds belowapprox-
imately 16mph (25km/ h)or other road
users havebeen detec tedorthe roads are
adequately lit:
The high-beam headlamps areswitch edoff
automatic ally.The0057 indicat orlamp in
the instrument clustergoesout.The00CE
indicat orlamp inthe multifun ction display
remains lit.
X To switch off:move thecombin ation
switch backtoits norm alposition ormove
the light switch toanot herposition .
The 00CE indicat orlamp inthe multifun ction
display goesout. Interior
lighting Overview
ofinterior lighting Overhead
control panel
0043 003D Switchestheleft- hand reading lamp
on/ off
0044 004A Switchestheinterior lightin gon
0087 0033 Switchestheinterior lightin g/auto-
matic interior lightin gcon trol off
0085 003D Switchestheright -handreading lamp
on/ off
0083 Switc hestheautomatic interior lightin g
con trol on 112
Interior
lightingLightsandwindshield wipers

Repl
acing the wiper blades
Impo rtant safetynotes G
WARNI
NG
If the windsh ield wiper sbeg into move while
yo uare changing thewiper blad es, you
cou ldbe trap ped bythe wiper arm.The reis
a ris kof inju ry.
Alw aysswi tch offthe windsh ield wiper sand
ig niti onbef ore changing thewiper blad es.
! To
avo idda mag ingthe wiper blad es, make
su re that youtou chonly thewiper arm of
the wiper .
! Neve
rope nthe hoodifawi ndsh ield wiper
arm hasbee nfol ded away from thewind-
shi eld.
Neve rfol dawi ndsh ield wiper arm withou ta
wi per blad eba ck onto thewindsh ield .
Hol dthe windsh ield wiper arm firmlywh en
yo ucha nge thewiper blad e. Ifyo urel ease
the windsh ield wiper arm withou ta wi per
bl ad eand itfal lsonto thewindsh ield ,the
wi ndsh ield may bedamag edbythe force of
the impact.
Mer cedes-Be nzreco mmend sthat youha ve
the wiper blad es cha nged ataqu alifi ed spe -
cia list wo rksho p.
! Alw
ayspos ition the windsh ield wiper arms
verti callybef ore folding them away from the
wi ndsh ield .By doing so, youwi llavo idda m-
ag eto the hood.
Cha ngingthe windsh ield wiper blades Mov
ingthe wiper arm toave rtic alpos i-
tio n
On vehic leswi thout KEYLES S-GO :
X Tu rn the Smar tKeytopos ition 0047 or0048 in
the igniti onlock.
X Set thewindsh ield wiper topos ition 00AA.
X Whe nthe wiper armsare verti caltothe
hoo d,turn theSmar tKeytopos ition 0092 in
the igniti onlock and remo veit.
X Fol dthe wiper arm away from thewind-
shi eld unti lyo ufee lit enga ge. On
vehic leswi th KEYLES S-GO :
X Swi tch offthe engi ne.
X Re move your foo tfrom thebrakeped al.
X Set thewindsh ield wiper tothe 00AA posi-
tion.
X Pre ssthe Start/Sto pbu tton repeatedl yunti l
the windsh ield wiper starts.
X Whe nthe wiper armsare inaverti calpos i-
tion tothe hood,pre ssthe Start/Sto pbu t-
ton.
X Fol dthe wiper arm away from thewind-
shi eld unti lyo ufee lit enga ge.
Remo vingawi per blade X
To
brin gthe wiper blade into pos ition to
be remo ved: hol dthe wiper arm firmlywith
one hand. With the othe rha nd, turn the
wi per blad ein the directi onofarr ow 0087
bey ond thepointofres ista nce.
The wiper blad eenga gesinthe remo val
pos ition with an audible cli ck.
X To remo veawi per blade: firmlypre ss
rel ease knob 0044and pullthe wiper blad e
up wa rds 0043.
In stal ling the wiper blades 11
4 Win
dshi eld wi persLights andwindsh ield wipers

X
Push thenew wiper bladeinthe direction of
arrow 0043ontothe wiper armuntil lug0044
engages.
X Push thewiper bladeoutofthe removal
position inthe direction ofarrow 0087beyond
the point ofresistan ce.
The wiper bladedisengages withanaudible
click andisfreely movable again. X
Make surethatthewiper bladeisseated
correc tly.
X Fold thewiper armback ontothe wind-
shield. Problems
withthewindshield wipers Problem
Possible
<0046004400580056004800560012004600520051005600480054005800480051
004600480056> and0050 0050
Solutions The
windshield wipers
are jammed. Leaves
orsnow, forexample, maybeobstruct ingthe windshield
wiper movemen t.The wiper motor hasbeen deactivated.
X For safety reasons, youshould remove theSmart Keyfrom the
ignition lock.
or X Switc hoff the engine usingtheStart /Stopbutton andopen the
driver's door.
X Remove thecause ofthe obstruct ion.
X Switc hthe windshield wipersbackon. The
windshield wipers
fail completely. The
windshield wiperdriveismalfunct ioning.
X Select another wiperspeed onthe combinat ionswitch.
X Have thewindshield wiperscheckedataqualified specialist
workshop. Windshield
wipers
115Lightsandwindshield wipers Z

R
Use theresidua lheat function ifyou want to
heat orventilate thevehicle interior when
the ignition isswitched off.The residua l
heat function canonly beactivated ordeac-
tivated withtheignition switched off.
R Vehicles withCOMAND: ifyou change the
settings ofthe climate controlsystem, the
climate statusdisplayappea rsfor three sec-
onds atthe bottom ofthe screen inthe
COMAND display.You willsee thecurrent
settings ofthe various climate controlfunc-
tions.
ECO start /stop function During
automatic engineswitch-off, thecli-
mate controlsystem onlyoperates ata
reduced capacity. Ifyou require fullclimate
cont rolcapacity, theECO start/st opfunction
can bedeactivated bypressing theECO but-
ton (Ypage 130). Operating
theclimate controlsys-
tems Activating/
deactivating climatecon-
trol
General notes When
theclimate controlisswitched off,the
air suppl yand aircirculation arealso switched
off. The windows couldfogup.Therefore,
switch offclimate controlonly briefly
i Act
ivate climate controlprimarily usingthe
0058 button (Ypage 119). Activating/
deactivating X
Turn theSmartKey toposition 0048inthe igni-
tion lock (Ypage 126).
X To activate: pressthe0058 button.
The indicator lampinthe 0058 button lights
up. Airflow andairdistribution aresetto
automatic mode.
or
X Press the0078 button.
The indicator lampinthe 0078 button goes
out. Thepreviousl yselected settingsare
restored.
X To deactivate: pressthe0078 button.
The indicator lampinthe 0078 button lights
up. Switchin
gcoo ling with airdehumidi-
fication on/off
General notes If
you deactivate the"Cool ingwith air-dehu-
midification" function,theairinside thevehicle
will notbecooled. Theairinside thevehicle
will also notbedehumid ified.Thewindows can
fog upmore quickly. Therefore, deactivate the
cooling withair-dehumi dificationfunctiononly
briefly .
The "Cool ingwith airdehumid ification" func-
tion isonly available when theengine isrun-
ning. Theairinside thevehicle iscooled and
dehumid ifiedaccording tothe temperature
selected.
Condensation maydripfrom theunderside of
the vehicle whenitis in cooling mode.Thisis
normal andnotasign thatthere isamalfunc-
tion.
Activating/ deactivating X
To activate: pressthe005A button.
The indicator lampinthe 005A button lights
up.
X To deactivate: pressthe005A button.
The indicator lampinthe 005A or0056 but-
ton goes out.The"Cool ingwith airdehumid -
ification" functionhasadelay edswitch-off
feature.
The indicator lampinthe 005A button goes
out. The"Cool ingwith airdehumid ification"
function hasadelay edswitch-off feature. 118
Operat
ingthe climat econ trol systemsCli mat eco ntrol

Problems
withthe"Cool ingwith airdehum idification" function Problem
Possible
causes/co nsequences and0050 0050
Solutions The
indicator lampin
the 005A button flashes
three times orremains
off. The "Cooli ngwith
air <00470048004B00580050004C0047004C0049004C004600440057004C00520051
0005[
funct ioncannot be
switched on. Cooling
withairdehumidification hasbeen deactivated duetoa
malfunction .
X Visit aquali fiedspecialist workshop. Setting
climate controltoautom atic
General notes In
automatic mode,thesettemperature is
maintained automatically ataconst antlevel.
The system automatically regulatesthetem-
perature ofthe dispensed air,the airflow and
the airdistribution.
The automatic modefunctionsoptimally when
the "Cooli ngwith air<00470048004B00580050004C0047004C0049004C004600440057004C00520051
0005[ func-
tion isactivated. Ifnecessary, coolingwithair
dehumidification canbedeactivated.
If you deactivate the"Cooli ngwith air-dehu-
midification" function,theairinside thevehicle
will notbecooled. Theairinside thevehicle
will also notbedehumidified .The windows can
fog upmore quickly. Therefore, deactivate the
cooling with<0044004C0055001000470048004B00580050004C0047004C0049004C00460044
0057004C00520051[ functiononly
briefly.
Automat iccontrol X
Turn theSmartK eytoposition 0048inthe igni-
tion lock (Ypage 126).
X Set thedesired temperature.
X To activate: pressthe0058 button.
The indicator lampinthe 0058 button lights
up. Automatic airdistribution andairflow are
activated.
i When
automatic modeisenabled, thecli-
mate mode canbeselected (Ypage 119).
X To switch tomanua lmode: pressthe
008F button.
or X Press the0095 or0097 button.
The indicator lampinthe 0058 button goes
out. Adjust
ingthe climate modesettings
You canselect thefollowing climatemodeset-
tings inautomatic mode:
FOCUS highairflow, slightlycoolersetting
MEDI UMmedium airflow,standard setting
DIFF USE lowairflow, slightlywarmer and
draft-f reesettin g
X Turn theSmartK eytoposition 0048inthe igni-
tion lock (Ypage 126).
X Press the0058 button.
X Press the00F0 button repeatedly untilthe
desired climatemodeappears inthe dis-
play . Setting
thetemp eratu re
Setting thetemp eratu re Differen
ttemperatures canbeset forthe driv-
er's andfront -passenger sides.
X Turn theSmartK eytoposition 0048inthe igni-
tion lock (Ypage 126).
X Turn control0043 or0044 counter -clockwiseor
clockwise.
Only change thetemperature settingin
small incremen ts.Start at72 ‡(22 †).
i If
you turn controls0043and 0044counter -
clockwise tothe lowest temperature setting,
<0044004C00550010005500480046004C005500460058004F00440057004C0052
0051[ modemayswitch onauto-
matically, depending onthe outside temper-
ature. Operat
ingthe climate controlsystems
119Climat econ trol

Setting
theairdistr ibution
<002400460057004C005900440057004C0051004A001200470048004400460057
004C005900440057004C0051004A> X
Turn theSmartK eytoposition 0048inthe igni-
tion lock (Ypage 126).
X Press the008F button repeatedly untilthe
desired symbolappears inthe display .
Air distr ibution settings The
following airdistribution settingscan be
selected:
009C Directsair through thecent erand side
air vent s
009B Directsair through thefootwell air
vent s
009F Directsair through thecent er,side and
footwell vents
0061 Directsair through thedefroster vents
0087 Directsthe airflow through the
defroster, centerand side airvent s
(Canada only)
0086 Directsair through thedefroster and
footwell vents
008F Directsthe airflow through the
defroster vents,the cent erand side air
vent sas well asthe footwell airvent s
(Canada only)
i Regardle
ssofthe airdistribution setting,
airflow isalwa ysdirected throughtheside
air vent s.The side airvent scan only be
closed whentheadjuster inthe side airvent
is turned clockwise. Setting
theairflow
Setting theairflow X
Turn theSmartK eytoposition 0048inthe igni-
tion lock (Ypage 126).
X To increase: pressthe0097 button.
X To reduce: pressthe0095 button. Switching
theZONE function on/off
X To switch on:press the00D6 button.
The indicator lampinthe 00D6 button lights
up. The temperature settingfor the driver's side
isnot adopted forthe front -passenger
side.
X To switch off:press the00D6 button.
The indicator lampinthe 00D6 button goes
out. Thetemperature settingfor the driver's
side isadopted forthe front -passenger side. Defrosting
thewindshield
General notes You
canusethis funct iontodefrost thewind-
shield ortodefrost theinside ofthe wind-
shield andtheside windows.
Switch offthe "Windshield defrosting"function
as soon asthe windshield isclear again.
Switching the"windshield defrosting"
function onoroff X
Turn theSmartK eytoposition 0048inthe igni-
tion lock (Ypage 126).
X To switch on:press the0064 button.
The indicator lampinthe 0064 button lights
up.
The climate controlsystem switches tothe
following functions:
R high airflow
R high temperature
R air distribution tothe windshield andfront
side windows
R <0044004C00550010005500480046004C005500460058004F00440057004C0052
0051[ modeoff
X To switch off:press the0064 button.
The indicator lampinthe 0064 button goes
out. Thepreviously selectedsettingsare
restored. Air-recirculation moderemains
deactivated.
or X Press the0058 button.
The indicator lampinthe 0064 button goes
out. Airflow andairdistribution aresetto
automatic mode.
or X Turn temperature control0043 or006C counter -
clockwise orclockwise (Ypage 116).
or X Press the0097 or0095 button. 120
Operat
ingthe climate controlsystemsClimat econ trol

MAX
COOLmaximum cooli ng
The MAX COOL function isonly available in
vehicl esfor the USA.
MAX COOL isonly opera tional whenthe
engine isrunning.
X To activate :press the00C9 button.
The indica torlamp inthe button lights up.
X To deactiv ate:press the00C9 button.
The indica torlamp inthe button goesout.
The previ ouslysele cted settings are
restored .
When youactiva teMAX COOL, climatecontrol
swi tches tothe followi ngfunctions:
R maximu mcooli ng
R maximu mairfl ow
R air-re circul ation mode on Removi
ngcondens ationfromthe
wi ndow s
Windo wsfogg edup onthe inside X
Activate the005A coolingwith airdehu midi-
ficatio nfunction.
X Activate the0058 mode button.
X Ifthe windo wscontinue tofog up,activa te
the 0064 "Windshie lddefros ting"function.
i You
shou ldonly selectthis setting untilthe
winds hieldis clea raga in. Windo
wsfogg edup onthe outside X
Activate thewinds hieldwip ers.
X Press the008F button repeatedlyuntilthe
009C or009B symbolapp ears inthe disp lay.
i You
shou ldonly selectthis setting untilthe
winds hieldis clea raga in. Rear
window defroste r
Gene ralnote s The
rear windo wdefros terhas ahigh current
draw .You shou ldtherefore switch itoff as
soon asthe rear windo wisclea r.Otherwi se,
the rear windo wdefros terswitches offauto-
matica llyafter severa lminutes.
If the battery voltageis too low,the rear win-
dow defros termay switch off.
Ac tivating /deactivating X
Turn theSmartKey toposi tion 0048inthe igni-
tion lock (Ypag e126).
X Press the006C button.
The indica torlamp inthe 006C button lights
up orgoes out.
Probl emswith the rear window defroste r Probl
em Poss
iblecause s/cons equen cesand 0050 0050
Sol utions The
rear windo w
defros terhas deactiva-
ted prema turelyor can-
not beactiva ted. The
on-board voltageis too low becau setoo many electrical con-
sume rsare switched on.
X Switch offany consumers thatarenot requ ired,e.g. read ing
lamp s,interior lighting orthe seat heating.
When thebattery issuffi ciently charged,the rear windo w
defros tercan beactiva tedagain. Operating
theclimate control systems
121Climate control

Switching
air-recirculation mode
on/off
General notes If
you switch on<0044004C00550010005500480046004C005500460058004F00440057004C0052
0051[ mode,the
windows canfogupmore quickly, inparticular
at low temperatures. Onlyuse<0044004C00550010005500480046004C005500460058004F00440057004C0052
0051[
mode briefly toprevent thewindows fromfog-
ging up.
<002400460057004C005900440057004C0051004A001200470048004400460057
004C005900440057004C0051004A> X
Turn theSmartK eytoposition 0048inthe igni-
tion lock (Ypage 126).
X To activate: pressthe0072 button.
The indicator lampinthe 0072 button lights
up.
i Air-r
ecirculation modeisautomatically
activated athigh levels ofpollution orat
high outside temperatures. Whenair-recir-
culation modeisactivated automatically,
the indicator lampinthe 0072 button isnot
lit. Outside airisadded afterabout
30 minutes.
X To deactivat e:press the0072 button.
The indicator lampinthe 0072 button goes
out.
i Air-r ecirculation modedeactivates auto-
matically:
R after approximately fiveminutes atout-
side temperatures belowapproximately
41 ‡(5 †)
R after approximately fiveminutes ifcooling
with airdehumidification isdeactivated
R after approximately 30minutes atoutside
temperatures aboveapproximately 41‡
(5 †) ifthe "Cooli ngwith airdehumidifi-
cation" functionisactivated Switching
theresidual heatonoroff
General notes The
residual heatfunct ionisonly availa bleon
vehicles forCanada.
It is possible tomake useofthe residual heat
of the engine tocont inue heating thestation-
ary vehicle forupto30 minutes afterthe
engine hasbeen switched off.The heating
time depends onthe setinterior temperature. <002400460057004C005900440057004C0051004A001200470048004400460057
004C005900440057004C0051004A> X
Turn theSmartK eytoposition 0092inthe igni-
tion lock orremove it(Y page 126).
X To activate: pressthe004B button.
The indicator lampinthe 004B button lights
up.
i The
blower willrun atalow speed regard-
less ofthe airflow setting.
i If
you activate theresidual heatfunct ionat
high temperatures, onlythevent ilation will
be activated. Theblower runsatmedium
speed.
X To deactivat e:press the004B button.
The indicator lampinthe 004B button goes
out.
Residu alheat isdeactivated automatically:
R after approximately 30minutes
R when theignition isswitched on
R ifthe battery voltage drops Setting
theairvents Import
antsafety notes G
WARNING
Very hotorvery cold aircan flow from the
air vent s.This could result inburns orfrost-
bite inthe immediate vicinityofthe air
vent s.There isarisk ofinjury.
Make surethatallvehicle occupants always
maintain asufficient distancetothe airout-
lets. Ifnecessary, redirecttheairflow to
another areaofthe vehicle interior. G
WARNING
When AIRSCARF isswitched on,very hotair
can flow from thevent sin the head
restraint s.This could result inburns inthe
immediate vicinityofthe airvent s.There isa
risk ofinjury.
Reduce theheater output beforeitbecomes
too hot. 122
Setting
theairventsClimat econ trol