warning light MERCEDES-BENZ SL CLASS 2020 Owner's Manual

!
Only
close thetrunk oncetheroof islow-
ered completely. Otherwise,youcould dam-
age theroof.
If you close thetrunk lidbefore theroof is
lowered completely, theloadi ngaid switch
lights upand awarning tonesounds.
The opening dimensions ofthe trunk lidcan be
found inthe "Vehicle data"section
(Y page 330).
With theroof open, youcan usetheloadi ng
aid toraise thefolded roofinthe trunk to
make loadingeasier (Ypage 254). Thetrunk
partition opensautomaticall y.
You canunlock thetrunk lidifthe vehicle is
stationary andtheroof iscompletely openor
closed.
Do not leave theSmartKey inthe trunk. You
could otherwise lockyoursel fout.
The trunk lidcan be:
R opened/closed fromoutside
R opened andclosed automaticall yfrom out-
side (vehicles withtrunk lidremote closing
feature)
R opened andclosed automaticall yfrom
inside (vehicles withtrunk lidremote closing
feature)
R opened, closedorstopped duringoperation
without theuse ofyour hands (vehicles with
KEYLES S-GOandHAND S-FREE ACCESS)
R locked separately
R opened withtheemergency releasebutton
R unlocked withthemechanical key
You should preferably placeluggageorloads
in the trunk. Tru
nklidreversing feature
The trunk lidisequip pedwith anautomatic
reversing feature.Itreacts ifasolid object
obstructs orrestrict sthe trunk lidduring the
closing procedure. Thetrunk lidopens again
automaticall y.The automatic reversingfunc-
tion isonly anaid and isnot asubstitute for
your attent iveness tothe trunk lidwhile itis
closing. G
WARNING
The reversing featuredoesnotrespond:
R to soft, lightandthin objects, e.g.fingers
R over thelast 1/3 in(8 mm) ofthe closing
movement
The reversing featurecannotprevent some-
one being trapped inthese situations inpar-
ticular. Thereisarisk ofinjury.
Make surethatnobody parts areinclose
proximity duringtheclosing procedure.
If somebody becomestrapped:
R press the0054 button onthe SmartKey,
or
R pull orpress theremote operating switch
on the driver's dooror
R press theclosing orlocking buttononthe
trunk lid,or
R pull onthe trunk lidhandle Opening/
closing from outside
Opening X
Press the0036 button onthe SmartKey.
X Pull handle 0043.
X Lift the trunk lid.
If the trunk partition wasclosed, itopens
automaticall yand remains open.
With theroof open, youcan usetheloadi ng
aid toraise thefolded roofinthe trunk to
make loadingeasier (Ypage 254). Thetrunk
partition opensautomaticall y. 82
Tr
unkOpening andclosing

Problems
withtheside window s G
WARNING
If you close aside window againimmediately afterithas been blocked, theside window closes
with increased ormaximum force.Thereversing functionisthen notactive. Partsofthe body
could betrapped inthe closing areainthe process. Thisposes anincreased riskofinjury or
even fatalinjury.
Make surethatnoparts ofthe body areinthe closing area.Tostop theclosing process,
release theswitch orpush theswitch againtoreopen theside window. Problem
Possible
causes/co nsequences and0050 0050
Solutions A
side window cannot
be closed because itis
blocked byobject s,e.g.
leaves inthe window
guide. X
Remove theobject s.
X Close theside window. A
side window cannot
be closed andyoucan-
not see thecause. If
aside window isobstruct edduring closing andreopens again
slightly:
X Immediately afterthewindow blocks,pullthecorrespondin g
switch againuntiltheside window hasclosed.
The side window isclosed withincreased force.
If aside window isobstruct edagain during closing andreopens
again slightly:
X Immediately afterthewindow blocks,pullthecorrespondin g
switch againuntiltheside window hasclosed.
The side window isclosed without theautomatic reversingfunc-
tion. The
side windows can-
not beopened orclosed
using theconven ience
opening/c losingfea-
ture. The
SmartK eybattery isdischarged ornearly discharged.
X Check theSmartK eybattery (Ypage 77)and replace itifneces-
sary (Ypage 77). Roof
Import
antsafety notes G
WARNING
If you donot fully open/close thesoft top,
the soft- tophydraul icsdepressurize aftera
short time.Thiscauses thesoft toptolower
unexpect edlyandmay cause youorothers
to be trapped. Thereisarisk ofinjury.
Always openorclose thesoft topcom-
pletely. G
WARNING
Closing theroof manually isacomplicated
and techn ically demanding procedure,which
requires alot ofstren gth.Youorothers can
become trapped. Thereisarisk ofinjury.
Only have thesoft topclosed manually ata
quali fiedspecialist workshop.
! Never
siton the rear compartmen ttrim or
stow heavy objectsthere. Youwillotherwise
damage theroof andrear compartmen ttrim
of the vehicle. 90
RoofOpening
andclosing

Switching
theseat heating on/off
Switching on/off G
WARNING
Repeatedly switchingonthe seat heating
can cause theseat cushion andbackrest
pads tobecome veryhot.Thehealth ofper-
sons withlimited temperature sensitivityor
a limited abilityto react tohigh tempera-
tures maybeaffected orthey mayeven suf-
fer burn-like injuries.Thereisarisk ofinjury.
Therefore, donot switch theseat heating on
repeatedly.
! When
theseat heating isswitched on,the
seat surface canbedamaged asaresult of
object sbeing placed onthe seats, forexam-
ple, seat cushions, childseats andprotec-
tive covers notapproved byMercedes-B enz.
Ensure thatthere arenoobject son the seat
surface whentheseat heating isswitched
on. Driver's
andfront -passenger seat The
three redindicator lampsinthe button
indicate theheating levelyouhave selected.
The system automatically switchesdownfrom
level 3to level 2after approximately eight
minutes.
The system automatically switchesdownfrom
level 2to level 1after approximately ten
minutes.
The system automatically switchesoffapprox-
imately 20minutes afteritis set tolevel 1.
X Make surethattheSmartK eyisin position
0047 or0048 inthe ignition lock.
X To switch on:press button 0043repeatedly
until thedesired heating levelisset.
X To switch off:press button 0043repeatedly
until allthe indicator lampsgoout.
i If
the battery voltage istoo low, theseat
heating mayswitch off.
Problems withtheseat heating Problem
Possible
causes/co nsequences and0050 0050
Solutions The
seat heating has
switched offprema-
turely orcannot be
switched on.The vehi-
cle's electrical system
voltage istoo low
because toomany elec-
trical consumers are
switched on. Switch
offelectrical consumers thatyoudonot need, suchasthe
rear window defroster orinterior lighting.
Once thebattery issufficiently charged,switchonthe seat heating
again. Seats
101Seats,steering wheeland mirrors Z

Switching
theseat ventilation on/off
Switching on/off The
three blueindicator lampsinthe buttons
indicate theblower settingyou have selected.
X Ensure thattheSmartK eyisin position 0048
in the ignition lock.
X To switch on:press button 0043repeatedly
until thedesired blowersettingis set.
X To switch off:press button 0043repeatedly
until allthe indicator lampsgoout.
i If
the battery voltage istoo low, theseat
vent ilation mayswitch off.
i If
you open theroof using theSmartK ey
(Y page 92),thedriver's seatventilation is
automatically switchedonand theside win-
dows open.
Problems withtheseat ventilation The
seat ventilation hasswitched offprema-
turely orcannot beswitched on.The vehicle's
electrical systemvoltage istoo low because
too many electrical consumers areswitched
on.
X Switch offelectrical consumers thatyoudo
not need, suchasthe rear window defroster
or interior lighting.
X Once thebattery issufficiently charged,
switch onthe seat heating again. AIRSCA
RF
Setting headlevelheating (AIRSCARF) G
WARNING
When AIRSCARF isswitched on,very hotair
can flow from thevent sin the head
restraint s.This could result inburns inthe
immediate vicinityofthe airvent s.There isa
risk ofinjury.
Reduce theheater output beforeitbecomes
too hot. The
AIRSCARF functionwarms thehead and
neck areaofvehicle occupants withwarm air.
The warm airflows outofthe holes inthe head
restraint s.
The three redindicator lampsinthe button
indicate theheating levelyouhave selected.
X Ensure thattheSmartK eyisin position 0048
in the ignition lock.
X To switch on:press button 0043.
Three redindicator lampsinthe button light
up. The blower startsupafter apreheating
phase ofseven seconds.
X Press button 0043repeatedly untilthedesired
heating levelisset.
X To switch off:press button 0043repeatedly
until allthe indicator lampsgoout.
i The
blower continues running forseven
seconds tocool down theheating elements.
i If
the battery voltage istoo low, AIRSCARF
may switch off. 102
SeatsSeats,
steering wheeland mirrors

Mirrors
Exteri
ormirrors
Adjusting theexteri ormirrors G
WARNING
You couldlose control ofyou rvehicl eif you
do the followi ngwhi ledrivi ng:
R adju stthe drive r'sseat, headrestrai nt,
steering wheelor mirrors
R fasten theseat belt
There isarisk ofan accide nt.
Adjust thedrive r'sseat, headrestrai nt,
steering wheeland mirror andfasten your
seat beltbefore starting theengine. G
WARNING
The exterior mirroronthe front-passeng er
side reducesthesize ofthe imag e.Visi ble
objects areactua llycloser thantheyappear.
This means thatyoucouldmisjud gethe dis-
tance fromroaduserstraveli ngbehi nd,e.g.
when changi nglane .There isarisk ofan
accide nt.
For this reas on,alwaysmake sureofthe
actua ldista ncefrom theroad userstraveli ng
behi ndbyglancing overyourshou lder. X
Make surethattheSmartKey isin posi tion
0047 or0048 inthe ignitio nlock.
X Press button 0043for the left exterior mirror
or button 0044for the right exterior mirror.
The indica torlamp inthe correspo ndingbut-
ton lights upinred.
The indica torlamp goesoutagainafter
some time.Youcanadju stthe sele cted exterior
mirrorusing button 0087aslong as
the indica torlamp islit.
X Press button 0087up, dow n,to the right orto
the left.
The exterior mirrormustbeset toaposi tion
that provi desyou with agood overvi ewof
traffic conditions.
The convex exterior mirrorsprovidealarg er
fiel dof visi on.
The exterior mirrorsareautomatica llyhea ted
after starting thevehicl eif the rear windo w
defros terisswi tched onand theoutsi detem-
pera ture islow .Mirror heating lastsup to10
minutes.
i You
canalsohea tup the exterior mirrors
manua llyby swi tching onthe rear windo w
defros ter.
Fo lding theexteri ormirrors inor out
ele ctrical ly X
Make surethattheSmartKey isin posi tion
0047 or0048 inthe ignitio nlock.
X Briefl ypress button 0043.
Both exterior mirrorsfoldinor out.
i Make
surethattheexterior mirrorsare
alw aysfolde dout fullywhi ledrivi ng.They
coul dotherwi sevibra te.
Exteri ormirror pushed outofposi tion If
an exterior mirrorhasbeen pushed outof
posi tion, procee das foll ows:
X Move theexterior mirrorintothecorrect
posi tion manua lly.
The mirror housingisengag edaga inand
you can adju stthe exterior mirrorsasusu al
(Y pag e105) . Mirrors
105Seats,steering wheeland mirrors Z

The
blue 0057 indicator lampinthe instr u-
ment cluster lightsupwhen thehigh-beam
headlamps areswitched on.
X To
switch offthe high-beam headlamps:
move thecombinat ionswitch backtoits
normal position.
The blue 0057 indicator lampinthe instr u-
ment cluster goesout. Haza
rdwarning lamps X
To
switch onthe haza rdwarning lamps:
press button 0043.
All turn signals flash.Ifyou now switch ona
turn signal usingthecombinat ionswitch,
only theturn signal lamponthe correspon d-
ing side ofthe vehicle willflash.
X To
switch offthe haza rdwarning lamps:
press button 0043.
The hazard warning lampsautomatically
switch onif:
R an air bag isdeployed or
R the vehicle decelerates rapidlyfromaspeed
of above 45mph (70km/ h)and comes toa
standst ill
The hazard warning lampsswitch offautomati-
cally ifthe vehicle reaches aspeed ofabove
6 mph (10km/ h)again afterafull brake appli-
cation.
i The
hazard warning lampsstilloperate if
the ignition isswitched off. Cornering
lightfunction
The corn ering lightfunct ionimproves theillu-
mination ofthe road overawide angle inthe
direction youareturnin g,enabling bettervisi-
bility intight bends, forexample. Thecorn er- ing
light funct ioncan only beactivated when
the low-beam headlamps areswitched on.
Active:
R ifyou aredriving atspeeds below25mph
(40 km/ h)and switch onthe turn signal or
turn thesteerin gwheel
R ifyou aredriving atspeeds between 25mph
(40 km/ h)and 45mph (70km/ h)and turn
the steerin gwheel
The corn ering lampmayremain litfor ashort
time, butisautomatically switchedoffafter no
more thanthree minutes.
Cornering lightfunction withtraffic circle
function:
The corn ering lightfunct ionisactivated on
both sides before enteringatraff iccircle
through anevaluation ofthe current GPSposi-
tion ofthe vehicle. Itremains activeuntilafter
the vehicle hasleftthetraff iccircle. Inthis
way, pedestrians crossingthe road, forexam-
ple, areilluminated byyour vehicle ingood
time. Active
lightfunction
The active lightfunct ionisasystem that
moves theheadlamps accordingtothe steer-
ing movemen tsof the front wheels. Inthis
way, relevant areasremain illuminated while
driving. Thisallows youtorecogn izepedes-
trians, cyclists andanimals sooner.
Active: whenthelights areswitched on.
Vehicles withLane Keeping Assist:the active
light funct ionevaluates thecourse ofthe lane
in which youaredriving andpre-empt ively
cont rolstheactive lightfunct ion. Adapt
iveHighbeam Assist
General notes You
canusethis funct iontoset the headlamps
to change between lowbeam andhigh beam
automatically. Thesystem recognizesvehicles
with their lights on,either approaching from
the opposite direction ortraveling infront of
your vehicle, andconsequent lyswitches the
headlamps fromhighbeam tolow beam.
The system automatically adaptsthelow-beam
headlamp rangedepending onthe distance to
the other vehicle. Oncethesystem nolonger Exterior
lighting
111Lightsandwindshield wipers Z

Switching
air-recirculation mode
on/off
General notes If
you switch on<0044004C00550010005500480046004C005500460058004F00440057004C0052
0051[ mode,the
windows canfogupmore quickly, inparticular
at low temperatures. Onlyuse<0044004C00550010005500480046004C005500460058004F00440057004C0052
0051[
mode briefly toprevent thewindows fromfog-
ging up.
<002400460057004C005900440057004C0051004A001200470048004400460057
004C005900440057004C0051004A> X
Turn theSmartK eytoposition 0048inthe igni-
tion lock (Ypage 126).
X To activate: pressthe0072 button.
The indicator lampinthe 0072 button lights
up.
i Air-r
ecirculation modeisautomatically
activated athigh levels ofpollution orat
high outside temperatures. Whenair-recir-
culation modeisactivated automatically,
the indicator lampinthe 0072 button isnot
lit. Outside airisadded afterabout
30 minutes.
X To deactivat e:press the0072 button.
The indicator lampinthe 0072 button goes
out.
i Air-r ecirculation modedeactivates auto-
matically:
R after approximately fiveminutes atout-
side temperatures belowapproximately
41 ‡(5 †)
R after approximately fiveminutes ifcooling
with airdehumidification isdeactivated
R after approximately 30minutes atoutside
temperatures aboveapproximately 41‡
(5 †) ifthe "Cooli ngwith airdehumidifi-
cation" functionisactivated Switching
theresidual heatonoroff
General notes The
residual heatfunct ionisonly availa bleon
vehicles forCanada.
It is possible tomake useofthe residual heat
of the engine tocont inue heating thestation-
ary vehicle forupto30 minutes afterthe
engine hasbeen switched off.The heating
time depends onthe setinterior temperature. <002400460057004C005900440057004C0051004A001200470048004400460057
004C005900440057004C0051004A> X
Turn theSmartK eytoposition 0092inthe igni-
tion lock orremove it(Y page 126).
X To activate: pressthe004B button.
The indicator lampinthe 004B button lights
up.
i The
blower willrun atalow speed regard-
less ofthe airflow setting.
i If
you activate theresidual heatfunct ionat
high temperatures, onlythevent ilation will
be activated. Theblower runsatmedium
speed.
X To deactivat e:press the004B button.
The indicator lampinthe 004B button goes
out.
Residu alheat isdeactivated automatically:
R after approximately 30minutes
R when theignition isswitched on
R ifthe battery voltage drops Setting
theairvents Import
antsafety notes G
WARNING
Very hotorvery cold aircan flow from the
air vent s.This could result inburns orfrost-
bite inthe immediate vicinityofthe air
vent s.There isarisk ofinjury.
Make surethatallvehicle occupants always
maintain asufficient distancetothe airout-
lets. Ifnecessary, redirecttheairflow to
another areaofthe vehicle interior. G
WARNING
When AIRSCARF isswitched on,very hotair
can flow from thevent sin the head
restraint s.This could result inburns inthe
immediate vicinityofthe airvent s.There isa
risk ofinjury.
Reduce theheater output beforeitbecomes
too hot. 122
Setting
theairventsClimat econ trol

Key
isin the vehicle .This occurs, forexampl e,
when starting theengine.
To start thevehicle withoutactively usingthe
SmartKey:
R the Start/St opbutton mustbeinserted in
the ignition lock.
R the SmartKey mustbeinthe vehicle .
R the vehicle mustnotbelocked withthe
SmartKey orKEYLESS- GO(Ypage 74).
Do not keep theSmartKey:
R with electronic devices,e.g.amobil ephone
or another SmartKey.
R with metall icobjects, e.g.coins ormetal
foil.
R inside metallicobjects, e.g.ametal case.
This canimpa irthe functionali tyof the KEY-
LESS- GOkey.
If you lock thevehicle withtheSmartKey's
remote controlorwith KEYLESS- GO,after a
short time:
R you willnot beableto switch onthe ignition
with theStart/St opbutton.
R you willnot beableto start theengine with
the Start/St opbutton untilthevehicle is
unlocked again.
The engine canbeswitched offwhil ethe vehi-
cle isin motion bypressi ngand holdi ngthe
Start/St opbutton forthree seconds. This
function operatesindepe ndently ofthe ECO
start/stop automaticengine switch-off func-
tion.
Key positio nswith KEYLESS-GO 0043
Start/St opbutton
0044 Ignition lock
As soon asthe ignition isswitched on,allthe
indicator lampsin the instrument clusterlight
up. Further information onsitua tions where an
indicator lampeither failsto go out after start- ing
the engine orligh tsup whil edriving
(Y page 238).
If Start/St opbutton 0043has notyetbeen
pressed ,this corresponds tothe key being
removed fromtheignition.
X To swi tch onthe powe rsupply: press
Start/St opbutton 0043once.
The powe rsupp lyisswitched on.You can
now activate thewindsh ieldwipers, for
exampl e.
The powe rsupp lyisswitched offaga inif:
R the driver's doorisopened and
R you press Start/St opbutton 0043twice
when inthis positio n
X To swi tch onthe ignition: press Start/
Stop button 0043twice.
The ignition isswitched on.
If you press Start/St opbutton 0043once
when inthis positio n,the ignition is
switched offaga in.
Removing theStart/Stop button
You canremove theStart/St opbutton from
the ignition lockandstart thevehicle asnor-
mal using theSmartKey.
X Remove Start/Stopbutton 0043from ignition
lock 0044.
You donot have toremove theStart/St opbut-
ton from theignition lockwhen youleavethe
vehicle .You shoul d,howeve r,alw aystake the
SmartKey withyouwhen leaving thevehicle .
As long asthe SmartKey isin the vehicle :
R the vehicle canbestarted usingtheStart/
Stop button
R the electrical lypowe redequi pment canbe
opera ted Starting
theengi ne
Important safetynotes G
WARNING
If childre nare left unsup ervised inthe vehi-
cle, they could :
R opera tethe vehicle 'sequi pment Drivi
ng
127Drivi ngand parking
Z

Problem
Possible
causes/co nsequences and0050 0050
Solutions The
engine isnot run-
ning smoothly andis
misfiring. There
isamalfunction inthe engine electron icsorinamechanical
componen tof the engine management system.
X Only depress theaccelerator pedalslightly.
Otherwise, non-combusted fuelmay getinto thecatalytic con-
verter anddamage it.
X Have thecause rectified immediately ataqual ified specialist
workshop. The
coolant tempera-
ture display showsa
value above 248‡
(120 †).The coolant
warning lampmayalso
be on and awarning
tone maysound. The
coolant levelistoo low. Thecoolant istoo hotand theengine is
no longer beingcooled sufficiently.
X Stop assoon aspossible andallow theengine andthecoolant to
cool down.
X Check thecoolant level(Ypage 270). Observe thewarning notes
as you dosoand add coolant ifnecessary. If
the coolant leveliscorrect ,the engine radiator fanmay befaulty.
The coolant istoo hotand theengine isno longer beingcooled suf-
ficiently.
X At coolant temperatures below248‡(120 †),drive tothe near-
est quali fiedspecialist workshop.
X Avoid heavy loadsonthe engine asyou doso, e.g. driving in
mountainous terrainandstop-and- gotraffic. Notes
ontowing vehicles
The vehicle isnot suitable forattaching tow
bar systems, suchasthose usedforflat tow-
ing ordinghy towing.
Att aching orusing towbarsystems mayresult
in damage tothe vehicle.
When towing avehicle withtowbarsystems,
safe driving characterist icscannot beguaran-
teed forthe towing vehicle orthe towed vehi-
cle.
The vehicle/vehicle combinationmayswerve.
Observe thepermissible towingmethods
(Y page 292)andthenotes ontowing with
both axles onthe ground (Ypage 292). DYNAMIC
SELECTcontroller General
informat ion
Select thedrive program usingtheDYNAMIC
SELE CTcont roller. Available
driveprogra ms: I
Individual Individual
settings C
Comfort Comfort-
oriented, opti-
mum-econ omyengine and
transmission settings S
Sport Sporty
engine andtrans-
mission settings S+
Sport Plus Particularly
sportytrans-
mission settings Race
Maximum
sportiness and
engine andtransmission
settin gssuitable forthe
racetrack Depending
onthe drive program selected the
following vehiclecharacterist icswill change:
R the drive (engine management)
R the transmission management
R ESP ®
R the suspension
R the steering 132
DY
NAMIC SELECTcontrolle rDrivingandparking

Selec
tingthedrive progra m X
Turn DYNAMI CSEL ECT controller 0043as
many times asnecessary untilthedesired
drive program isselected.
The symbol ofthe selected driveprogram is
shown inthe multifunct iondisplay .
In addition, thecurrent driveprogram set-
tings aredisplay edbriefly inthe multimedia
system display.
The drive program indicator onDYNAMIC
SEL ECT controller 0043lights upinred.
Additional information fordrive programs
(Y page 139). Additional
settings 0043
ECO start/ stopfunct ion(Ypage 129)
0044 ESP ®
(Y page 65)
0087 Suspension (Ypage 173)
0085 Permanent activationofmanual gearshift-
ing (Ypage 142)
When youpress buttons 0043-0085 the corre-
sponding settingis selected. TheDYNAMIC
SEL ECT controller settingis overwritten .These
settingswill also bemaintained ifyou
switch todrive program RACE,S+,Sor Cwith
the DYNAMI CSEL ECT controller.
If you switch todrive program I,all stored
characterist icswill beaccepted. Thisisalso
the case ifyou have previously pressedbut-
tons 0043-0085. Automat
ictransmission Import
antsafety notes G
WARNING
If the engine speedisabove theidling speed
and youengage transmissionposition 003A
or 0046, thevehicle couldpullaway sud-
denly. Thereisarisk ofan accident.
When engaging transmissionposition 003A
or 0046, alwaysfirmly depress thebrake
pedal anddonot simultaneously accelerate. G
WARNING
The automatic transmissionswitches toneu-
tral position Nwhen youswitch offthe
engine. Thevehicle mayrollaway .There isa
risk ofan accident.
Aft erswitching offthe engine, alwaysswitch
to parking position P.Prevent theparked
vehicle fromrolling awaybyapply ingthe
parking brake. Selec
torlever
Overview oftransmission positions All
vehicles (exceptMercedes-AMG vehi-
cles)
! If
the engine speedistoo high orthe vehi-
cle isin motion, donot shift theautomatic
transm issiondirectly from005Bto005E, from
005E to005B ordirectly to005D.
Do not open thedriver's doorwhile thevehi-
cle isin motion. Atlow speeds intransm is-
sion position 005Bor005E, otherwise parkposi-
tion 005Disengaged automatically.
The transm issioncouldbedamaged. Automat
ictransmission
135Drivingandparking Z