start stop button MERCEDES-BENZ SLC 2018 User Guide

i You can star tt he engin eint ra nsmission
position ] and \\ .
Starting procedur ew ith th eS martKeyTo star tt he engin eu sing the SmartKey instead
of KEYLESS-GO, pull the Start/Stop button out
of the ignition lock. X
Turn the SmartKey to position I in the igni-
tion lock ( Y
page 116 )a nd release it as soon
as the engin eisr unning.
Using KEYLESS-GO to start th ee ngineThe Start/Stop button can be used to star tt he
vehicle manually without insertin gt he SmartKey
int ot he ignition lock .T he Start/Stop button
must be inserted in the ignition lock and the
SmartKey must be in the vehicle. This mode for
startin gt he engin eo perates independently of
the ECO start/sto pa utomatic engin es tar tf unc-
tion. X
Depress the brak ep edal and keep it
depressed. X
Press the Start/Stop button once
( Y
page 116).
The engin es tarts.
Pulling away
Genera ln otes
G WARNING
If the engin es peed is above the idling speed
and you engage transmission position D or R ,
the vehicle could pull away suddenly. There is
ar isk of an accident.
When engagin gt ra nsmission position D or R ,
always firmly depres st he brak ep edal and do
not simultaneously accelerate.
! Change gear in good tim ea nd avoid spin-
nin gt he wheels. You could otherwise damage
the vehicle.
Depress the accelerator carefully when pulling
away.
The vehicle lock sc entrally onc ey ou have pulled
away. The locking knobs in the doors drop down.
You can open the doors from the inside at any
time. You can also deactivate the automatic locking
feature ( Y
page 173).
It is only possible to shift the transmission from
position ] to the desired position if you
depres st he brak ep edal. Only the nist he shift
lock released.
i Upshifts tak ep lace at higher engin es peeds
afte rac old start. This helps the catalytic con-
verter to reach its operating temperature
more quickly.
Information on the automatic release of the
electric parking brak e( Y
page 133).
Hill start assist Hill star ta ssist helps you when pulling away
forwar dorinr everse on an uphill gradient. It
holds the vehicle for as hor tt im ea fte ry ou have
removed your foot from the brak ep edal. This
gives you enough tim etom ove your foot from
the brak ep edal to the accelerator pedal and to
depres sitb efor et he vehicle begins to roll.
G WARNING
After as hor tt ime, hill star ta ssist will no lon-
ger brak ey our vehicle and it could roll away.
There is ar isk of an accident and injury.
Therefore, quickly move your foot from the
brak ep edal to the accelerator pedal. Never
leave the vehicle when it is held by hill start
assist.
Hill star ta ssist is not active if: R
you are pulling away on al evel road or on a
downhill gradient R
the transmission is in position \\R
the electric parking brak eisa ppliedR
ESP ®
is malfunctioning
ECO start/stop function
Introduction
The ECO start/sto pf unction switches the
engin eo ff automatically if the vehicle is stopped
under certain conditions.
The engin es tarts automatically when the driver
want stop ull away again. The ECO start/stop
function thereby helps you to reduce the fuel
consumption and emissions of your vehicle.118
Driving
Driving and parking

Problem
Possible causes/consequences and P Solutions
The engine is not running
smoothly and is misfir-
ing. There is am alfunction in the engine electronics or in am echanical
componen toft he engine management system.X
Only depress the accelerator pedal slightly.
Otherwise, non-combusted fuel may get into the catalytic converter
and damage it. X
Have the cause rectified immediately at aq ualified specialist work-
shop.
The coolant temperature
gauge shows av alue
above 248 ‡( 120 †).
The coolant warning
lamp may also be on and
aw arning tone may
sound. The coolant level is too low. The coolant is too hot and the engine is no
longer being cooled sufficiently. X
Stop as soon as possible and allow the engine and the coolant to
cool down. X
Check the coolant level ( Y
page 235). Observe the warning notes
as you do so and add coolant if necessary.
If the coolant level is correct ,t he engine radiator fan may be faulty. The
coolant is too hot and the engine is no longer being cooled sufficiently. X
At coolant temperatures below 248 ‡( 120 †), drive to the nearest
qualified specialist workshop. X
Avoid heavy loads on the engine as you do so, e.g. driving in moun-
tainou st errai na nd stop-and-go traffic.
DYNAMIC SELEC Tb uttonUse the DYNAMIC SELECT button to change the
drive program. Depending on the drive program
selected the following vehicle characteristics
wil lc hange: R
the drive (engine and transmission manage-
ment) R
the suspensio nort he adaptive adjustable
damping (only on vehicles with AMG RIDE
CONTROL sports suspension) R
the sound of the exhaust system (vehicles
with sports exhaust system) R
the steering R
the availability of the ECO start/stop function
Each time you start the engine with the Smart-
Key or the Start/Stop button, drive program C is
activated. For further information about starting
the engine, see ( Y
pag e1 17). X
Press DYNAMIC SELECT button C as many
times as necessary until the desired drive
progra miss elected.
The selected drive progra ma ppears in the
multifunction display. After as hort period of
time, the displa yg oes out and the symbol for
the selected drive progra ma ppears.
In addition, the current drive progra ms ettings
are displayed briefly in the multimedi as ystem
display.
i In af ew countries, the ECO start/stop func-
tion is deactivated at the factory due to the
available fuel grade. In this case, the ECO
start/stop function is not available in anyDYNAMI CS ELEC Tb utton 121
Driving and parking Z

The current transmission position and drive pro-
gram appear in the multifunction display.
Mercedes-AMG SLC 43
C
Transmission positionD
Drive program
The current transmission position and drive pro-
gram appear in the multifunction display.
Engaging par kp osition P
X
When the vehicle is stationary, depress the
brake pedal. X
Press button C .
Engaging par kp osition Pa utomaticallyPark position ] is automatically engaged if:R
you switch off the engine using the SmartKey
and remove the SmartKey R
you switch off the engine using the SmartKey
or using the Start/Stop button and open the
driver's door or front-passenger door R
you open the driver's door when the vehicle is
stationary or when driving at av ery low speed
and the transmission is in position [ or ^
Under certain conditions, the automatic trans-
mission shifts automatically to transmission
position ] if the HOLD function or Distance
Pilot DISTRONIC is activated. Observe the infor-
mation on the HOLD function ( Y
page 148) and
on Distance Pilot DISTRONIC ( Y
page 144). Engaging reverse gear R
! Only move the automatic transmission to
^ when the vehicle is stationary. X
Depress the brake and keep it pressed. X
Push the selector lever forwards past the first
point of resistance.
The ECO start/sto pf unction is not available
when reverse gear is engaged. Further informa-
tion on the ECO start/sto pf unction
( Y
page 119).
Shifting to neutral N
G WARNING
If children are left unsupervised in the vehicle,
they could: R
operate the vehicle's equipment.
Additionally, children could set the vehicle in
motion if, for example, they: R
release the parking brake R
shift the automatic transmission out of park
position P R
start the engine
There is ar isk of an accident and injury.
Never leave children or animals unattended in
the vehicle.
When leaving the vehicle, alway st ake the
SmartKey with you and lock the vehicle. This
also applies to mobile phones if the "Digital
Car Key in smartphone" function is activated
via the Mercedes me connect web app. X
When the vehicle is stationary, depress the
brake pedal. X
Push the selector lever forwards or back to
the first point of resistance.
If you switch the engine off with the transmis-
sion in position ^ or [ ,t he automatic trans-
mission shifts to \\ automatically.
With the SmartKey: if you then open the driv-
er's door or the front-passenger door or remove
the SmartKey from the ignition, the automatic
transmission shifts to ] automatically.
With KEYLESS-GO: if you then open the driver's
or front-passenger door, the automatic trans-
mission shifts to ] automatically.Automatic transmission 123
Driving and parking Z

If you want the automatic transmission to
remain in neutral \\ ,e .g. when having the vehi-
cle cleaned in an automatic car wash with a
towing system: X
Vehicles with KEYLESS-GO: remove the
Start/Stop button from the ignition lock. X
Insert the SmartKey into the ignition lock. X
All vehicles: switch the ignition on.X
Depress the brake peda la nd keep it
depressed. X
Engage neutral \\ .X
Release the brake pedal. X
Release the electric parking brake. X
Switch off the ignition and leave the SmartKey
in the ignition lock.
Engaging drive positio nDX
When the vehicle is stationary ,d epres st he
brake pedal. X
Push the selector lever back past the first
point of resistance. Transmission positions E Park position
This prevents the vehicle from rolling
awa yw hen stopped.
Only shift the transmission into posi-
tion E ( Y
page 122) when the
vehicle is stationary .T he parking lock
shoul dn ot be used as ab rake when
parking. Alway sa ppl yt he electronic
parking brake in addition to the park-
ing lock in order to secure the vehi-
cle.
If the SmartKey is removed from the
ignition lock, the transmission is
locked.
The automatic transmission shifts to
E automatically: R
when the SmartKey is removed
from the ignition lock R
when the engine is switched off
with the transmission in position
F or : and one of the doors
is opened
In the event of am alfunction of the
vehicle's electronics, the transmis-
sion may lock in position E .H ave
the vehicle electronics checked
immediately at aq ualifie ds pecialist
workshop.
F Reverse gear
Only shift the transmission into posi-
tion F when the vehicle is sta-
tionary.124
Automatic transmission
Driving and parking

When the HOLD function is activated, the trans-
mission is automatically shifted to position ]
if: R
the driver's seat belt is not fastened and the
driver's door is open. R
the engine is switched off, unless it is auto-
matically switched off by the ECO start/stop
function.
The electric parking brake secures the vehicle
automatically if the HOLD function is activated
when the vehicle is stationary and: R
as ystem malfunction occurs. R
the power supply is not sufficient.
If am alfunction in the electric parking brake
occurs ,t he transmission may also be shifted
into position ] automatically.
Adaptive damping system
General notes
i Mercedes-AMG SLC 43: the adaptive
damping system is called AMG RIDE CON-
TROL sports suspension.
As uspension with the adaptive damping system
provides improved driving comfort and contin-
uously controls the calibration of the dampers.
The damping characteristic sa dapt to the cur-
rent operating and driving situation.
The damping is tuned individually to each wheel
and depends on: R
your driving style, e.g. sporty R
the road surface conditions R
the selected drive program ( Y
page 121).
Selecting the Comfort or Economy drive
programs In the Comfort and Economy drive programs,
the driving characteristic sofy our vehicle are
more comfortable. Select one of these drive
programs if you favor am ore comfortable driv-
ing style. Also select these drive programs when
driving fast on straight roads, e.g. on straight
stretches of highway.
In urban traffic and stop-start traffic, drive pro-
gram C is recommended. X
Press DYNAMIC SELECT button C repeat-
edly until the Comfort or Economy drive pro-
gram is selected.
Selecting Sport mode The firmer setting of the suspension tunin gi n
the Sport drive program ensures even better
contact with the road. Select this drive program
when employing as porty driving style, e.g. on
winding country roads. X
Press DYNAMIC SELECT button C as many
times as necessary until the Sport drive pro-
gram is selected.
Selecting Sport Plus mode The firmer suspension settings in the Sport
Plus drive program ensure even better contact
with the road. Select this mode when employing
as porty driving style, e.g. on winding country
roads or, ideally ,w hen driving on closed race
circuits. X
Press DYNAMIC SELECT button C repeat-
edly until the Sport Plus drive program is
selected.
Parking Assist PARKTRONIC
Important safety notes Parking Assist PARKTRONIC is an electronic
parking aid with ultrasound. It monitors the area
around your vehicle using six sensor sint he
fron tb umper and four sensor sint he rear
bumper. Parking Assist PARKTRONIC visually
and audibly indicates the distanc eb etween your
vehicle and an object.
Parking Assist PARKTRONIC is only an aid. It is
not ar eplacemen tf or your attention to your
immediate surroundings. You are always
responsible for safe maneuvering, parking and
exitin gap arking space. Make sure that thereDriving systems 149
Driving and parking Z

Workin gint he engine compartment poses a
risk of injury.
Where possible, let the engine cool down and
touch only the component sd escribed in the
following.
G WARNING
The cooling system is pressurized, particularly
when the motor is warm. If you open the cap,
you could be scalded if hot coolant sprays out.
There is ar isk of injury.
Let the engine cool down before you open the
cap. Wear gloves and eye protection. Slowly
open the cap to relieve pressure.
Example X
Park the vehicle on al evel surface.
Only check the coolant level when the vehicle
is on al evel surface and the engine has cooled
down. X
Turn the SmartKey to position H in the igni-
tion lock ( Y
page 116).
On vehicles with KEYLESS-GO, press the
Start/Stop button twice ( Y
page 116).X
Check the coolant temperature gage in the
multifunction display.
The coolant temperature must be below
158 ‡( 70 †).X
Turn the SmartKey to position

Towin ga nd tow-starting
Important safety notes
G WARNING
When towing or tow-startin ga nothe rv ehicle
and its weight is greate rt ha nt he permissible
gross weight of your vehicle, the: R
the towing ey ec ould detach itselfR
the vehicle/trailer combinatio nc ould roll-
over.
There is ar is kofana ccident.
When towing or tow-startin ga nothe rv ehicle,
its weight shoul dn ot be greate rt ha nt he per-
missibl eg ross weight of your vehicle.
Detail sont he permissibl eg ross vehicl ew eigh t
of your vehicl ec an be found on the vehicl ei de n-
tification plate ( Y
page 289).
! When Activ eB rake Assist, Distance Pilot
DISTRONI Cort he HOLD functio ni sa ctivated,
the vehicl eb rakes automaticall yinc ertain
situations.
To avoi dd amag etot he vehicle, deactivate
these system sint he following or similar sit-
uations: R
when towing the vehicle R
in the car wash
! Onl ys ecur et he tow rop eort ow ba ratt he
towing eyes. Otherwise, the vehicl ec ould be
damaged.
! Do not us et he towing ey ef or recovery, this
could damage the vehicle. If in doubt, recover
the vehicl ew it hac rane.
! When towing ,p ul la wa ys lowly and
smoothly. If the tractiv ep ower is too high, the
vehicles could be damaged.
! Do not tow with sling-typ ee quipment .T h is
could damage the vehicle.
! When towing away vehicles with KEYLESS-
GO ,u se the key instea doft he Start/Stop
button. The automatic transmission ma yo th-
erwis es hift to position ] when yo uo pe nt he
driver's or front-passenge rd oo r, which could
damage the transmission. ! Make sure tha tt he electri cp ar kin gb rake is
released .Ift he electri cp ar kin gb rake is faulty,
visit aq uali fied specialis tw or kshop.
! The vehicl ec an be towed am ax imum of
30 miles (50km). The towing spee dof30m ph
(50 km/h )m us tn ot be exceeded.
If the vehicl eh as to be towed mor et han
30 miles (50km), the entire vehicl em us tb e
raised and transported.
! If yo ut ow or tow-start anothe rv ehicle, its
weight must not exceed the maximum per-
missibl eg ross vehicl ew eigh tofy ou rv ehicle.
It is better to have the vehicl et ransporte dt han
to have it towed away.
The automatic transmission must be in position
\\ when the vehicl eisb ei ng towed away.
The battery must be connected and charged.
Otherwise, you: R
canno tt ur nt he SmartKe ytop osit ion H in
the ignition lock. R
canno ts hift the automatic transmission to
position \\ .
Deactivate the automatic locking featur eb ef o re
th
e vehicl eist owed ( Y
page 173) .Y ou could
otherwis ebel oc ked ou tw he np us hing or towing
the vehicle.
Installing/removin gt he towin ge ye
Installing the towin ge ye
G WARNING
The exhaust tai lp ip em ay be ver yh ot. There is
ar is kofb ur ns when removing the rea rc over.
Do not touch the exhaust pipe .T ak ep ar ticular
car ew he nr emoving the rea rc over.256
Towin ga nd tow-starting
Breakdow na ssistance

The bracket sf or the screw-in towing eye are
located in the bumpers. They are at the front and
at the rear, behind the covers. X
Remove the towing eye from the vehicle tool
kit ( Y
page 245).X
Press the mark on cover C inwards in the
direction of the arrow. X
Take cover C off the opening.X
Screw in the towing eye clockwise as far as it
will go and tighten it.
Removing the towing eye X
Unscrew and remove the towing eye. X
Attach cover C to the bumper and press until
it engages. X
Place the towing eye in the vehicle tool kit.
Towing av ehicle with both axles on
the ground
G WARNING
You can no longer steer the vehicle if the
steerin gw heel lock has been engaged. There
is ar isk of an accident.
Always switch off the ignition when towing the
vehicle with at ow cable or at ow bar.
The automatic transmission shifts to position
] automatically when you open the driver's or
front-passenger door or when you remove the
SmartKey from the ignition lock. In order to ensure that the automatic transmis-
sion stays in position \\ when towing away the
vehicle, you must observe the following points: X
Switch on the hazard warning lamps
( Y
page 97). X
Turn the SmartKey to position H in the igni-
tion lock.
On vehicles with KEYLESS-GO, use the Smart-
Key instead of the Start/Stop button
( Y
page 116). X
Depress and hold the brake pedal. X
Shift the transmission to position \\ .X
Release the brake pedal. X
Release the electric parking brake. X
Leave the SmartKey in position H in the igni-
tion lock.
In order to signal ac hange of direction when
towing the vehicle with the hazard warning
lamps switched on, use the combination switch
as usual. In this case, only the indicator lamps
for the direction of travel flash. When you reset
the combination switch, the hazard warning
flashers start flashing again.
It is important that you observe the safety
instructions when towing away your vehicle
( Y
page 256).
Towing the vehicle with the rear axle
raised
! The ignition must be switched off if you are
towing the vehicle with the rear axle raised.
Intervention by ESP ®
could otherwise dam-
age the brake system.
! Vehicles with automatic transmission must
not be towed with the rear axle raised. The
vehicle/trailer combination may otherwise
swerve or even roll over.Towing and tow-starting 257
Breakdown assistance Z

An arrow on the sidewall of the tire indicates its
correct direction of rotation.
Storin gw heelsStore wheels tha ta re not being used in ac ool,
dry and preferably dark place .P rotect the tires
from oil, grease, gasoline and diesel.
Mounting aw heel
Preparin gt he vehicleX
Stop the vehicl eons olid ,n on-slippery and
level ground. X
Apply the electri cp ar king brake manually.X
Bring the front wheels into the straight-ahead
position. X
Shift the transmission to position ] .X
Switch off the engine. X
Vehicles withou tK EYLESS -GO: remove the
SmartKe yf rom the ignition lock.X
Vehicles with KEYLESS-GO: open the driv-
er' sd oo r.
The vehicl ee le ctronics now have status 0 .
Thi sist he same as the SmartKe yh av ing been
removed. X
Vehicles with KEYLESS-GO: remove the
Start/Stop button from the ignition lock
( Y
page 116). X
If included in the vehicl ee quipment ,r emove
the tire-change tool kit from the vehicle. X
Safeguar dt he vehicl ea gain st rolling away.
i Due to difference sinv ehicl ee quipment ,n ot
al lv ehicles ar ee quippe dw it hat ire-change
tool kit. For informatio nonw hi ch tool sa re
required to perfor maw heel change on your
vehicle, consult an authorize dM ercedes-
Benz Center.
Necessary tire-changing tool sc an include, for
example: R
Jack R
Wheel chock R
Lu gw rench Securin gt he vehicle to preven titf rom
rolling away
If your vehicl eise quippe dw it haw heel chock, it
can be found in the tire-change tool kit
( Y
page 245).
The folding whee lc hoc ki sana ddit ional safety
measure to prevent the vehicl ef rom rolling
away ,f or exampl ew he nc hanging aw heel .X
Fol db ot hp la te su pwar ds C .X
Fol do ut lowe rp la te D .X
Guid et he lugs on the lowe rp la te full yi nto the
openings in base plate