ESP MERCEDES-BENZ SLK-Class 2008 R171 Comand Manual

63 Audio
MP3 operation

Press
 or  to select a different
option.

Press
.
The option is activated. A correspond
-
ing display will appear in the status bar
for all options except Normal
sequence
.
An option will remain activated even if
COMAND is switched OFF and then ON
again.

66 AudioCD changer* operation
In order to load CDs, you will need to open
the glove box.1CD slot2
Magazine compartment buttons
The CD changer has a built-in magazine
which can hold up to six CDs.

The CD changer has six magazine compart
-
ment buttons 2 for controlling the loading
procedure. LEDs in the buttons indicate the status of
the corresponding magazine compart
-
ment.
Button LED OFF:

Magazine compartment empty

Button LED flashes green:

CD changer requesting CD to be load
-
ed

Button LED continuously red:

Magazine compartment loaded with a
CD
The status of a magazine compartment can
also be seen when selecting a CD in the CD
Selection menu
( page
71)
.
The CD slot 1 for loading CDs into the CD
changer is located above the buttons 2.
!Do not attach labels of any type to the
CD. They may become detached and
damage the drive.Your CD drive has been designed to
play CDs which correspond to the IEC
60908 standard. Therefore only CDs
not exceeding a thickness of 1.3 mm
can be used. If you insert thicker data carriers, e.g.
ones that have data on both sides (one
side with DVD data, the other side with
audio data), they will become stuck and
damage the drive.Data carriers which contain data on
both sides can cause play-back prob
-
lems because the storage layers are
thinner than one-sided data carriers.
!Do not play single CDs (80mm) with an
adapter. An adapter could become
stuck and damage the drive. Only use
12 cm diameter CDs.iThe CD changer may not be able to play
audio CDs with copy protection.

67 Audio
CD changer* operation
Loading options:
Loading a single magazine compart
-
ment


Loading all six magazine compart
-
ments

Loading a single magazine compart
-
ment 
Open the glove box

( Vehicle owner's manual).

Briefly press the button 2 of the emp
-
ty magazine compartment to be load
-
ed.

Wait until the LED in the button 2
flashes green.This indicates that the CD changer re
-
quests a CD.

Insert an audio CD into the CD slot 1
within approx. 15 seconds. Insert the
CD face up.The CD is pulled in. The red LED in the
corresponding magazine compartment
button 2 lights up continuously. The
system starts playing the CD. The loading procedure is completed.
Loading all six magazine compart
-
mentsInitial situation: all magazine compart
-
ments are empty.The CD changer loads all magazine com
-
partments beginning with compartment 1.
Open the glove box

( Vehicle owner's manual).
1CD slot2
Magazine compartment buttons

Press and hold the button of an empty
magazine compartment 2 for more
than 2 seconds.The LEDs of all magazine compartment
buttons 2 briefly light up green sever
-
al times.

Wait until the LED in the first magazine
compartment button 2 flashes green.This indicates that the CD changer re
-
quests a CD.
iLoading a magazine slot will stop the
playback of a CD in the changer.


68 AudioCD changer* operation
Insert an audio CD into the CD slot 1
within approx. 15 seconds. Insert the
CD face up.The CD is pulled in; the magazine com
-
partment is loaded. The red LED in the corresponding mag
-
azine compartment button 2 lights up
continuously. The CD changer then requests inser
-
tion of the next CD. The LED in the cor
-
responding magazine compartment
button 2 flashes green.

Repeat the last step until all six maga
-
zine compartments are loaded.The system plays the sixth CD. The
LEDs in all magazine compartment but
-
tons 2 light up red continuously.The loading procedure is completed.
The following options are available:
Ejecting one CD

Ejecting all CDs
( page
69)
Ejecting one CD 1CD slot2
Magazine compartment buttons

Open the glove box

( Vehicle owner's manual).

Briefly press the appropriate magazine
compartment button 2.The button LED 2 flashes red. The CD
changer ejects the CD.

Within 15 seconds, remove the CD
from the slot 1.
iIf, for example, only compartments 1
through 4 are to be loaded instead of
all six compartments, simply do not in
-
sert the a fifth CD into the slot 1. The
CD changer attempts to load the fifth
CD, yet aborts the loading procedure.
The system automatically plays the last
(fourth) CD.Ejecting CDs

71 Audio
CD changer* operation

Use

or

to select another CD
from the list.

Wait approx. 3 seconds without chang
-
ing the selection.The CD is changed. The newly selected
CD is played.
Selecting via direct entry of the CD
number 
Press one of the
3
- 
keys.
The CD changer switches to the CD
loaded in the appropriate CD changer
compartment.
Selecting via CD Selection menu 
Press the
Magaz.
soft key.
The CD Selection menu appears. You
see the list of all six compartments.
An entry shows the CD title if the CD con
-
tains corresponding text data.No text displayed with a CD symbol indi
-
cates that the corresponding CD does not
contain any CD text data.An entry shaded out indicates an empty
CD changer compartment.
Use

or

to select a CD.
The system will skip empty CD

changer compartments.
iThe system will skip empty CD changer
compartments.
iThe CD fails to be changed if you select
an empty compartment.


75 Audio
CD changer* operation

Track RandomThe tracks are played in random order
(e.g. track 3, 8, 5 etc.).If several CDs are loaded in the CD
changer, the last track on a CD will be
followed by the first track of the next
CD in the changer.The CDs are changed in their normal
sequence (e.g. CD 1, 2, 3, etc.).

CD RandomAt least 4 tracks on one CD are played
in random order (e.g. track 5, 7, 3, 9)
before the next CD is played.

The CDs are changed in random

order (e.g. CD 4, 1, 5, etc.).
Changing the playback option 
In the CD
changer main menu
( page
69)
press the
Setting
soft
key. The Settings menu is displayed.

The solid circle
indicates which op
-
tion is currently selected.

Press
 or  to select a different
option.

Press
.
The option is activated. A correspond
-
ing display will appear in the status bar
for all options except Normal
sequence
.
An option will remain activated even if
the COMAND is switched OFF and then
ON again.
iThis selection is only possible if at least
two CDs are loaded in the CD
changer.

84 Satellite radio*Satellite radio operationTwo options are available:
Storing using the number keys

Storing using the Presets menu
Storing via number keys 
Press and hold a number key between 3
and
"
for more than 2 seconds.
The currently selected station is stored
in the corresponding preset location.
Storing via Presets menu 
Press the
Presets
soft key.
The Preset list appears.

Use

or

to select a preset loca
-
tion.

Press

for more than 2 seconds.
The currently selected station is stored
in the corresponding preset location.
Resetting Presets menu The
Presets
soft key is active indicated by
its color.

Press the
Presets
soft key again.
All channels in the Preset list are delet
-
ed.

Press the
Service
soft key.
The telephone number of the Sirius
Service Center and the twelve-digit
electronic serial number (ESN) of your
vehicle's receiver appear.
It may be necessary to call the Sirius Ser
-
vice Center if, for example:
you want to cancel the subscription or
to re-subscribe at a later date

you forget to pay the bill

you sell the car to another person
Storing stationsiWhen storing a station out of the cate
-
gory
All
, later selection of this channel
does not lead into the category mode.
Calling the Sirius Service Center

91 Telephone*
Telephone operation
In succession, press the number keys
!
,
3
and
3
.

Press
0
.
The telephone establishes the connec
-
tion, the ringing tone is audible.

Wait until the emergency call center
answers, then describe the emergency.
The PIN protects the telephone against un
-
authorized use. Your PIN is found in the
telephone service provider's documenta
-
tion.Commit your PIN to memory.

Most telephone functions are not available
before entering the PIN.

Press the corresponding number key 3
- "
for each digit.
In case of erroneous entry, you can de
-
lete the last or more digits.
Press the
Delete
soft key as often
as required.

Once all digits have been entered,
press the
OK soft key.
If the input is correct, the telephone
will log itself into the network.
If the input is incorrect, message

Wrong PIN number
will appear briefly.

Re-enter the PIN.
After three incorrect entries, the SIM
card is blocked. Message
SIM
card
blocked
will appear briefly.

The PUK has to be entered.
( Telephone Operation Guide)
The unlock code protects the telephone
against unauthorized use. To activate the
unlock code (
 Telephone Operation
Guide).
Commit your unlock code to memory.

Most telephone functions are not available
before entering the unlock code.
Entering the PIN (only GSM) iThe PIN may be entered on the cell
phone itself (
 Telephone Operation
Guide).
iThe telephone cannot be used before it
is logged-in.Entering the unlock code

94 Telephone*Telephone operationThe ringing tone is audible in the event of
an incoming call. The call screen pops up
on the current display.
If the multifunction display in the instru
-
ment cluster is set to telephone mode, the
call screen also appears in the multifunc
-
tion display.Answering calls On the COMAND control unit
Press
0
.
On the multifunction steering wheel
Press
s
.
In both cases the call is active. Commu
-
nication is conducted via the hands-free
system. The call volume can be adjusted ( page
31).

For other user functions, see

“Active call”
( page
99)
.
Ending or refusing a call On the COMAND control unit 
Press
/
.
On the multifunction steering wheel
Press
t
.
iIf a list is empty, the corresponding soft
key (
, Recvd.#
, Dialed
# or
SMS
) is
without function and appears shaded
out.Answering an incoming call
iThe caller’s number appears only if it is
transmitted.

The caller’s name only appears if the
number and the name are stored in the
phone book
( page
101)
.
iIt is also possible to accept, refuse or
end a call from the cell phone

( Telephone Operation Guide).

104 Telephone*SMS (Mail)SMS messages can be received if your ve
-
hicle is equipped with a telephone and
SMS messaging is available from your car
-
rier.Received messages are saved in the folder
SMS inbox.

Open the Telephone main menu ( page
92)
.

Press the
SMS
soft key.
The folder SMS inbox appears.
The SMS inbox shows the list of received
messages. The list is sorted chronological
-
ly, the last message received is displayed
at the top of the list.The corresponding date and time appears
in the status bar when the selected mes
-
sage has been received.
Use

or

to select another mes
-
sage.
iIncoming new messages are indicated
by the
symbol in the status bar.

Symbol
appears in the status bar if
the SMS memory is full.In addition, a corresponding message
is displayed when the folder is opened.
SMS inboxiIf no SMS messages have been re
-
ceived the
SMS
soft key is without func
-
tion and therefore shaded out.