reset MERCEDES-BENZ SPRINTER 2019 MY19 with Base Radio Operator’s Manual

&
WARNING Risk of accident du eto
object sinthe driver's foot we ll
Object sinthe driver's foot we ll ma yimp ede
pedal tr avel or bloc kadepressed pedal.
This jeopardizes theo perating and road
saf etyoft hevehicle. #
Stow all object sinthevehicle securely
so that they canno tget intot he driver's
fo ot we ll. #
Alwaysi ns tallth ef loor mats securely
and as prescribed in order toensure
th at ther eisa lway ss ufficient room for
th ep edals. #
Do no tuse loose floor mats and do not
place floor mats on topofo ne ano ther. *
NO
TEBatter ydisch arging from using
device sconnec tedtot he diagnostics
connection Using devices at
thed iagnostics connection
drains theb atter y. #
Chec kthe charge leve loft he batter y. #
Ifth ec har geleve lisl ow,char getheb at‐
te ry,e .g. bydriving aconsiderable dis‐
ta nce. Connecting equipment
tothed iagnostics connec‐
tion can lead toemissions monitoring information
being reset, fore xamp le. This ma ylead tothe
ve hicle failing tomee tthe requ irements of the
next emissions inspection du ring them ain
inspection. Note
sonc hanges tothee ngine output
Output inc reases can:
R chang ethe emission values.
R lead tomalfunctions.
R result in consequential damage.
The operating saf etyoft he engine is no tguaran‐
te ed in all situations.
An ytampering wit hthe engine management in
order toinc rease thee ngine output will lead to
th el oss of theN ew Vehicle Limited Warrant yand
ot her warrant yentitlements.
If yo us ellthev ehicle, infor mthe buyer of any
alterations tothev ehicle's engine output. If you
do no tinfor mthe buyer ,this ma yconstitut ea
punishable of fense under nationa llegis lation. Qualifie
dspeciali stwo rkshop
Aq ualified specialis tworks hop has then ecessary
special skills, tools and qualification stocorrectly
car ryout an ynecessar yworkony ourvehicle.
This particular lyapplies tosaf ety-re leva nt wo rks.
Alw aysh ave thef ollowing workon thev ehicle
car ried out at aqualified specialis tworks hop:
R safety-re leva nt wo rks
R service and maintenance work
R repair work
R modifications as well as ins tallation sand con‐
ve rsions
R workon electronic component parts
Mercedes-Benz recommends that youu se an
authorize dMercedes-Ben zCenter fort his pur‐
pose. Ve
hicl eregistration
Mercedes-Ben zmayask its service cen terto
car ryout tech nica linspections on cer tain vehi‐
cles. The quality or saf etyoft hevehicle is
impr ovedasar esult of thei nspection.
Mercedes-Benz can onl yinfor myou aboutv ehicle
ch ecks if it Mercedes-Benz has your registration
data.
In thef ollowing cases your vehicle ma ynotbe
re gis tere dtoy ouyet:
R Youd id no tpurch ase your vehicle at an
authorized specialis tdealer.
R Your vehicle has no tyet been inspected at an
au thorized Mercedes-Benz Center.
It is advisable toregis tery our vehicle wit han
authorized Mercedes-BenzC enter.
Infor mMercedes-Benzass oon as possible about
an yc hang eina ddress or vehicle ownership.
Yo uc an do this, fore xamp le, at an authorized
Mercedes-Ben zCenter. Cor
rect use of thev ehicle
If yo ur emo ve wa rning sticke rs,o ther sm ayfailto
re cognize thed angers. Lea ve warning sticke rs in
position.
Obser vethef ollowing information in particular
when operating thev ehicle:
R Safetyn otes in these Operating Instructions
R Tech nica ldataf or thev ehicle General no
tes23

card contains, in compact
form ,the mos timp or‐
ta nt information abou tyour vehicle e.g. ther out‐
ing of electric cables.
Fu rther information can be found at http://
www.mercedes-benz.de/qr-code. Data
storage Electronic control units
Electronic control unit
sareins talled in your vehi‐
cle. Some of these ar enecessar yfor thes afe
operation of your vehicle, while some assis tyou
when driving (driver assis tance sy stems). In addi‐
tion, your vehicle pr ovides com fort and enter tain‐
men tfunctions, whic harealso made possible by
electronic cont rolu nits.
The elect ronic control units contai ndatam emo‐
ri es whic hcan temp orarily or permanently store
te ch nica linformation abou tthe vehicle's operat‐
ing state, component loads, main tenance requ ire‐
ments and tech nica leventsorm alfunctions.
In general ,this information documents thes tate
of ac omponent part, amodule, asystemort he
sur rounding ssucha s:
R operatin gstatesofs ystemc omponents (e.g.
fl uid le vels, batter ystatus ,tirep ressure)
R status messages concernin gthe vehicle and
its individual components (e.g. number of
wheel revo lutions/speed, deceleration, lateral
acceleration ,displa yoft hefast ened seat
belts)
R malfunctions or defects in impor tant sy stem
components (e.g. lights, brakes)
R information on events leading tovehicle dam‐
age
R system reaction sinspecial drivin gsituations
(e.g. airbag deployment, inter vention of sta‐
bilit ycontrol sy stems)
R ambient conditions (e.g. temp erature, rain
sensor)
In addition toprov iding thea ctual cont rolu nit
function ,this dat aassists them anufacturer in
de tecting and rectifying malfunctions and opti‐
mizing vehicle functions. The majority of this data
is temp orar yand is onl yprocessed in thev ehicle
itself. Onl yasmall portion of thed ataiss tore din
th ee vent or malfunction memo ry.
When your vehicle is serviced, tech nica ldata
from thev ehicle can be read out byservice net‐
wo rkemplo yees (e.g. workshops, manufacturers)
or thirdp arties (e.g. breakdown services). Serv‐ ices include
repair services, maintenanc epro‐
cesses, warrant yclaim sand quality assurance
measures, fore xamp le. The read out is per‐
fo rm ed via thel egally prescribed por tfor the
diagnostics connection in thev ehicle. The
re spectiv eservice networ klocations or thirdp ar‐
ties collect, proces sand use this data. They
document tech nica lstatuses of thev ehicle,
assis tinfinding malfunctions an dimp roving qual‐
ity and ar etransmitted tothem anufacturer ,if
necessar y.Fu rthermore, them anufacturer is sub‐
ject toproduct liability .For this, them anufacturer
re qu ires tech nica ldataf romv ehicles.
Malfunction memories in thev ehicle can be reset
by aservic eoutle tasp artofr epair or mainte‐
nanc ework.
Depending on thes elected equipment, youc an
impor tdatai ntov ehicle con venience and info‐
ta inment function syourself.
This includes, fore xamp le:
R multimedi adatas uchasm usic,films or pho‐
to sf or playbac kinanintegratedm ultimedia
sy stem
R address book dat afor use in connection with
an integrated hands-free sy stem or an inte‐
grated navigation sy stem
R entered navigation destinations
R dataabout theu se of Interne tservices
This dat acan be sa vedl ocall yint hevehicle or it
is located on adevice whic hyou ha veconnected
to thev ehicle (e.g. smartphone, USB flash drive
or MP3 pla yer). If this dat aisstore dint hevehi‐
cle, youc an dele teit at an ytime. This dat ais
sent tothirdp arties onl yatyourrequ est, particu‐
lar lywhen youu se online services in accordance
wit hthe settings that youh ave selected.
Yo uc an stor eorc hangeconvenience settings/
individualization in thev ehicle at an ytime.
Depending on thee quipment, this includes, for
ex ample:
R seat and steering wheel position settings
R suspension and climat econt rols ettings
R Individualization suc hasinterior lighting
If yo ur vehicle is accordingly equipped,y ou can
connec tyour smartphone or ano ther mobile end
device tothev ehicle. Youc an control this by
means of thec ont role lements integrated in the
ve hicle. Images and audio from thes martphone
can be output via them ultimedia sy stem. Cer tain General no
tes25

The windo
wsinthef ront door scan also be oper‐
ated automaticall y. #
Toopen comple tely: briefly press button 1
or 2 beyond thep oint of resis tance.
Au tomatic operation wills tart. #
Toclose comple tely: briefly pull button 1
or 2 beyond thep oint of resis tance.
Au tomatic operation wills tart. #
Tointer rupt automatic operation: briefly
press or pull button 1or2 again.
% If an objec
tbloc ksas ide wind owduring the
automatic closin gprocess, thes ide window
will open again automaticall y.The automatic
re ve rsing function is onl yanaid and is no ta
substitut efor your attentiveness.
% If automatic operation of
thes ide windo ws
does no twork, ther eisnoa nti-entra pment
function.
Au tomatic reve rsing function of thes ide win‐
do ws
If an object bloc ksas ide wind owduring thec los‐
ing process, thes ide windo wwill open again
automaticall y.The automatic reve rsing function is
onl yana id and is no tasubstitut efor your atten‐
tiveness. #
During thec losing process, mak esuret hat no
body parts ar einthe closing area. &
WARNING Risk of becoming trapped
despit ether ebeing reve rsep rotection on
th es ide window
The reve rsef unction does no treact:
R Tosoft, light and thin objects, e.g. fingers
R Over thel ast 00CFin (4 mm) of thec losing
path
R During resetting
R When thes ide windo wisclosed again
manuall yimmediatel yafter automatic
re ve rsing
This means that ther everse function cann ot
pr eve nt someone from becoming trappe din
th ese situations. #
During thec losing process, mak esure
th at no body parts ar einthe closing
area. #
If someone becomes trapped, press the
0062 button toopen thes ide window
again. Ve
ntilating thev ehicle befor estarting ajour‐
ne y( conve nience opening) &
WARNING Risk of entrapment when
opening asidew indow
Whe nopening asidew indo w, parts of the
body could be dr awninorb ecome trapped
between thes ide windo wand windo wframe. #
When opening, mak esuret hat nobody
is touchin gthe side windo w. #
Release theb utton immediately if some‐
body becomes trapped. Yo
uc an ventilat ethe vehicle befor eyou start
driving.
To do this, thek eyis used tocar ryout thef ollow‐
ing function ssimultaneously:
R unloc kthe vehicle
R open thes ide windo ws
The "con venience opening "function can only be
ope ratedu sing thek ey.T he keym ustbeinc lose
pr ox imit ytot he driver's or front-passenge rdoor. #
Press and hold the0036 button on thek ey.
The following function sareper form ed:
R thev ehicle is unloc ked
R thes ide windo wsareo pened #
Tointer rupt convenience opening: release
the 0036 button. Closing side windo
wsfrom theo utside (con‐
ve nience closing) &
WARNING Risk of entrapment caused by
inadver tent con venience closing
Whe nthe con venience closing featur eis
operating, parts of theb ody could become
trapped in thec losing area of thes ide win‐
do ws. #
Obser vethec omple teclosing proce‐
du re when using con venience closing. #
Whe nclosing ,makes uret hat no body
parts ar einthe closing area. #
Press and hold the0037 button on thek ey.
The following function sareper form ed:
R The vehicle is loc ked
R The side windo wsarec losed 54
Opening and closing

#
Adjus tthe seat int othe desired position. #
Press memor ybutton Mtogether wit hone of
th ep rese tp osition buttons 1,2or3.
An acou stic signal sounds .The settings are
st ored. #
Tocall up: press and hold ther ele vant preset
position button 1,2or3u ntilthef ront seat is
in thes tore dp osition. Ro
tating thef ront seats &
WARNING Risk of inju ryor deat hifthe
driver's seat and front-passenge rseat
ar en otengaged
If th ed rive r's and front-passenger seats are
no te ngaged in thed irection of tr avelduring
th et rip, ther estraint sy stems cann otoffer
pr otection as intended. #
Enga gethed rive r's and front-passenger
seat in thed irection of tr avel befor ethe
engine is star ted. &
WARNING Risk of inju ryfrom adju sting
th ev ehicle settings while thev ehicle is in
motion
Yo uc oul dlose control of thev ehicle in the
fo llowing situations:
R ifyo ua djus tthe driver's seat, theh ead
re stra int ,the steering wheel or them irror
while thev ehicle is in motion
R ifyo uf asteny our seat belt whilet hevehi‐
cle is in motion #
Befor estarti ngthee ngine: adjus tthe
driver's seat, theh ead restra int ,the st
eering wheel or them irro ra nd fast en
yo ur seat belt. Yo
uc an rotate thed rive r's and front-passenger
seat 50 °and 180°.T he seats engag ebothin
and opposit etothe direction of tra velasw ell as
at 50 °totheexit. #
Ensur ethat thep arking brak eisapplied and
th eb rake leve risf olded down wardsasf ar as
it will go (/ page133). #
Adjus tthe steering wheel in suc hawaythat
th er eiss ufficient free space torotate and
adjus tthe driver's seat (/ page71). #
Slide thef ront-passen gers eat forw ardb efore
ro tating it (/ page 59). #
Torotat ethe sea t:push le ver1towa rds
th ev ehicle center and rotat ethe seat slightly
in wa rds.
The rotatio nd eviceisu nlocked. #
Release le ver1again. #
Rotate thes eat byaround 50 °outwa rdsor
in wa rdsi ntot he requ ired position. Seat
sand stow age 65

Switching
ther ear windo wwiperon/off 1
00E2 Single wipe/wash
2 00C5 Intermittent wiping #
Single wipe: press button1tothep oint of
re sis tance. #
Wiping with washer fluid: press button 1
be yond thep oint of resis tan ce. #
Toswitc hintermittent wiping on or off:
press button 2.
If th er ear windo wwiper is swit ched on, the
00C5 symbol will appearont he Instrument
Displa y. Re
placing the windshiel dwiper blades &
WARNING Risk of becoming trapped if
th ew indshield wiper sareswitched on
while wiper blades ar ebeing replaced
If th ew indshield wiper sbegin tomo vewhile
yo ua rechanging thew iper blades, youc an
be trapped bythew iper arm. #
Alwayss witc hoffthew indshield wipers
and thei gnition befor echanging the
wiper blades. &
WARNING Risk of inju ryfrom using the
windshield wiper swhile thee ngine hood
is open
When thee ngine hood is open and thew ind‐
shield wiper saresetinm otion, youc an be
trapped bythew iper linkage. #
Alwayss witc hoffthew indshield wipers
and ignition befor eopening thee ngine
hood. %
If
th ew iper blades ar eworno ut, they will not
wipe thew indshield proper ly.R eplace the
wiper blades twic eayear,prefera blyin
spring and fall. #
Fold wiper arm 3away from thew indshield. #
Hold wiper arm 3and tur nthe wiper blade
aw ay from wiper arm 3inthed irection of
th ea rrow asfarasitw illg o. #
Slide catch 2upwards in thed irection of the
ar row until it engages. #
Fold bac kthe wiper blade ont othe wiper arm. #
Remo vewiper blade 1from wiper arm. #
Inser tnew wa sher blade 1intheh older on
wiper arm 3.
When doing so, take intoa ccount thed iffe re nt
lengths of thew iper blades:
R Driver's side: long wiper blade
R Front-passenger side: shor twiper blade #
Slide catch 2down wardsu ntil it engages. #
Fold wiper arm 3bac kontot he windshield. Re
placing the windshiel dwiper blades (WET
WIPER SYSTEM) &
WARNING Risk of becoming trapped if
th ew indshield wiper sareswitched on
while wiper blades ar ebeing replaced
If th ew indshield wiper sbegin tomo vewhile
yo ua rechanging thew iper blades, youc an
be trapped bythew iper arm. #
Alwayss witc hoffthew indshield wipers
and thei gnition befor echanging the
wiper blades. Light and vision
89

&
WARNING Risk of inju ryfrom using the
windshield wiper swhile thee ngine hood
is open
When thee ngine hood is open and thew ind‐
shield wiper saresetinm otion, youc an be
trapped bythew iper linkage. #
Alwayss witc hoffthew indshield wipers
and ignition befor eopening thee ngine
hood. %
If
th ew iper blades ar eworno ut, they will not
wipe thew indshield proper ly.R eplace the
wiper blades twic eayear,prefera blyin
spring and fall. #
Fold wiper arm 3away from thew indshield. #
Hold wiper arm 3and tur nthe wiper blade
aw ay from wiper arm 3inthed irection of
th ea rrow asfarasitw illg o. #
Slide catch 2upwards in thed irection of the
ar row until it engages. #
Remo vewiper blade 1from thew iper ar min
th ed irection of ar row4. #
Carefull yremo vehose 5from thew iper
blade. #
Attach hose 5tothen ew wiper blade. #
Inser tnew wa sher blade 1intheh older on
wiper arm 3.
When doing so, take intoa ccount thed iffe re nt
lengths of thew iper blades:
R Driver's side: long wiper blade
R front-passenger side: shor twiper blade #
Slide catch 2down wardsu ntil it engages. #
Fold bac kthe wiper blade ont othe wiper arm. #
Fold wiper arm 3bac kontot he windshield. Re
placing the rear windo wwiperblade #
Fold wiper arm 3away from ther ear win‐
do w. #
Press bo thretainin gclips 2inthed irection
of thea rrow and swivel thew iper blade away
from thew iper arm. #
Pull wiper blade 1upwards out of theh older
on wiper arm 3. #
Inser tnew wa sher blade 1intheh older on
wiper arm 3. #
Push ne wwiper blade 1ontow iper arm 3
until ther etainin gclips engage. #
Fold wiper arm 3bac kontot he rear win‐
do w. Mir
rors Operating
theo utside mir rors &
WARNING Risk of inju ryfrom adju sting
th ev ehicle settings while thev ehicle is in
motion
Yo uc oul dlose control of thev ehicle in the
fo llowing situations:
R ifyo ua djus tthe driver's seat, theh ead
re stra int ,the steering wheel or them irror
while thev ehicle is in motion
R ifyo uf asteny our seat belt whilet hevehi‐
cle is in motion #
Befor estarti ngthee ngine: adjus tthe
driver's seat, theh ead restra int ,the 90
Light and vision

R
Lane markings solid and thin: Lane Keeping
Assis tswitched on, no tready toissue warn‐
ings
R Lane markings solid and thick: Lane Keeping
Assis tready toissue warnings Calling up displa
yson thet ripm enu On-boar
dcomputer:
4 Trip #
Selec tthe desired displa yand confirm.
The following displa ysarea vailable on thet rip
menu:
R Standar ddisplay
R Rangea nd cur rent fue lconsu mption
Wi th cer tain engines arecuperation displa yis
also shown. If only asmall amount of fue lis
lef tint he fuel tank ,av ehicle being refueled
appear sins tead of thea ppr oximat erange.
R ECOd ispl ay ( /pag e113 )
R Trip computer:
- FromS tart
- FromR eset
R Digital speedom eter Instrument Displa
ywithc olor display
St andar ddispla y(example)
1 Trip dis tance
2 Totald ista nce Instrument Displa
ywithb lacka nd whit edisplay
St andar ddispla y(example)
1 Trip dis tance
2 Totald ista nce Instrument Displa
ywithc olo rdisplay
Tr ip computer (e xamp le)
1 Distance co vered( from start/ from reset)
2 Driving time (from start/from reset)
3 Averag espeed (from start/from reset)
4 Averag efuel consum ption (from start/from
re set) Instrument Displa
ywithb lacka nd whit edisplay
Tr ip computer (e xamp le)
1 Distance co vered( from start/from reset)
2 Driving time (from start/from reset)
3 Averag espeed (from start/from reset)
4 Averag efuel consum ption (from start/from
re set) 16 2
Instrument Displa yand on-boar dcomputer

Re
setting values on theo n-boa rdcompu ter
trip menu On-board computer:
4 Trip
% The spelling of
thed ispla yedm ain menu may
dif fer. Therefore, pa yattention tothem enu
ove rviewf orthei nstrument display
(/ page159).
Yo uc an rese tthe values of thef ollowing func‐
tions:
R Trip Odometer:
- Reset Trip Odometer?
R Trip computer:
- FromS tart
- FromR eset
R ECOd isplay #
Selec tthe function that is tobe rese ta nd
confir mthis selection. #
Confir mtheReset Values? promptwith Yes. Calling up settings on
theo n-boa rdcompu ter On-boar
dcomputer:
4 Settings
The following ent ries can be se tonthe Settings
menu:
R DriveAssist
- Switching ESP(ESP) on and off
- Switching Akt. Spurhalte-Assistent (Active
Lane Keeping Assist) on and off
- Switching Spurhalte-Assistent (Lane
Ke eping Assist) on and off
- Switching Aktiver Brems-Assistent (Active
Brak eAssist) on and off
- Switching Totwinkel-Assistent (Blind Spot
Assist) on and off
- Switching Attention Assist (Attention
Assist) on and off
R Light
- Switching Tagfahrlicht (Daytimerunning
lights )ona nd off
- Switching Leuchtzeitinnen (Illumination
pe riod inside) on and off
- Switching Leuchtzeit außen (Illumination
period outside) on and off -
Switching Auffindbeleuchtung (Locator
lighting) on and off
- Setting Instrument lighting
R Vehicle
- Setting Winterreifen-Limit (Winter tires
limit)
- Switching Akust.Schließen (Acoustic
locking) on and off
- Switching Autom. Verriegelung (Autom.
locking) on and off
- Switching Ruhezustand (Standby) on and
off
- Switching Regensensor (Rainsensor) on
and off
R Setting Heating
R Displa yand Operation
- Selecting Sprache (Language)
- Setting Uhrzeit
- Setting Datum
- Setting Einheiten
- Switching pe rmanent Display DE VLevel
on and off
- Operation: Swit chAkust. Bedienrückmeld.
(Acou stic operational feedback) on and
of fa nd set Touch-Control-Empfindl.
(Touch-Cont rols ensitivity)
R Factory Settings:R estoring settings #
Select an entr yand confir mthe selection. #
Mak ethe necessar ychanges. Instrument Displa
yand on-boar dcomputer 16 3

Overvie
wand operation Overvie
wofthe multi media sy stem 1
Cont rolk nob
Tu rn:a djusts thev olume
Press brief ly:s witches
sound off
Press and hold: switches
th em ultimedia sy stem
on/o ff
If th em edia source is
switched on: pause or play‐
back
2 Three-line display
3 Control knob
Turn:o pens thes tatio nor
media list
Mar ksthen extorp revious
menu entry
Press brief ly:c alls up the
st atio nlistort rack list,
selects amenue ntry or
accepts acall
4 Back
Press brief ly:m ove supo ne
menu or folder le vel Press and hold: calls up
the
main menu fort he applica‐
tion
5 USB-Cp ort
6 Press brief ly:n exts tatio nor
skips forw ards atrack
Press and hold: station
sear chfunction forw ards or
fast forw ard
7 Press brief ly:p reviou ssta‐
tio nors kips bac katrack
Press and hold: station
sear chfunction backwards
or fast rewind
8 Press brief ly:c alls up sys‐
te ms ettings
Press and hold: call sup
ra dio text or ID3 tag
9 Press brief ly:c alls up the
te lephone, acce ptsore nds
ac all
Press and hold: calls up the
cal llist A
Calls up US Bmode,iPod ®
mode or Blue tooth®
audio
mode
Re quiremen t:them edia
source is connected with
th em ultimedia sy stem.
B Press brief ly:c alls up radio
in theo rder FM -DAB -AM
(if DA Bisa vailable) or FM -
AM
Press and hold: updates the
DA Bs tatio nlandscape (if
DA Bisa vailable)
C Press brief ly:c alls up sta‐
tio np resets
Press and hold: sa vesas ta‐
tio nint he open statio npre‐
sets
Alternative: wit hthe station
presets open press and
hold 3
% Note
for5:only us eaUSB-C toLightning
cable certified byApple ®
to connect an
iPod ®
. Ac
tivating/deactivatin gthe multimedi asys‐
tem #
Press and hold thel eftc ont rolk no b.
Depending on its status them ultimedia sys‐
te misa ctivated or deactivated. MB audio sy
stem 167

Ad
justin gthe volume #
Toincrease volume: turnthe volume control
clockwise. #
Todec rease volume: turnthe volume con‐
trol coun ter-clockwise. #
Tomute: pressthev olume control. Sy
stem settings Au
dio settings Setting the sound
Multimedia sy
stem:
4 SETUP 5
Audio settings 5
Sound
Equalizer #
Select Bass,Middle orTreble . #
Chang ethe settings.
Balance and fader #
Select Balance orFader. #
Chang ethe settings.
Re setting audio settings
Multimedia sy stem:
4 SETUP 5
Audio settings #
Select Reset Audio Settings. #
Confir mwithYES.
The audio settings ar ereset. Setting
thet imeformat Multimedia sy
stem:
4 SETUP 5
Clock #
Select am/pm or24h. Re
setting to factorysettings Multimedi
asystem:
4 SETUP #
Select Factory settings. #
Confir mthe prom ptwith Yes.
The settings ar erese ttot hefactor ysettings. Showing the softwar
eversion Multimedia sy
stem:
4 SETUP #
Select Software Version: .
The cur rent softwar eversion is displa yed. Ra
dio Setting the frequency band
Multimedia sy
stem:
4 002A #
Press the002A button repeatedl yuntil the
desired transmission rang eiss et.
The transmissio nrang echanges in this order :FM
-D AB -AM.
% The
DABtransmission rang eisn otavailable
in all countries. Selecting
aradio station Multimedi
asystem:
4 002A
Setting astatio nusingthe frequency #
Press the0055 or0054 button tochang ethe
frequency.
% Press brief
ly:then extorp reviou sstatio nis
set.
Press and hold: scrollsstep-b y-step thro ugh
th ef requ encies.
Setting astatio nfromt hestation list #
Press or tur nthe right-han dside control
knob.
The statio nlistiss hown. #
Select astation.
The statio niss et.
Selecting stations via thes tatio npresets #
Call up thes tatio np resets (/ page167). #
Selec tastation.
The statio niss et. Saving
astatio nasa favo rite Re
quirements:
R DABorFMiss etas thet ransmission range
(/ page 168).
Multimedi asystem:
4 002A #
Setas tation #
Pres sthe 004B button.
The statio npresets ar eshown. #
Select aposition ,then press and hold 004B
or ther ight cont rolk no b.
The statio nselec tediss aved. 16 8
MB audios ystem