lock MERCEDES-BENZ SPRINTER 2020 MY20 with 7” screen

If
yo uh ave tocar ryout an yworkint he engine
compartment, touc ho nlyt he following compo‐
nents:
R Hood
R Engine oil filler openin gcap
R Washer fluid reser voir cap
R Coolant expansion reser voir cap &
WARNING Danger of bu rnsw hen open‐
ing theh ood
If yo uo pen theh ood when thee ngine has
ove rheated or during afireint he engine com‐
partment, youc oul dc om eintoc ontact wi th
ho tg ases or other escaping operating fluids. #
Befor eopening theh ood, allo wthe
engine tocool down. #
Inthee vent of afireint he engine com‐
partment, keep theh ood closed and call
th ef ires ervice. &
WARNING Risk of scalding from hot
coolant
The engine cooling sy stem is pressurized,
particular lywhen thee ngine is warm.Ify ou
open thec ap, youc oul dbes calded byhot
coolant spr aying out. #
Letthe engine cool down befor eopen‐
ing thec ap. #
When opening thec ap, wear pr otective
gl ove sand saf etyg lasses. #
Open thec ap slowl ytorelease pres‐
sure. Allo
wthe engine and thee ngine cooling sy stem
to cool down befor echecking thec oolant le velor
re filling coolant.
* NO
TEPaint wo rkdamag eduetocoolant If coolant
getsonp ainted sur faces, thep aint‐
wo rkcan be damaged. #
Addc oolant carefully. #
Remo vespilledc oolant. Checking
thec oolant le vel Example: coolant
expansion reser voir #
Park thev ehicle on an even sur face. #
Ope nthe hood (/ page214). #
Slowly tur ncoolant expansion reser voir cap
1 half aturnc oun ter-clockwise and allow
exc ess pressur etoescape. #
Turn coolant expansion reser voir cap 1fur‐
th er and remo veit. #
Chec kthe coolant le vel.
Ther eise nough coolan tincoolan texpansion
re ser voir if thec oolant reaches theM AX
mar k.
Ad ding coolant #
Refill th ec oolant totheM AX mar konthe
coolant expansion reser voir.
Onl yuse coolan tappr oved byMercedes-Benzto
avo id damagin gthe engine cooling sy stem. #
Replace coolant expansion reser voir cap 1
and tigh tenina clockwise direction. #
Startt he engine. #
Aftera pproxima tely five minutes, switc hoff
th ee ngine again and allo wittocool down. #
Che ckthec oolant le vela ga in and add coolant
if necessar y.
% Obser
veadditional coolant information
(/ page283). Main
tenance and care 219

Obser
vethea dditional following point sduring
st artin gassistance:
R Startin gassis tance ma yonly be pr ovided
using batteries wit hanominal voltag eof12V
R The vehicles mus tnot to uche acho ther
R Vehicles with agasoline engine: only per‐
fo rm startin gassis tance when thee ngine and
ex haus tsyst em ar ecold #
Vehicles with abatter ymain switch: check
whe ther theb atter ymain switc hisinserted
( / pag e120) #
Secur ethe vehicle using thep arking brake. #
Vehicles with automatic transmission:
shif tthe transmission toposition 005D. #
Switc hoffthei gnition and all electrical con‐
sumers. #
Open theh ood (/ page214). Example
:jump-s tart connection
% Right-hand driv
evehicle: thej ump-s tart
connection ma ybeonthe opposit eside. #
Remo vethec ove rfromt he positiv eterminal
on thed onor batter y. #
First,c onnec tthe positiv eterminal clam pof
th ej umper cables/charging cables tothe
positiv eterminal of theo ther vehicle's bat‐
te ry. #
With positiv eterminal clamp 2ofthe
jumper cable/charging cable ,slide ther ed
pr otectiv ecap on jump-s tarting connection
1 bac kwithac lockwise turn. #
Connect theo ther positiv eterminal clam pto
th ep ositiv eterminal of jump-s tart connection
1. #
During starting assistance: star tt he engine
of thed onor vehicle and le titrun at idle
speed. #
Firs t, connect then egativ eterminal clam pof
th ej umper cable/charging cable tothen ega‐
tiv ep ole of thed onor batter y. #
Connec tthe other negativ eterminal clam pof
th ej umper cable/charging cable toag round
po int on your ow nv ehicle (a bar emetal part
in thee ngine compartment). #
During starting assistance: star tt he engine
on your ow nv ehicle. #
When charging: star tt he chargin gprocess. #
During starting assistance: lett he engine
ru nf or afew minutes. #
During starting assistance: beforediscon‐
necting thej umper cable, switc honanelec‐
trical consumer on your ow nv ehicle, e.g. the
re ar wind owheater or lighting.
When thes tartin ga ssis tance/charging proces sis
comple te: #
Remo vethej umper cables/charging cables
in reve rseo rder:first then egativ eclam pfrom
th eg round point in thee ngine compartment,
th en then egativ eclam pfromt he donor bat‐
te ry.T he nt he positiv eclam pfromt he posi‐
tiv et erminal of jump-s tart connection 1,
th en thep ositiv eclam poft he donor batter y.
The redp rotectiv ecap springs bac ktoits ini‐
tial position when positiv eterminal clamp 2
is disconnected from jump-s tarting connec‐
tion 1.
Yo uc an obtain fur ther information at aqualified
specialis tworks hop. Installing/removing
thef loor co vering (vehi‐
cles with rear wheel drive) &
WARNING Risk of accident du eto
object sinthe driver's foot we ll
Object sinthe driver's foot we ll ma yimp ede
pedal tr avel or bloc kadepressed pedal.
This jeopardizes theo perating and road
saf etyoft hevehicle. #
Stow all object sinthevehicle securely
so that they canno tget intot he driver's
fo ot we ll. Breakdown assis
tance 233

Pe
rm issible towing me thods Bo
th axle sont he
gr ound Fr
ont axle raised Re
ar axle raised
Ve hicles wit hauto‐
matic transmission and
re ar-wheel drive Ye
s, no fur ther than
31 miles (50 km) at
31 mp h(50 km/h) Ye
s, no fur ther than
31 miles (50 km) at
31 mp h(50 km/h) Ye
s, if thes teering
wheel is fixe dint he
center position wit ha
st eering wheel lock
Ve hicles wit hall-wheel
drive Ye
s, no fur ther than
31 miles (50 km) at
31 mp h(50 km/h) No
NoTo
toww ithar aisedaxle: towing should be per‐
fo rm ed byatow ing compan y. To
wing away thev ehicle wit hbotha xleson
th eg round #
Obser vethen otes on permissible towing
me thods (/ page236). #
Mak esuret hat theb atter yisc onnected and
ch arge d.
When theb atter yisd ischar ged, thef ollowing sit‐
uations occur:
R The engine canno tbestarted.
R It is no tpossible torelease or appl ythe elec‐
tric parking brake.
R Vehicles with automatic transmission: the
automatic transmission canno tbeshiftedto
position 005Cor005D.
* NO
TEDama gedue to to wing away at
exc essivel yhigh speeds or overlong dis‐
ta nces The driv
etra in could be damaged when towing
at exc essively high speeds or over long dis‐
ta nces. #
Atow ing speed of 30 mph(50 km/h)
mus tnotbe exc eeded. #
Atow ing distanc eof30miles (50 km)
mus tnotbe exc eeded. %
Ve
hicles with automatic transmission
and rear wheel drive: ifth er eisam alfunc‐
tion, thea utomatic transmission ma ybe
loc kedinp osition 005D. If
th ea utomatic transmission cann otbe shif‐
te dtop osition 005C,transpor tthe vehicle
(/ page239). Atow ing vehicle wit hlifting
equipment is requ ired forv ehicle transport. &
WARNING Risk of accident whe ntow ing
av ehicle whic histoo heavy
If th ev ehicle being tow- star tedort owed
aw ay is heavier than thep ermissible gross
mass of your vehicle, thef ollowing situations
can occur:
R The towing eyem aybecome de tach ed.
R The vehicle/trailer combination may
swer veoreve noverturn. #
If ano ther vehicle is tow- star tedor
to we da way,its weight mus tnotexc eed
th ep ermissible gross mass of your own
ve hicle. If
av ehicle needs tobe towe dort ow st arted, its
we ight should no tbegreater that thep ermissible
gross mass of thet ow ing vehicle. #
Information on thev ehicle's permissible gross
mass can be found on thev ehicle identifica‐
tion plat e(/pag e274). #
Vehicles with automatic transmission: do
no to pen thed rive r's or co-driver door ,asthe
automatic transmission will automatically
shif ttop osition 005D. #
Installth et ow ing eye( /pag e240). #
Secur ethe towing device. Breakdown assis
tance 237

*
NO
TEDama gedue toincor rect connec‐
tion of thet ow bar #
Onlyconnec tthe towr ope or towb arto
th et ow ing eyes. %
Yo
uc an also secur ethe towing devic etothe
trailer hitch.
* NO
TEDama geand risk of accident when
to wing wit hatow ro pe Ther
eisar isk of an accident if youdon ot
obse rves afet ya nd pr otectiv emeasures when
to wing using atow ro pe.
Obser vethef ollowing points when towing
wit hat ow ro pe: #
Secur ethe towr ope on thes ame side
on bo thvehicles, if possible. #
Mak esuret he towr ope does not
exc eed thel egally prescribed length. #
Mar kthe towr ope in them iddle, e.g.
wit haw hitec loth (30 x30c m). This
makes other road user sawarethat a
ve hicle is being towe d. #
Obser vetheb rake lamps of thet ow ing
ve hicle while driving. Alw aysm aintain a
dis tance that ensures thet ow ro pe does
no ts ag. #
Do no tuse steel cables or chains to tow
yo ur vehicle. Otherwise, youc oul dd am‐
ag et he vehicle. #
Deactivat eautomatic locking (/ page50). #
Do no tactivat ethe HOLD function. #
Deactivat ethe tow- aw ay alar m(/pag e62). #
Deactivat eActiv eBrake Assi st (/ pag e150). #
Vehicles with automatic transmission:
shif tthe automatic transmission toposition
005C. #
Release thep arking brake. &
WARNING Risk of accident du etolimi‐
te ds afet y-re lated function sduring the
to wing process
Saf ety-re lated function sarelimited or no lon‐
ge ra vailable in thef ollowing situations:
R thei gnition is switched off.
R theb rake system or po wersteering sys‐
te mism alfunctioning.
R thee nergy suppl yorthe on-boar delectri‐
cal sy stem is malfunctioning.
When your vehicle is then towe da way,signifi‐
cantly mor eeffor tm aybe requ ired tosteer
and brak ethan is normally required. #
Use atow bar. #
Mak esuret hat thes teering wheel can
mo vefreely ,befor etow ing thev ehicle
aw ay. *
NO
TEDama gedue toexc essiv etractive
po wer If
yo up ullaway sharpl y,thet ractiv epower
ma ybet oo high and thev ehicles could be
damaged. #
Pull away slowl yand smoo thly. To
wing avehicle wit hthe front or rear axle
ra ised *
NO
TEDama gewhen thei gnition is
switched on If
yo ul eave thei gnition switched on when
to wing thev ehicle wit hthe front or rear axle
ra ised, ESP ®
actuation can damag ethe brake
sy stem. #
The ignition mus tbeswitched off. *
NO
TEDama gedue toincor rect remo val
or ins tallation of thep ropeller shafts When ins
talling thep ropeller shafts, they can
be damaged if youdon otuse ne wscrew s.
Alw aysu se ne wscrew sw hen ins talling the
propeller shafts.
Onl yhave thep ropeller shafts ins talled or
re mo vedbyq ualified, skilled personnel. 238
Breakd owna ssis tance

Installing/removing
thet ow ing eye Ins
talling and removing thef ront towing eye #
Toinstall thef ront towing eye: press the
to poft he co vera nd remo vethec over. #
Screw intowing eye1clockwise tothes top
and tighten. #
Toremo vethef ront towing eye: unsc rew
to wing eye1counter-clockwise. #
Inser tthe co verw itht he tabs at thet op and
push in at theb otto muntilthec ove rengages. Re
ar towing eye( vehicles wit hpassenger vehicle
appr oval)
% Re
ar towing eye2is permanentl yattached
to thev ehicle.
* NO
TEDama getothev ehicle due to
incor rect use of thet ow ing eye When
atow ing eyeisu sedtoreco verav ehi‐
cle, thev ehicle ma ybedamaged in thep roc‐
ess. #
Onlyusethet ow ing eyetot ow aw ayor
to ws tartthe vehicle. To
ws tarting vehicl e(eme rgency engine start) Ve
hicles with automatic transmission
* NO
TEDama getothea utomatic trans‐
mission due to towstarting The automatic transmissio
nmaybe damaged
in thep rocess of tows tartin gv ehicles with
automatic transmission. #
Vehicles wit hautomatic transmission
mus tnotbe tows tarted. #
Do no ttow st artv ehicles wit hautomatic
transmission. Electrical fuses
Note
sone lectrical fuses &
WARNING Risk of accident and injury
du etoo verloaded lines
If yo um anipulat eorbridg eaf aulty fuse or if
yo ur eplace it wit hafuse wit hahigher
amperage, thee lectric line could be overloa‐
ded.
This could result in afire. #
Alwa ys replace faulty fuse swiths peci‐
fi ed ne wfuses containing thec orrect
amperage. *
NO
TEDama gedue toincor rect fuses Electrica
lcomponents or sy stems could be
damaged byincor rect fuses. #
Only use fuses whi chhave been
appr ovedbyM ercedes-Benza nd which
ha ve thec orrect fus erating. Th
ee lectrica lfus es in your vehicle switc hoff
defectiv ecircuits. If afuse blo ws,allth ec ompo‐
nent sont he circuit and their functions will cease
to operate.
Blown fuses mus tbereplaced wit hfuses of an
equivalent specification ,whic hyou can de ter‐
mine bythec olor and fuse rating .The fuse allo‐
cation charta nd fur ther information on thee lec‐
tric fuses and relays can be found in the" Fuse
allocation chart" supplement. 240
Breakdown assis tance

*
NO
TEDama geor malfunction scaused by
moisture Moistur
emaycause dama getothee lectrical
sy stem or cause it tomalfunction. #
When thef use bo xisopen, mak esure
th at no moistur ecan enter thef use box. #
When closing thef use box, mak esure
th at thes eal of thel id is positioned cor‐
re ctly on thef use box. If
th en ew fuse whic hhas been inser teda lso
blo ws,have thec ause traced and rectified at a
qu alified specialis tworks hop.
Mak esureoft hefollowing befor ereplacing a
fuse:
R thev ehicle is secured suc hthat it does not
ro llaw ay
R all electrical consume rsares wit ched off
R thei gnition is switched off
The fuses ar elocated in various fuse bo xes:
R fuse bo xinthe front-passenger foot we ll
(/ page241 )
R fuse bo xinthe seat base of thed rive r's seat
(/ page241 ) Opening
thef useb oxinthes eat base of the
dr iver's seat #
Toopen: press down and unclip fasteners 1
on thec over. #
Remo vethec ove r. #
Toclose: pressthec over firm ly in tothes eat
base until fasteners 1clip in. Opening and closing
thef useb oxinthec o-
driver's foot we ll Opening
thef useb ox #
Unlocking andremoving thes towa ge com‐
partment co verint he co-driver's foot we ll
(/ page242). Example
:vehicle tool kit insert #
Liftthe inser tatmarke dp ositions 1. #
Pull thei nser tout of clips 2.
Closing thef useb ox #
Slide thei nser tint oc lips 2. #
Close thei nser tbyp ressing on mar kedp osi‐
tions 1. #
Put on thes towa ge compartment co verint he
co-d rive r's foot we ll and loc kit(/pag e242). Ve
hicl etool kit Information on
thev ehicle tool kit The
vehicle tool kit is located in thes towa ge com‐
partment in thef ootwell on thef ront-passenger
side (/ page242).
The vehicle tool kit contains:
R atow ing eye
R ascrew driver wit hTorx, Phillips and slotted
bits
The vehicle tool kit ma yalso contain thef ollow‐
ing, fore xamp le:
R an open-en dwrench
R awheel wrench Breakd
owna ssis tance 241

Un
locking and removing the stowage com‐
pa rtmen tcover #
Remo vether ubber mat from thef ront-
passenger foot we ll. #
Tounlo ck:turnthe quick- re lease fastener 1
counter-clockwise toposition 0047. #
Slightly raise and pull out thec over.
Inserting and locking thec over #
Slide in thec over and press it down wards. #
Press down theq uick-re lease fastener 1
until it engages. #
Tolock: turnthe quick- re lease fastener 1
clockwise toposition 0048. Re
moving the vehicl etool kit Example:
vehicle tool kit insert #
Raise thei nser tatm arke dp oints 1. #
Pull thei nser tout of clips 2. St
oring thev ehicle tool kit #
Slide thei nser tint oc lips 2. #
Close thei nser tbyp ressing on mar kedp oints
1. Hydraulic jack
Information on
theh ydraulic jack The
hydraulic jac kislocated in side compartment
1 abo vethec o-driver door step.
The jac khasam aximum weight of 16.5 lbs
(7.5 kg)d epending on thev ehicle's equipment.
Yo uw illfind them aximum load capacity of the
jac kstatedont he adhesiv elabel attached tothe
jac k.Ifth er eisam alfunction, please contact a
qu alified specialis tworks hop.
Jac km aintenance:
R Cleana nd grease all moving parts af teru se.
R Extend and retract thep isto ns ful lyeve rysix
months. 242
Breakdown assis tance

Only use
them iddle roda nd thep um pleve rrod
wit hthe larges tdiame terf or thej ackasa lug
wrenc hextension. Only inse rtthem iddle rodon
th el ug wrench, and alw aysasf ar as it will go.
Otherwise, ther ods could bend and defor mso
muc hthat they can no longer be use daspump
le ve rs fort he jac k. #
Toprepar ethe hydrauli cjack: insertthe
th irdr od of pum plever 1fort he jac kinto
th el ug wrenc hextension. #
Close pressur erelease scr ew3. #
Todo this, use thef lattened sectio nonpump
le ver 1totur np ressur erelease scr ew3
clockwise tothes top.
% Do no
tturnp ressur erelease scr ew3 more
th an one or tw ofull turns .Hydraulic fluid
coul dotherwise escape. #
Inser tpum plever 1withthe larges trod into
th er eces sont he jac kand secur ebyturning
it clo ckwise. #
Place thej ackv erticall ybeneat hthe jac ksup‐
por tpoints described belo w. Jac
ksuppor tpoint, front axle Jac
ksuppor tpoint, rear axle (e xamp le:chassis
up to3.5 t) Jack
suppor tpoint, rear axle (e xamp le: Cargo
Va na nd Passenger Vanu pto4 .0 t) Wheels and tires
265

Jac
ksuppor tpoint, rear axle (vehicles 5. 0t) #
Place thej ackb eneat hthe jac ksupport
point. #
Vehicles with all-wheel drive: turnjack
spindle 2counter-clockwise as farasitw ill
go. #
Raise thev ehicle until thet ireisr aised amax‐
imum of 1.2in(3c m) offthe ground. #
Loosen and remo vethew heel (/ page266). Re
moving awheel Re
quirements:
R The vehicle is raised (/ page264).
When changing awheel, avoid applying any
fo rc etot he brak ediscs since this could
impair thel eve lofc omfort when braking.
* NO
TEDama getothre adin gfromd irton
wheel bolts #
Do no tplace wheel bolt sinsandorona
dirty sur face. #
Unscr ewthew heel bolts or nuts wit hthe
whee lnut wrench. #
On front wheels wit hwheel nuts, remo vethe
wheel nut co ver. #
Remo vethew heel. Installing
anew wheel Re
quirements:
R The wheel is remo ved( /pag e266). &
WARNING Risk of accident from losing a
wheel
Oiled, greased or damaged wheel bolt/wheel
nut thre ads or wheel hub/wheel mounting
bolt thre ads can cause thew heel bolts/wheel
nuts tocome loose.
As aresult, youc oul dlose awheel while driv‐
ing. #
Nevero il or grease thet hreads. #
Inthee vent of damag etothethre ads,
con tact aq ualified specialis tworks hop
immediatel y. #
Have thed amaged wheel bolts or dam‐
aged hub thre ads replaced. #
Do no tcontinue driving. &
WARNING Risk of inju ryfrom tightening
whee lbolts and nuts
If yo ut ighten thew heel bolts or wheel nuts
when thev ehicle is raised, thej ackc ould tip. #
Onlytighten wheel bolts or wheel nuts
when thev ehicle is on theg round. #
Obser vethen otes on thec hoice of tires
(/ page260). #
Fors afet yr easons, onl yuse wheel bolt sor
wheel nut swhichh aveb een appr ovedby
Mercedes-Benza ndfort he wheel in question.
When youi nstallth es teel spar ewheel, it is
essential youu se shor twheel bolt sfor as teel
wheel. Using other wheel bolts when ins talling
th es teel spar ewheel ma ylead todamag etothe
brak esystem. 266
Wheels and tires

#
Tighten thew heel bolts or nuts evenlyint he
sequence indicated (1 to6 ).
Specified tightenin gtorque:
R Steel wheel bolts: 177l b-f t(24 0N m)
R Whee lnuts: 133lb-f t(18 0N m)
R Alloywheel bolts: 133lb-f t(18 0N m) #
Push thep isto nont hehydraulic jac kinagain
and close thep ressur erelease scr ew. #
Vehicles with all-wheel drive: turnthe jack
spindle clockwise as farasitw illg o.
% Yo
uc an no winstallth eh ub caps on steel
wheels wit hwheel bolts. The ins tallation pro‐
cedur edepends on whe ther theh ub cap acts
as atrimt hat co vers thew hole wheel, or just
co vers thec enter. #
Wheel with hub cap: positiontheo pening
fo rt he tir evalveint he hub cap overthe tire
va lve. #
Push thee dgeoft he hub cap ont othe wheel
ri mw ithb othh ands until it engages into
place. Mak esuret he hub cap retaining
cat ches engag eonthesteel wheel. #
Wheel with central hub cap: positionthe
re tainin glugs of thec ent ralh ub cap overthe
whee lbolts. #
Hitthem iddle of theh ub cap toengag eiton
th ew heel. #
Secur ethe faulty wheel in thes par ew heel
brac ket. #
Vehicles with Super Single tires: transport
th ef aulty rear wheel on thel oad area. The
re ar wheel is tool arge fort he spar ewheel
brac ket. #
Chec kthe tir epressur eoft he newl yins talled
wheel and adjus titifnecessar y. #
Retighten thew heel bolts or wheel nuts tothe
specified tightening torque af tert he vehicle
has been driven 31miles (50 km). #
When using awhee lors parew hee lwitha
ne worn ewly painted whee lrim, ha vethe
wheel bolt sornutsr etightene dafter appr ox‐
ima tely 620 mile s(1,000 km) to3,10 0m iles
(5,000 km).
% Ve
hicles with thet irep ressur emonitor
sy stem: all ins talled wheels mus tbeequip‐
ped wit hfunctioning sensors.
Mak esuretoo bservethef ollowing fur ther rela‐
te ds ubject:
R Notesont irep ressur e(/pag e246) Spar
ewheel Note
sont he eme rgency spar ewheel and
spar ewheel Spar
ewheel: wheel and tir edimension saswell
as thet ype of tir ecorrespond totheo ther ins tal‐
led wheels.
Emer gency spar ewheel: wheel and/or tire
dimension saswell asthet ype of tir earediffer‐
ent from thew heel tobe replaced. Alabel wit ha
speed limit can be found on thee mer gency spa re
wheel.
An ins talled emer gency spa rewheel or spare
wheel changes thed riving characteristic sand
bear srisks. &
WARNING Risk of accident caused by
incor rect wheel and tir edimensions
Whe nthe emergency spar ewheel or the
spar ewheel is ins talled, driving characteris‐
tic sm aybe se verely affected.
The reis an inc reased risk of an accident.
To prev ent hazardous situations: #
Oncet he spar ewheel or thee mer gency
spa rewheel has been ins talled, check
th et irep ressur eand adjus tifneces‐
sar y. #
The emer gency spa rewheel ma yonly
be used temp oraril yand mus tbe
re placed wit hastandar dwheel as soon
as possible. #
Neverins tall mor ethan one emergency
spar ewheel. #
When operating your vehicle wit hthe
emergency spar ewheel ins talled, adapt 268
Wheels and tires