change wheel MERCEDES-BENZ SPRINTER 2020 MY20 with no MMS Operator’s Manual

Information on
thed irection of th etires' rota‐
tion Ti
re sw ithas pecified direction of rotatio nh ave
additional benefits ,e.g.ift hereisar isk ofhydro‐
planing. Youw ill on lyga in these benefits if the
cor rect directio nofrotation is obser ved.
An ar rowonthes ide wall of thet irei ndicates its
cor rect directio nofrotation.
Yo um ayalso ins tallas par ew heel agains tthe
direction of rotation. Obser vethet ime restriction
on use as well as thes peed limitation specified
on thes par ew heel. Information on
storing wheels Obser
vethef ollowing when storing wheels:
R Wheels that ha vebeen remo veds hould be
st ored in acool, dr yand, if possible, dark
place.
R Protect thet ires from oil, grease and fuel. Overvie
wofthe tire-chang etool kit Necessar
ytire-changing tools ma yinclude, for
ex ample:
R Jack
R Wheel wrench
% Yo
uw illfind them aximum load capacity of
th ej acks tatedont he adhesiv elabel
attached tothej ack.
The jac kismaintenance-free. If ther eisa
malfunction, please contact aqualified spe‐
cialis tworks hop.
Ve hicles with rear wheel drive The tire-chang
etool kit is located in stowage
compartment 1abo vethes tepoft he co-driv‐
er's door and in thes towa ge compartment in the
fo ot we ll on thec o-driver side. Preparing
thev ehicle foraw heelchange Re
quirements:
R The requ ired tire-chang etool is available.
R The vehicle is no tonaslope.
R The vehicle is on solid, non-slipper yand le vel
ground. #
Appl ythe parking brake. #
Movethef ront wheels tothes traight-ahead
position. #
Vehicles with automatic transmission:
shif tthe transmission toposition 005D. #
Switc hoffthee ngine. #
Mak esuret hat thee ngine cann otbe star ted. #
Take thev ehicle tool kit from thef ootwell on
th ec o-driver side (/ page212). Ve
hicles with rear-wheel drive #
Take thej acka nd thet ire-chang etool kit out
of thes towa ge compartment (/ page234). #
If necessar y,remo vetheh ub cab. #
Assemble thel ug wrenc hextensio nusing the
middl erod and ther od wit hthe lar gest diam‐
et er from thet hree-piece jac kpum pleve r. #
Startin gwitht he middle rod, slide thel ug
wrenc hextensio nasfar as it will go ont othe
lug wrench. #
Using thel ug wrench, loosen thew heel nuts
or bolts on thew heel youw ish tochang eby 234
Wheels and tires

1
Wheel bolt fora lloy wheel
2 Wheel bolt fors teel wheel #
Clean thew heel and wheel hub contact sur fa‐
ces. #
Vehicles with Super Single tires: first
ins tallth ea dap terf or then arro ws parew heel
on thew heel hub. #
Slide thew heel whic histober e-installed
ont othe wheel hub or thea dap terf or the
spar ewheel and push it on.
Ve hicles with light allo ywheels #
Use thes uitable shor twheel bolts fort he
spar esteel wheel found in thev ehicle tool kit. #
Screw inthew heel bolts until they aref inger-
tight.
Wheels with wh eeln uts #
Front wheels wit hwheel nut co ver:press the
wheel nut co vero ntot he wheel nuts. #
Screw inthre ew heel nuts overthe fixing
discs of thew heel nut co ver. #
Turn thew heel so that thew heel bolts ar ein
th em iddle of theh oles. #
Screw inther emaining wheel nuts. #
Slightly tigh tena llth ew heel nuts. Lo
weri ngthev ehicle af teraw heelchange &
WARNING Risk of inju rythro ugh incor‐
re ct tigh tening torque
Th ew heel scould come loose if thew heel
bolts or wheel nuts ar enottightened tothe
prescribed tightening torque. #
Makesur ethe wheel bolts or wheel
nuts ar etightened tothep rescribed
tightening torque. #
Ifyo ua renots ure, do no tmovet he
ve hicle. Consult aqualified specialist
wo rkshop and ha vethet ightening tor‐
qu ec hec kedi mmediately. Re
quirements:
R The ne wwheel has been ins talled
(/ page237).
Obser vethen otes on raising thev ehicle
(/ page235).
Ve hicles with rear wheel drive
Only use them iddle roda nd thep um pleve rrod
wit hthe larges tdiame terf or thej ackasa lug
wrenc hextension. Only inse rtthem iddle rodon
th el ug wrench, and alw aysasf ar as it will go.
Otherwise, ther ods could bend and defor mso
muc hthat they can no longer be use daspump
le ve rs fort he jac k.
Ve hicles with Super Single tires: ifyo um ount
th es par ew heel tother ear axle, do no texceed
th em aximum speed of 34 mph(55 km/h) and
th em aximum dis tance of 62 miles (100 km). Oth‐
erwise, thet ransmission could be damaged due
to thed iffe re nt rotational speed softhe wheels. #
Using thep um pleve r,slowly tur nthe drain
scr ew onthej acka ppr oximatel yone revo lu‐
tion and carefull ylow erthev ehicle. #
Place thej acktoo ne side. #
Pull ther od wit hthe smalles tdiame tero ffthe
pum pleve r.
The shor tened pu mpleve rs erve sasal ug
wrenc hextension. #
Startin gwitht he middle rod, slide thel ug
wrenc hextensio nasfar as it will go ont othe
lug wrench. 238
Wheelsa nd tires

#
Tighten thew heel bolts or nuts evenlyint he
sequence indicated (1 to6 ).
Specified tightenin gtorque:
R Steel wheel bolts: 177l b-f t(24 0N m)
R Whee lnuts: 133lb-f t(18 0N m)
R Alloywheel bolts: 133lb-f t(18 0N m) #
Push thep isto nont hehydraulic jac kinagain
and close thep ressur erelease scr ew. #
Vehicles with all-wheel drive: turnthe jack
spindle clockwise as farasitw illg o.
% Yo
uc an no winstallth eh ub caps on steel
wheels wit hwheel bolts. The ins tallation pro‐
cedur edepends on whe ther theh ub cap acts
as atrimt hat co vers thew hole wheel, or just
co vers thec enter. #
Wheel with hub cap: positiontheo pening
fo rt he tir evalveint he hub cap overthe tire
va lve. #
Push thee dgeoft he hub cap ont othe wheel
ri mw ithb othh ands until it engages into
place. Mak esuret he hub cap retaining
cat ches engag eonthesteel wheel. #
Wheel with central hub cap: positionthe
re tainin glugs of thec ent ralh ub cap overthe
whee lbolts. #
Hitthem iddle of theh ub cap toengag eiton
th ew heel. #
Secur ethe faulty wheel in thes par ew heel
brac ket. #
Vehicles with Super Single tires: transport
th ef aulty rear wheel on thel oad area. The
re ar wheel is tool arge fort he spar ewheel
brac ket. #
Chec kthe tir epressur eoft he newl yins talled
wheel and adjus titifnecessar y. #
Retighten thew heel bolts or wheel nuts tothe
specified tightening torque af tert he vehicle
has been driven 31miles (50 km). #
When using awhee lors parew hee lwitha
ne worn ewly painted whee lrim, ha vethe
wheel bolt sornutsr etightene dafter appr ox‐
ima tely 620 mile s(1,000 km) to3,10 0m iles
(5,000 km).
% Ve
hicles with thet irep ressur emonitor
sy stem: all ins talled wheels mus tbeequip‐
ped wit hfunctioning sensors.
Mak esuretoo bservethef ollowing fur ther rela‐
te ds ubject:
R Notesont irep ressur e(/pag e217 ) Spar
ewheel Note
sont he eme rgency spar ewheel and
spar ewheel Spar
ewheel: wheel and tir edimension saswell
as thet ype of tir ecorrespond totheo ther ins tal‐
led wheels.
Emer gency spar ewheel: wheel and/or tire
dimension saswell asthet ype of tir earediffer‐
ent from thew heel tobe replaced. Alabel wit ha
speed limit can be found on thee mer gency spa re
wheel.
An ins talled emer gency spa rewheel or spare
wheel changes thed riving characteristic sand
bear srisks. &
WARNING Risk of accident caused by
incor rect wheel and tir edimensions
Whe nthe emergency spar ewheel or the
spar ewheel is ins talled, driving characteris‐
tic sm aybe se verely affected.
The reis an inc reased risk of an accident.
To prev ent hazardous situations: #
Oncet he spar ewheel or thee mer gency
spa rewheel has been ins talled, check
th et irep ressur eand adjus tifneces‐
sar y. #
The emer gency spa rewheel ma yonly
be used temp oraril yand mus tbe
re placed wit hastandar dwheel as soon
as possible. #
Neverins tall mor ethan one emergency
spar ewheel. #
When operating your vehicle wit hthe
emergency spar ewheel ins talled, adapt Wheels and tires
239

#
Open ther ear-end doors. #
Place ascrew driver int orecesses 2and
th en pr yoffco vers 1 . #
Using thel ug wrenc hfromt hevehicle tool kit,
unscr ewthen ow visible bolts counter-clock‐
wise byappr oximatel y20turns. #
Slightly raise spar ewheel car rier 4 and
unhook left-hand saf etyh ook 3. #
Assemble thep um pleve rfor thej acka nd
slide it int osleeve5 onther ight-ha ndside
of spar ewheel car rier 4. #
Raise spar ewheel car rier 4 withthe pump
le ve ra nd unhook right-han dsafet yh ook 3. #
Slowl ylow er spar ewhee lcarrier 4 tothe
ground. #
Lift spar ewheel car rier 4 slightl yand pull
th ep um pleve rout of thes lee ve. #
Use thep um pleve rtol iftt he spar ewheel
be yond ther ear edg eofsparew heel car rier
4. #
Carefully remo vethes par ew heel from spare
wheel car rier 4.T he spar ewheel is heavy.
When thes par ew heel is remo ved, thec enter
of gr avity changes due totheh eavy weight of
th ew heel. The spar ewheel ma yslip down or
tip ove r.
Ve hicles with rear wheel drive: installin gthe
spar ewheel (Cargo Van/Passenger Van) #
Carefully place thes par ew heel ont ospare
wheel car rier 4.T he spar ewheel is heavy.
When youp lacethe spar ewheel ont ospare
wheel car rier 4,t he center of gravity
ch anges due tothew eight of thew heel. The
spar ewheel ma yslip down or tip over. #
Slide thep um pleve rfor thej acki ntos leeve
5 on spar ewheel car rier 4. #
Raise spar ewheel car rier 4 withthe pump
le ve ra nd attac hright-ha ndsafetyh ook 3. #
Slight lyraise spar ewheel car rier 4 and
attac hleft-hand saf etyh ook 3. #
Pull thep um pleve rout of slee ve5 . #
Using thel ug wrench, tighten saf etyh ook
bolts 3byturning them clockwise. #
Replace and engag ecovers 1. #
Close ther ear-end doors.
Ve hicles with rear wheel drive: removing the
spar ewheel (vehicl ewithl ow ered chassis) Bolt co
vers fort he saf etyh ooks (exa mp le: Cargo
Va n) Wheel
sand tires 241

#
Open ther ear-end doors. #
Place ascrew driver int orecesses 2and
th en pr yoffco vers 1 . #
Using thel ug wrenc hfromt hevehicle tool kit,
unscr ewthen ow visible bolts counter-clock‐
wise byappr oximatel y20turns. #
Slightly raise spar ewheel car rier 4 and
unhook left-hand saf etyh ook 3. #
Assemble thep um pleve rfor thej acka nd
slide it int osleeve5 onther ight-ha ndside
of spar ewheel car rier 4. #
Raise thes par ew heel car rier wit hthe pump
le ve ra nd unhook right-han dsafet yh ook 3. #
Position loop 7ofextraction device 6on
th es par ew heel so that youw ill later be able
to attac hlug wrench 8. #
Prepar ethe jac k. #
Place thej ackb eneat hthe cor responding
jac ksuppor tpoint. #
Movethep um pleve rupa nd down until the
tir eisr aised amaximum of 1.18 in (3 cm) off
th eg round. #
Hook lug wrench 8intoloop 7ofextrac‐
tio nd evice 6 onthes par ew heel. #
Carefully remo vethes par ew heel from spare
wheel car rier 4.T he spar ewheel is heavy.
When thes par ew heel is remo ved, thec enter
of gr avity changes due totheh eavy weight of
th ew heel. The spar ewheel ma yslip down or
tip ove r. #
Remo vethes par ew heel extraction device
and stor eitinas afep lace. Youc an now
ins tallth es par ew heel on your vehicle. #
Lowe rthe vehicle.
Ve hicles with rear wheel drive: installin gthe
spar ewheel (vehicle with lo weredc hassis)
% In
thee vent of aflat tire, youm aystor et he
fa ulty wheel inside thev ehicle onl y.An intact
whee lmaybe stored in thes par ew heel car‐
ri er onl ywhen thev ehicle is unladen. Aladen
ve hicle mus tfirst be raised. #
Carefull yplace thes par ew heel ont ospare
wheel car rier 4.T he spar ewheel is heavy.
When youp lacethe spar ewheel ont ospare
wheel car rier 4,t he center of gravity
ch anges due tothew eight of thew heel. The
spar ewheel ma yslip down or tip over. #
Slide thep um pleve rfor thej acki ntos leeve
5 on spar ewheel car rier 4. #
Raise spar ewheel car rier 4 withthe pump
le ve ra nd attac hright-ha ndsafetyh ook 3. #
Slight lyraise spar ewheel car rier 4 and
attac hleft-hand saf etyh ook 3. #
Pull thep um pleve rout of slee ve5 . #
Using thel ug wrench, tighten saf etyh ook
bolts 3byturning them clockwise. #
Replace and engag ecovers 1. #
Close ther ear-end doors. 242
Wheels and tires

Ve
hicles with rear wheel drive: removing the
spar ewheel (chassis) #
Loosen wing nuts 3manually and then
re mo vethem. #
Loosen nuts 2asfarast hethre ad end. #
Slightly raise spar ewheel car rier 4 and
unhook left-hand saf etyh ook 1. #
Assemble thep um pleve rfor thej acka nd
slide it int othe slee veon ther ight-ha ndside
of spar ewheel car rier 4. #
Raise spar ewheel car rier 4 withthe pump
le ve ra nd unhook right-han dsafet yh ook 1. #
Slowl ylow er spar ewhee lcarrier 4 tothe
ground. #
Lift spar ewheel car rier 4 slightl yand pull
th ep um pleve rout of thes lee ve. #
Use thep um pleve rtol iftt he spar ewheel
be yond ther ear edg eofthe spar ewheel car‐
ri er. #
Carefully remo vethes par ew heel from the
spar ewheel car rier .T he spar ewheel is heavy.
When thes par ew heel is remo ved, thec enter
of gr avity changes due totheh eavy weight of
th ew heel. The spar ewheel ma yslip down or
tip ove r.
Ve hicles with rear wheel drive: installin gthe
spar ewheel (chassis) #
Carefully place thes par ew heel ont ospare
wheel car rier 4.T he spar ewheel is heavy.
When youp lacethe spar ewheel ont othe
spar ewheel car rier ,t he center of gr avity
ch anges due tothew eight of thew heel. The
spar ewheel ma yslip down or tip over. #
Slide thep um pleve rfor thej acki ntot he
slee veon spar ewheel car rier 4. #
Raise spar ewheel car rier 4 withthe pump
le ve ra nd attac hright-ha ndsafetyh ook 1. #
Slight lyraise thes par ew heel car rier and
attac hleft-hand saf etyh ook 1. #
Pull thep um pleve rout of thes lee ve. #
Tighten nuts 2. #
Put wing nuts 3in place and tighten them. Wheels and tires
243