lock MERCEDES-BENZ V-CLASS 2021 Owner's Guide

head
restraint supports the back of the
head at about eye le vel. Do not inter
change the head restraints of the front
and rear seats. Otherwise, you will not be able to
set the height and inclination of the head restraints
to the cor rect position.
Using the head restraint fore -and-aT adjustment,
adjust the head restraint so that it is as close to
th e back of the head as possible. #
T
To r
o r aise:
aise: pullthe head restraint up wards into
th e desired position and ensure that it
engages.
% Use the head restraint only when it is
engaged. #
T
To low
o low er
er:
:press release button 2, slidethe
head restraint down wards into the desired
position and ensure that it engages.
% Use the head restraint only when it is
engaged. #
T
To mov
o mov e f
e forw
orw ar
ards:
ds: press release button 1
and pull the head restraint forw ards until it
engages in the desired position. #
T
To mov
o mov e bac
e backw
kwar
ards:
ds: press release button 1
and slide the head restraint ba ckwards into the
desired position. #
T
To r
o r emov
emov e:
e:press release button 2and pull
th e head restraint up and out. #
T
To
o /t:
/t: press the head restraint wi thdetent into
th e holes on the leT-hand side when vie wed in
th e direction of tr avel until it engages. A
A djus
djusting t ting t he head r
he head r es
estrtraint electr
aint electr ically
ically
* NO
NOTE
TEDamage tothe electrical head
re straint when adjusted manually If
th e height of the electrically adjustable head
re straint is adjusted manuall y,this can damage
th e mechanism of the head restraint. #
Adjust the height of the electrically
adjustable head restraints using the but-
to ns in the door trim. R
R
eq
eq uir
uir ements:
ements:
R The vehicle is switched on or the door is open. #
T
To adjus
o adjust t t the height
he height: :push button 1up or
down in the direction of the ar row. #
T To mov o mov e f
e forw
orw ar
ar ds or bac
ds or bac kw
kwar
ards:
ds: press and
hold release knob 2and slide the head
re straint forw ards or backwards tothe desired
position.
% Ifth eve hicle is not switched on, you can
adjust the head restraint height wi thin 30 sec-
onds of unlocking theve hicle. Seats and st
owage
95
95

#
Make sure that the air inlet grilles on the back
of the seat backrest are not co vered. #
T
To switc
o switc h on / incr
h on / incr ease t
ease the lev
he level:
el:press button
1 repeatedly until the desired blo wer setting
is set.
Depending on the blo wer setting, one tothree
indicator lamps will light up. #
T To switc
o switc h
h o.
o. / r
/ reduce t
educe t he lev
he level:
el:press button
1 repeatedly until the desired blo wer setting
is set.
If all indicator lamps are o., the seat ventila-
tion is switched o..
% The con venience opening function automati-
cally switches the seat ventilation forth e driv-
er's seat tothe highest blo wer setting
(/ page 64).
% Rear seat ventilation activation is possible only
once theve hicle has been switched on. S S
t
teer
eer ing wheel
ing wheel A
A
djus
djusting t ting t he st
he steer
eering wheel
ing wheel &
W
WARNING
ARNING Risk of accident due toadjust-
ing theve hicle settings while theve hicle is
in motion
Yo u could lose control of theve hicle in thefo l-
lowing situations in particular:
R ifyo u adjust the driver's seat, the head
re straint, the steering wheel or the mir ror
while theve hicle is in motion
R ifyo ufa sten your seat belt while theve hi-
cle is in motion #
Before starting theve hicle: in particular,
adjust the driver's seat, head restraint,
stee ring wheel and mir ror,and fasten
yo ur seat belt. &
W
WARNING
ARNING Risk of accident due to
unloc ked steering wheel
The steering wheel may mo veunexpectedly if it
is unloc ked while theve hicle is in motion. #
Make sure that the steering wheel is
loc ked before driving o.. #
Never unlock the steering wheel when
th eve hicle is in motion. &
W
WARNING
ARNING Risk of ent rapment forch ildren
when adjusting the steering wheel
Children could injure themsel ves if they adjust
th e steering wheel. #
Never lea vechildren unattended in the
ve hicle. #
When leaving theve hicle, alw aysta ke the
ke y with you and lock theve hicle. A
A
djus
djusting t ting t he st
he steer
eering wheel
ing wheel #
T
To unloc
o unloc k:
k:push release le ver3 down as far
as it will go.
The steering column is unloc ked. #
Adjust height 1and distance 2tothe steer-
ing wheel. #
T To loc
o loc k:
k:push release le ver3 up as far as it
will go.
The steering column is loc ked. S S
t
to
o w
w ag
ag e ar
e ar eas
eas S
S
t
to
o w
w ag
ag e spaces and st ow
e spaces and st owag
age com
e com par
par tments
tments Opening and closing t
Opening and closing t
he stow
he st owag
age com
e com par
partment in
tment in
t
t he centr
he centr e console
e console #
Slide co ver1 ofthe centre console up or
down using handle 2. 98
98
Seats and st
owage

The
following can be found in the st owa gecom-
partment of the centre console depending on the
car's equipment:
R A 12 V soc ket (/ page 104) or the cigar ette
lighter (/ page 104)
R The Media Inter face with two USB ports or
with two USB ports and one SD card slot
R The holder forth e mobile phone cradle
R The ashtr ay (/ page 103)
R A st owage compartment or a device ins talla-
tion frame for auxiliary equipment, e.g. a
ta ch og raph
Opening and closing t
Opening and closing t he stow
he st owag
age com
e com par
partment
tment
under t
under t he ar
he armr
mrest
est #
T
To open:
o open: press button 1.
The st owage compartment opens. #
T To close: o close: presstoclose the caps of the st ow-
age compartment in any order.
Opening and closing t
Opening and closing t he glov
he glove com
e comparpartment
tment &
W
WARNING
ARNING Risk of injury due toobjects
being st owed incor rectly
If objects in theve hicle interior are st owed
incor rectl y,they can slide or be thro wn around
and hit vehicle occupants. In addition, cup
holders, open st owage spaces and mobile
phone brac kets cannot alw aysreta in all
objects they contain.
There is a risk of injur y,particular lyin the
eve nt of sudden braking or a sudden change in
direction. #
Always st owobjects in such a wayth at
th ey cannot be thro wn around in such
situations. #
Always make sure that objects do not
pr otru de from st owage spaces, lug gage
nets or st owage nets. #
Close the loc kable st owage spaces
before starting a jou rney. #
Always st owand secure heavy, hard,
poin ted, sharp-edged, fragile or bulky
objects in the boot. Comply with
the inst ructions for loading theve hi-
cle. 1
Unloc ked
2 Locked
3 Glovecompartment handle #
T To loc o loc k/unloc
k/unloc k:
k:turn the emer gency key a
qu arter turn anti-clockwise 2(to lock) or
clockwise 1(to unlock). #
T
To open:
o open: pull glovecompartment handle 3in
th e direction of the ar row. #
T To close: o close: fold the glo vecompartment handle
up and press it until it engages.
Opening t
Opening t he glasses com
he glasses com par
partment
tment #
Press on the glasses compartment 1. Seats and st
owage
99
99

The
refrigerator box can bear a maximum load of
3.5 kg. #
T
To open:
o open: fold co ver1 upwards. #
T
To switc
o switc h t
h t he cooling lev
he cooling lev el t
el to lo w:
o lo w:press button
2 for appr oximately two seconds. #
T
To switc
o switc h t
h t he cooling lev
he cooling lev el t
el to high:
o high: press but-
to n2 again. #
T
To switc
o switc h
h o.:
o.: press button 2for appr ox-
imately two seconds until all indicator lamps go
out.
% Ifyo u do not need touse there frigerator box
fo r an extended period, you should switch it
o., defrost it and clean it. ATer doing so, lea ve
th e cap open for a time. N No
ot
tes on att
es on att ac
aching t
hing t he iP
he iPad
ad®
® Yo
ur vehicle is equipped with iPad ®
attachment 1
on the driver's and co-driver's seat backrests.
A mount, which has been tested and appro ved
especially for Mercedes-Benz vehicles, is available
as an accessor y.Only this mount can unlock the
attachment opening and allow the iPad ®
to be
ch arge d whilst it is ins talled.
iPad ®
attachment 1may only be used for acces-
sories up to42 W (3.5 A). Contact a Mercedes-Benz Service Centre
for infor-
mation and availabilit y.Before using the mount,
please read the operating inst ructions forthe
mount.
% Only use accessories which ha vebeen tested
and recommended byMercedes-Benz. 106
106
Seats and st
owage

R
R
eplacing fr
eplacing fr ont light bulbs (v
ont light bulbs (v ehicles wit
ehicles with halog
h halogen
en
headlam
headlam ps)
ps) Ov
Ov
er
ervie
vie w of fr
w of fr ont light sour
ont light sour ce types
ce types 1
Additional turn signal lamp on the outside mir-
ro r: LED
2 Turn signal light: PY 21 W
3 Low beam: H7 55 W
4 High beam/standing/parking lights/d aytime
ru nning lights: H15 55 W/15 W
R
R eplacing light sour
eplacing light sour ces in t
ces in the headla mp
he headlamp
R
R eq
eq uir
uir ements:
ements:
R The lighting system is switched o..
R The appropriate front wheel is turned in wards.
R Lo
Lo w beam:
w beam: youre qu ire a H7 55 W light bulb.
R T
T ur
ur n signal light
n signal light: :yo ure qu ire a PY 21 W light
bulb.
R High beam / st
High beam / st anding/par
anding/parking lights / da y-
king lights / da y-
time r
time r unning lights:
unning lights: youre qu ire a H15 55 W/
15 W light bulb.
F
F itting/r
itting/r emo
emoving t
ving t he cov
he cov er in t
er in the fr
he front wheel ar ch
ont wheel ar ch #
T
To r
o r emov
emov e:
e:grip the centre of co ver1, slide it
upwards and pull it out.
The co ver will hang down wards on the strap. #
T To
o /t:
/t: insert co ver1 attheto p and slide it
down wards until it engages.
Lo
Lo w beam
w beam #
Remo vethe co ver in the front wheel ar ch. #
Turn housing co ver1 anti-clockwise and
re mo veit. #
Turn soc ket2 for low beam tothe leT and
pull it out. #
Pull the bulb out of soc ket2. #
Inse rtthe new bulb into soc ket2. #
Inse rtsoc ket2 and rotate itto theright to
tighten it. #
Press on housing co ver1 and ro tate itto the
ri ght totighten it. #
Replace the co ver in the front wheel ar ch.
High beam, st
High beam, st anding/par
anding/parking lights and da
king lights and da ytime
ytime
r
r unning lights
unning lights #
Open the bonnet. 114
114
Light and vision

#
Turn housing co ver1 anti-clockwise and
re mo veit. #
Pull out the bulb with soc ket2. #
Inse rtthe new bulb with soc ket2 and engage
it as far as it will go. #
Press on housing co ver1 and ro tate itto the
ri ght totighten it. #
Close the bonnet.
T
T ur
ur n signal light
n signal light #
Open the bonnet. #
Turn soc ket1 anti-clockwise and pull it out. #
Pull the bulb out of soc ket1. #
Inse rtthe new bulb into soc ket1. #
Inse rtsoc ket1 and turn it clockwise until it
engages. #
Close the bonnet. R
R
eplacing r
eplacing r ear bulbs
ear bulbs Ov
Ov
er
ervie
vie w of r
w of r ear light sour
ear light sour ce types
ce types Ve
hicles with standard tail lamp
1 Third brake light: LED
2 Licence plate lighting: LED
3 Rear fog light (driver's side): P 21 W
4 Reversing light: P 21 W
5 Brake light, tail light/parking lights: P 21 W
6 Turn signal light: P 21 W
Ve hicles with LED tail lamps 1
Third brake light: LED
2 Licence plate lighting: LED
3 Rear fog light (driver's side): LED
4 Reversing light: W 16 W
5 Brake light, tail light/parking lights: LED
6 Turn signal light: LED
R
R eplacing light sour
eplacing light sour ces in t
ces in the t
he tail lamp
ail lamp
R
R eq
eq uir
uir ements
ements
R The lighting system is switched o..
R St
Standar
andar d t
d tail lam
ail lam p:
p:youre qu ire a P 21 W light
source.
R LED t
LED t ail lam
ail lam p:
p:youre qu ire a W 16 W light
source.
R
R emo
emo ving t
ving t he t
he tail lamp
ail lamp
* NO
NOTE
TEDamage tothe paintwork during tail
lamp remo val The paintwork may be damaged when
theta il
lamps are remo ved. The tail lamp ma y,for
ex ample, scratch the paintwork when it is
re mo ved. #
Remo vetheta il lamps carefull y. #
Mercedes-Benz recommends having the
ta il lamp light sources replaced at a
qu ali/ed specialist workshop. Please no
tethat you can change the bulb of the
re ve rsing light only in the case of an LED tail lamp. #
Open theta ilgate.
% You will /nd a scr ewdriver in theve hicle tool
kit (/ page 250). #
Unscr ewtwo side scr ews1. Light and vision
115
115

#
Push tail lamp 2outwards against bolts 3
as far as it will go. #
Press tail lamp 2o. outwards and away from
bolts 3. #
Pull the connector o. the bulb mount of tail
lamp 2.
Inst
Inst alling t
alling t he t
he tail lamp
ail lamp #
Push the connector into the bulb mount of tail
lamp 2. #
Push tail lamp 2onto bolts 3from the side
and press it against theve hicle. #
Tighten two side scr ews1.
S S t tandar
andar d t
d tail lamp
ail lamp #
Unscr ewthre e scr ews1 and remo vebulb
mount 2from theta il lamp. Bulb mount
3
Turn signal light
4 Brake light, tail light, parking light
5 Reversing light
6 Rear fog light (only on the driver's side) #
Remo vetheta il lamp. #
Gently turn the bulb anti-clockwise and take it
out of the soc ket. #
Push the new bulb into the soc ket and turn it
clockwise toscr ew it in. #
Insert bulb mount 2into theta il lamp and
tighten all thre e scr ews1. #
Installth eta il lamp. LED t LED t
ail lamp
ail lamp #
Remo vetheta il lamp. #
Unscr ewhousing co ver1 byturning it anti-
clockwise. #
Turn the soc ket anti-clockwise and pull it out. #
Pull the bulb out of the soc ket. #
Inse rtthe new bulb into the soc ket. #
Inse rtthe soc ket and rotate it clockwise to
tighten it. #
Press on housing co ver1 and ro tate it cloc k-
wise totighten it. #
Install theta il lamp. R
R
eplacing int
eplacing int er
erior light bulbs
ior light bulbs R
R
eplacing light sour
eplacing light sour ces in t
ces in t he int
he inter
erior
ior
R
R eq
eq uir
uir ements:
ements:
R The interior lighting has been switched o..
R R
Rear and load com
ear and load com par
partment lam
tment lam p:
p:youre qu ire
a T10 6W xenon light sou rce.
R Int
Inter
erior and surr
ior and surr ound lighting:
ound lighting: youre qu ire a
W 5 W light source.
R Signal and ambient lam Signal and ambient lam p in t p in the t
he tailg
ailgat
ate:
e: you
re qu ire a W 5 W light source. 116
116
Light and vision

R
R
ear and load com
ear and load com par
partment lam
tment lam ps
ps #
Push in the catch spring of lens 1with a suit-
able object, e.g. a scr ewdriver, and then prise
o. the lens with the lamp housing. #
Push the lugs of soc ket2 inwa rds. #
Remo velight source 3from the lamp hous-
ing. #
Insert the new light source. #
Position the lens on the lamp housing and
engage it. #
Align the lens with the lamp housing and
engage it.
A
A dditional int
dditional int er
erior and surr
ior and surr ound lighting
ound lighting
Depending on the equipment, replacing the light
sources as described here applies tothefo llowing
lamps:
R The sun visor mir ror lamp
R The ambient lamp at the bottom of the front
door
R The ambient lamp on the inside of theta ilgate #
Push in the catch spring of lamp housing 1
with a suitable object, e.g. a scr ewdriver, and
prise o. lamp housing 1. #
Turn soc ket2 anti-clockwise and pull it out of
lamp housing 1. #
Pull bulb 3out of soc ket2. #
Push new bulb 3into soc ket2. #
Screw soc ket2 into lamp housing 1by
turning it clockwise. #
Place lamp housing 1in position on the leT
and engage it.
Signal and ambient lam
Signal and ambient lam p in t
p in the t
he tailg
ailgate
ate #
Push in the catch spring of the lamp housing
on the side of transparent lens 3with a suita-
ble object, e.g. a scr ewdriver, and prise o. the
lamp housing. #
Turn soc ket2 anti-clockwise and pull it out of
th e lamp housing. #
Pull the bulb out of soc ket2. #
Push the new bulb into soc ket2. #
Screw soc ket2 into the lamp housing by
turning it clockwise. #
Place the lamp housing in position at the side
of red lens 1and engage it. Light and vision
117
117

#
Neverfo ld the wiper arm on the wind-
screen or rear wind owback until a wiper
blade has been /tted. Keep hold of the
wiper arm when replacing a wiper blade. *
N
NOOTE
TE Damage tobonnet or windscreen
wipers when opening the bonnet If
th e windscreen wipers ha vebeen folded
back from the windscreen when the bonnet is
opened, the windscreen wipers or the bonnet
may be damaged. #
Ensure that the windscreen wipers ha ve
not been folded back from the wind-
screen. R
R
emo
emo ving t
ving t he wiper blades
he wiper blades #
Foldthe wiper arms away from the windscreen. #
Hold the wiper arm with one hand. With the
ot her hand, turn the wiper blade in the direc-
tion of ar row 1 awa y from the wiper arm as
fa r as it will go. #
Slide catch 2inthe direction of ar row 3
until it engages in there mo val position. #
Remo vethe wiper blade from the wiper arm in
th e direction of ar row 4. F
F itting t
itting t he wiper blades
he wiper blades #
Insert the new wiper blade into the wiper arm
in the direction of ar row 1. #
Slide catch 2inthe direction of ar row 3
until it engages in the locking position. #
Make sure that the wiper blade is seated cor-
re ctl y. #
Foldthe wiper arms back onto the windscreen.
Maint
Maint enance display
enance display #
Remo veprotective /lm 1from the mainte-
nance displa yson the tips of the ne wly/tted
wiper blades.
If th e colour of the maintenance display changes
from black toyello w, the wiper blades should be
re placed.
% The time until the colour changes varies
depending on the usage conditions. Light and vision
119
119

R
ifth eve hicle is switched on
R when the hot-water auxiliary heater is switched
on Oper
Oper ating air v
ating air v ents
ents A
A
djus
djusting t ting t he air v
he air v ents
ents &
W
WARNING
ARNING Risk of burns or frostbite due to
being too close tothe air vents
Ve ry hot or very cold air can 0ow from the air
ve nts. #
Make sure that all vehicle occupants
alw ays maintain a su1cient dis tance
from the air vents. #
If necessar y,direct the air0ow toano ther
area of theve hicle interior. A
A
djus
djusting t ting t he centr
he centr e air v
e air vents
ents #
T
T o open/close:
o open/close: turn controller 3or4 tothe
leT or right as far as it will go. #
T
T o adjus
o adjust t t the
he air0ow
air0ow dir
dir ection:
ection: hold centre air
ve nt 1 or2 bycont roller 3or4 and
mo veit up or down or tothe leT or right.
A
A djus
djusting t ting t he side air v
he side air v ents:
ents: #
T
T o open/close:
o open/close: turn controller 2clockwise or
anti-clockwise as far as it will go. #
T
T o adjus
o adjust t t the
he air0ow
air0ow dir
dir ection:
ection: hold side air
ve nt 1 bycont roller 2and mo veit up or
down or tothe leT or right. Opening/closing t
Opening/closing t he r
he rear air v
ear air v ents:
ents: 1
Adjustment wheel forve rtically adjusting and
re gulating air0 ow
2 Adjustment wheel for horizontally adjusting
air0ow
The air vents can be adjusted only on vehicles with
re ar-compartment air conditioning. #
T
To open:
o open: turn adjustment wheel 1ofthere ar
air vent tothe centre position. #
T
To close:
o close: turn adjustment wheel 1tothe
upper or lo wer end position. A
A
uxiliar
uxiliar y heating
y heating Inf
Inf
or
ormation about auxiliar
mation about auxiliar y heating
y heating &
D
DAN
AN GER
GER Risk of fata l injury due topoison-
ous exhaust gases
If th eta ilpipe is bloc ked or su1cient ventilation
is not possible, poisonous exhaust gases such
as carbon monoxide may enter theve hicle.
This is the case in enclosed spaces or if the
ve hicle gets stuck in sno w,forex ample. #
Always switch the stationary heater o. in
enclosed spaces without an air extrac-
tion system, e.g. in garage s. #
Keep theta ilpipe and the area around the
ve hicle free from snow when theve hicle
or the stationary heater is running. #
Open a wind owonthe side of theve hicle
fa cing away from the wind toensure an
adequate supply of fresh air. &
W
WARNING
ARNING Risk of /re due tohot stationary
heater components and exhaust gases
Flammable materials such as lea ves, grass or
twigs may ignite. #
When the stationary heater is switched
on, make sure that: Climate cont
rol
129
129