seat memory Mercury Villager 2002 Owner's Manuals

•Rock
•Soft
•To p 4 0
RDS show
RDS sends information with the FM
broadcast, including: station name,
station type, and/or radio text. To
view this information:
•With the RDS menu enabled,
press the RDS control until SHOW is displayed.
•Use the SEL control to select
TYPE, NAME, TEXT or NONE.
When your radio is turned to a
RDS station, RDS station TYPE,
station NAME, or TEXT message
will be displayed along with the
frequency. Press SEL in order to
scroll through the text messages.
Rear audio controls (if equipped)
Your vehicle may be equipped with rear audio controls for the rear seat
passengers. Refer toRear Seat Controlsin this Chapter for more
information.
REAR SEAT CONTROLS (IF EQUIPPED)
The Rear Seat Controls (RSC) allow
the rear seat passengers to operate
the radio, tape, CD or CD changer
(if equipped).
Simultaneously press the memory
preset controls 3 and 5 to engage
the RSC.
will appear in the
radio display. Press 3 and 5 again to
disengage the RSC.
AUTO
RDS
CLK
SEL
VOLUME MEDIA
MEMSEEK
REW1FF2SIDE 1-23
4COMP5SHUFFLE6
Entertainment Systems
50

•6 way (driver seat)
•4 way (passenger seat)
Rotate the vertical control to adjust
the seatback.
Memory seats and mirrors (if equipped)
Some vehicles may only have the
memory feature available for the
seats.
The memory seat control is located
on the driver’s door panel. The
control operates with the ignition in
the OFF position or the ignition is in
the ON position and the vehicle is in
P (Park) or N (Neutral).
The two buttons provide three
memory positions, one individual position for each button and a third
position obtained by pressing buttons 1 and 2 simultaneously.
Position three (pressing 1 and 2 simultaneously) is always full rearward
and downward for exit mode, but is not programmable.
To record the memory positions:
1. Move the seat and mirror to the desired position using the manual
controls.
2 1
MEMORY
SEAT
Seating and Safety Restraints
118

2. Press button 1 or 2 and hold for at least two seconds. The indicator
light will stay on until the position is programmed. When the position has
been programmed, the indicator light will flash three times. Repeat
procedure for second position.
To record a remote entry transmitter:
1. Program a desired position to a memory switch as indicated above.
2. Press and hold the desired memory position button. Within ten
seconds, press the unlock button on the transmitter while the memory
button is pressed.
3. When the transmitter has been programmed, the indicator will flash
five times. The indicator light will remain illuminated until the memory
button is pressed again or ten seconds lapse.
To remove a programmed seat position:
1. Press and hold both memory seat buttons 1 and 2 and then press the
unlock button on the remote entry transmitter.
REAR SEATS
Removable floor mats
Whenever the floor mats are removed to adjust or move any of the rear
seats, always reinstall the mats before passengers ride in the vehicle. The
floor mats are specifically designed to keep objects out of the seat
tracks.
•7 passenger vehicle
A. Cargo mat (if equipped)
B. Narrow mats
C. Sliding door mats, LH/RH
ACB
Seating and Safety Restraints
119

Oil (see Engine oil) ..................212
Overdrive ...........................103, 166
P
Panic alarm feature, remote
entry system ..............................110
Parking brake ............................160
Parts (see Motorcraft parts) ....239
Power distribution box
(see Fuses) ...............................179
Power door locks ......................108
Power mirrors .............................89
Power point .................................86
Power steering ..........................161
fluid, checking and adding ....231
fluid, refill capacity ................239
fluid, specifications .........240–241
Power Windows ...........................87
R
Radio ............................................20
Radio reception .....................56–57
Rear window defroster ...............72
Relays ................................175, 182
Remote entry system .......109–110
illuminated entry ....................112
locking/unlocking
doors ................................108, 110
panic alarm .............................110
replacement/additional
transmitters .............................111
replacing the batteries ...........111
Roadside assistance ..................173
Roof rack ...................................107S
Safety belts (see Safety
restraints) ..........................129–133
Safety defects, reporting ..........202
Safety restraints ................129–133
cleaning the safety belts ........135
extension assembly ................135
for adults .........................130–132
for children .............................141
lap belt ....................................134
warning light and
chime ...........................12, 15, 135
Safety seats for children ..........144
Seat belts (see Safety
restraints) ..................................129
Seats ..........................................115
child safety seats ....................144
memory seat ...........................118
Servicing your vehicle ..............209
Spare tire (see Changing the
Tire) ...........................................183
Spark plugs,
specifications .............239, 241–242
Specification chart,
lubricants ...........................240–241
Speed control ..............................90
Speedometer ...............................18
Starting your vehicle ........155–157
jump starting ..........................188
Steering wheel
controls ..........................85, 90, 94
tilting .........................................85
T
Tachometer .................................19
Tires ...........................182, 235–236
Index
252