Page 68 MINI COOPER 2005 User Guide
[x] Cancel search | Manufacturer: MINI, Model Year: 2005, Model line: COOPER, Model: MINI COOPER 2005Pages: 165, PDF Size: 4.64 MB
Page 30 of 165
28
OPENING AND CLOSING: FROM INSIDEWith this switch, you operate the central locking system when the doors are closed.
The doors and tailgate are unlocked or
locked only. The anti-theft system is not
activated.
If the remote control has been used to unlock only the driver's door, refer
to page 26, and you touch the switch when
the driver's door is open, the other door, the
tailgate, and the fuel filler door are
unlocked.
If the driver's door is closed, touching the
switch locks it.<
To lock>Briefly press the switch downward or>push down the safety lock buttons on
the doors.
After you have driven off, the central locking system automatically locks
your vehicle once a certain speed has been
reached.
accident. Children might be able to lock the
doors from the inside. Always take the
vehicle's keys with you so that you can
open the vehicle again from the outside at
any time.<
To unlock and open the doors1. Briefly press the switch upward2. Pull the door handle above the armrest
orpull the door handle for each door twice:
to unlock and open.
Convenience opening modePress and hold the central locking switch
upwards for a longer period.
In the MINI, the windows and the glass
sunroof are opened.
In the MINI Convertible, the windows and
the folding roof are opened.To open the convertible top on the MINI
Convertible: release the switch, then press
and hold it upwards for a longer period
until the convertible top is completely open
and the windows are again closed.
ProCarManuals.com
Page 31 of 165
29
OVERVIEW REPAIRS OPERATIONCONTROLS DATA INDEX
TAILGATE To open from the outside Push the button in the strip handle and
open the tailgate.For information on unlocking via the cen
-
tral locking system, refer to page
26.
To close
To avoid injuries, as with all closing procedures be sure that the travel
path of the tailgate is clear when it is
closed.
Drive the vehicle only when the tailgate is
completely closed. Otherwise, exhaust
fumes could penetrate the interior of the
vehicle.
well as the folding roof on the MINI Con
-
vertible
2. Sharply increase the air supply for the
heater, the air conditioning or the auto
-
matic climate control, refer to page
75
or 78.
Handle recesses on the MINIThe handle recesses in the interior trim
panel of the tailgate make it easier to pull it
down.
ProCarManuals.com
Page 33 of 165
31
OVERVIEW REPAIRS OPERATIONCONTROLS DATA INDEX
TAILGATE
ELECTRIC POWER WINDOWS
2.
Fold the rear bench seat upward and remove the hook attached to it
3. Using the hook, reach backward
between the convertible top and the
rear backrest to pull one of the levers for
releasing the folding rear backrest, refer
to page
86
4. Fold rear backrests forward
5.
Pull the handle, arrow.
The tailgate is released.
To open the windows From ignition key position
1:
>Press the switch downwards.
The window opens until you release the
switch or>briefly press the switch downwards.
The window opens automatically.
Pressing the switch again stops the oper
-
ation.To close the windows
Make sure that the closing range of the windows is unobstructed, other
-
wise personal injury could result when the
windows close.<
ProCarManuals.com
Page 34 of 165
32
ELECTRIC POWER WINDOWSFrom ignition key position
1:
Press the switch upwards.
The window closes until you release the
switch.
Watch the closing process to ensure that no one is injured.<
After the ignition has been switched off:You can continue using the electric power
windows for a limited period as long as no
one opens either of the doors.
If a door is opened during operation, the
opening/closing process stops immedi
-
ately.
When leaving the vehicle, always remove the ignition key from the lock
and remember to close the doors. Other
-
wise children could operate the power win
-
dows and injure themselves.<
Convenience operationFor convenience operation using the
remote control refer to page
26, for opera
-
tion via the door lock refer to page
27.
To initialize power windows
If the battery is disconnected, e.g. for changing batteries or vehicle storage,
reinitialize the power windows. Otherwise
the windows will not be lowered when the
door is opened.<
1. Close the doors2. Close both windows3. Hold both switches of the power win
-
dows up for approx. one second.
In the event of a system malfunction, please contact your MINI Dealer.<
Power windows in the MINI ConvertibleTo open:>Press button briefly:
The rear windows open automatically.
Pressing the switch again stops the oper
-
ation>Press the button:
The rear windows open until the switch
is released >Hold the button pressed:
The rear windows open completely; then
the front windows open.To close:Press the button.
The windows close until the switch is
released.
ProCarManuals.com
Page 36 of 165
34
GLASS SUNROOF, ELECTRIC
*
ROLLER SUN BLIND
*
Trap protectionIf, while closing, the glass sunroof encoun
-
ters resistance within roughly the last 8
in /
20
cm, the closing procedure is interrupted
and the roof reopens.
Despite the trap protection, be extremely careful that the travel path
of the sunroof is not obstructed whenever
it is closed. Otherwise, it is not guaranteed
that the closing procedure will be inter
-
rupted, for instance if the obstructions
offer very little resistance.
You can disable the trap protection by
pressing the switch past the pressure point
and holding it. When closing the sunroof
from the raised position, ensure that the
travel path of the sunroof is not obstructed
since the trap protection is not active in
this position.
26, for opera
-
tion via the door lock refer to page
27.
Manual opening and closing In the event of an electrical malfunction,
you can also open and close the glass sun
-
roof manually:1. Slide the cover panel towards the inte
-
rior and remove it
2. Use an Allen key to turn the glass sun
-
roof in the direction required.
1 Opening
1. Press the button in the handle, arrow
1
The cap is unlocked
2. Guide the roller sun blind towards the
back.2 Closing
1. Use the handle to pull the roller sun
blind forwards2. Engage the handle in the device,
arrow
2.
ProCarManuals.com
Page 38 of 165
36
CONVERTIBLE TOPOpening and closing1To close2To open
To conserve battery power, if possible operate the convertible top only
while the engine is running.
Before closing the convertible top, remove
any foreign objects from the windshield
frame. They could prevent the convertible
top from closing.
The loading aid must be locked and the lug
-
gage compartment cover must be in its
lower position, refer to page
86.<
In ignition key position 1 or higher, with the
vehicle at a standstill:1. Observe the safety precautions
described above2. Press the corresponding button for con
-
vertible top operation in order to open
the folding roof. Pressing the button
again opens the convertible top.
The side windows open when the button for convertible top operation
is pressed.<
Once the opening procedure is finished and
the indicator lamp has gone out, press and
hold the button for more than two seconds
to close the windows again. During the
closing procedure, the folding roof is also
closed.
If the convertible top is left open for a longer period of time, it may be nec
-
essary to support the first automatic clos
-
ing procedure manually.
If the convertible top stops just before the
closing procedure is finished, press against
the front convertible top frame from out
-
side in order to support the closing proce
-
dure while the button is pressed until the
procedure continues automatically.<
Indicator lamps>The indicator lamp lights up during con
-
vertible top operation until the opening
or closing procedure is completely fin
-
ished>The indicator lamp flashes after the but
-
ton has been released:
The opening or closing procedure is not
yet completely finished.
The procedure can be continued in the
desired direction by pressing the appro
-
priate button>The indicator lamp flashes rapidly. The
convertible top cannot be operated:
The luggage compartment cover is not in
its lower position, refer to page
86, or the
loading aid is not correctly locked, refer
to page
86.
ProCarManuals.com
Page 39 of 165
37
OVERVIEW REPAIRS OPERATIONCONTROLS DATA INDEX
CONVERTIBLE TOPInterruptionThe automatic movement is immediately
interrupted when the buttons for convert
-
ible top operation are released. The proce
-
dure can be continued in the desired direc
-
tion by pressing the appropriate buttons.Movement is also interrupted when there
is a mechanical blockage. In this case, in
order to operate the convertible top again:1. Turn off the ignition and then switch it
on again2. Press the button to continue the proce
-
dure in the desired direction.
If the convertible top can only be moved in one direction after several
consecutive attempts to operate it, the
convertible top system has overheated.
Allow the system to cool down for approx.
20
minutes while the ignition is switched
on.<
Before the closing procedure is fin
-
ished, do not close the side windows
with the power window buttons. Other
-
wise it is not ensured that the side win
-
dows will close properly against the rubber
seals of the convertible top.<
If the opening or closing procedure is inter
-
rupted by releasing the buttons, the con
-
vertible top stays in its current position for
several seconds before it slowly moves into
a more stable position. The procedure can
be continued by pressing the buttons.
Do not interrupt and restart the clos
-
ing procedure several times one after
another, or the fully automatic convertible
top mechanism could be damaged.<
Convenience operationFor convenience operation using the
remote control refer to page
26, for opera
-
tion via the door lock refer to page
27.
Manual closing in the event of an
electrical malfunction
Only close the convertible top manu
-
ally if it is absolutely necessary. Never
open it manually. Improper handling of the
convertible top can result in damage.
86
3. Remove the cover from the side panel on
the left-hand side4. Using the screwdriver from the onboard
tool kit, refer to page
120
, unscrew the
corresponding screw, arrow, in the direc
-
tion of the arrow by rotating it one and a
half turns.
ProCarManuals.com
Page 43 of 165
41
OVERVIEW REPAIRS OPERATIONCONTROLS DATA INDEX
SAFE SEATING POSITIONThe ideal seating position can make a vital
contribution to relaxed, relatively fatigue-
free driving. Together with the safety belts
and airbags, the seating position also plays
an important role in providing occupants
with maximum levels of passive safety in
an accident. To ensure that the safety sys
-
tems operate with optimal efficiency, we
strongly urge you to observe the instruc
-
tions contained in the following section.For additional information about trans
-
porting children safely, refer to page
48.
Sitting safely with airbags
Always maintain an adequate dis
-
tance between yourself and all of the
airbags. Always hold the steering wheel by
the rim with the hands at the 9 and
3
o'clock positions to keep any chance of
injury to hands or arms to an absolute min
-
imum, should the airbag be deployed.
No one and nothing is to come between
the airbags and the seat occupant. Do not
use the front passenger airbag cover as a
storage surface for objects of any kind.
Ensure that the front passenger is correctly
seated, i.e. that no feet or legs are propped
against the dashboad. Otherwise, leg injury
could result if the front passenger airbag
suddenly deployed. Never let an occupant's
head rest near or on a side airbag because
the inflating airbag could cause a serious or
fatal injury.
circumstances injury may result from con
-
tact with the airbags. In sensitive individu
-
als, the ignition and inflation noise may
induce a mild hearing loss that is usually
temporary. For airbag locations and additional infor
-
mation on airbags, refer to page
72.
Safe seating position with safety belt Fasten your safety belt before each drive.
Airbags are an additional safety device and
work in conjunction with the safety belts,
but do not replace them.Your vehicle is equipped with four seats,
each of which is provided with a safety belt.
At all times, occupants should sit upright and be properly restrained –
infants and small children in appropriate
child-restraint systems; larger children and
adults using the safety belts.
Expectant mothers should always wear
their safety belts, taking care to position
the lap belt against the lower hips, where it
will not exert pressure against the abdomi
-
nal area.
Never allow more than one person to wear
a single safety belt. Never allow infants or
small children to ride in a passenger's lap.
Do not route the belt across your neck, or
run it across sharp edges. Be sure that the
belt does not become caught or jammed.
Avoid twisting the belt while routing it
firmly across the hips and shoulder; wear it
as snugly against your body as possible and
do not allow it to rest against sharp or frag
-
ile objects. Otherwise, the belt could slide
over your hips in the event of a frontal
impact and cause abdominal injury. Avoid
wearing bulky clothing and pull on the lap
belt periodically to retension it over your
shoulder. Otherwise, the safety belt's
restraint effectiveness could be reduced.
45.
ProCarManuals.com
Page 46 of 165
44
HEAD RESTRAINTS
ENTRY TO THE REAR
Removal1. Pull up the head restraint, continuing
until it is at maximum extension2. Press the button and remove the head
restraint at the same time.Installation1. Press the button and at the same time
insert the head restraint in the reception
points2. Adjust the head restraint.
Easy entryThe Easy entry function includes a memory
for the longitudinal seat and the backrest
positions.1.
Push down the lever at the outside of the seat, arrow 1.
The backrest folds forward automati
-
cally
2. Push the seat forward, arrow
2.
Original position
Slide the seat back to its home posi
-
tion before folding back the backrest,
otherwise the seat is latched in at its cur
-
rent position. In this case, adjust the longi
-
tudinal position manually, refer to
page
42.<
1. Push the seat back into its home posi
-
tion
2. Fold the backrest back to the home posi
-
tion to lock the seat.
When returning the seat to the rear position, ensure that no one is
injured and that no objects are damaged.
Engage and lock both seats and backrests
into position prior to driving; otherwise
unexpected movement could increase the
risk of accident.<
ProCarManuals.com
Page 47 of 165
45
OVERVIEW REPAIRS OPERATIONCONTROLS DATA INDEX
SAFETY BELTS To closeMake sure you hear the lock engage in the
belt buckle.Indicator lamp
Lights up for several seconds or until the driver has fastened his or
her safety belt.
A signal
* also sounds depending on the
version.
To release1. Press the red button in the belt buckle2. Hold the belt3. Guide the belt back into its reel.
Safety belt height adjustment in the MINI Use the height adjustment mechanism to
adapt the safety belt to the ideal position
for your own body:Press the button and at the same time push
the entire unit upwards or downwards.Also observe the instructions on adjusting
the seats on page
41.
Safety belt height in the MINI
Convertible The seat belt height is adapted to your
body size if you are sitting correctly.
Damaged safety belts
If the safety belts are damaged or stretched in an accident: have the
safety belts including the seat-belt tension
-
ers and any child-restraint systems
replaced, and have the belt anchorages
checked. Have the necessary work carried
out only by a MINI Dealer or a workshop
that has specially trained personnel work
-
ing in accordance with the specifications of
the MINI manufacturer.<
ProCarManuals.com