key MINI Hardtop 2 Door 2004 Owner's Manual
[x] Cancel search | Manufacturer: MINI, Model Year: 2004, Model line: Hardtop 2 Door, Model: MINI Hardtop 2 Door 2004Pages: 152, PDF Size: 1.41 MB
Page 4 of 152

 
CONTENTS
 
2 
© 2003 Bayerische Motoren Werke 
Aktiengesellschaft
Munich, Germany
Reprinting, including excerpts, only with the 
written consent of BMW AG, Munich. 
Order No. 01 41 0 157 644
US English VIII/03
Printed in Germany
Printed on environmentally friendly paper, 
bleached without chlorine, suitable for recycling. 
NOTES  
About this Owner's Manual6
Symbols used6
Your individual vehicle6
Editorial notice7
For your own safety7
Symbol on vehicle parts8
Service and warranty8
Reporting safety defects9 
OVERVIEW 
Cockpit12
Display elements13
Display elements with navigation 
system14
Indicator and warning lamps15
Multifunction steering wheels18 
CONTROLS 
Opening and closing:  
Keys22
Central locking system23
Opening and closing: from outside23
Opening and closing: from inside26
Tailgate27
Electric power windows28
Glass sunroof, electric29
Roller sun blind30  
Adjustments:  
Safe seating position31
Seat adjustment32
Head restraints33
Entry to the rear34
Safety belts35
Seat heating35
Steering wheel36
Mirrors36
Vehicle Memory37
Transporting children safely38 
Page 24 of 152

22
KEYSThe key set of your MINI consists of three 
keys. 
1Two master keys with remote control
If the battery is discharged, please 
consult your MINI Dealer. For 
changing the battery, refer to the next 
section.<
2Spare key
For keeping in a safe place, e.g. in your 
wallet. This key is not intended for con-
stant use 
Changing batteryReplace if it is no longer possible to unlock 
the vehicle via the remote control.
Only use a battery of the type speci-
fied on the battery, CR 2032, and 
make absolutely sure that it is fitted in the 
correct position.<
1. Apply a screwdriver at the recess
2. Use the screwdriver to lever out the 
cover.
Return used batteries to a recycling 
point or your MINI Dealer.<
Initializing the master key with remote 
controlWhen you activate a master key with 
remote control – for example a replace-
ment or additional key, or after a battery 
change – it must be initialized.
This initialization can be performed in two 
ways:
Press button    or button    , refer to 
page 24, four times in succession
or
if the vehicle is unlocked:
1. Switch the ignition on briefly, position 2, 
and then off
2. Within 10 seconds, press button   
and button    , refer to page 24, in suc-
cession.
In the event of a system malfunction, 
please contact your MINI Dealer. You 
can also obtain replacement keys and bat-
teries there.< 
Page 25 of 152

23
OVERVIEW REPAIRS OPERATIONCONTROLS DATA INDEX
CENTRAL LOCKING SYSTEM OPENING AND CLOSING: FROM OUTSIDEThe conceptThe central locking system is ready for 
operation whenever the driver's door is 
closed. The doors, the tailgate and the fuel 
filler door are unlocked or locked.
The central locking system secures your 
MINI:
>When operated from the outside via the 
remote control as well as via the door 
lock
>When operated from the inside via a 
switch.
If operated from outside, the anti-theft sys-
tem is activated at the same time. This pre-
vents the doors from being unlocked via 
safety lock buttons or door handles.
In the event of an accident, the central lock-
ing system unlocks automatically. The haz-
ard warning system and interior lamps are 
also switched on.
Via remote controlThe remote control gives you an exception-
ally convenient method for unlocking and 
locking your vehicle. It also offers addi-
tional functions:
>To open the power windows and the 
glass sunroof, refer to page 24.
Locking/unlocking the vehicle automati-
cally activates/deactivates the anti-theft 
system and switches the interior lamps off/
on.
If the vehicle has been properly locked 
using the remote control, the hazard warn-
ing system flashes once.
When the vehicle is unlocked, the hazard 
warning system does not react.
Children might be able to lock the 
doors from the inside. Always take 
the vehicle keys with you so that the vehi-
cle can be opened again from the outside at 
any time.<
For US owners only The transmitter and receiver units comply 
with part 15 of the FCC, Federal Communi-
cations Commission, regulations. Opera-
tion is governed by the following: 
FCC ID: LX8765S
LX8765E
LX8CAS 
Compliance statement:
This device complies with part 15 of the 
FCC Rules. Operation is subject to the fol-
lowing two conditions:
>This device may not cause harmful inter-
ference, and
>this device must accept any interference 
received, including interference that may 
cause undesired operation.
Any unauthorized modifications or 
changes to these devices could void 
the user's authority to operate this equip-
ment.< 
Page 26 of 152

24
OPENING AND CLOSING: FROM OUTSIDE1Unlocking and convenience opening 
2Locking and securing
If the remote control does not react, 
the battery is discharged.
In the event of a system malfunction, 
please contact your MINI Dealer. You can 
also obtain replacement keys and batteries 
there.
Battery changing, refer to page 22.<
Unlocking1. Press button    once to unlock the 
driver's door only. 
The interior lamps are switched on and 
the hazard warning flashers flash twice
*
2. Press button    a second time to 
unlock the other door as well as the tail-
gate and the fuel filler door.
You can have this function activated/
deactivated by your MINI Dealer.<
If none of the vehicle doors are 
opened within 2 minutes, the central 
locking system locks the vehicle automati-
cally. The anti-theft system is not activated. 
To deadlock the vehicle, refer to the next 
column.<
You can have the vehicle's automatic 
locking feature activated/deacti-
vated.<
Convenience opening modePress and hold button    .
The power windows and glass sunroof are 
opened. 
You can have the opening of the win-
dows and glass sunroof with the 
remote control activated/deactivated.<
Convenience closing is not possible 
by means of the remote control.
Page 27 of 152

25
OVERVIEW REPAIRS OPERATIONCONTROLS DATA INDEX
OPENING AND CLOSING: FROM OUTSIDEMalfunctionsExternal systems or devices may cause local 
interference in the functions of the remote 
control.
In this case, unlock the vehicle via the door 
lock.
Via the door lock1. One turn of the key in the driver's 
door lock unlocks the driver's door only 
2. Turning the key a second time unlocks 
the other door, the tailgate and the fuel 
filler door.
You can have this function activated/
deactivated by your MINI Dealer.<
If the vehicle has been properly locked, the 
hazard warning system flashes once.
When the vehicle is unlocked, the hazard 
warning system flashes twice
*.
Manual operationIn the event of electrical malfunction:
The driver's door can be locked or unlocked 
by turning the key in the door lock all the 
way to the left or right.Convenience closing via the door lockYou can also close the power windows and 
the glass sunroof via the door lock.
With the door closed, hold the key in the 
locking position.
You can have the closing of the win-
dows and glass sunroof via the door 
lock activated/deactivated.< 
Page 28 of 152

26
OPENING AND CLOSING: FROM INSIDEWith this switch, you operate the central 
locking system when the doors are closed. 
The doors and tailgate are unlocked or 
locked only. The anti-theft system is not 
activated.
If the remote control has been used 
to unlock only the driver's door, refer 
to page 24, and you touch the switch when 
the driver's door is open, the other door, the 
tailgate, and the fuel filler door are 
unlocked. 
If the driver's door is closed, touching the 
switch locks it.<
To lockBriefly press the switch downward
or
push down the safety lock buttons on the 
doors. 
After you have driven off, the central 
locking system automatically locks 
your MINI once a certain speed has been 
reached.<
You can have this function activated/
deactivated by your MINI Dealer.<
Do not lock the safety lock buttons 
while driving, since these doors will 
not unlock automatically in the event of an 
accident. Children might be able to lock the 
doors from the inside. Always take the 
vehicle's keys with you so that you can 
open the vehicle again from the outside at 
any time.<
To unlock and open the doors1. Briefly press the switch upward
2. Pull the door handle above the armrest
or
pull the door handle for each door twice: 
to unlock first and then open. 
Page 30 of 152

28
ELECTRIC POWER WINDOWSTo open and close windows From ignition key position 1:
To open:
Press the switch downwards.
The window opens until you release the 
switch
or
briefly press the switch downwards.
The window opens automatically. 
Pressing the switch again stops the opera-
tion.
To close:
Press the switch upwards.
The window closes until you release the 
switch
or
with the engine running:
Briefly press the switch upwards.
The window closes automatically.
Pressing the switch again stops the opera-
tion.
The window on the front passenger's 
side cannot be closed automati-
cally.<
Watch during the closing process to 
be sure that no one is injured.<
After the ignition has been switched off:
You can continue using the electric power 
windows for a limited period as long as no 
one opens any of the doors. 
If a door is opened during operation, the 
opening/closing process stops immedi-
ately. 
When leaving the vehicle, always 
remove the ignition key from the lock 
and remember to close the doors, e.g. to 
prevent children from operating the power 
windows and injuring themselves.<
Convenience operationFor convenience operation using the 
remote control refer to page 24, for opera-
tion via the door lock refer to page 25.To initialize power windows 
If the battery is disconnected, e.g. for 
changing batteries or vehicle storage, 
re-initialize the power windows. Other-
wise the windows will not be lowered 
when the door is opened.<
1. Close the doors
2. Close both windows
3. Hold both switches of the power win-
dows up for approx. one second.
In the event of a system malfunction, 
please contact your MINI Dealer.< 
Page 31 of 152

29
OVERVIEW REPAIRS OPERATIONCONTROLS DATA INDEX
GLASS SUNROOF, ELECTRIC
* 
To prevent injuries, exercise care 
when closing the glass sunroof and 
keep it in your field of vision until it is shut. 
Make sure that the closing path of the sun-
roof is clear.
When leaving the vehicle, always remove 
the ignition key from the lock and remem-
ber to close the doors, e.g. to prevent chil-
dren from operating the sunroof and injur-
ing themselves. 
Be sure that adequate clearance is main-
tained for the opening path of the glass 
sunroof; otherwise damage can occur.<
Convenience operationFor convenience operation using the 
remote control refer to page 24, for opera-
tion via the door lock refer to page 25.
To raiseFrom ignition key position 1:
Press the switch
or
push the switch backwards to the resis-
tance point.To open and closeFrom ignition key position 1:
1. Push the switch in the desired direction 
until you feel resistance, and hold in this 
position
2. Release the switch when the desired 
sunroof position has been reached.
Do not use force to close the glass 
sunroof in its raised position, as dam-
age to the mechanism could result.<
After the ignition has been switched off:
You can continue using the electric power 
windows for a limited period as long as no 
one opens any of the doors. 
If a door is opened during operation, the 
opening/closing process stops immedi-
ately.
Automatic opening and closing From ignition key position 2:
To open:
Push the switch back past the point of 
resistance: 
The sunroof opens completely.
To close:
1. Press the switch past the pressure point: 
The sunroof closes to the raised position
2. Press the switch again and keep it 
depressed: 
The sunroof closes completely.
Touching the switch briefly during opening 
and closing stops the movement immedi-
ately. 
Page 32 of 152

30
GLASS SUNROOF, ELECTRIC
*
ROLLER SUN BLIND
* 
Pinch protection
If, while closing, the glass sunroof encoun-
ters resistance within roughly the last 8 in /
20 cm, the closing procedure is interrupted 
and the roof reopens.
Despite the pinch protection, be 
extremely careful that the travel path 
of the sunroof is not obstructed whenever 
it is closed. Otherwise, it is not guaranteed 
that the closing procedure will be inter-
rupted, for instance if the obstructions 
offer very little resistance.
You can disable the pinch protection by 
pressing the switch past the pressure point 
and holding it.<
When closing the sunroof from the 
raised position, ensure that the travel 
path of the sunroof is not obstructed since 
the pinch protection is not active in this 
position.<
Manual opening and closing In the event of an electrical malfunction, 
you can also open and close the glass sun-
roof manually:
1. Push the clock towards the interior and 
remove
2. Use an Allen key to turn the glass sun-
roof in the direction required.
1Opening1. Press the button in the handle, arrow 1
The cap is unlocked
2. Guide the roller sun blind towards the 
back.2Closing1. Use the handle to pull the roller sun 
blind forwards
2. Engage the handle in the device, 
arrow 2. 
Page 37 of 152

35
OVERVIEW REPAIRS OPERATIONCONTROLS DATA INDEX
SAFETY BELTS  SEAT HEATING
* 
To close
Make sure you hear the lock engage in the 
belt buckle.
Fasten safety belts: the warning 
lamp lights up until after the safety 
belt is fastened. An acoustic signal 
sounds for several seconds.To release1. Press the red button in the belt buckle
2. Hold the belt
3. Guide the belt back into its reel.
Safety belt height adjustmentUse the height adjustment mechanism to 
adapt the safety belt to the ideal position 
for your own body:
Press the button and at the same time push 
the entire unit upwards or downwards.
Also observe the instructions on adjusting 
the seats on page 31.Damaged safety belts
If the safety belts are damaged or 
stretched in an accident: have the 
safety belt system replaced by your MINI 
Dealer and the belt anchors checked, other-
wise the safety function can no longer be 
guaranteed. If a child-restraint system was 
in the vehicle during an accident, consult 
the manufacturer's instructions regarding 
replacement.<
The seat cushion and backrest can be 
heated with the ignition key in position 2.
Select the temperature setting:
Press each button briefly.
Direct deactivation from the second tem-
perature setting:
Press the button for a longer period.