parking sensors MITSUBISHI COLT 2006 Service Repair Manual

DESCRIPTION OF CONSTRUCTION AND OPERATION
ACTIVE STABILITY CONTROL SYSTEM (ASC)35C-17
DESCRIPTION OF CONSTRUCTION AND OPERATION
M2357000600037
Stability control operation
•ASC-ECU receives various kinds of information
from the wheel speed sensor, steering wheel
sensor, G and yaw rate sensor, pressure sensor,
stop lamp switch, brake fluid level switch, parking
brake switch, and engine ECU. When ECU deter
-
mines the vehicle runs in the oversteer or unders-
teer direction based on the signal sent from these
sensors, ASC-ECU drives each valve and pump
motor and controls the braking force to be applied
to the wheels.
•When the system increases the fluid pressure
automatically, it closes the cut valve to shut off
the pressure line to the suction valve, and drives
the pump motor. For example, when the vehicle
runs in the oversteer direction while turning to the
right, ASC-ECU supplies the brake fluid from the
pump to the front left wheel in order to apply the
braking force on it.
•ASC-ECU and the engine ECU communicate
with each other via CAN communication. When
the accelerator pedal is depressed too far, the
signal requesting the engine output reduction is
sent to the engine ECU so that the ASC controlla
-
bility can be secured.