AUX MITSUBISHI ECLIPSE 1990 Service Manual

I,?+7_-AUTOMATIC TRANSAXLE
- Transaxle Mechanism21-23
I IRS SP175003TC
: Torqueconverter
DC : Damper clutchCl : Front clutch
tPlanetan/
gear set
C2 : Rear clutchW : End clutchBl. : Kickdown brake82 : Low/reverse brake
OWC : One-way clutch
FS : Forward sun gearRS : Reverse sun gear
SP : Short pinion
LP : Long pinionAG : Annulus gearTRANSAXLE MECHANISM
fQlEMhGENERAL DESCRIPTION
The power train is composed of the torque-converter section
(which transfers the power from the engine to the transaxle)
and the shifting mechanism (which functions to provide the
most appropriate
rotational speed).
The damper clutch is installed in the torque-converter section.
and functions to reduce the ainount of power loss resulting
from slippage of the torque-converter.
The shifting mechanism is composed of three sets of multiple-
disc type clutches, as well as one set each of a multiple-disc
type brake and band brake, and a one-way clutch and a
Ravigneaux-type planetary gear set. The three sets of clutches
are the elements for control of the input to the planetary gear
set, and the two sets of brakes and the one-way clutch are the
elements for holding each part of the planetary gear set, or for
obstructing rotation.
As a result of the operation on these elements, the shifting
ratio that corresponds to the driving conditions is obtained by
regulating from what point of the
planetan/ gear set there will
be input, and where holding will be done.
Under what circumstances which elements will be activated is
as described in the table (“ELEMENT IN USE AT EACH
POSITION OF SELECTOR LEVER”) below.
ELEMENT IN USE AT EACH
POSITtON OF SELECTOR LEVER
S ylele~rOverdriveGearGearEngineParkingClutches
Brakescontrolmecha-
positionswitchpositionratiostartnismCl c2C3 OWC Bl 82
PNeutral-Possible0
RReverse2.17600
NNeutral-Possible
First
2.8460a
Second1.581l0DON
Third1 .ooo000
e
Fourth0.68500
First2.84600
DOFFSecond1.581ll
Third1 .ooo000
First2.846002
Second1.5810l
LFirst2.8460l

21-32AUTOMATIC TRANSAXLE - Transaxle Mechanism
PLANETARY GEAR
-.., ‘~ ~,.~.“.,
Reverse sun gear\ParkIng sprag
Carrier\
I\
i
\
Outer race.-End clutch shaftLow/reverse brake’s hub
Short pmlon17502L
The planetary gear set incorporated in
thus transaxle
is of the Ravigne’aux-type, and consists of a forward
sun gear, a reverse sun gear, a short prnion. a long
pinion, a carrier to support both pinions, and an
annulus gear.
The reverse sun gear is connected to the front
clutch retainer via the
kickdown drum, while the
forward sun gear is connected to the rear
clutchhub.
The carrier is built in one unit with the low reverse
brake’s hub and the outer race of the one-way
clutch. The carrier is connected to the end clutch via
the end clutch shaft.
The
annulus gear, to which the output flange isconnected, conveys driving force to the transfer
drive gear installed on the output flange. And the
parking sprag is provided on the outer circumfer-
ence of the
annulus gear.
Number of forward sun gear teeth
Number of reverse sun gear teeth
2634
INumber of short pinron teethI22 1Number of long pinion -teeth
Number of
annulus gear teeth74 1c-’