ignition MITSUBISHI ECLIPSE 2011 4.G Service Manual

MITSUBISHI ECLIPSE 2011 4.G Service Manual ECLIPSE 2011 4.G MITSUBISHI MITSUBISHI https://www.carmanualsonline.info/img/19/7424/w960_7424-0.png MITSUBISHI ECLIPSE 2011 4.G Service Manual

Page 169 of 494

MITSUBISHI ECLIPSE 2011 4.G Service Manual 3-74 Features and controls
3
NOTEIf the brake pedal is not depressed and held, the shift-lock
device activates to prevent the selector lever from being
moved from the “P” (PARK) position.
Selecto

Page 178 of 494

MITSUBISHI ECLIPSE 2011 4.G Service Manual Features and controls
3-83
3
Anti-lock braking system warning light
N00531600313
This light comes on in the event of a malfunction in the anti-
lock braking system. It will also come on as a self-chec

Page 180 of 494

MITSUBISHI ECLIPSE 2011 4.G Service Manual Features and controls
3-85
3 Active stability control (ASC)
N00559100088
The active stability control (ASC) takes overall control of the
anti-lock braking system, traction control function and skid
co

Page 181 of 494

MITSUBISHI ECLIPSE 2011 4.G Service Manual 3-86 Features and controls
3
Skid control function
N00546800036
The skid control function is designed to help the driver main-
tain control of the vehicle on slippery roads or during rapid
steering ma

Page 182 of 494

MITSUBISHI ECLIPSE 2011 4.G Service Manual Features and controls
3-87
3
NOTEUsing the ASC OFF switch turns off both the skid control
function and the traction control function.
When moving out of mud, sand or fresh snow, pressing
the acceler

Page 183 of 494

MITSUBISHI ECLIPSE 2011 4.G Service Manual 3-88 Features and controls
3
ASC indicator, ASC OFF indicator
N00546900011
The indicators should illuminate when the ignition key is
turned to the “ON” position, and should turn off after a few
se

Page 184 of 494

MITSUBISHI ECLIPSE 2011 4.G Service Manual Features and controls
3-89
3
[If the   indicator blinks]• If the temperature of the braking system increases
excessively, due to continuous brake control on a
slippery road surface, the   indicator

Page 187 of 494

MITSUBISHI ECLIPSE 2011 4.G Service Manual 3-92 Features and controls
3
To activate
N00518400170
1. Momentarily push in the main switch (A) at the end of the
cruise control lever.2. Pull the lever (B) down while driving at the desired speed.
N

Page 191 of 494

MITSUBISHI ECLIPSE 2011 4.G Service Manual 3-96 Features and controls
3
When your speed slows to about 25 mph (40 km/h) or
less.
When the active stability control starts operating.
Refer to “Active stability control (ASC)” on page 3-85.

Page 193 of 494

MITSUBISHI ECLIPSE 2011 4.G Service Manual 3-98 Features and controls
3
Tire pressure monitoring system warning light
N00554800093
When the ignition key is turned to the “ON” position, this light
normally illuminates and goes off a few sec