Time MITSUBISHI GALANT 2011 9.G MMCS Manual

Setup 2-18Windshield WipersSettings related to the windshield wipers can be
performed.
eng_331
Speed-sensitive Operation
[On]
The speed of the windshield wipers
changes according to the vehicle
speed.
[Off]
The speed of the windshield wipers
does not change according to the
vehicle speed.
Rear Wiper
Intermittent
Interval[2sec]: The interval is 2 seconds.
[4sec]: The interval is 4 seconds.
[8sec]: The interval is 8 seconds.
[16sec]: The interval is 16 seconds.
Continuous
Operation[On]: The windshield wipers
operate continuously.
[Off]: The windshield wipers do not
operate continuously.
Exterior Lights / Interior LightsSettings related to the exterior lights/interior lights
can be performed.
eng_329
Headlight Auto-cutout Function
[On] Turns off the headlights automatically.
[Off]
Does not turn off the headlights automatically.
Headlight On Condition
[Before
Ignition Off]Goes off when the ignition switch is
turned OFF.
[Anytime]Stays on even when the ignition
switch is turned OFF.Interior Light Auto-cutout Time
[3 min] Goes off after 3 minutes.
[30 min] Goes off after 30 minutes.
[60 min] Goes off after 60 minutes.
[Not-
operated]Does not go off automatically.Duration Dome Light Remains On after Door is Closed[180 sec] Goes off after 180 seconds.
[120 sec] Goes off after 120 seconds.
[60 sec] Goes off after 60 seconds.
[30 sec] Goes off after 30 seconds.
[15 sec] Goes off after 15 seconds.
[0 sec] Goes off when the door is closed.
Door-ajar Warning / Turn SignalSettings related to the door-ajar warning/turn signal
can be performed.
eng_327
Door - ajar Warning Chime
[On] Warning chimes when the door is ajar.
[Off] Warning does not chime when the door
is ajar.Turn Signal Audible
[On] The turn signal sound is on.
[Off] The turn signal sound is off.

Maintenance 2-20
Maintenance
Maintenance timing alerts can be set, such
as for the engine oil and oil filter.
1 Display the Main Menu
2 Touch [Maintenance]
eng_507

eng_490
The maintenance list screen is displayed.NOTE Items that have reached the maintenance timing
are displayed in yellow.
Setting the Maintenance Timing
An item can be selected to set the
maintenance timing.
1 On the maintenance list screen,
touch the item to be set
eng_490
The maintenance information screen of the
selected item is displayed. 2 Touch [Setup]
eng_550
The maintenance setting screen is displayed.
NOTE “Date” displays the date on which the maintenance
was performed. “Changed at Odometer” displays the odometer
value at the time of maintenance.
 “Remaining Distance” displays the distance that
remains until the next maintenance.
 Touch [ ] or [ ] of “Page” to scroll through
the pages to different items. 3 Touch [ - ] or [ + ] of “Distance
Setting” or “Date Setting” to set the
distance to or the date of the next
maintenance.
eng_475
NOTE Touch [Default] to return to the factory settings.
 “Distance Setting” is used to set the distance
from the performance of maintenance to the
time of the next maintenance.
 “Date Setting” is used to set the number of
months from the performance of maintenance to
the time of the next maintenance. 4 Touch [Back]
The maintenance timing settings are completed.

Menu Screens (Four Menus) 3-4
Explanation of Common Buttons
This section explains the common
buttons that appear in all the menu
screens.
Displays the current location screen.Returns to the previous screen.Scrolls forward through a list one line
at a time.Scrolls forward through a list one
page at a time.Scrolls back through a list one line at
a time.Scrolls back through a list one page
at a time.

Map Screen 3-5
Basic Operation
Map Screen
In the map screen, there is a “Current
Location Screen” that displays the current
position of one’s own vehicle, and a “Scroll
Screen” that is displayed through the results
of a search, or by scrolling for a location
to view. In the “Scroll Screen”, a map is
displayed with the cursor at the center.
Current Location Screen
eng_173
1) Orientation Mark
Shows the orientation of the displayed map.
2) Destination/Way Point Direction Icon
Shows the direction to the destination or way
point. Only displayed when a route has been set.3) Map Scale
Shows the scale of the displayed map.
4) Street Name
When a route is set, displays the name of the
street currently being traveled.
5) Guidance Route
When a route is set, shows the route to the
destination.
6) Vehicle Mark
Shows the position of the vehicle being driven.
7) Destination/Way Point Information Icon
When a route is set, shows the distance and
time to the destination or way point.
8) Direction Box
When a route is set, displays the icon or name
of the next street that will be reached.9) Maneuver Icon
When a route is set, displays whether to turn
left or right at the next intersection of the
guidance, and the distance to this intersection.
7) 9) 8)
2)1)
3)
4)6)5)

Changing the Map Display 3-6Changing the Map DisplayChanging the display method of the map
screen.
Changing the Scale
The scale of the map display can be
changed within a range of 1/32 miles
(50m) to 60 miles (100km).
NOTE The scale display unit can be changed from
“mile” to “km”.
>>> “Unit Distance” (7-1)
One Map Mode
1 Touch [
] to display a wide
area
eng_166
A wider area can be viewed each time [
] is
touched.
2
Touch [
] to display a detailed
area
eng_176
A more detailed area can be viewed each time [
]
is touched.
NOTE Touch and hold [
] or [
] to change the
scale quickly.
Two Maps ModeWhen two maps are displayed, the left and right
screens can be changed to different scales.
The scale of the right map is changed with the
same operations as when there is only one map.
This section explains how to change the scale of
the left map. 1 Touch the map section of the
left map
eng_132

eng_167
A scale bar is displayed. 2 Touch [
] to display a wide
area
eng_168
A wider area can be viewed each time [
] is
touched.
3
Touch [
] to display a detailed
area
A more detailed area can be viewed each time [
]
is touched.
NOTE Perform these operations while the scale bar is
being displayed.
 Touch and hold [
] or [
] to change the
scale quickly.

Changing the Map Display 3-7
Basic Operation
Changing the Map Orientation
The map orientation can be changed
according to various conditions.
1 Touch the orientation button
Orientation Mark
eng_169
Heading-Up

eng_170
North-Up
Each time the orientation mark is touched, the
map orientation is changed in the sequence
“Heading-Up” “North-Up” “Auto”.
Map OrientationMark Name Display Contents (Red)Heading-
UpThe map is rotated so
that the vehicle is always
facing the front (up). (Red) North-UpThe vehicle mark is
rotated so that the north
of the map is always
facing the front (up). (Blue)or (Blue)
Auto
“Heading-Up” or “North-Up”
is selected automatically,
depending on the map
scale.“Heading-Up” is selected
for a scale of 1/16 miles
(100m) or less, and “North-
Up” is selected for a scale
of 1/8 miles (250m) or more.
During Two Maps DisplayWhen two maps are displayed, the left and right
maps are linked together, with either “Heading-
Up” or “North-Up” selected for both. However,
when “Auto” is set, different orientations can be
selected for the left and right maps, depending
on the scale.
Changing to a Two Maps Display
The screen can be divided between
left and right to display a wide area
map and a detailed map at the same
time.
1
Touch [Navi Menu] on the current
location screen
2 Touch [Setup]
eng_002
3 Touch [Screen]
eng_097
The screen options screen is displayed.
Continued on the Next Page

Listening to the Voice Guide 3-13
Basic Operation
Listening to the Voice GuideThe voice guide provides information
regarding the distance to the next
intersection on the route and the direction
you should turn.
The voice guide comes on automatically
when approaching in intersection, but can
be activated at any time by the following
operation:
1 Touch [Voice] on the current
location screen
eng_185

eng_186
The intersection guidance map is displayed, and
voice guidance is performed.
Changing the Voice Volume
Adjusting the volume of the system
voice.
1
Touch [Navi Menu] on the current
location screen
2 Touch [Setup]
eng_002
The setup screen is displayed. 3 Touch [ - ] or [ + ] of “Volume”
eng_097
The volume decreases each time [ - ] is touched.
The volume increases each time [ + ] is touched.

View Route 5-1
Routes
Routes
View Route
The created route can be viewed using
various methods.
1 Touch [Route] on the current
location screen
eng_181
The route menu is displayed. 2 Touch [View Route]
eng_070

Location Information Button
Route Option Icon
eng_061
The view route screen is displayed.NOTE Touch [
] of the location information button
or [1], [2]..., to display the map of the vicinity of
the destination and way point.Route Option Icon
The route option icon can be used to
view with icons the information set in “Route Options” (7-6)
.
A) Route Priority
Indicates “Fast”.Indicates “Short”.Indicates “Easy”.B) Minimize Freeway
Indicates “Yes”.Indicates “No”.
C) Minimize Toll RoadsIndicates “Yes”.Indicates “No”.
D) Minimize FerriesIndicates “Yes”.Indicates “No”.
E) Avoid Selected AreaIndicates “Yes”.Indicates “No”.
F) Avoid Time Restricted RoadsIndicates “Yes”.Indicates “No”.
A) B) C) D) E) F)

Editing the Route (Itinerary) 5-7
Routes
Adding a Way Point
A way point can be added to the
current route.
1 Touch [Add] in the itinerary list
screen
(5-5)
The destination search screen is displayed. 2
Touch one of the search methods
to search for the location
eng_079
Refer to the following pages to search for the
location.>>> [Address/Intersection] (4-3)
>>> [Point of Interest (POI) Name] (4-6)
>>> [Advanced] (4-8)
>>> [Previous 20] (4-7)
>>> [Address Book] (4-2)
3 Touch [Itinerary List]
eng_080
4
Touch [Add] in the sequence
position in which it is to be visited
eng_081
The searched location is added to the route as a
way point. 5 Touch [Start]
eng_082
Guidance starts for the changed route.
Deleting
A destination or way point can be
deleted.
1 Touch [Delete] in the itinerary
list screen
(5-5)
The delete itinerary screen is displayed. 2 Touch the location to delete
eng_083
NOTE The locations targeted for deletion are displayed
with a black highlight. Touch a location again to
remove it from the deletion target.
 Multiple locations can be selected at the same
time.
 Touch [All] to delete all locations at the same
time.
Continued on the Next Page

Editing a Location 6-5
Address Book
5 Touch [Done]
eng_103
The information change is completed.
Deleting
Deleting a stored location.
1 Touch [Delete] of “Address
Book” in the personal settings
screen
(6-4)
2 Touch the stored location to
delete
eng_104
NOTE The stored locations targeted for deletion are
displayed with a black highlight.
Touch a location again to remove it from the
deletion target.
 Multiple locations can be selected at the same
time.
 Touch [All] to delete all stored locations at the
same time. 3 Touch [Done]
eng_105
4 Touch [Yes]
eng_106
The selected stored locations are deleted.