window MITSUBISHI LANCER EVOLUTION 2013 10.G Workshop Manual

Vehicle care and maintenance
7-45
7
5. Insert a new fuse of the same capacity securely into the
appropriate slot.
Replacement of light bulbs
N00942900219
Before replacing a bulb, be sure the light is off. Do not touch
the glass part of the new bulb with your bare fingers; the oil
from your skin will stay on the glass and dim or destroy the
bulb when it gets hot.NOTE
If you are unsure of how to carry out the work as required,
it is recommended that these procedures be carried out by
an authorized Mitsubishi Motors dealer or a repair facility
of your choice.

Be careful not to scratch the vehicle body when removing
a light and lens.

When it rains, or when the vehicle has been washed, the
inside of the lens sometimes becomes temporarily foggy.
This is the same phenomenon as when window glass mists
up on a humid day, and does not indicate a functional
problem.
When the light is switched on, the heat will remove the
fog. However, if water gathers inside the light, please
have it checked by an authorized Mitsubishi Motors
dealer or a repair facility of your choice.
CAUTION
!
Never use a fuse with a capacity greater than the one
listed or any substitute, such as wire, foil etc. This
would cause the circuit wiring to heat up and could
cause a fire.
If the replacement fuse blows again after a short
time, have the electrical system checked by an
authorized Mitsubishi Motors dealer or a repair
facility of your choice to find and correct the cause.
CAUTION
!
Bulbs are extremely hot immediately after being
turned off.
When replacing a bulb, wait for it to cool sufficiently
before touching it. You could otherwise be burned.
BK0150900US.book 45 ページ ２０１２年５月７日　月曜日　午後１２時９分

Vehicle care and maintenance
7-71
7 Vehicle care precautions
N00945100153
In order to maintain the value of your vehicle, perform regular
maintenance using the proper materials and procedures. Be
sure to use only those materials and procedures that meet your
local environmental pollution control regulations. Choose the
materials you will use carefully, to be sure that they do not con-
tain corrosives. If you are not sure, contact an authorized
Mitsubishi Motors dealer for help in choosing these materials. These can all be dangerous, and they all can damage your vehi-
cle.
CAUTION
!
Cleaning products can be dangerous. Some are poi-
sonous. Others are highly flammable. Some are dan-
gerous if you breathe their fumes in a closed space.
When you use anything in a container to clean your
vehicle, be sure to follow the instructions. Always
open your vehicle doors or windows when you’re
cleaning the inside. Never use the following chemi-
cals to clean your vehicle:
• Gasoline
• Carbon Tetrachloride
• Benzine
• Kerosene
• Naphtha
• Acetone
• Turpentine
• Paint Thinner
• Lacquer Thinner
• Nail Polish Remover
BK0150900US.book 71 ページ ２０１２年５月７日　月曜日　午後１２時９分

Vehicle care and maintenance
7-77
7
Aluminum wheels
N00946500109
1. Remove dirt using a wet sponge.
2. Use a mild detergent on any dirt that cannot be removed
easily with water.
Rinse off the detergent after washing the wheel.
3. Dry the wheel thoroughly using a chamois leather or a soft
cloth.Window glass
N00946600012
The window glass can usually be cleaned using only a sponge
and water. Glass cleaner can be used to remove wax, oil,
grease, dead insects, etc. After washing the glass, wipe it dry
with a clean, dry, soft cloth.
Wiper blades
N00946700084
Use a soft cloth and glass cleaner to remove grease, dead
insects, etc., from the wiper blades.
Replace the wiper blades when they no longer clean the wind-
shield properly.Cleaning the sunroof
(if so equipped)
N00946800072
Clean the inside of the sunroof with a soft cloth. Hard deposits
should be wiped away with a cloth dipped in warm, neutral
detergent solution. Wipe away the solution with a sponge
dipped in fresh water.NOTE
The surface treatment on the inside of the glass may be
removed if a hard cloth or organic solvent is used.
CAUTION
!
Do not use a brush or other hard implement on the
wheels.
Doing so could scratch the wheels.
Do not use any cleaner that contains an abrasive
substance or is acidic or alkaline. Doing so could
cause the coating on the wheels to peel or become
discolored or stained.
Do not directly apply hot water using a steam
cleaner or by any other means.
Contact with seawater or road salt used for de-icing
can cause corrosion. Rinse off such substances as
soon as possible.
BK0150900US.book 77 ページ ２０１２年５月７日　月曜日　午後１２時９分

Alphabetical index
2Brake
Anti-lock braking system 3-126
Braking 4-7
Fluid 7-16
,9-9
Hose 7-33
Parking brake 3-76
Parking brake lever stroke 7-29
Pedal 3-134
Pedal free play 7-29
Power brakes 3-135
Service brake 3-134
Brake assist 3-136
Braking
Warning lights 3-198
Break-in period 3-2
Bulb capacity 7-46
C
California Perchlorate Materials Requirements 1-9
Capacities 9-9
Card holder 3-257
,3-265
Cargo loads 4-13
Catalytic converter 7-3
Certification label 9-5
Charging system warning light 3-200
Chassis number 9-3
Child restraints 2-22
Child safety locks for rear door 3-58Cleaning
Inside of your vehicle 7-72
Outside of your vehicle 7-73
Clutch
Clutch pedal operation 3-93
Fluid 7-16
,9-9
Pedal free play 7-28
Coat hooks 3-270
Combination headlights and dimmer switch
Headlight reminder buzzer 3-207
Light auto-cutout function 3-206
Consumer information 8-2
Coolant (engine) 7-10
,9-9
Cruise control 3-137
Cup holder 3-268
D
Daytime running lights
Bulb capacity 7-46
Replacement 7-54
Defogger (rear window) 3-222
Defrosting or defogging (windshield, door windows) 5-20
,5-
30
Digital clock 5-119
Dimensions 9-5
Dimmer (high/low beam change) 3-208
Disc brake pads 7-33
BK0150900US.book 2 ページ ２０１２年５月７日　月曜日　午後１２時９分

Alphabetical index
3
Dome light (Rear)
Bulb capacity 7-48
Replacement 7-69
Switch 3-261
Dome light/Reading lights
Bulb capacity 7-48
Replacement 7-67
Switch 3-260
Doors
Lock 3-52
Power door locks 3-56
Driving during cold weather 4-6
Driving, alcohol and drugs 4-2
E
Electric rear window defogger switch 3-222
Electronic immobilizer (Anti-theft starting system) 3-4
,3-41
Emission-control system maintenance 7-31
Engine
Compartment 7-7
Coolant 7-10
,9-9
Hood 7-4
Oil and oil filter 7-7
,9-9
Overheating 6-6
Serial number 9-3
Specifications 9-7
Engine coolant temperature display 3-164
Engine malfunction indicator 3-199
Exhaust system 7-34External audio input connector 5-103
F
Filling the fuel tank 1-4
Floor console box 3-267
Floor mat 4-3
Fluid
AWC control fluid 7-15
,9-9
AYC fluid 9-9
Brake fluid 7-16
,9-9
Clutch fluid 7-16,9-9
Engine coolant 7-10,9-9
Power steering fluid 7-17
,9-9
Twin Clutch SST 9-9
Twin Clutch SST fluid 7-14,9-9
Washer fluid 7-16
,9-9
Fluid capacities and lubricants 9-9
Fog lights
Bulb capacity 7-46
Free-hand advanced security transmitter (F.A.S.T.-key) 3-17
Front console boxes 3-266
Front console tray 3-265
Front fog lights
Bulb capacity 7-46
Indicators 3-198
Replacement 7-60
Switch 3-213
Front seats 2-3
BK0150900US.book 3 ページ ２０１２年５月７日　月曜日　午後１２時９分

Alphabetical index
6Power outlet 3-258
Power steering
Fluid 7-17
,9-9
System 3-137
Power windows 3-69
Lock switch 3-72
Main switch 3-70
Safety mechanism 3-71
Sub switch 3-71
Timer function 3-71
Puncture (Tire changing) 6-9
R
Radio
AM/FM electronically tuned radio with CD player 5-33
AM/FM electronically tuned radio with 6 CD autochanger 5-
52
General information about your radio 5-120
Rain sensor 3-217
Reading light
Bulb capacity 7-48
Replacement 7-67
Rear axle oil 7-15
Rear side-marker lights
Bulb capacity 7-46
Replacement 7-62
Rear turn signal lights
Bulb capacity 7-46
Replacement 7-62Rearview mirror
Inside 3-79
Outside 3-81
Refrigerant (air conditioning) 9-9
Replacement of light bulbs 7-45
Replacing tires and wheels 7-24
Reporting Safety Defects 8-3
Rheostat 3-153
S
Safe driving techniques 4-6
S-AWC (Super-All Wheel Control) 3-120
ACD (Active center differential system) 3-121
AYC (Active yaw control system) 3-121
Seat 2-2
Arm rest 2-8
Front seats 2-3
Head restraints 2-8
Heated seats 2-6
Rear seats 2-8
Seats and restraint systems 2-3
BK0150900US.book 6 ページ ２０１２年５月７日　月曜日　午後１２時９分